Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹4.8 L
EMD Value
₹9,520
Closing Date
7 Dec 2022, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer S and D Division Ist
Suliman Complex Dalgate Srinagar
Stage contract for Repairs Replacements and Maintenance of mechanical Equipments installed within Eight 08 numbers Intermediate Pumping Stations around Dal Periphery, 02 Nos. feeding pump stations of STP and 17.08 MLD Sewage Treatment Plant Brari Num
2022_HAUDD_197716_2
short term e-NIT No.38 of 2022-23
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
120 days
STP Brari-Numbal
as per NIT
2 documents required · 2 mandatory
₹500
Executive Engineer S and D Division Ist
₹9,520
8 Dec 2022
28 Nov 2022
8 Dec 2022
28 Nov 2022
7 Dec 2022
28 Nov 2022
Amount
Overhauling of Sewage Submersible Pumping Units of make Kirloskar/ Flowmore/ KSB/ Darling/ Xylem as and when required during contract period including to and fro carriage of units between site and workshop, disassembling of units at site, providing and fitting of mechanical seals and reinstallation after overhauling of pumps at site with defect liability period of six months. The old damaged bearings are to be returned to Sub-divisional store against proper receipt. The discharge capacity of the pumps to be overhauled are
2-cusec sewage submersible pumps with 20 Hp Prime mover
3-cusec sewage submersible pumps with 30 Hp Prime mover
0.45- cusec sewage submersible pumps with 5 Hp Prime mover
14 LPS sewage submersible pumps with 3 Hp Prime mover
5-cusec sewage submersible pumps with 75 Hp Prime mover
5-cusec sewage submersible pumps with 50 Hp Prime mover
10-cusec sewage submersible pumps with 100 Hp Prime mover
Overhauling of Horizontal shaft disposition sewage Pumping Units by way of providing and fitting of sleeves and stuffing boxes as per sample, oil seals, gland packing, remetalling, turning, finishing at worn-out locations, providing and filling of lubricants including disassembling of pumping units, to and fro carriage of units between site and workshop, reinstallation and testing but excluding P/F of new bearings. The overhauling unit shall have defect liability period of six months. The old damaged bearings are to be returned to Sub-divisional store against proper receipt. The details of the pumping units to be overhauled is listed below as and when required during contract period:
10-cusec pumping units
7-cusec pumping units
5-cusec pumping units
3-cusec pumping units
2-cusec pumping units
1-cusec pumping units
SP2L/ SP3L pumping units
Repairs to 3-phase voltage stabilizers as and when required during contract period by way of providing and fitting of new copper coils after dismantling damaged copper coils, replacement of bush rods, terminals, replacement of voltage regulator plates including to and fro carriage of units between site and workshop, disassembling, reinstallation and testing. The damaged copper coils are to be retained by contractor and the rate quoted should be inclusive of rebate on this account. The repaired voltage stabilizers shall have defect liability period of 06 months. The ratings of the voltage stabilizers to be repaired are:
Servicing of 3 phase DG Sets of KOEL/ Cummins/ Cotton Greaves make by way of providing and filling of Engine Oil, providing/ fitting of oil filters, fuel filters, air filter, disposing off the old M. Oil, cleaning of DG Sets and testing after servicing of the DG Sets. The ratings of the DG Sets to be serviced are:
250 KVA DG Set
160 KVA DG Set
140 KVA DG Set
125 KVA DG Set
82.5 KVA DG Set
50 KVA DG Set
Providing of mild steel black tubes/ pipes for sewage lines as and when required during contract period confirming to IS-1239 (part-I) 224 and IS: 3589: 2001 (Grade FE 440 and FE 450). The details of the required piping is given here under:
5.4 mm, 125 mmф
5.4 mm, 150 mmф
6.3 mm, 200 mmф
6.3 mm, 250 mmф
7.1 mm, 300 mmф
8.0 mm, 350 mmф
8.8 mm, 400 mmф
Providing of Galvanized tubes/ pipes for sewage lines as and when required during contract period confirming to IS-1239 (part-I) 224 and IS: 3589: 2001(Grade FE 330, FE 440 and FE 450). The details of the required piping is given here under:
2.6 mm, 15 mmф
3.6 mm, 50 mmф
3.6 mm, 65 mmф
4.0 mm, 80 mmф
4.5 mm, 100 mmф
Providing of MS flanges as and when required during contract period confirming to IS: 6392-1971 for suction and delivery conductors of pumping units as per the specifications given here under:
15 mm N.D (G.I), OD-80 mm, PCD-55 and number of holes 4
20 mm N.D (G.I), OD-90 mm, PCD-65 and number of holes 4
25 mm N.D (G.I), OD-100 mm, PCD-75 and number of holes 4
35 mm N.D (G.I), OD-120 mm, PCD-90 and number of holes 4
40 mm N.D (G.I), OD-130 mm, PCD-100 and number of holes 4
50 mm N.D (G.I), OD-140 mm, PCD-110 and number of holes 4
65 mm N.D (G.I), OD-160 mm, PCD-130 and number of holes 4
80 mm N.D (G.I), OD-190 mm, PCD-150 and number of holes 4
100 mm N.D (G.I), OD-210 mm, PCD-170 and number of holes 4
125 mm N.D (Mild Steel), OD-240 mm, PCD-200 and no. of holes 8
150 mm N.D (Mild Steel), OD-265 mm, PCD-225 and no. of holes 8
200 mm N.D (Mild Steel), OD-320 mm, PCD-280 and no. of holes 8
250 mm N.D (Mild Steel), OD-375 mm, PCD-335 and no. of holes 12
300 mm N.D (Mild Steel), OD-440 mm, PCD-395 and no. of holes 12
350 mm N.D (Mild Steel), OD-490 mm, PCD-445 and no. of holes 12
400 mm N.D (Mild Steel), OD-490 mm, PCD-445 and no. of holes 12
Providing and fitting of tyre couplings of specifications given below:
TC-17 (OD-280 mm)
TC-16 (OD-270 mm)
TC-14 (OD-225 mm)
TC-15 (OD-255 mm)
TC-12 (OD-140 mm)
TC-11 (OD-115 mm)
Supply of structural steel material for repairing of sump covering, pipe supports, cable tray supports, base frames etc as per the details given hereunder (as and when required during contract period):
ISMC (100 x 50)
ISMC (125 x 65)
ISMC (150 x 75)
ISMB (100 x 75)
ISMB (125 x 75)
ISMB (150 x 80)
ISMB (200 x 100)
ISA (25 x 25 x 3)
ISA (40 x 40 x 5)
ISA (50 x 50 x 6)
ISA (65 x 65 x 5)
ISA (75 x 75 x 6)
MS Chequerred Plate 8 mm thick
MS Chequerred Plate 10 mm thick
MS Plate 6 mm thick
MS Plate 8 mm thick
MS Plate 10 mm thick
MS Plate 12 mm thick
Providing and fitting of MS nuts and bolts of assorted sizes with washers(as and when required during contract period).
Providing and fitting of chain pulley blocks over gantry beam (as and when required during contract period) through skilled manpower using safe tools and tackles at various installation sites. The chain pulley blocks shall be of makes Indeff/ Pull Lift/ Globe and meet IS standards with test certificates.
01-ton capacity chain pulley block with lift of 3-meters, maximum hook suspension 500 mm, no. of falls 02, maximum weight 20 kgs, 7-meter additional load chain specifications (Min. 5mm, Gr 80 or above)
02-ton capacity chain pulley block with lift of 3-meters, maximum hook suspension 600mm, no. of falls 01, maximum weight 30 kgs, 7-meter additional load chain specifications (Min. 6mm, Gr 80 or above)
03-ton capacity chain pulley block with lift of 3-meters, maximum hook suspension 750 mm, no. of falls 02, maximum weight 35 kgs, 7-meter additional load chain specifications (Min. 8mm, Gr 80 or above)
05-ton capacity chain pulley block with lift of 3-meters, maximum hook suspension 900 mm, no. of falls 02, maximum weight 65 kgs, 7-meter additional load chain specifications (Min. 8mm, Gr 80 or above)
Providing of services of highly skilled welder along with welding machine and gas cutter, gas cylinders for undertaking various repair jobs at pump stations and STP (as and when required during contract period).
Supply of adore make electrodes for undertaking various welding jobs at pump stations and STP(as and when required during contract period).
Providing and filling of recommended lubricant (Gear oil) ISo VG 320 for speed reduction gear boxes of surface aerators over aeration tanks. Anyone of the following lubricant brands and their grades is to be provided and filled. Carbol 320 or Amocan 320 (BPCL), Alpha ZN 320 (Castrol), Harmony 320 (Gulf), Enclo 320 (HPCL), ServoMesh SP 320 or Servosystem 320 (IOCL), Avalon 320 (Veedol) (as and when required during contract period).
