REPAIR AND MAINT TO INTERNAL ELECTRIFICATION WORK, GEYSER, CEILING FANS, ETC IN CERTAIN BLDGS AT HQ 10 SECTOR RR AND 29 RR BN UNDER AGE (I) CIF (K).

Amount

Taking down carefully copper/aluminium point wiring (light, fan, light & power socket) complete with fittings and fixtures such as switches,ceiling rose ,pendents ,regulators,socket,lamp holders brackets,bulk head fitting, etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and also making good distrubed surfaces of wall,floors etc, complete all as specified and directed by the Engineer-in-Charge.

Point wiring with 1.5 sqmm copper conductor (Multistranded) PVC insulated and unsheatheted FRLS electric cable 1100 volts grade and including PVC casing caping/conduit pipe of suitable size with all fittings accessories and including PVC insulated electric cable 1100 volts, 1.5 sqmm (multi stranded) copper conductor single core (Green colour) cable as continious earth wire connected to common earth dolly including sunk sheet terminal box made out of 1.6 mm thick MS sheet concealed on wall or on surface as per site requirement and making good distrubed surface of wall ,covered with 3 mm thick plastic laminated for mounting of switches, socket, fan regulators etc., complete all as specified and directed by the Engineer-in-Charge for the following:-

One light /fan/bell point controlled by one No, one way 5 Amps switch. complete all as specified and as directed by the Engineer-in-Charge.

One light point controlled by two Nos ,2 way 5 Amps switchs, complete all as specified and as directed by the Engineer-in-Charge.

One 3/5 pin socket outlet, 5 Amp, independent, controlled by one No. one way switch on independent board, complete all as specified and as directed by the Engineer-in-Charge.

One 3/5 pin socket outlet, 5 Amp controlled by one No, one way switch on same board, complete all as specified and as directed by Engineer-in-Charge.

One bell/buzzer point controlled by one bell switch 5 Amp, complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 2 here-in-before ,but for one socket out let 15 Amp on the independent board with 2.5 sqmm copper conductor multistranded PVC insulated and unsheathed electric cable 1100 volts (ISI MARKED) including PVC insulated and unsheathed electric cable 1100 volts, 2.5 sqmm copper stranded conductor as continious earth wire connected to common earth dolly, complete all as specified and as directed by the Engineer-in-Charge.

Replacement of existing Sheet metal enclosure DB with new Sheet metal enclosure factory made (double door) shutter type for MCB DB SPN, 240 Volts, 12 ways with 200 Amps rated bus bar, neutral link, earth bar, complete all as specified and as directed by the Engineer-in-Charge.

Replacement of existing Sheet metal enclosure DB with new Sheet metal enclosure factory made (double door) shutter type for MCB DB SPN, 240 Volts, 8 ways with 200 Amps rated bus bar, neutral link, earth bar, complete all as specified and as directed by the Engineer-in-Charge.

Replacement of existing Sheet metal enclosure DB with new Sheet metal enclosure factory made (double door) shutter type for MCB DB SPN, 240 Volts, 4 ways with 200 Amps rated bus bar, neutral link, earth bar, complete all as specified and as directed by Engineer-in-Charge.

Replacement of existing Sheet metal enclosure DB with new Sheet metal enclosure factory made shutter type for MCB DB SPN, 240 Volts, 2 ways with 200 Amps rated bus bar, neutral link, earth bar, complete all as specified and as directed by the Engineer-in-Charge.

MCB SPN, 40-63 Amps, 230 volts, 10 kA rupturing capacity, 'C' curve type, including taking down old existing, complete all as specified and as directed by the Engineer-in-Charge.

MCB SP, 5 -32 Amps, 230 volts, 10 kA rupturing capacity, 'C' curve type, including taking down old existing, complete all as specified and as directed by the Engineer-in-Charge.

Piano type switch one way, SP, flush type, 5 Amps, 230 volts AC, 50 Hz, complete all as specified and as directed by the Engineer-in-Charge.

Piano type switch two way, SP, flush type, 5 Amps, 230 volts AC, 50 Hz, complete all as specified and as directed by the Engineer-in-Charge.

Piano type socket outlet, flush type, 2 in 1, 3 pin, 5 Amps, 230 volts AC, 50 Hz, complete all as specified and as directed by the Engineer-in-Charge.

Piano type switch socket combination, flush type, 5 in 1, 15 Amps, 230 volts AC, 50 Hz, multipurpose type, complete all as specified and as directed by the Engineer-in-Charge.

Piano type bell push switch, one way, SP, flush type, 5 Amps, 230 volts AC, 50 Hz, complete all as specified and as directed by the Engineer-in-Charge.

Call Bell ding dong AC,230 Volt single Pole Complete, complete all as specified and as directed by the Engineer-in-Charge.

Ceiling rose surface type, 65 mm x 50 mm three terminals/PVC/polycarbonate, isolated body fixed on PVC block,complete all as specified and as directed by the Engineer-in-Charge.

Electronic fan regulator flush mounting step type 300-400 Watts, complete all as specified and as directed by the Engineer-in-Charge.

42 Watt LED Light fitting 2ft x 2ft recess mounting ceiling light fitting flush to ceiling Aura I pairs super bright LED's with highly efficient light-smoothing optics to deliver superior illumination and energy savings year after year with LED tube light and making of electrical connection with and including three core flexible copper conductor cable of suitable size, including taking down existing old unserviceable, complete all as specified and as directed by the Engineer-in-Charge. Make : Havells Cat part No VENUSNEOHE2X2PLR18-42WLED830MOD or equivalent in /Bajaj/Philips/Wipro

LED Tube Light 20 watt LUMILINE Basic all purpose surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver. and making of electrical connection with and including three core flexible copper conductor cable of suitable size, including taking down existing old unserviceable, complete all as specified and as directed by the Engineer-in-Charge. Make: Havells Cat Part No- LUMILINEBS20WLED865SPCWH or equivalent in Bajaj/Crompton Greaves /Phillips/Wipro

Replacement of existing Lamp holder with new Lamp holder PVC polycarbonate type with back plate and providing LED 9 Watt lamp , complete all as specified and as directed by the Engineer-in-Charge. Make:- Bajaj/Havells/Philips.

Edgepro round slim-fit low profile downlights are engineered to deliver superior light output and uniformity utilising the latest edge-lit LED technology.An ideal solution where ceiling voids are limited but high lumen output 25 Watt LED and making of electrical connection with and including three core flexible copper conductor cable of suitable size, including taking down existing old unserviceable, complete all as specified and as directed by the Engineer-in-Charge. Make :- Havells Cat No- EDGEPRORDDLR25WLED857S or equivalent in Bajaj/Crompton Greaves/Phillips

Edgepro square slim-fit low profile downlights are engineered to deliver superior light output and uniformity utilising the latest edge-lit LED technology.An ideal solution where ceiling voids are limited but high lumen output 25 Watt LED and making of electrical connection with and including three core flexible copper conductor cable of suitable size, including taking down existing old unserviceable, complete all as specified and as directed by the Engineer-in-Charge. Make :- Havells Cat No- EDGEPROSQDLR25WLED857S or equivalent in Bajaj/Crompton Greaves/Phillips

Replacement of existing busbar chamber with new busbar chamber 4 pole 440 volt, 63 Amp rating capacity in metalic body weather proof, rust proof, dust proof, complete all as specified and directed by the Engineer-in-Charge. Make:- Havells cat part No IHBCOO6304 or equivalent in L&T/Bajaj/Schneider/Hensel.

Replacement of existing MCCB with new MCCB 4 pole 440 volt 125 Amp rating capacity in 36 KA, complete all as specified and directed by the Engineer-in-Charge. Make:- Havells/L&T/Legrand/ABB /Schneider

Replacement of existing MCCB with new MCCB 4 pole 440 volt 160 Amp rating capacity in 36 KA, complete all as specified and directed by the Engineer-in-Charge. Make:- Havells/L&T/Legrand/ABB /Schneider

Replacement of submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 6 sqmm complete drawn in and including casing caping/PVC conduit ISI marked of suitable size and its accessories along with 1x 6 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface, complete all as specified and directed by the Engineer- in-Charge. Note :- 2 +1 run of 6Sqmm cable including casing caping/PVC conduit of suitable size shall be measured as one running metre.

Earthing complete with and including galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick surrounded by a mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less than 2.25 m deep below ground level with top edge of earth plate at a depth of not less than 1.5 m below ground level, connected with and including galvanised iron or steel earth wire,4mm dia (No. 8 SWG) by means bolts, nuts, check nuts and washers made out of galvanised iron, 15 mm bore (light grade) GI pipe for protection of earthing lead, 20 mm bore (light grade) GI pipe for watering with funnel, wire mesh and including necessary excavation and earth work, PCC 1:2:4 type B-1 pit and 50 mm thick RCC M-25(Design mix) reinforced with XPM (weight not less than 3 kg/sq m) pit cover, C.I frame, charcoal and comman salt filling in alternate layers, complete all as shown and specified in electrical plate No. 3 of SSR Part-I (2009), complete all as specified and directed by the Engineer-in-Charge. Note:- Earthing to be done for replacement of existing earthing. The materials retrieved from earthing shall be credited to contractor.

Supplying, laying, jointing and testing 1100 volts grade PVC insulated heavy duty armoured multistranded aluminium conductor,served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire,one twin core cable flat or circular 6sqmm 2 core, complete all as specified and directed by the Engineer-in-Charge.

Supplying, laying, jointing and testing 1100 volts grade PVC insulated heavy duty armoured multistranded aluminium conductor,served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular 10sqmm 2 core, complete all as specified and directed by the Engineer-in-Charge.

Material and Labour for servicing and repair/replacement of defective parts of ceiling fan of 1200/1400 mm, Exhaust fan upto 300 mm sweep and wall fan of any type/capacity including greasing, oiling for smooth working , complete all as specified and as directed by the Engineer-in-Charge. Note :- Defective part will be measured and paid seperately under appropriate item of this BOQ.

Material and Labour for replacement of defective copper winding of ceiling fan of size 1200/1400 mm, Exhaust fan upto 300 mm sweep and wall fan of any type/capacity with existing size of super enamelled copper wire including varnishing and heating for smooth working complete with testing for 24 hours, complete all as specified and as directed by the Engineer-in-Charge.

Supply and replacement Fan Condenser 2.5/4.0 MFD , complete all as specified and as directed by the Engineer-in-Charge.

Supply and replacement Ball Bearing of any type and size, complete all as specified and as directed by the Engineer-in-Charge.

Supply and replacement of fan hook clamp with split pin of existing size, complete all as specified and directed by the Engineer-in-Charge.

Material and Labour for repair of Geyser of capacity 25/50 litres including disconnecting of all electric/water line connection from existing point and taking out for repairs at site workshop, replacement of defective parts of geyser and testing after completion of repair to satisfication of Engineer-in-Charge and refixing/remounting on wall of geyser with S&F new 4 x fastener, nuts, bolts and washer of suitable size, complete all as specified and as directed by Engineer-in-Charge. Note :- Defective parts will be measured and paid seperately under appropriate item of this BOQ.

Supply and replacement of Heating Element of any type/size suitable for geyser of any capacity, of 1500 watt/2000 watt, complete all as specified and as directed by Engineer-in-Charge.

Supply and replacement of Geyser assembly of any type and size suitable for 25/50 litres capacity, complete all as specified and as directed by Engineer-in-Charge.

Supply and replacement of thermostate of geyser of any type and size suitable for 25/50 litres capacity, complete all as specified as directed by the Engineer-in-Charge.

Supply and replacement of MS heat resistant heavy duty inner tank of geyser of capacity 25/50 litres, complete all as specified and directed by Engineer-in-Charge.

Supply and replacement of lead wool for geyser of 25/50 litres capacity, complete all as specified as directed by the Engineer-in-Charge.

Note :- An amount of Rs. 9,700.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S A Q ENTERPRISES

M/s FAYAZ AHMAD BHAT C/O ZAHOOR AHMAD DAR