31/2025-26/

Amount

Safe loading Carriage including unloading and proper stacking of following materials from central store Barabanki / JE Store to site of work.

STP Pole 11 Mtr long

PCC Pole 8.5 Mtr long

Top Channel

T-off Channel

S/S Base Angle

11kv Disc Insulator with fitting

11kv Pin Insulator with pin

Stay Set Complete

ACSR Weasal Conductor

F-Bracket

11kv X-ARM

Earthing Rod with 6swg earthing wire

Gaurding Channel

Transformer 25 KVA

Transformer 100 KVA

GI Wire for Gaurding

LT ABC Cable (3x95+1x70+1x16) SQ. MM.

LT ABC Cable (3x50+1x35+1x16) SQ. MM.

LT ABC Cable (1x16+1x25) SQ. MM.

1 Phase Distribution Box

3 Phase Distribution Box

Dropper Channel

Dragging of pole from JE Dump Store to site

Grouting of PCC/STP Pole

Concreting of Stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, and stay insulate etc.

Stringing and sagging of 11 KV line with ACSR Weasal Conductor including nuzzling binding and jumpering (weasal conductor will be provided by the department)

Installation of Mounting of Following capacity of Transformer including its connection between 11 KV and LT Line mounting provinding Crimping type Aluminium lugs of required size.( All the material except transformer will be arranged by the contractor)

Mounting of 25 KVA Tranformer

Mounting of 100 KVA Tranformer

Errection of Substation type double pole with PCC /STP 8.5/11/13 Pole Mtr. Long . including mounting of Top Channal Dropper Channel, base angle with clamps with nut & bolt, fitting of 33/11 KV pin & Pin insulator.

Errection of single PCC /ST Pole for Stringing, jumpharing and sagging of conductor 1/6 of total length of poles

Stringing and Sagging of LT (3x95+1x70+1x16) ABC Cable (LT ABC Cable will be provided by the department)

Stringing and Sagging of LT (3x50+1x35+1x16) ABC Cable (LT ABC Cable will be provided by the department)

Stringing and Sagging of LT (1x16+1x25) ABC Cable (LT ABC Cable will be provided by the department)

Installation of 1 Phase Distribution Box

Installation of 3 Phase Distribution Box

Earthing of pole with MS Earthing.

Provinding & Fixing of various type materials. All materials shall be supplied by the contractor.

Nut & Bolt

LT Clamp

LT Shackle Insulator

11kv X-arm holding clamp

Looping and Choopping of tree branches in laying on the route of line.

Concreating and pilinthing of ST& PCC Pole 18x24 CM.

Construction of masonry type transformer plinth of sutable size 1.5×1.5×1.5 M with brick, cement, Coarse sand, sand & brick ballast, filling of sand in the hollow space, plastering outer surface in ratio 1:4:6 top of the plinth 4” thickness grouting of 2 nos. MS Channel of size 100×50×200 mm on the top of the plinth for placement of transformer. (All the material will be arranged by the contractor)

Construction of retaining wall, fabrication & erection of Wire Mesh fencing of suitable size as per physical condition.. (All the material will be arranged by the contractor at his own cost).

Installation of LT Feeder pillar missionary type complete with 3 nos outgoing circuit, DO Fuse Set 11 KV, aluminium lug 400 sq mm, L Piece for 250/400 KVA T/F.

Earthing of T/F Pipe type with 40 fit deep borring and providing GI Pipe 1.5" dia (60 fit GI Pipe) and GI strip 25x5 mmx6 meter long attached with clamps, L piece, nut & bolts and GI Pipe Cap. All material shall be supplied by the contractor.

Dismentaling of Old Pole/Line/TF

M/S SWASTIC CONTRUCTION (BID ID -5285358)

POOJA ENTERPRISES (BID ID -5285435)