PROVN OF 400 MTR BLACK TOP ROAD AT 2(I) PARA FD WKSP COY UNDER GE (WEST) AGRA

Amount

Surface excavation n. exc. 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil including cutting to required gradient and camber as per formation of raod forms complete all as specified and directed .

Removal of surplus soil to a distance not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

Rolling and consolidation formation surface of road with 8 to 12 tonne power road roller including filling in depression which occur during the process of rolling of formation to required level, gradient camber and super elevation including necessary watering & filling complete all as specified and directed.

M&L for soiling(or sub base) of granite, trap or basalt stone 150 mm thick (spread thickness) with broken boulders or quarred stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber with 8 to 10 tonne power road roller complete all as specified and directed.

M&L for 15 cm thick (compacted thickness two layers 7.5 cm thick each layer) WBM with coarse aggregate of grading 2 (40 mm to 63 mm) or grading 3 (50 to 20 mm size) aggregate (granite, trap or basalt) spread rolled and consolidated required gradient and camber with 8 to 10 tonne power road roller complete all as specified and directed.

M&L for preparing of unsurfaced WBM surface of with wire brushes for removing caked mud etc and sweeping with brooms and finally fanning to clear the surfaces with gunny bags to remove all loose dirt etc complete all as specified and directed.

M&L for applying by providing evenly a priming / tack coat with bitumenous primer (Paving bitumen VG-10) @ 10 Kg / 10 Sqm with paving bitumen with sprayer complete all as specified and directed.

M&L bitumenous premix asphaltic sem-dense concrete 40 mm consolidated thickness using with 5.5 % binder content by weight of total mix, rolled and compacted to required camber and gradient with paving bitumen VG-30 with mechanical paver, mixed at hot mix plant rolled to uniform smooth surface well rammed, rolled with 8 to 10 ton power rollers to required camber and gradient with mechanical paver complete all as specified and directed.

M&L for continuous brick edging (with width equal to width of bricks) of whole burnt bricks and laid dry on end verticaly including embedding in ground tamping around bricks and removing surplus soil to a distance n. exc. 50 mtr and deposited where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

C P Singh and Co

Attar Singh and Sons