GE (N) P/TOKEN- 24 OF 2025 WELCOME MAINTENANCE AND MISC REPAIR WORK AT GHORPADI OFFRS MD ACCN, JCO/OR MD ACCN, PIONEER UNIT, APS, SCLU, ADV HQ (SWAC), STN CELL, RC ECHS AND OTHER OTM ACCN IN THE AREA OF AGE B/R(EAST) UNDER GE(N) PUNE.-2026

Amount

M&L for preparation of old plastered or unplastered surfaces of wall incl cornices, pillasters by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of OBD complete all as specified and directed.

-Ditto- all as per item No 01 above but applying in two coats of OBD complete all as directed

-Ditto- all as per item No 01, here in before but one coat of OBD on ceiling surfaces

M&L for complete removal of existing treatment on walls, preparation of surfaces and make surface free from loose particles, oil stains etc and surface ideally prewetted and applying white cementitious wall care putty average thickness 1.5mm complete all as specified and directed by Engr-in-charge.

M&L for preparation of old steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enemel paint complete all as specified and directed by Engr-in-Charge

M&L for preparation of old wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enemel paint complete all as specified and directed by Engr-in-Charge

-Ditto- all as per item No 06 above but on ceiling surfaces complete all as specified and directed.

M&L for french polishing on old wooden surface of any description, width or girth including cleaning and preparing the surfaces with a coat of wood filler and applying one or more coats of french polish till the desired finish is obtained complete all as specified and directed by Engr-in-Charge

M&L for prepation of old decorated plastered/unplastered surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and directed.

M&L for prepation of old plastered surface of wall and applying one coat of lustre paint complete all as specified and directed.

M&L for preparation of old wall surface of any description, width or girth, application of resin pigment and hardener to desired colour spfd pattern and applying one coat of acrylic emulsion paint(Apex) with spray guns, compressor etc in any height of Bldg complete all as specified and directed by Engr-in-Charge

-Ditto- all as per item No 11 above but two coat of acrylic emulsion paint complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of wall incl cornices sufaces and applying 8-10 mm thick Level Maxx Plus white cement based self curing mortar (Active bonding polymer) including necessary scaffolding, complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling/ chajja sufaces and applying 3-5 mm thick Level Maxx Plus white cement based self curing mortar (Active bonding polymer) including necessary scaffolding, complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches,pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

M&L for pre-cast cement concrete block masonry with solid blocks exc. 10 cm in width, type C-1,1:3:6 (using 20mm graded agg) and setting in cement mortar 1:6 complete all as directed

M&L for brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius in CM 1:6 complete all as specified and as directed.

M&L for Flush pointing with CM 1:3, to block in course or ashler masonry or concrete block walling to Random rubble masonry, uncoursed or brought upto courses.

Taking down in cement plastering on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc upto any height of Bldg, including necessary scaffolding complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and fair without using extra cement upto any height of Bldg, including necessary scaffolding complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement upto any height of Bldg, including necessary scaffolding complete all as specified and directed.

M&L for preparation of new plastered wall surface of any description, width or girth, and applying one coats of cement base paint over a coat of primer upto any height of Bldg, including necessary scaffolding complete all as specified and directed.

-Ditto- all as per item No 22 above but two coat of cement base paint complete all as specified and directed.

M&L for preparation of new plastered wall surface of any description, width or girth, and applying two coats of OBD over a coat of primer upto any height of Bldg, including necessary scaffolding complete all as specified and directed.

Demolition of cement concrete(un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC type D-2,1:4:8 (using 40mm graded stone agg) as in fdns, sub base of floor, filling and mass concrete complete all as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.09 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified.

M&L coloured vitrified double charge tiles 8-10mm thick (square/rectangular) area of each tile exc 0.18sqm but not exc 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified.

M&L glazed ceramic coloured tiles of size 450 x 300 x 7-8mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 and demolition of existing tiles complete all as specified.

Dismantling of stone slab in any description or thickness, laid bedded jointed in any morter.

M&L Granite (of any type), 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges complete. all as specified.

M&L for machine cut 20-25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing and making good to disturbed surface complete all as specified and directed

S&F for rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made frome virgin grade of polyethy-lene material which is duly stablized with anti-oxident plastic) of capacity 500 litres, cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/ outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank all as specified and directed. Make: Sintex, Polycon, Rotex

-Ditto- all as per item No 34 here in before but 1000Ltrs capacity complete all as specified and directed.

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing GI tubing as specified.

-Ditto- all as per Srl item No 36 here-in-before, but fixing only

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing as specified.

All as per Srl item No 37 here-in-before, but fixing only

M&L cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc 10cm girth all as specified.

S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including long Arm P-trap (CI) 100 mm dia of lenght up to 700 mm or as per site requirement ,complete incl making good to floor all as specified. Make:Cera/Prayag/Johnson Pedder.

Supply and fix in repairs vitreous china wash down floor mounted coupled water closet with PP soft close seat cover, hinges, fixing accessories and accessories set, size 410x720x800mm, S trap 250mm, flushing cistern with cistern fittings complete all as specified and as directed. Make :- Jaquar Cat No. VGS-WHT-81751 S (Bowl) and VGS-WHT-81201 (Cistern) or equivalent of Makes as per Appx A as approved by GE

S&F in repairs vitreous China wash down water closet pan (pedestel pattern) ETWC white, including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour, back closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified. Make : Cera/Prayag/Johnson Pedder.

S&F in repair vitreous china wash hand basin white of bowl size 550 x 440mm incl waste coupling and PVC waste pipe, 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy 15 mm bore to be fixed with and incl M S brackets complete all as specified. Make : Cera/Prayag/Johnson Pedder.

S&F in repair white counter top Basin (self-rimming) Oval shape of size 550mm x 430mm x 195 mm fixed in position including waste coupling and PVC waste pipe, 32mm dia. complete Make: Perryware Model Aquarius, Cat Part No – C0466(SP) or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair plastic closet seat white closed pattern with flat bottom and cover and mild asteel chromium plated hinging device for pedestal pattern WC/semi pedestal and WC (anglo indian type) complete all as specified and directed.

S&F in repair 32mm dia PVC waste pipe for WHB, kitchen sink of length 1.0mtr incl coupling incl fixing the same complete all as specified and directed Make;Prayag or ISI marked

S&F in repair 40mm dia PVC waste pipe for WHB, kitchen sink of length 1.0mtr incl coupling incl fixing the same complete all as specified and directed Make;Prayag or ISI marked

S&F in repairs waste fittings, brass,chromium plated for glazed ware sink/basin etc, size 32mm with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed

S&F in repairs waste fittings, brass,chromium plated for glazed ware sink/basin etc, size 40mm with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F in repair Vitreous china Urinal, Half stall type, white with waste pipe and CP brass spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe including Cp Urinal spreader for fixing with 15 mm dia pipe complete all as specified. Cera/Prayag/Johnson Pedder.

S&F in repair 40mm dia PVC Urinal pipe for Urinal, Half stall type, of length 1.0mtr incl coupling incl fixing the same complete all as specified and directed Make;Prayag or ISI marked

M&L for repair to Aluminium door/windows of any size/any description ,taking off from present position and refixing in the same position after tightening ,easing the section as required, including fitting the rubber packing aluminium snap beading ,re-setting floor/hydraulic spring etc complete all as specified and as directed

S&F in repairs, double action floor spring hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified complete including taking down aluminium door shutter and refixing complete all as specified and as directed

S&F in repair Dead lock, vertical type 4 lever size 65 mm mild steel body with duplicate keys including key hole with fixing bracket complete all as specified and as directed

S&F in repair mild steel body lock, vertical type, for cup board 65mm size Grade-I, 4 levers with duplicate keys including key hole with fixing bracket complete all as specified and as directed

S&F in repair aluminium die cast body Door closer hydraulically regulated designation No 2, universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60kg ISI Marked complete all as specified and as directed

S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified. Make : Cera/Prayag/Johnson Pedder.

S&F in repair PVC connection 15mm bore size with PTMT nuts and washers of length 450mm all as specified. Make : Prayag/Polytuff.

S&F in repair cabinet mirror plastic body for toilet of size 350mmx450mm with 4mm thick looking mirror complete all as specified.Make : Prayag/Polytuff.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, incl 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm, bowl size 405mm x 330mm x 160mm all as specified.

S&F in repair sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, incl 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm, bowl size 405mm x 330mm x 160mm all as specified.

S&F in replacement stainless steel plate rack of size 24''x30"x10" complete all as specified

S&F in replacement stainless steel plate rack of size 24''x36"x10" complete all as specified

S&F in repair of glass shelf of size 450mmx150mmx8mm thick with chomium plated railing fixed with and incl chromium plated bracket complete all as specified.

S&F in repair of corner glass shelf of size 300mm dia and 8mm thick with chomium plated railing fixed with and incl chromium plated bracket complete all as specified.

S&F in repairs hand shower (health faucet) of cast copper alloy chromium plated with 8mm dia, 1.2m long flexible tube and wall hook complete all as specified and directed by Engr-in-charge. Make : Cera/Prayag or of equivalent make as per Appx 'A' as approved by GE

S & F in repair brass chromium plated soap dish , fixed to wall with CP brass screws, all as specified and directed. Make: Johnson Fusion series Cat part No: T3252C or of equivalent make as per Appx 'A' as approved by GE

S & F in repair Brass Chromium plated towel rail all as specified and directed. Make: Johnson Fusion series Cat part No: T1350C or of equivalent make as per Appx 'A' as approved by GE

S&F in repair brass chromium plated towel ring all as specified and directed. Make: Johnson Fusion series Cat part No: T1351C or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs bib cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified. Johnson VIVA new series Cat part No: T4806C or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs bip taps standard of PTMT any colour 15mm bore min wt 90gms Make: Prayag or equvalent of ISI marked

S&F in repairs pillar taps swan neck suitable for 15mm bore pipe long body fancy type brass CP with capstan head screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified. Make : Johnson Magna series Cat part No: T2804C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs pillar taps swan neck (wall mounted) suitable for 15mm bore pipe long body fancy type brass CP with capstan head screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified. Make : Johnson Magna series Cat part No: T2804C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs pillar taps suitable for 15mm bore pipe long body fancy type brass CP with screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified. Make: Johnson VIVA new series Cat Pt No: T4801C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs, chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Cat No. FUS-29037 of make Jaquar ‘Fusion' series or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Jaquar Cat Part No FUS- 29273UPR Fusion Series or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified. Make: Johnson Eco Cat part No: T3910C or of equivalent

S&F in repairs two way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified. Make Johnson VIVA new series Cat part No: T4808C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair cast copper alloy CP shower arm square 230mm long with flange complete all as specified and directed by Engr-in-charge. Make : Johnson Cat part No: S0001C1 or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair brass chromium plated shower rose 115mm size square (without arm) with swivel joints including fixing arm/ pipe all as specified. Make Johnson Cat part No: S0006C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair Toilet paper holder of stainless steel, all as specified and directed. Make: Johnson Fusion series Cat part No: T3254C or equivalent

S&F in replacement 75/100mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate complete all as specified.

S&F in repair grating round 75 mm /100 mm size of CP with/without hole all as specified.

S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified..

S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified..

S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified..

S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified..

S&F in repairs PVC (SWR) bends of any radius of 110mm bore complete all as specified..

S&F in repairs PVC (SWR) bends of any radius of 75mm bore complete all as specified..

S&F in repairs PVC (SWR) branch piece single (single ‘Y’) equal or unequal for 110mm bore PVC pipe complete all as specified..

S&F in repair PVC(SWR) branch piece single (single ‘Y’) equal or unequal for 75mm bore PVC pipe complete all as specified..

S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified..

S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified..

Labour only for opening of air locks in toilets /baths and kitchen water pipe line but excluding fittings complete all as specified.

S&F in repair PVC lid for poly water storage tanks of capacity 500/1000 litres including PVC hinges and PVC locking both complete all as specified.

Cleaning and removing all scale and dirt, etc., from tanks and mouth of circulating pipe etc. including disconnecting existing tanks, setting aside, reconnecting and refixing in position after cleaning exc. 250 & n. exc. 500 litres capacity of tank complete all as specified.

Cleaning and removing all scale and dirt, etc., from tanks and mouth of circulating pipe etc. including disconnecting existing tanks, setting aside, reconnecting and refixing in position after cleaning exc. 500 & n. exc. 1000 litres capacity of tank complete all as specified.

Removing of vegetation / plantation on the wall/ roof/ any position of up to double storey building including necessary scaffolding and roots, girth n. exc. 10cm each and applying chemical treatment with GLYPHOSATE 41% and making good of surface incl removing /refixing of CI/GI pipe lines complete all as specified and as directed. (Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately)

M & L textured heavy duty exterior tiles of size 300mmx300mmx10mm thick ,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed of 15mm thick in CM (1:4) incl demolition of existing tiles complete, all as specified. Make: Johnson Endura textured design or equivalent of Kajaria/Somany).

Taking down chowkats or frames not exc. 1.5 sq. m each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed

All as per srl item No. 102 above but exc. 1.5 sq.m but n exc 4 sqm each complete all as specified and directed

Taking down shutters of any description not exc. 1.5 sq. m each complete all as specified and directed

All as per srl item No. 104 above but exc. 1 sq. m but n exc 2 sqm each complete all as specified and directed

Taking out old rusted/unsv, structural steel work such as steel windows/ventilators and removing same from work site complete including necessary cuttings in brick walls all as directed.

S&F in aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm including 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section complete all as specified and directed by Engr-in-Charge.

S&F in aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Factory made 100 % solid wood plastic composite(WPC) door frame, double rebate 125 mm x 45 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum, complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F factory made solid PVC molded shutter of 28 to 30 mm thick (stiles), consisting of frame made up of MS tube of size 40mm X 20mm (19 gauge) for top, bottom rail, and in stiles rail, with 2, 4, or 6 raised panel design with 5mm thick moulded prelam PVC Sheet on the front face & 5mm thick prelam PVC sheet on back face. Inside core shall be of PVC solid board of 20 mm thick. Door shall be provided with 20 mm thick PVC lipping all around the edges, fixing in frame at site complete all as specified and directed Note : All screws shall be self tapping and length of screw not less than 50 mm.

S&F for 35-40mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed.

Supply and fix second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats.

Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S &F in repair stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples in any height of Bldg complete all as specified & directed.

S&F in repair 3mm thick sheet glass ordinery quality and glazing with oil putty in square n exc. 0.50 Sqm in each pane including hacking out existing broken glass for timber/steel frame work in any height of Bldg complete all as specified.

S&F Stainless steel butt hinges medium weight 100mm all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm

S&F in repair 250mm long anodised aluminum sliding door bolts with hasp and staple(bolt type) and fixing clip sheet cast or extruded sections and fixing bolts and sliding bolts complete all as specified.

S&F 125mm long aluminum anodised barrel tower bolts of extruded section and fixed with door complete all as specifed and directed.

S&F 125mm long aluminum handles, cast type anodised and fixed with door complete all as specifed and directed.

S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

S & F shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

S & F continuous(piano) hinges, stainless steel, width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified & directed.

S & F in repairs Magnetic and connected plate to shutters and frame complete all as specified and directed.

M&L for making hole and fixing the metalic packer for hydrophobic PU foam and sealer without disturbing existing structure as per manufacturer's instructions and forming agent like coreseal 357A/ core seal 357 CAT for carrying out non destructive water proofing treatment of sunken portion slab, floors and walls of bathroom, WC WHB and floor traps (combined unit) by using construction chemical methods such as hydrophobic PU grouting, epoxy coatings etc. including cleaning of surfaces with wire brush, detecting the sources of leakage and reparing, removing/ taking down unsound treatment/ surfaces and followed by material and labour for second course injection of resin like coreseal 135A/ 135B without disturbing existing structure complete all as per manufacturer's instructions and as directed by Engr-in-Charge. Make:Buildcore chemicals/ Pidilite/ Chemistic/ Fosrock as approved.

M&L for cleaning carefully the existing ceramic tiles with tile cleaner with jet, washing with jet water, scratching and cleaning the joint and filling the same with epoxy tile grout of white/ matching colour, curing complete all as specified and as directed. Make: STP, Asian paint, Berger paint, Pidilite, Fosrock

M&L for welding in repairs exc 2.5cm but n.exc 5.0cm in length and thickness of metal to be welded n.exc 6mm complete all as specified and directed.

M&L for welding in repairs exc 2.5cm but n.exc 5.0cm in length and thickness of metal to be welded exc 6mm but n.exc 9mm complete all as specified and directed.

M&L for fixing of snake guard/door seal made aluminum colour coated 40mm wide with nails to cover the gaps between door and floor and similar places complete all as specified

Supply and fixing in repairs 150mm size mild steel, ordinary rat tail rod pattern spring (helical door spring) with roller and roller plates including welding to angle iron plate or chokhats as required and as specified.

S&F in repairs stainless steel peg set of five pegs, fixed/welded/soldered on stainless steel base plate of size 300mmx30mmx2.5 mm and fixed with stainless steel screws, rowel plugs as per the sample approved by the Engineer-in-charge complete all as specified and directed.

Supply and fix repairs decorative type curtain rod , stainless steel, 25 mm dia with not less than 1mm wall thickness complete all as specified and directed.

Supply and fix decorative type brackets , stainless steel U type hook, suitable for above curtain rod complete all as specified and directed.

S &F pull it easy dry clothes pulley system of 6 feet long complete all as specified and as directed.Make Eassy dry system private ltd or of equivalent make as approved by GE

Removing debrises obtained from demolition from various locations (other than this work) to a distance to exc 3 Km abut n.exc 5Km outside MoD land complete all as directed. The location at outside MoD land for disposal of debris material shall be located by the contarctor himself

Dismantling plain or corrugated steel sheeting, any gauge, thickness,including nainital or similar pattern roof coverings

S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

-Ditto- all as per item No 141 here in before but plain sheets on riges,valley gutters and similar works etc complete all as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410-W(Gde-E- 250) quality-A complete all as directed.

M/L for framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framed work of water tanks and similar work complete all as specified and as directed

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer all as specified and as directed.

Dismantling of wall/ceiling board of any description and any thickness including cover fillets etc complete all as specified and as directed.

M&L position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600x600mm, with GI frame work main runner 38 x 24 x 3600mm, cross 'T' 25 x 24 x 60mm/25 x 24 x 1200mm and wall angle 24 x 24 x 2540mm (thickness of the material of 0.30mm ), using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butterfly clips all as specifed and directed by Engineer- in -charge. Make:-Gyproc/Armstrong.

Dismantling asbestos cement (plain, corrugated, semi corrugated etc.) sheets in roof coverings complete all as specified and as directed.

Material and labour for 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof, fixed with L-type or J-type or cranked hook bolts etc. complete all as specified and as directed.

M&L for providing self-adhesive, rubber modified bituminous sealing tape laminated with aluminium foil on upper side, tape width 100mm, and roll length 10m (1 Roll= 10m x 100mm) on cleaned roof /wall surfaces, complete all as specified and directed. Make- Sika,Fosroc, Dr Fixit

M&L for providing epoxy resin non-structural crack sealant, solvent free, 2 component with approx viscosity 90 Mpa-s for waterproofing work in 140 ml packaging on cleaned roof crack or wall crack surface, complete all as specified and directed. Make- Sika,Fosroc,Dr Fixit.

M&L for providing acrylic based, ready to use sealant putty with minimum density of 1.5Kg/L (Cracksil Acrylic paste in 1 Kg Pack) on cleaned surface of roof and wall surface,complete all as specied and directed. Make- Sika,Fosroc,Dr Fixit

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

M/S Sharvi Construction (BID ID -3380199)

AN-ICON Engineering Technologies And Infrastructure Developments Pvt. Ltd (BID ID -3380673)

R k construction (BID ID -3380239)

Gauri Associates (BID ID -3380457)

K.S.JITE AND SONS (BID ID -3380615)

SHRINATH CONSTRUCTION (BID ID -3380611)

THE SAIRAM CONSTRUCTIONS (BID ID -3380329)

L.T Associate (BID ID -3380726)