CERTAIN REPAIR TO OTM AND MD ACCN OF ARC 11 WEU MDC DAD MES AT HAPPY VALLEY UNDER GE SHILLONG

Amount

Demolition of plain cement concrete in ground floors or above ground floor and paving n.exc 15 cm thickness (Below or above ground level) complete all as specified and directed.

Demolition of brick work or solid concrete block masonary or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling of timber scantling 40 sqcm over in section in any position (unframed work) complete all as specified and as directed..

Dismantling timber fillets, rails, posts rafter purlins, etc., under 40 Sqcm in sectional area complete all as specified and directed

Taking down chowkhat with shutter (without taking off shutter from the frame) n exc 1.5Sqm each complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) exc 1.5Sqm but n exc 4 sqm each complete all as specified and directed.

Taking down shutters of any description n.exc 1.0 sqm each complete all as directed

Taking down shutters of any description exc.1.0 Sqm and n.exc 2.0 sqm each complete all as directed

M&L for PCC (1:5:10) type E2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 using 40mm graded crushed stone aggregate as in surface channel and drain, complete all as specified and as directed.

M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, miltred/stopped ends etc. complete all as specified and as directed.

M&L for 75 mm thick PCC (1:2:4) type B2 using 40mm graded crushed stone aggregate as in path finished even and smooth without using extra cement complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded crushed stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B0 using 12.5mm graded crushed stone aggregate as in levelling course prior to floor finishes finishing even and fair complete all as specified and directed.

M&L for precast cement concrete block masonary with solid blocks, exc 10cm in width or girth, made out of PCC (1:3:6) type C1 using 20mm graded crushed stone aggregate, and set in cement mortar (1:6) complete all as specified and directed.

M&L for precast RCC 1:2:4 type B1 using 20 mm graded crushed stone aggregates as in cover slab for soakage well / manhole and similar works supported on walls and set in cement mortar 1:6 complete all as specified and directed..

M & L for mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for water proofing treatment to sunken portion of RCC slab with the following courses of treatment/specification :- (i) 15 mm thick screed bed or bedding layer of mortar 1:4 in for laying as in sunken portion with mixing of WPC and surface finished fare and smooth without using extra cement. (Note: WPC shall be measured and paid for under separate items) (ii) Preparation of plastered roof surface and applying one coat of cold bituminous primer @ 0.25 ltr /Sqm conforming to IS:3384-1986. (iii) Application of APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) by torch application over bituminous primer as specified. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. Note:-The work of sunken portion treatment shall be got executed through expert team of manufacturer or authorised applicator of manufacturer. Contractor shall submit documentary evidence in support of applicator engaged for approval of GE.

S & F of 0.63 mm thick galvanized corrugated iron (CGI) sheeting with two corrugation side lap sheets having zinc coating @ 120 GSM on both sides, fixed with L-type or J-type or cranked hook bolts as in roof covering etc including dismantling of unserviceable roof sheetng of any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Refixing only 0.63 mm thick galvanized corrugated iron (CGI) sheeting with two corrugation side lap sheets having zinc coating @ 120 GSM on both sides, fixed with L-type or J-type or cranked hook bolts as in roof covering etc. complete all as specified and directed. (NOTE: Serviceable sheets obtained from dismantling under Ser Item No. 21 here-in-above shall be reused under this item)

S & F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with having zinc coating @ 120 GSM on both sides complete all as specifid and as directed.

M&L for 2nd class hard wood in scantling clean sawn timber fixed complete all as specified and directed.

S&F 20mm thick 2nd class hard wood boarding fixed with nails as in eaves board planed one side with butt joint including dismantling old unserviceable boarding of any description complete all as specified andas directed.

M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class hardwood 35mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

M&L for 2nd class hardwood glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed.

M&L for 2nd class hardwood glazed and skeleton shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

Supply and Fix Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F in repair Steel pegs for steel windows all as specified and directed

S&F in repair Steel handle for steel windows all as specified and directed

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (Note : Any damage caused to existing flooring while fixing frames shall be made good by the contractor to match with existing floor without any extra cost)

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F for 75mm Butt hinges, mild steel medium weight, cold rolled and fixed complete all as specified and directed

S&F for 100mm Butt hinges, mild steel medium weight, cold rolled and fixed complete all as specified and directed

S&F100mm size MS pressed handle oval type stove enameled block complete all as specified and directed.

S&F150mm size MS pressed handle oval type stove enameled block complete all as specified and directed.

S&F 150mm size MS barrel tower bolt stone enamelled black with bright bolt ISI marked complete all as specified and directed.

S&F 200mm size MS barrel tower bolt stone enamelled black with bright bolt ISI marked complete all as specified and directed.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame including taking out old wooden beads complete all as specified and directed.

S&F Sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane including fixed with wooden beads/glazing pins or spring clips in wooden or metal frames complete all as specified and as directed.

S&F one side frosted glass 3 mm thick, glazing with oil putty in square n.exc 0.5 Sqm in each pane including fixed with wooden beads/glazing pins or spring clips in wooden or metal frames complete all as specified and as directed.

S&F Sheet glass 4.8 mm thick, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane including fixed with wooden beads/glazing pins or spring clips in wooden or metal frames complete all as specified and as directed.

S&F Sheet glass 4.8 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane including fixed with wooden beads/glazing pins or spring clips in wooden or metal frames complete all as specified and as directed.

S&F 18/19 mm thick block board grade 1 quality exterior grade commercial type, fixed with screws to timber frame complete all as specified and directed.

S&F 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

M&L for 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn secured with nails or brads of sectional area exc. 13 & n. exc. 25 Sqcm complete all as specified and directed.

M&L for 2nd class hard wood plain fillets bullnosed, splayed, chamfered or rounded on one edge or face in section clean sawn, fixed with screws sec area exc 6 sqcm n exc 13 sqcm complete all as specified and directed.

M&L for 2nd class hard wood plain fillets bullnosed, splayed, chamfered or rounded on one edge or face in section clean sawn, fixed with screws sec area exc 3 sqcm n exc 6 sqcm complete all as specified and directed.

S&F Magnet catches and striking plate for cupboard shutter including letting in all as specified and as directed

M&L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with nails as in ceiling,including dismantling old unserviceable ceilling boards of any description including cover fillets complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and jointed in any mortar of any description complete all as specified and directed.

M& L for machine cut kota stone slab flooring 20-25 mm thick laid over and including 20 mm thick cement screed base in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M& L for Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick cement screed/backing coat in CM 1:4 and jointed with jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L Marble work (Makarana White) 18 to 20 mm thick (table rubbed and polished) in floors, steps, jambs, pillars, windowcills, cooking platforms and like laid over and including15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over including cutting and polishing all as specified and directed.

M&L for Joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for Joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for Joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

M&L for 18/20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite complete including dismantling the existing slab all as directed.

M&L for rounding to edges of stone slabs one edge, such as in steps cooking platform, and other similar situation complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. including removal of rubbish from site of work complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:4 in two layers, first 10 mm thick base layer & finishing 5 mm thick with approved water proofing compound @ 3% by the weight of cement or as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be measured and paid separately here-in-after.

Supply on integral water proofing compound.

M&L 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surface, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 5mm thick rendering in CM (1:3) on fair faces of concrete surfaces of ceiling, finished even & smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surface of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L for preparation of old decorated surface of wall and applying two coats of white wash complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, n exc 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm bore GI tubing, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm bore GI tubing, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing 15mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Refixing 20mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Cutting chases, pinning in concrete block work making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth. complete all as specified and directed.

S&F in repairs 15mm dia Bib taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm dia stop valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm dia stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 90gms) complete all as specified and directed.

S&F in repairs 15mm dia bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 90gms) complete all as specified and directed.

S&F in repairs 15mm dia brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and directed.

S & F in repair Vitreous china squatting pan "Orissa" Pattern of size 580x 440 mm white with PVC ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position in floor and embedded in cushion of PCC type E2 ( 1:5:10, using 40 mm graded stone aggregates), and finishing the top surfaces to match with the existing flooring complete all as specified and directed.

S&F in repairs Vitreous China wash down water down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete aal as specified and directed.

S & F in repairs Vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32 mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450 mm length with PTMT nuts complete all as specified and as directed.

S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and provision of 32mm PVC flush pipe of required length and making connections complete all as specified and directed.

S&F in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repairs 32 mm bore PVC flexible Waste pipe to WHB/urinals/Sink, 600mm long complete all as specified and as directed.

S&F tubular towel rail, brass chromium plated, 20mm dia, D type, 600mm long between flanges complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs sinks made of stainless steel, 1mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm & bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair CP single lever sink Mixer with swinging spout on upper side (wall mounted model) with connected legs & wall flanges complete all as specified and directed. (Model No. Jaguar Cat Part No. LYR-38165 or equivalent in Marc/Parryware/Prayag/Hindware)

S&F in repair CP Single Lever Basin Mixer without Popup Waste with 450mm Long Braided Hoses complete all as specified and directed. (Model No. Jaguar Cat Part No. LYR-38001B or equivalent in Marc/Parryware/Prayag/Hindware)

S & F Stainless steel kitchen plate rack of size 36'' X 36 '' X 10'' made out of stainless steel sheet of 1.00 mm with all accessories including taking down old unservicable one etc complete all as specified and directed.

S&F in repairs soap dish holder complete all as specified and directed. ( Model No. Jaquar Cat Part No:- AKP-35731P or equivalent in Marc/Hindware/Parryware).

S&F in repairs corner glass shelf with bracket complete all as specified and directed. (Model No. Jaquar Cat Part No:- ACN-1173 or equivalent in Marc/Parryware/Prayag

S&F in repair stainless steel decorative pattern holder/end brackets suitable for drapery rod of 25 mm dia complete.

S&F in repair stainless steel decorative pattern end support suitable for drapery rod of 25 mm dia complete.

S&F in repair 25 mm dia stainless steel drapery rod not less than 1mm thick cut to size and fixed in position, including Standard screw complete all as directed.

S&F in repairs grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F 500 ltrs capacity rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylindrical vertical type with closed top) placing in positionand fixed including dismantling old unserviceable water tank complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylindrical vertical type with closed top) placing in positionand fixed including dismantling old unserviceable water tank complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall or laid in floors complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall or laid in floors complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends, any radius with access door complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) reducer 110mm dia complete all as specified and as directed.

S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed.

M/S MANOJ KUMAR BAL

M/S Surendra Prasad and Associates

MS GIRI AND SONS

M/s Chandan Kumar Thakur

MS HO Shadap

M/S UTTAM SAHA

M/S INSHA ELECTRICALS

M/s A L Traders

M/s Sohini Construction

M/S T N CONSTRUCTION

Bidder Name

M/S Surendra Prasad and Associates