Providing and filling of lubricant oil Servosystem-57 (IOCL), Enclo 53 (HPCL) for lubrication of bearings of pumping units. The oil should be of highly refined mineral product of high emulsibility free from running and acid forming tendencies (as and when required during contract period).
Providing and applying of grease for bearings of pumping units installed within various pump stations and STP. The grades of the grease to be provided and applied is SERVO GEM-3 (I.O.C.L) or NATR or Lithon-3 (HPCL) (as and when required during contract period).
Providing and fitting of flanged cast iron sluice valves with bolted bonnet, inside screw, non-rising stem and hand wheel operated having PN rating of 1.0 and confirming to IS; 14846 as per the details given hereunder. The sluice valves are to be fitted after removing old damaged sluice valves from piping mains. Make: Kirloskar/ Kartar/ Zoloto/ Sir (as and when required during contract period).
Providing and fitting of flanged cast iron sluice valves with bolted bonnet, inside screw, non-rising stem and hand wheel operated having PN rating of 1.0 and confirming to IS; 14846 as per the details given hereunder. The sluice valves are to be fitted after removing old damaged sluice valves from piping mains. Make: Kirloskar/ Kartar/ Zoloto/ Sir (as and when required during contract period).
Providing of labour with requisite tools for bush cutting within the premises of 17.08 MLD STP around aeration tanks, pump houses, aerobic digester, sludge concentrator, sludge thickener and DG Set room through manual means (as and when required during contract period).
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular suctions/ appropriate -- sections and other sections of approved make confirming to IS: 733 and IS: 1285, fixing with desh fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc., aluminum sections shall be smooth, rust free, straight, metered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/ paneling, CP brass/ SS screws, door handles of approved make, providing/ fixing hinges/pivots and making provision for fixing of fittings wherever required.
Providing and fixing glazing in aluminum door, windows, ventilator shutters and partitions etc with EPDM rubber/ neoprene gasket etc. complete as per directions of engineer in charge with float glass of 5 mm thickness (as and when required during contract period).
Providing and fixing of CGI Sheets for repairs to DG Set sheds after removing of old damaged CGI Sheets to protect the DG Sets from getting damaged.
Supply of asbestos lubricated and graphite gland packing for horizontal shaft disposition pumping units as per the details given below (as and when required during contract period):
5 mm thick
8 mm thick
10 mm thick
12 mm thick
19 mm thick
Providing of rubber insulation cloth (RI cloth) for horizontal shaft disposition pumping units (as and when required during contract period).
Supply of V-belt for connecting speed reduction gear boxes with their prime movers of size as given below (as and when required during contract period):
Providing of coolant/ anti-freezing oil for DG Sets installed within pumping stations and STP.
Providing and fitting of weight washers for foot valves of 5-cusec and 10-cusec discharge capacity horizontal shaft disposition pumping units at pumping stations and STP (as and when required during contract period).
Fabrication and providing of weight plates for foot valves of 5-cusec and 10-cusec discharge capacity horizontal shaft disposition pumping units at pumping stations and STP (as and when required during contract period).
Fabrication of check nuts for 5-cusec and 10-cusec discharge capacity horizontal shaft disposition pumping units at pump stations and STP (as and when required during contract period).
Providing and fitting of monorails for 01 ton, 02 ton, 03 ton and 5 ton chain pulley blocks at pumping stations and STP (as and when required during contract period).
Supply of V-belt for connecting speed reduction gear boxes with their prime movers of size as given below (as and when required during contract period):
6.3 mm thick for 1 ton/ 2 ton Chain pulley block
10 mm thick for 3ton/ 5ton Chain pulley block
Providing of Services of highly skilled Diesel mechanic for Servicing of DG Sets.
Supply of Log Book for recording daily running of Electromechanical Equipments containing of 100 pages for each log book installed with in various pumping Stations including 17.08 MLD STP.
Providing and fitting of Rubber Mats of Size 6”x240” to scraper carriage assemblies of Aeration Tanks 1st and 2nd of 17.08 MLD STP Brarinambal.
M/s Shaheen Enterprises
stage.html
html • 0.02 MB
finance_526366.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .