E-tender/Eng/EQ-318/24-25

Amount

Distribution wiring in 2x22/0.3(1.5sq.mm) single core stranded FR PVC insulated & unsheathed copper wire in 20mm size PVC rigid conduit FR with 1x22/0.3(1.5sq mm) single core stranded "FR" PVC insulated…………..Modular type switch fixed on MOD GI switch board ....2no suitable size ph& N...original finish a) Ave run...8mtr.

b) Ave run 9mtr

S&F 240V ,16A 3pin mod type plug socket with 16A mod type switch without plug top on 4 mod GI mod type switch board…..continuity wire etc

S&F 240V , 3nos16A 3pin mod type plug socket with 3nos 16A mod type switch 20A mod switch type SP MCB & indicator without plug top on 2row 12 mod GI mod type switch board…..continuity wire etc

S&F240V 4nos 6A 3pin mod type plug socket with 4nos6A mod type switch,16A mod switch type MCB…2row 18 mod top cover…..continuity wire etc

Disrtibution wiring in 1.1KV single core stranded FR PVC insulated & unsheathed copper wire in 20mm size PVC rigid conduit FR…as required a)2x22/0.3(1.5sq.mm)+ 1x22/0.3(1.5sq.mm) ECC

2x56/0.3(4sq.mm)+1x36/0.3(2.5sq.mm)ECC

d)2x84/0.3(6sq.mm)+1x56/0.3(4sqmm) ECC

Supplying of luminaires which are as follows A)TMC 501 P 2xT-LED incl.mounting rail for TLED lamps (Philips/Havells/C&G)

B)TMC 501 P 1xT-LED incl.mounting rail for TLED lamps….(Make..Do)

C)TLED Essential tube 1200mm..1600 Lumen 20w(Philips)

Fixing only single/Twin flurescent light fitting suspended 25cm below the ceiling with 2no 20mm dia EI conduit supports fixed with "L" type MS clamp whose one side fixed on ceiling….1.10mtr length

S and fixing 240V 25A modular type socket,25A modu-lar type starter,25A modular switch type DP MCB ,6 m-odule GI switch board,cpver plate,..making necy,co-nnection with copper wirw ,earth continuity wire.…..

D)Supply & fixing of ceiling fan 1200 mm(48") IS 374:2019 withBLDCmotor,minimum air delivery 210m3/min 3star BEE rating with service value >4.1 to<5.1, orient quasar, CG aqua prime,havells or equivalent any ISI make

S&F D/D horizontal TPN MCB DB with IP42/43…with neutral link & provision for earthing attachment 8way,Legrand,Schneider,L& T

S&F D/D horizontal SPN MCB DB with IP42/43…with neutral link & provision for earthing attachment 2+12way,Legrand,Schneider,L& T

S & F240/ 415V MCB isolator on DIN rail of existing DBs & necy connection 100A FP,Legrand,Schneider,L&T

S & F240/ 415V MCB isolator on DIN rail of existing DBs & necy connection 63A DP,Legrand,Schneider,L&T

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection SP 6-32Amps Legrand

Lowering the existing ceiling fan incl blade etc with necy disconnection of power supply

Dismantling of existing electrical installation ( ceiling fan.tube lights,conduit,SFU,fuse DB etc rate as per WB Govt.Labour rate)

S & F socket type fan regulator (step type) on existing sheet metal switch board with…..by cutting bacelite top cover incl making necy connection etc

Fixing only single /Twin fluorescent light fitting complete with all accessories directly on wall… suitable size fastner..as required

supplying& Laying of cable as below on existing cable tray & binding with suitable GI wire of PVc Arm.cable with AL.conductors 1.1 kv grade conforms to IS:1554(part 1)for following cross section a) 1x35sq.mm 3.5C

b) 1x 16sq.mm 2C

S& F compression type gland with brass gland,brass ring,rubber ring for dust & moisture proof entry & Finishing the end of following cables by crimping method incl S & F sockets (Dowells make) ..as below a) 1x35sq.mm 3.5C

c) 1x 16sq.mm 2C

S&F of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling not more than 17.5% suspended from ceiling incl.S &F GI connector,6mm dia MS suspenders,bolts& nuts,steel fastner etc…..MS support.300x50x1.25mm(18SWG)

S& F of perforated GI cable tray bend with perforation not more than 17.5% suspended from ceiling with two nos suspenders……MS supports.300x50x1.25mm(18SWG)

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection FP 63Amps Legrand

connecting the equipment to earth busbar incl S& F GI wire of size as below on wall staples inside wall as reqd & making connection with equipments with nut bolts etc & mending good damages. 10SWG

S & F earth busbar of galvanized MS flat of 25x6 mm on wall having clearence of 6mm incl providing of drilled holes…….as required

KUNDU ELECTRICALS (BID ID -5796748)

G. P. ENGINEERING (BID ID -5792215)