Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.0 LAccepted-AOC GROUND FLOOR JN ROAD HADDO SOUTH ANDAMAN ANDAMAN NICOBAR 744102 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744102 | L1 | Accepted-AOC L1 Bidder | |
| 2 | L2₹49.6 L+₹4.7 L (10.3%)Rejected-AOC 302 4TH FLOOR SAI NILAYAM APARTMENT BESIDES JAGAN S COLLEGE GOMATHY NAGAR MAGUNTA LAYOUT NELLORE ANDHRA PRADESH 524003 | SPSR NELLORE | ANDHRA PRADESH | 524003 | L2 | Rejected-AOC Not L1 | |
| 3 | L3₹55 L+₹10.0 L (22.3%)Rejected-AOC 521 LOHA BHAVAN P D MELLO ROAD MASJID EAST MUMBAI MAHARASHTRA 400009 UDYAM MH 19 0131433 21ABHCS9995D1ZZ B 27ABHCS9995D1ZN R M 37ABHCS9995D1ZM B MII STATUS AS VERIFIED | MUMBAI | MAHARASHTRA | 400009 | L3 | Rejected-AOC Not L1 | |
| 4 | L4₹60.9 L+₹16.0 L (35.5%)Rejected-AOC D 12 3 TTC INDUSTRIAL AREA MIDC TURBHE NAVI MUMBAI NAVI MUMBAI NAVI MUMBAI MAHARASHTRA 400705 | THANE | MAHARASHTRA | 400705 | L4 | Rejected-AOC Not L1 | |
| 5 | Rejected-Technical OFFICE NO 09 FIRST FLOOR HANSRAJ DAMODAR TRUST BUILDING GOA STREET FORT MUMBAI MAHARASHTRA 400001 | MUMBAI | MAHARASHTRA | 400001 | - | Rejected-Technical Not Qualified |
Tender Value
₹50.2 L
EMD Value
₹1.0 L
Closing Date
18 Apr 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
A C Sahoo,DC,PPA
A C Sahoo,DC,PPA
DRY DOCKING REPAIRS OF PILOT LAUNCH BIJU PATTNAIK OF PARADIP PORT AUTHORITY AT PARADIP
2023_MoS_746666_1
MD/ACCTS/WK-R-1/2023/398
Open Tender
Marine Works
Works
Paradip
Refer Tender Document and e-TCN
4 documents required · 4 mandatory
₹5,900
Yes
As per Tender Document and e-TCN
₹1.0 L
Yes
19 Oct 2023
24 Mar 2023
19 Apr 2023
24 Mar 2023
18 Apr 2023
24 Mar 2023
Amount
General Services & Docking (DECK SIDE DEFECT)
To quote for duration of stay at Slipway to complete all the works related to dry dock as per defect list.
To quote for duration of stay at Lay up Berth to complete all the works related to Lay Up Berth as per defect list.
Scrapping, cleaning and grit blasting of entire hull and plating up to main deck to make bare surface. (standard of SA 2.5, copper grit blasting)
Painting of under water portion of the hull with 6coats of Epoxy Paint by airless spray (2Coats primmer+2coats sealer+2 coats Anti fouling/Finish)
Painting of above water portion (ship sides, deck, superstructure with 6coats of Epoxy Paint by airless spray (2Coats primmer+2coats sealer+2 coats finish paint)
Scrapping & power cleaning only of Chain Locker, Fore peak and void spaces including frames, angles and bulkheads. To paint above area with 4 coats of Epoxy Paint by airless spray ( 2 Coats primmer+ 2 coats Finish)
Anchors along with the chain to be lowered, cleaned, Grit blasted and painted with 2 coats of epoxy primer & 2 coats of finish paints. Joining shackles & ‘D Shackles to be opened, freed, marked and painted. Anchor chain to be changed as per PPT/IRS requirement during inspection. Bitter end connecting to be checked and if necessary strengthened. Two no of anchor as per specification to be supplied as directed by authority along with Test & Manufacturer's Certificate
Packing for all the weather deck doors and hatch cover for E/R room and other spaces are to be changed including renewal of channels to make it water tight. Width= 20 mm , 25 mm & 40 mm. To quote including cost of materials.
Gauging to be done by certified IRS firm for minimum 300 points along with report submission.
To overhaul the chain locker hand pump ( including spares and other materials)
Port & Starboard Wheel House FRP Doors handle to be renewed with SS solid handle. Door to be made water tight with renewal of rubber packing hollow type (40 mm). Inner face of the door to be fitted with Marine grade 19mm ply & sunmica ( kitply,greenply make) To quote L.S including cost of materials.
To repair the pilot seat rexine cover, (including cost of materials and seat covers)
Cost for Steel Renewal Steel Platings along with frames, beams, brackets and all the required fittings shall be renewed at following locations as per the normal practice of ship construction / IRS Construction Rules: (a) Hull Platings (Under Water & Above Water) (b) Main Deck Platings (c) Under Deck Bulk Heads (d) Sea Chest Platings (e) Skeg, Bilge Keel and Rudder (f) Fender Holding Plates (g) Any other steel structure as required by PPT (h) Engine room floor plates securing angles , stair case ,man hole covers. Firm to Quote above steel renewal including cost of Steel Plates per Ton Basis. M.S. Plates (Marine Grade, Shell steel only) of 12MM/10MM/8 MM thickness will be used for renewal of platings. The M.S. Plates are to be of approved type for Ship Construction ( No.IS 2062). All supporting documents of Shell steel to be submitted in Original. IACS approved welding rod to be used. Before commencement any plate renewal. certificate from manufacture to be submitted and a physical inspection of to be carried out jointly.
To remove the ‘D’ type Rubber Fenders from in and around the Ship side, crop the top & bottom holding plates including the stiffeners. To weld new plates of 10 mm thick X 100 mm width including the triangular stiffeners at a gap of 10MM x 1 Mtr. and fit back new / old fenders in place with new SS nuts & bolts (20 mm dia X 200 mm). To quote the cost of removal & fixing of fenders including Nuts & Bolts excluding cost of Rubber Fenders & Steel Renewal.
Supply of EPDM material D-Type solid (no hallow at center) fenders of 150mm x 150 mm x 2 meter. The Original Test certificates (as per ISI standard) from the original manufacturer to be furnished.
Pilot board on monkey island to be renewed
Pipe line of SINTEX Overhead Tank on monkey island leaking, to be repaired. If needed to be replaced with new pipe lines.
Cracks in Korean board on Bulk Head in Pilot Cabin to be repaired. Edges of Center table in Pilot Cabin are broken at various places. Same to be repaired / renewed. Table Top Surface to be re-polished.
Letherite cover of chairs in wheel house damaged. Same to be renewed.
Over hauling of anchor winch to be carried out and proper function will be inspected for full satisfaction of PPA. To quote L.S including cost of materials.
Deck landing wood to be replaced with new seasoned teak core wood of same dimention and specification, non-core wood will be rejected. Wood will be rejected if any deviation on wood quality( Size- width-6", thickness-2") Firm to quote with materials and fittings.
Toilet flush along with fittings to be repaired. Firm to quote L/S with all spares.
Removal of old Anodes. To supply and fitting of new Zinc Anodes fitted with MS welding arm (5.5 Kgs each) approx. with quality test certificates. Make- SARGAM
To quote for supply of following paints from OEM or its Authorized Dealers of Jotun/Orange/Sigma.
Epoxy Primer
Epoxy Anti Corrosive
Sealer
Epoxy Anti Fouling
Top Coat Green
Top Coat White
Top Coat Grey
Epoxy Thinner
Anti Fouling Thinner
Engine side Defects
To remove, clean & Paint the sea chest along with gratings. Sea chest area to be grit blasted & Painted with 6 coats of epoxy paint. To quote including cost of materials. Paint PPA Supply.
To quote for scrapping, power cleaning of bilges: Engine room bilges, steering compartment bilges including frames, angles, bulkheads and foundation of main engines, generators and all other equipment. All the surfaces are to be made rust free & oil free . After inspection byEngineer-in-charge, paint to be applied. To paint above area with 4coats of Epoxy Paint by airless spray (1Coat primmer+ 2 coats sealer + 1 coat Finish). Paint PPA Supply.
To remove, dismantle, and overhaul the following overboard, sea chest & intermediate valves of sea water pipeline. After overhauling, all the valves shall be pressure tested at 5 Kg/ sq.cm and shown to the Engineer-in-charge and fit back with new gasket, stainless steel nuts & bolts, joints and the supporting clamps. To quote Including cost of materials.
1) Gate Valve – 125NB
2) SDNR Valve - 125NB
3) Gate valve - 65NB
4) SDNR Valve – 65NB
5) Globe Valve- 80NB
6) SDNR Valve – 65NB
7) Globe Valve – 50
8) Globe Valve – 25
Following pipe lines in engine room, deck, are to be removed, renewed with schedule 40 seamless pipes with old flanges. All the pipe line are to be welded along with flanges from both sides. The pipelines are to be painted inside & outside and fitted back with new joints, stainless steel nuts & bolts and supporting U- clamp whereever required. To quote Including cost of materials.
1)15mm bore
2) 25mm bore
3) 40mm bore
4) 50MM bore
5) 65MM bore
6) 75 MM bore
7) 100 mm bore
8) 200 mm bore
The flange of Exhaust overboard pipe ( 8 inch) to be removed and new flange 16mm thick with 8nos, 16mm size stainless steel studs are to be fitted with external stiffner. Only after flange fitted on Exhaust pipe, then only flange to be welded with stern plate under the guidance and supervision of Engineer-in-charge.
The Hydraulic hoses for schottel steering unit clutch unit, DG set fuel supply are to be renewed as per samples. ( Make: Gates, Parker, Eaton, goodyear) Approximate pipe sizes are as follows
1) Schottel Hydraulic Hose (5/8 inch) Length-1200m.
2) Schottel Hydraulic Hose (5/16 Inch) Length- 450mm.
3) Engine Clutch Box Hose (5/16 Inch) Length- 470mm .
4) Power Pack box Hose (3/8 Inch) Length- 850mm.
5) Power pack box hose (1/2 Inch) Length- 1mtr.
6) power pack box hose (1/2 Inch) Length- 600mm.
7) Power pack box hose (1/2 Inch) Length- 500mm.
8) Power pack box hose (5/16 Inch) Length- 1 mtr.
9) Power pack box hose (3/8 Inch) Length- 1mtr.
10) Power pack box hose (5/8 Inch) Length- 1mtr.
11) Hydraulic hose (1/2 Inch) Length- 570mm.
12) Hydraulic hose (3/8 Inch) Length- 500mm.
To quote for supply of 24 inches wiper blades.
To quote for supply and fitting of 100W LED flood light in water tight casing, IP 66 grade (Make:- Havells, Bajaj, CG, Philips)
Exhaust pipe (02 Inch dia) of DG exhaust to be insulated with HR lagging and GI sheet cover (approx. length 2meters) including renewal of SS exhaust bellow. To quote including cost of materials.
Man hole covers for the Diesel tanks (E/R) to be opened, tanks to be cleaned properly. After inspection and survey, all the man hole covers are to be fitted back with new gaskets of 4mm thick and studs if requred. Covers are to be made watertight. Deisel tank size as follows:
i) 1000mm X 1400mm X 900 mm
ii) 950mm X 950mm X 900mm
DG set Diesel tank Gauge glass cocks are to be removed, overhauled & fitted back with proper sealant, new O-rings & gaskets/ glands, new glass if required. To quote including cost of materials.
Engine room blower air intake manifold to be removed & air inlet to be grit blasted and painted with 04 coats of Epoxy paint, (paint PPA supply). Fit back with new SS hinges, sealing rubber packing, stainless steel wing nut and bolts.To quote including cost of materials.
Alternator overhauling with new bearing, revarnishing 12.5kva, 440v, 60Hz. Insulation to be improved to 50Mohm. Quote L.S.
To quote for supply of following items:
i) Self starter for Main Engine, Make-Delco Remy, series: 42MT, Type: 400 volt, 24V DC
ii) Alternator 24V, 55amps (TVS) SA28-55A-24V
iii) Alternator 12V, 35amps (TVs)
iv) RPM indicator digital meter 118 teeth, 24V with SPEED PICKUP unit (Make:Twintech)
To supply of motor of rating 2.2 kW, 3HP, 415V, 4Pole/ 1500 rpm, DOL foot Mounted, 3-Phase, TEFC cast Iron Induction motor (Make: Kirloskar, ABB, Siemens, CG)
MCB 6amps, 3 pole, Make: (ABB/ Schneider/ legrand)
Breaker 63 amp, 4 pole, Make: (ABB/ Schneider/ legrand)
63 amps, 04 pole rotary switch
MCB 63 amp, 4 pole Make: (ABB/ Shneider/legrand)
To quote for supply and installation of following items
To quote for supply and commissioning of electrichorn/ siren with audibility range of 3 Knots, 230 V AC(Kheeraj make)
To quote for supply and fitting of watertight LED deck light fittings 10W (Make: Havells, Bajaj, Philips, CG)
To quote for supply and installation of 30W LED flood light fitting Type: IP66 in Engine room and steering room with necessary modification (Make: Havells, Bajaj, Philips, CG )
To quote for supply and installation of wall mounting 12 inch fan in wheel house and Pilot cabin. Make: Havells/ bajaj/ Cinni/ Usha/ Almonard
To supply and fit DG set SW water supply pump with pulley, Capacity: 5m3/hr, 10 meter head, Marine type with Mechanical seal and pump casing to be brass lined.
N.B.: BoQ Sl.No.2.00 & 3.00 shall be considered for tender evaluation purpose only. BoQ Sl.No.1.00 Slipway Charges shall be directly paid by PPA to Slipway Operator M/s.Sadhav Offshore Engineering Pvt. Ltd. and Lay up Berth shall remain with PPA.ed.
Harkamal Maritime Industries Private Limited
Sadhav Offshore Engineering Pvt. Ltd.
Brilliant Seagull Pvt. Ltd
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .