52/EEC/BSNL/CD/BGL/2025-26

Dismantling ceramic tile flooring laid in cement mortar including stacking material within 50 metres lead.

Ceramic Tiles up to 8mm thick

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Dismantling wash basin of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :

Of area 3 sq. metres and below

Dismantling M.S. grills in windows up to 1.00sqm area by removing screws etc. complete as directed.

Cutting groove in ceramic tile floor/daddo with power cutter machine in a straight line for proper cut after dismantling complete as directed

Providing and fixing round shape wash basin of 470mm dia (ROUND STARLET OF HINDWARE Model No: 10052-SW/CERA-S-2030115 or equivalent) including a pillar cock Clarion model no. CQT-CHR-23011 of Jaquar make CP brass waste coupling

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:

White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing one piece white vitreous china European type water closet (JAQUAR Model-SOLO-SLS-WHT-6851P180PP) of size-360x640x685 mm, P Trap- 180 mm with integral white vitreous china cistern dual flush fitting, of flushing capacity 3/6 litre, including SOFT CLOSE seat cover, and floor fixing screws gasket etc. complete.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Providing & fixing prefabricated mullion member of 300mm long Hot dip Galvanised Square hollow tube-50x50x2.6mm (2-nos) welded with bracket at top & bottom of 100mm long MS flat 50x5mm including fixing to wooden frame with SS screws complete as directed.

Dismantling unserviceable CI pipe & fittings such as traps, bends, Y-junctions etc and CI pipe pieces up to 50cm length exposed for repairs /replacement in sunken portions below W/C, Bath, W/B etc. including cutting of service drain pipe with cutter/saw without disturbing drainage outlets etc. cleaning the site and disposal of material within 50m lead and 25m lift complete as directed.

Repairs to door shutter by edge slicing with carpenter planes/saw/ chiesel/grinder machine etc. wherever required on the thee edges, tightening of loose screws of hinges & lubrication with WD-40 complete as directed (Repaired shutter shall be counted for measurements)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

30 mm thick

P/F PVC fixed louver blades of size-100x6mm in windows frames with SS screws complete as directed

Removing Old MS/Aluminium door fittings like handles, aldrops & tower bolts of a dismantled door and refixing the same to a new shutters in true alignment with door frames etc. with stainless steel screws complete as directed by E-I-C. (number of fittings shall be paid)

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete .

Supplying & fixing 304 Stainless Steel 25 mm dia. SS pipe curtain rod of in proper line & level in a required length including cutting & fixing in position with necessary support brackets/end knobs of matching diameter wherever required complete as directed by Engineer-in-charge (Note Only decorative knobs/ pipe connectors shall be paid for separately)

Supplying & fixing Stainless Steel decorative knobs/ Connectors 25 mm dia. for curtain rod including fixing in position as directed by Engineer-in-charge

25mm dia. Decoratibve knobs of approved design

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Semi rigid pipe -32 mm dia

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

15 mm nominal bore

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.

15 mm nominal bore with 45 cm length

Providing and fixing C.P. brass 2-Way bib cock with Wall Flange for European commode of approved quality and brand (HINDWARE-F740004CP or equivalent)

Providing and fixing on wall face Health Faucet of ABS Body including 1.20 Meter Long PVC flexible pipe & Wall Hook (ESSCO or equivalent)

Providing and fixing Stainless steel grating of approved quality and colour.

100 mm nominal dia. circular type

Providing and fixing on wall face unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type-B, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion

100 mm dia pipe

75 to 80 mm dia pipe

Providing and fixing rigid SWR UPVC fittings for PVC pipes of approved quality as directed by Engineer-in-charge.

PVC reducer collar 90-110mm

Renewing glass panes and refixing existing wooden fillets:

Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm).

Providing and fixing 120GSM fibre glass mosquito mesh of approved make (SAINT GOBAIN/LIFECRAFT or equivalent) with velcro tape stitched on all borders and fixing to the existing window frame with adhesive complete as directed by Engineer-in-Charge

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc. complete.

Replacement of fabric & foam of sofa/ chairs removing old worn out fabric, foam/coir cushion, pluk out nails etc. renewing with new 32-density PU foam base top covered with 400GSM Polyester fabric (VELVET /texture finish) stitched to maintain existing shape & size of cushion in backrest & seat portion

Three seater wooden sofa with three cushion seats & removable fabric cover with zip chain.

One seater wooden sofa with one cushion seats & removable fabric cover with zip chain.

Providing and fixing BWR plywood conforming to IS:303 (ARCHID/GREENPLY/CENTURY or equivalent make) over wooden bed frame including cutting to required size & applying a coat of wood primer on all the faces complete as directed for all lead & lift.

12mm BWR plywood

Repairs to the Aluminium shutter & frame, removing shutter/hinges as required restoration of style & rail joints in proper alignments removing warping in members, cleat angle tightening, restoring vertical alignment of door frame removing gap between jambs if any replacing screws wherever required including replacing damaged member (it shall be paid separately or made available by the department free of cost) complete as directed by Engineer in charge. (For shutter area up to 2.50sqm)

Providing and fixing expansion hold fasteners on C.C. /R.C.C. /Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.

Wedge expansion type -Fastener with threaded dia 6 mm

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

With stainless steel cover plate minimum 1.25 mm thickness.

Credit to the agency for material recovered by dismantling under relevant items of this agreement

GI/MS/CI Pipes

PVC flushing cisterns