Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.7 LAccepted-AOC 1 181 KAMATCHI AMMAN KOVIL STREET KANNAN COLONY CHINTHAMANI MADURAI 625009 | MADURAI | MADURAI | TAMIL NADU | 625009 | L1 | Accepted-AOC BEING LOWEST ACCEPTED | |
| 2 | L2₹37.5 L+₹1.8 L (5.06%)Rejected-Finance 10 67 1 CHINNAMUSHIDIWADA PENDURTHI VISAKHAPATNAM ANDHRA PRADESH 530051 | VISAKHAPATNAM | VISAKHAPATNAM | ANDHRA PRADESH | 530051 | L2 | Rejected-Finance L1 BEING ACCEPTED | |
| 3 | L3₹39.0 L+₹3.2 L (9.03%)Rejected-Finance NO 12 25 26 KATHIRAVAN NAGAR MAHALINGAPURAM PO POLLACHI COIMBATORE 642 002 | COIMBATORE | TAMIL NADU | 642002 | L3 | Rejected-Finance L1 BEING ACCEPTED | |
| 4 | L4₹39.1 L+₹3.4 L (9.43%)Rejected-Finance | L4 | Rejected-Finance L1 BEING ACCEPTED |
Tender Value
₹39.2 L
EMD Value
₹78,400
Closing Date
11 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (I)(CG) Chennai
Garrison Engineer (I)(CG) Military Engineer services Second Floor CG DHQ No 5(TN) No 4 and 4 A Clive Battery complex Rajaji Salai Chennai 600001
PROVISION/RENOVATION OF AREA DRAINAGE AND PATH AT ICGS MANDAPAM UNDER GE(I) CG CHENNAI
2023_MES_581202_1
8012/E8
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer (I)(CG) Chennai
All as per tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer (I)(CG) Chennai
₹78,400
Yes
22 Mar 2023
20 Feb 2023
14 Mar 2023
20 Feb 2023
11 Mar 2023
27 Feb 2023
Amount
Demolition of brick work or stone masonry built in cement mortar including all quions,arches,pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and rubbish off the premises to a distance not exc 100m and depositing where directed and serviceable items taken as credit complete all as specified and as directed
Demolition of unreinforced cement concrete in ground floor and pavings n.exc. 15 cm thick (below or above GL) complete all as specified and directed by Engineer in Charge
Excavating in trenches not exceeding 1.5 M wide and not exc 1.5 metre deep and getting out in soft/loose soil complete all as specified and as directed
Returning, filling in soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specifed and as directed.
Removing excavated material exceeding 50 meter but not excedding 250 m depositing where directed at a level not exceeding 1.5m above the starting point complete all as specifed and as directed.
Material and labour for cement concrete type C2, 1:3:6 using 40mm graded aggregate as in foundations, filling and mass concrete including necessary form work complete all as specified and as directed.
Material and labour for Brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.
Material and labour for providing cement concrete type B1 1:2:4 using 20 mm graded aggregate as in coping, bed plates, plinth courses , parapet and like including wethering slightly rounded or chamfered angles and thoarting including necessary form work complete all as specified and as directed.
Material and labour Plain cement concrete 1:3:6, type C2 using 40 mm graded stone aggregate as in surface channels and drain complete all as specified and as directed.
Material and labour for Extra for formin fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mi-tred /stopped ends etc all as specified and as directed.
Material and labour for Extra for formin fair finished drain or channel 45 cm inner girth in cement concrete using extra cement including forms, moulds, mi-tred /stopped ends etc all as specified and as directed.
M&L external rendering 15mm thick in cement mortar (1:4) on other than fair faces of brick wall or concrete surfaces, finished fair and even complete all as specified.
Material and labour for Providing precast cement concrete type B1 1:2:4 using 20 mm graded aggregate set in cement mortar 1:4 as in landing, cover slab(for drains etc) shelves and similar articles with plain faces including necessary form work complete all as specified and as directed.
Material and labour for corrosion resistant TMT bars of grade Fe-500/500D of10mm dia bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Material and labour for corrosion resistant TMT bars of grade Fe-500/500D of 6 to 8 mm dia bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Material and labour fot Reinforced cement concrete Class NP 3 pipes ISI Marked ,200 mm bore with one collar per length of pipe complete all as specified and as directed.
Material and labour for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in concrete bed to drain pipes of 200 mm dia bore including packing under and haunching against the side of pipes after they are laid and tested complete all as specified and as directed.
Cutting into existing manholes for connecting new drains, making good to pipe of 150/200 mm dia and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed.
Surface excavation not exceeding 30 cm deep and averging 15 cm deep and getting out in Hard/Dense complete all as specified and as directed.
Material and labour for Hard core of gauge n exc 63 mm graded crushed stone aggregate deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and as directed
M&L for brick work with sub class ‘B’ old size fly ash bricks straight or curved on plan to any radius as in half brick thick wall built in CM 1:4 complete all as specified and directed.
Material and labour for Plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete including necessary formwork complete all as specified and as directed.
Material and labour for Plain Cement concrete 1:4:8 type D-2 of thickness 75mm(using 40 mm graded stone aggregate) as in sub base of flooring/hard standing including necessary form workcomplete all as specified and as directed.
M&L for 75mm thick Plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in sub base of floorsing/hard standing, pathway finishing the surface even and fair complete all as specified and directed
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed
Material and labour for chequered cement concrete tiles 30cm x30cmx25mm thick ,ISI Marked , hydraulically machine pressed set, jointed and pointed in neat cement slurry with grey and cement pigment in floors over a screen bed of 15 mm thick in cement mortar 1:4 over complete all as specified and as directed.
M&L for rendering 10mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified.
Providing and laying precast cement concrete type B1 (1:2:4) using 20mm grdaded stone aggregate as in kerb stone complete all as specified and as directed
Supply and fix PVC (SWR) pipes of dia 75mm single socketed in any length with rubber ring joints, laid in trenches or in floors/fixed in walls complete all as specified and as directed.Make: Finolex/Tru bore
SIVA MARUTHI ENTERPRISES
Rajapriyaconstruction
A N KUMAR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .