Supply, Installation and Commissioning of Furniture and Furnishing works at International Craft Complex at plot No. 8 Vasant Kunj New Delhi.

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the

Construction of International Craft Complex at Plot No. 8 Nelson Mandela Marg New Delhi.

S.No. Item Description Amount Remarks

Total Amount 3,52,00,826.38

Total Amount 3,52,00,826.38

Digitally signed by

Signature of Contractor

DEVENDRA DEVENDRANBCC SINGH

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Supplying and placing in position of Sofa upholstered with fire retardant fabric as per

image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint.

and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top

of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick

and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat

1 arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achive

desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

a 3-Seater Sofa: 1850 (w)x800(D)x750(h) NOS. RATE ONLY 42,087.00 0.00

b 2-Seater Sofa: 1350 (w)x800(D)x750(h) NOS. RATE ONLY 30,210.00 0.00

Supplying and placing in position of Sofa upholstered with fire retardant fabric as per

image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint.

and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top

of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick

and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat

arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Supplying and placing in position of Center Table of size 1125x600x425Ht

Table top and one side support made out of 18mm thk BWR plywood with 4mm thk

natural walnut natural walnut veneer. Top of the table to be finished finished with 4mm

natural walnut veneer and all two drawer with sliding with channel and internal finish .8

laminated as per approved with edge covered PCV machine position biding including

diffused joints. Front edge of table top to have complete as per image. and leg made

3 NOS. RATE ONLY 29,749.00

in teak wood 45x45 mm torning design with 45x30 mm teak wooden frame work

All Visible natural walnut veneer/Wood surfaces to finished with P.U. polish matte finish

(2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired shade

WAITING LOBBY and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Supplying and placing in position of center Table of size. 1200x600x450 mm with

Structure made out of teak wood turning design shaped leg member of size 80x80 mm

and 4 connecting Teak wood member of size 70x28 mm with top wooden frame of size

80x28 mm with 12 mm thick smok glass . All visible edge to be covered with teak wood

binding 25x18 mm including hand carving work etc. all complete.

All Visible Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1

coat of PU polish and rubbing complete to achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Supplying and placing in position of corner Table of size 600x600x500 mm Ht

Table top and one side support made out of 18mm thk BWR plywood with 4mm thk

natural walnut natural walnut veneer. Top of the table to be finished finished with 4mm

natural walnut veneer edge covered teak wood round shape binding including diffused

joints. Front edge of table top to have complete as per image. and leg made 18mm thk

5 BWR plywood with 4mm thk natural walnut natural walnut veneer NOS. RATE ONLY 10,476.00

All Visible natural walnut veneer/Wood surfaces to finished with P.U. polish matte finish

(2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired shade

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Supplying and placing in position of side of size 450 mm dia 450 mm ht. Table with

Structure made out of teak wood tarning round one pilar shaped leg member of size

90x90 mm and 4 connecting Teak wood member of size 70x70 mm with round shape

shelf in 18mm BWR ply finished with 4mm teak natural walnut veneer. Table top made

with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total

thickness to 36 mm with 4 mm thick METALLO MAPPA bural veneer. All visible edge to

be covered with 2nd Class teak wood/ natural woodened paper veneer lipping etc. all

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

Table top to be finish with high gloss polyester 8 coat or more complete to achieve

desired shade and finish.

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Supplying and placing in position of Single Bed ( with out BOX TYPE) (Without

Mattress)as per photograph. Bed Size - W1800 x D900 x H800(bed ht. 400)mm made

out with 18 mm BWR ply with out side 4mm thk natural walnut including all edge

covered with teak wood lipping and corner joint with 50x50x mm teak wood corner

round shape. Including 2 class hard wood support 4 nos. member size 70x30 mm.

skirting 50 mm height made with 18 mm PLY with 4 mm thick veneer and 12 mm ply on

7 bed top. Head board made out of size 800x 900 mm with 18 mm BWR ply including 36 NOS. 6 27,426.00 1,64,556.00

All Visible natural walnut veneer/Wood surfaces to finished with P.U. polish matte finish

(2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired shade

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Supplying and placing in position of Double bed .2050(D)x1850(W)x300(H)

Bed Structure made out with 18 mm BWR ply and complete Teak Wood with Hand

Crafted carving works as per the Image. Head board made out of size1200 x 1850 mm

in Teak wood with Handcrafted Carving works and Inserts of upholstered panel having

30 mm thick, 32 density foam covered with fabric of approved shade and design

8 including cutting design. and 4 poster wood member size 70x70x 1800 ht NOS. RATE ONLY 1,41,827.00

All Visible natural walnut veneer/Wood surfaces to finished with P.U. polish matte finish

(2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired shade

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Supplying and placing in position of Single Bed ( with out BOX TYPE) (Without

Mattress)as per photograph. Bed Size - W1800 x D900 x H800(bed ht. 400)mm made

out with 18 mm BWR ply with out side 4mm thk natural walnut including all edge

covered with teak wood lipping and corner joint with 50x50x mm teak wood corner

round shape. Including 2 class hard wood support 4 nos. member size 70x30 mm.

skirting 50 mm height made with 18 mm PLY with 4 mm thick veneer and 12 mm ply on

9 bed top. Head board made out of size 800x 900 mm with 18 mm BWR ply including NOS. 1 59,095.00 59,095.00

upholstered panel having 30 mm thick, 32 density foam covered with fabric of

approved shade and design finished with P.U. polish matte finish (2 coat of sealer, 1

coat of PU polish and rubbing complete to achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Supplying and placing in position of of bed side table. Size 500x425x450mm bed side

table structure made out with 18 mm BWR ply with 4mm thk natural walnut on visible

face and 0.8mm thick laminate on all internal usable side. All visible edge to be

covered with 2nd class teak wood lipping, back side covered with 6 mm ply. one fix

(false) drawer in bottom and one openable drawer in top made with 12 mm BWR ply

10 with telescopic channel. Drawer front made 4mm thick 18 mm ply etc. all complete. NOS. RATE ONLY 9,801.00

All Visible natural walnut veneer/Wood surfaces to finished with P.U. polish matte finish

(2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired shade

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Supplying and placing in position of bed side Table with Structure made out of teak

wood turning design shaped leg member of size 40x40 mm and 4 connecting Teak

wood member of size 25x25 mm with rectangular shape shelf in 18mm BWR ply

finished with 4mm burl natural walnut veneer. Table top made with 18 mm BWR ply

and 6 mm wide border in 18 mm BWR ply to increase total thickness to 28 mm with 4

mm thick bural veneer. All visible edge to be covered with 2nd Class teak wood lipping

and one providing of drawer with slling channel and internal finish .8 mm laminated

11 edge covered with PVC bidding etc. all complete. NOS. 6 28,331.00 1,69,986.00

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

Table top to be finish with high gloss polyester 8 coat or more complete to achieve

desired shade and finish.

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Supplying and placing in position of Sofa upholstered with fire retardant fabric as per

image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint.

and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top

of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick

and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat

arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

a Single Seater Sofa: 800 (w)x800(D)x800(h) NOS. RATE ONLY 21,280.00

b Two Seater Sofa: 1300 (w)x800(D)x800(h) NOS. RATE ONLY 34,534.00

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Supplying and placing in position of Premium Single Seater Sofa upholstered with fire

retardant fabric as per image. Hidden Sofa frame work made in seasoned SYP pine

wood with mortise joint and Exposed frame made in teak wood with Die-Cast Bronze

inserts in Back, hand rest, arm, legs and frames as per the Image. framework finished

by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core

PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness

13 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort

as required on seat, arms & back.

All Visible natural walnut veneer/Wood surfaces to finished with P.U. polish matte finish

(2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired shade

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

a Single Seater Sofa: 800 (w)x800(D)x800(h) NOS. 1 34,592.00 34,592.00

b Two Seater Sofa: 1300 (w)x800(D)x800(h) NOS. 1 69,184.00 69,184.00

Supplying and placing in position of side Table of size 900 diax 450 mm with Structure

made out of teak wood leg member of size 70x30 mm and 4 connecting Teak wood

member of size 70x30 mm with . Table top made with 18 mm BWR ply and 50 mm

wide border in 18 mm BWR ply to increase total thickness to 36 mm with 4 mm thick

METALLO MAPPA bural veneer. All visible edge to be covered with 2nd Class teak

wood/ natural woodend paper veneer lipping etc. all complete.

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

14 polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to NOS. RATE ONLY 28,331.00

achieve desired shade and finish).

Table top to be finish with high gloss polyester 8 coat or more complete to achieve

desired shade and finish.

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Guest Room / Bed

Supplying and placing in position of side of size 900 mm dia 450 mm ht. Table with

Structure made out of teak wood tarning round one pilar shaped leg member of size

150x150 mm and 4 connecting Teak wood member of size 70x70 mm with round

shape shelf in 18mm BWR ply finished with 4mm teak natural walnut veneer. Table top

made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total

thickness to 36 mm with 4 mm thick METALLO MAPPA bural veneer. All visible edge to

be covered with 2nd Class teak wood/ natural woodend paper veneer lipping etc. all

Discussion Table With 2 no's Chair

Providing and supplying The back & Seat of the chair is upholstered with Fabric. cut

foam on 12mm thick BWP Plywood. The chair shall have deep cushioned in seat

16 comfort to body contours for proper alignment, posture and all day comfort. Chair NOS. 1 57,423.00 57,423.00

Frame Made of wooden Frame duly polished. Table top & frame Made of wooden

Frame duly polished. Table size 450mm dia x 450mm ht

Discussion Table With 2 no's Chair

Providing and supplying The back & Seat of the chair is upholstered with Fabric. cut

foam on 12mm thick BWP Plywood. The chair shall have deep cushioned in seat

17 comfort to body contours for proper alignment, posture and all day comfort. Chair NOS. RATE ONLY 35,514.00

Frame Made of wooden Frame duly polished. Table top & frame Made of wooden

Frame duly polished with cushion.

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Providing & Fixing Wardrobe as per photograph. Wardrobe Top, Carcass & shutter and

shelf are made of 18mm thick BWR ply. Openable shutter with piano hinges of full

length as per ht of shutter. 4 INCHES BROAD HANDLE SS Finish. Wardrobe shall

have two drawers internal and outer finished with .8 mm laminate the wardrobe with

recessed handle, opening of drawers shall be very smooth. There shall be a Drawer for

18 shoes in the bottom of the wardrobe. Shoe Rack Inner Space Should be clear 5 inch

minimum with Handle of 4". Wardrobe Back made up of 9 mm BWR ply . 3" Tower Bolt

of ALUMINIUM. 8 mm Dia SS Finish HANGING for hanging clothes. All exposed edges

sealed with 2mm thick PVC edge band of matching colour . All hardware is of Ebco

make. etc. all complete.

Providing & Fixing Luggage rack Table as per photograph. Table of size:-1200(w) x

600(d) x 600(ht). The top shall be made out of 25 mm thick BWR ply with both side .8

mm laminate of approved shade, design and colour. All exposed edges are sealed with

2mm thick pvc edge banding tape pressed at 200 degree C with hot melt glue on

19 special machines. The Gable end shall be made out of 25 mm thick BWR ply. The NOS. 2 17,469.00 34,938.00

Modesty shall be made out of 18 mm thick 18 mm ply

.Table top having ss 6x6 mm soled square bar stoppers.etc all complete

Providing & Fixing Study Table as per photograph. The top shall be made out of 25

mm thick BWR ply with both side .8 mm laminate of approved shade, design and

colour. All exposed edges are sealed with 2mm thick pvc edge banding tape pressed at

200 degree C with hot melt glue on special machines. The Gable end shall be made

out of 18 mm thick BWR ply. The Modesty shall be made out of 18 mm thick BWR ply

20 of 600mm Ht. The Table is having one pencil drawer made of 18mm ply. Pencil Drawer

shall have extended facia for opening the drawer (without handle design) with lock.

Pencil Drawer size: 350(w) x 450 (d) x 150(ht).All hardware is of Ebco make.

a Size:-1200(w) x 600(d) x 750(ht). NOS. RATE ONLY 19,798.00

b Size:-1700(w) x 600(d) x 750(ht). NOS. RATE ONLY 30,280.00

Supplying and placing in position of Study Table of size. 1200x600x750 mm with

Structure made out of teak wood turning design shaped leg member of size 60x60 mm

and 3 connecting Teak wood member of size 45x30 mm with top wooden moulding

30x18 BWR ply 18 mm thick ply with bural veneer . All visible edge to be covered with

teak wood biding 25x18 mm including hand work including 2 drawer with 18 mm BWR

21 ply with .8 mm laminate including all edge covered PVC biding etc. all complete. NOS. 1 37,475.00 37,475.00

All Visible Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1

coat of PU polish and rubbing complete to achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Supplying and placing in position of Study Table of size. 1200x600x750 mm with

Structure made out of teak wood turning design shaped leg member of size 60x60 mm

and 3 connecting Teak wood member of size 45x30 mm with top wooden moulding

30x18 BWR ply 18 mm thick ply with bural veneer . All visible edge to be covered with

teak wood biding 25x18 mm including hand work including 2 drawer with 18 mm BWR

22 ply with .8 mm laminate including all edge covered PVC biding etc. all complete. NOS. 1 40,357.00 40,357.00

All Visible Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1

coat of PU polish and rubbing complete to achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Supplying and placing in position of chair for Study Table.

chair Seat frame of size: Frame made out of 70x 30mm 2nd Class Teak wood frame

along with soft foam for a comfortable seat. The seat cushion is made of 75mm foam

of density 32-35kg/ m3 fixed over 12mm BWR ply finished with fire retardant fabric of

approved shade.

Chair back frame and Hand rest: frame and hand rest shall be made out of 40x40mm

2nd Class Teak wood frame along with soft foam for a comfortable back. The back

cushion is made of 25mm foam of density 32-35kg/ m3 fixed over 12mm BWR ply

23 finished with fire retardant fabric (both front and back) of approved shade . The chair NOS. 2 23,638.00 47,276.00

having legs of size 40mm x 40mm thk at upper side and 25mm x 20mm thk at

bottom side are made out of 2nd Class teak wood.

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Providing and placing in position T.V Unit of standard size :-1200(L)x400(D) x 600

(ht)mm. The T.V Unit top shall be made out of 25 mm thick BWR ply of approved

shade, design and colour The unit have bottom & shelf made out of 25 mm thick BWR

ply of approved shade, design and colour. All exposed edges are sealed with 2mm

thick pvc edge banding tape pressed at 200 degree C with hot melt glue on special

24 machines. The under structure shall be made out of 18 mm thick BWR ply with NOS. 4 149.00 596.00

combination with 25 mm thick BWR ply . The

T.V Unit is having drawer made of 18 mm thick BWR ply run on the channel. all BWR

ply both side .8 laminate etc. all complete.

Supplying and placing in position of Premium sofa upholstered with fire retardant

fabric as per image. Hidden Sofa frame work made in seasoned SYP pine wood with

mortise joint and Exposed frame made in teak wood with Die-Cast Bronze inserts in

Back, hand rest, arm, legs and frames as per the Image. framework finished by using

3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU

sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1”

25 to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as

required on seat, arms & back.

All Visible natural walnut veneer/Wood surfaces to finished with P.U. polish matte finish

(2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired shade

The product should be complete as per the reference image and the specification

3 Seater above under the guidance of project Architect & Engineer Incharge. NOS. 2 87,345.00 1,74,690.00

b Single Seater NOS. 1 34,592.00 34,592.00

Supplying and placing in position of Center Table of size 1200x600x450 mm as per

image with Complete Structure made out of teak wood with hand crafted work in legs

and top top 12 mm thick glass as per the Image.

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

26 achieve desired shade and finish). NOS. 1 34,592.00 34,592.00

Table top to be finish with high gloss polyester 8 coat or more complete to achieve

desired shade and finish.

LIVING ROOM The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Supplying and placing in position of Corner Table of size 600x600x500 mm as per

image with Complete Structure made out of teak wood with hand crafted work in legs

and top top 12 mm thick glass as per the Image.

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

27 achieve desired shade and finish). NOS. 2 23,061.00 46,122.00

Table top to be finish with high gloss polyester 8 coat or more complete to achieve

desired shade and finish.

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Providing and placing in position Dinning Table with 6 Chair as per photograph. Dining

Table: Commercial plywood with natural walnut veneer Hard wood ( Disjoint possible)

Table Dimensions : 1800mm * 900mm * 750mm.

Dining Chair: solid wood chair in semi matt polish finish, With clean lines, sleek angles,

28 a soft seat, and an open frame, The seat of these chair is upholstered in micro fibre NOS. 1 1,90,256.00 1,90,256.00

fabric of approved colour.

Providing and placing in position of 45mm thk Workstations without pedestal as per

photograph of Indo make.

Size 1200mm(w)x600mm(d)x 750/1200(ht)

Screen:- Glass Screen of 300mm ht with MS bracket

WORKTOP :- Work top made up of 25mm thick BWR ply board with.8 laminate all

exposed edges sealed with 2mm thick pvc edge banding tape,

Under structure :- 50 x 50 Metal Droit leg with connecting beam.

WIREMANAGEMENT:- Metal Flapper with cable tray & wire riser for carrying wiring.

Providing and Fixing Pedestal as per photograph. size :- 400(w) x 450 ( d) x 600(ht).

Pedestal are made of 18mm thick BWR ply including .8 laminate with 2 drawer +

1Filing .The drawer are made mobile with use of castors. The Drawer units are

provided with center locking arrangement. The Drawer units are provided with center

30 locking arrangement, all exposed edges are sealed with 2mm thick pvc edge banding NOS. 7 10481.00 73367 -

tape pressed at 200 degree C with hot melt glue on special machines

Supplying and placing ergonomically designed, comfortable & aesthetically appealing

Medium back chair. The seat shall be made of 12mm thick hot pressed commercial

plywood upholstered with high resilience moulded polyurethane foam having density

48kg/m³ with foam net tapestry. The seat shall be upholstered with fabric tapestry

0.8mm thick and 300 GSM and the back shall be made of polypropylene net cover

upholstered with breathable mesh tapestry. The backrest shall be made with contoured

lumbar support and maintain the natural curvature of the spine. The chair shall be

supplied with adjustable arm with 2way arm adjustment.. The chair shall have:

31 Standard seat depth with multi lock seat sliding mechanism,. The pneumatic seat NOS. 7 20,871.00 1,46,097.00

height adjustment for healthy seating, user can adjust seat height up to 100mm with

BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The

Pedestal should have five legged injection moulded black nylon having pitch circle dia.

650 mm fitted with 5 nos. twin wheel castors which shall be made of injection moulded

in 30% glass filled nylon having self lubricating property for friction free movement,

confirming to ANSI/BIFMA standards .

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

TABLE WITH SIDE STORAGE & BACK STORAGE

Table Size: (L)1800mm X (D)750mm X (H)750mm.

Side Storage Size: 1650(w) x 450(d) x 650(ht) MM ,

WorkTop - Table top made up of 25mm thick BWR ply with 2mm thick pvc edge

Modesty Panel - made up of 18mm thick BWR ply with 2mm thick pvc edge banding

tape. Modesty is of 600mm ht..

Metal Leg :- The Leg is made out of MS duly powder coated of size 60x30mm Loop

Leg of approved shade and colour. The leg is connected with beam. Table is supported

with Metal leg on one side and other side it is supported on Side Storage.

Mobile Pedestal :- Pedestal are made of 18mm thick BWR ply with 2 drawer + 1Filing 62,888.00 1,25,776.00

.The Drawer units are provided with center locking arrangement

Side Storage :- The Storage top shall be made out of 25 mm thick BER ply of

approved shade, design and colour. All exposed edges are sealed with 2mm thick pvc

edge banding tape pressed at 200 degree C with hot melt glue on special machines.

The under structure shall be made out of 18 mm thick BWR ply. The storage is having

one side openable shutter with locking arrangement & other side 2 eq drawer and open

space in between. all BWR ply both side .8 mm laminate etc. all complete.

Supplying and placing ergonomically designed, comfortable & aesthetically appealing

High back chair. The seat shall be made of 12mm thick hot pressed commercial

plywood upholstered with high resilience moulded polyurethane foam having density

48kg/m³ with foam net tapestry. The seat shall be upholstered with fabric tapestry

0.8mm thick and 300 GSM and the back shall be made of polypropylene net cover

TFC / DISPATCH upholstered with breathable mesh tapestry. The backrest shall be made with contoured

OFFICE lumbar support and maintain the natural curvature of the spine. The chair shall be

supplied with adjustable arm with 2way arm adjustment.. The chair shall have:

33 Standard seat depth with multi lock seat sliding mechanism,. The pneumatic seat NOS. 2 21,332.00 42,664.00

height adjustment for healthy seating, user can adjust seat height up to 100mm with

BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The

Pedestal should have five legged injection moulded black nylon having pitch circle dia.

650 mm fitted with 5 nos. twin wheel castors which shall be made of injection moulded

in 30% glass filled nylon having self lubricating property for friction free movement,

confirming to ANSI/BIFMA standards .

Supplying and placing ergonomically designed, comfortable & aesthetically appealing

Medium back chair. The seat shall be made of 12mm thick hot pressed commercial

plywood upholstered with high resilience moulded polyurethane foam having density

48kg/m³ with foam net tapestry. The seat shall be upholstered with fabric tapestry

0.8mm thick and 300 GSM and the back shall be made of polypropylene net cover

upholstered with breathable mesh tapestry. The backrest shall be made with contoured

lumbar support and maintain the natural curvature of the spine. The chair shall be

supplied with adjustable arm with 2way arm adjustment.. The chair shall have:

34 Standard seat depth with multi lock seat sliding mechanism,. The pneumatic seat NOS. 4 20,871.00 83,484.00

height adjustment for healthy seating, user can adjust seat height up to 100mm with

BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The

Pedestal should have five legged injection moulded black nylon having pitch circle dia.

650 mm fitted with 5 nos. twin wheel castors which shall be made of injection moulded

in 30% glass filled nylon having self lubricating property for friction free movement,

confirming to ANSI/BIFMA standards .

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

TABLE WITH SIDE STORAGE & BACK STORAGE

Table Size: (L)1800mm X (D)750mm X (H)750mm.

Side Storage Size: 1750(w) x 450(d) x 650(ht) MM ,

Back Storage Size: 1800(w) x 450(d) x 650(ht) MM ,

WorkTop - Table top made up of 43mm thick BWR ply with 2mm thick pvc edge

Modesty Panel - made up of 25mm thickBWR ply with 2mm thick pvc edge banding

tape. Modesty is of 600mm ht..

Gable end :- made up of 43mm thick BWR ply with 2mm thick pvc edge banding tape.

Table is supported with 25mm leg on one side and other side it is supported on Side

Mobile Pedestal :- Pedestal are made of 18mm thick BWR ply with 2 drawer + 1Filing

35 .The Drawer units are provided with center locking arrangement NOS. RATE ONLY 85,016.00

Side Storage :- The Storage top shall be made out of 25 mm thick BWR ply of

approved shade, design and colour. All exposed edges are sealed with 2mm thick pvc

edge banding tape pressed at 200 degree C with hot melt glue on special machines.

The under structure shall be made out of 18 mm thick BWR ply. The storage is having

one side openable shutter with locking arrangement & other side 2 eq drawer and open

space in between.

Storage Top made up of 25mm thick BWR ply with 2mm thick pvc edge banding tape.

Storage carcass & shutter is 18mm thick BWR ply having Openable shutter with locking

arrangement & 18mm thk. BWR ply shelves. all BWR ply both side .8 laminate etc. all

TABLE WITH SIDE STORAGE & BACK STORAGE

Table Size: (L)1800mm X (D)750mm X (H)750mm. Side

unit Size: 1000(w) x 450(d)x650(ht) MM, Back Storage Size:1800(w)x450(d)x650(ht).

Supplying and placing in position of Office table as per image. The table top are made

out of 42mm thk BWR plywood (IS:303 grade) with 4mm thk burl natural walnut veneer.

Modesty and side panel to be made up of 20mm thk BWR plywood (IS:303 grade) with

4mm thk natural walnut veneer. All working edges shall be provided with teak wood

moulding fixed using special hot melt glue at hot temperature. Complete as per image

including raised and filled work and teak wood and natural walnut veneer. Table top to

be finish with high gloss polyester 8 coat or more complete to achieve desired shade

All Visible natural walnut veneer/Wood surfaces to finished with P.U. polish matte

finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired

shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Providing and supplying a high back chair with ergonomic design, comfortable &

aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial

plywood padded with high resilience polyurethane foam having density 48kg/m³ and

the back shall be made of moulded plywood padded with high resilience polyurethane

foam having density 32kg/m³. The seat and back shall be upholstered with leathered

tapestry 0.7mm thick and 535 GSM. The backrest shall be made by keeping the natural

curvature of the spine which helps to provide full back support as well as head support.

The chair shall be supplied with SS finish with cushion arm having leathered top

completely joint with seat. For seating durability the chair shall have synchrony knee tilt

360 degree revolving mechanism and tilt tension adjustment which provides back

37 NOS. RATE ONLY 20,179.00

strength for the chair. The pneumatic seat height adjustment for healthy seating, user

can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them

using the lever under the seat. The Pedestal should have five legged made of MS

Chrome finish having pitch circle dia. 650 mm fitted with 5 nos. twin wheel castors. The

castors of the chair should be injection moulded in black 30% glass filled nylon having

self lubricating property for friction free movement, confirming to ANSI/BIFMA.

Providing and supplying a high back chair with ergonomic design, comfortable &

aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial

plywood padded with high resilience polyurethane foam having density 48kg/m³ and

the back shall be made of moulded plywood padded with high resilience polyurethane

foam having density 32kg/m³. The seat and back shall be upholstered with leathered

tapestry 0.7mm thick and 535 GSM. The backrest shall be made by keeping the natural

curvature of the spine which helps to provide full back support as well as head support.

38 The chair shall be supplied with Wooden arm completely joint with seat. The NOS. 2 53,185.00 106370

pneumatic seat height adjustment for healthy seating, user can adjust seat height up to

100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat.

The Pedestal should have five legged made of Wooden finish having pitch circle dia.

650 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be

injection moulded in black 30% glass filled nylon having self lubricating property for

friction free movement, confirming to ANSI/BIFMA.

Providing and supplying a Mid back chair with ergonomic design, comfortable &

aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial

plywood padded with high resilience polyurethane foam having density 48kg/m³ and

the back shall be made of moulded plywood padded with high resilience polyurethane

foam having density 32kg/m³. The seat and back shall be upholstered with leathered

tapestry 0.7mm thick and 535 GSM. The backrest shall be made by keeping the natural

curvature of the spine which helps to provide full back support as well as head support.

The chair shall be supplied with SS finish with cushion arm having leathered top

completely joint with seat. For seating durability the chair shall have synchrony knee tilt

360 degree revolving mechanism and tilt tension adjustment which provides back

39 NOS. RATE ONLY 19,026.00

strength for the chair. The pneumatic seat height adjustment for healthy seating, user

can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them

using the lever under the seat. The Pedestal should have five legged made of MS

Chrome finish having pitch circle dia. 650 mm fitted with 5 nos. twin wheel castors.

The castors of the chair should be injection moulded in black 30% glass filled nylon

having self lubricating property for friction free movement, confirming to ANSI/BIFMA

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

"Supplying and placing in position of Study chair.

chair Seat frame of size: Frame made out of 70x 30mm 2nd Class Teak wood frame

along with soft foam for a comfortable seat. The seat cushion is made of 75mm foam

of density 32-35kg/ m3 fixed over 12mm BWR ply finished with fire retardant fabric of

approved shade.

Chair back frame and Hand rest: frame and hand rest shall be made out of 40x40mm

2nd Class Teak wood frame along with soft foam for a comfortable back. The back

cushion is made of 25mm foam of density 32-35kg/ m3 fixed over 12mm BWR ply

DIRECTOR finished with fire retardant fabric (both front and back) of approved shade . The chair

having legs of size 40mm x 40mm thk at upper side and 25mm x 20mm thk at

bottom side are made out of 2nd Class teak wood.

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge."

Supplying and placing in position of 2 Seater Sofa upholstered with fire retardant fabric

as per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise

joint. and Exposed made in teak wood, framework of size 125x27 mm arms finished by

using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core

PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness

1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort

41 as required on seat, arms & back. NOS. RATE ONLY 44,970.00

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Supplying and placing in position of Premium 2 Seater sofa upholstered with fire

retardant fabric as per image. Hidden Sofa frame work made in seasoned SYP pine

wood with mortise joint and Exposed frame made in teak wood with Die-Cast Bronze

inserts in Back, hand rest, arm, legs and frames as per the Image. framework finished

by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core

PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness

42 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort NOS. 1 71,432.00 71432

as required on seat, arms & back.

All Visible natural walnut veneer/Wood surfaces to finished with P.U. polish matte finish

(2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired shade

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Providing and supplying in position of 2 Seater Sofa seating of standard size as per

photograph. Sofa frame shall be made up of hard wood and Wooden frame .The sofa

has a spring and fine quality of marking & coir. The cushioned seat and back should

be upholstered with polyurethane high quality Fabric. The foam shall be made of

43 polyurethane having density of 40- 45 kg/cubic meter. Used high quality Fabric. NOS. RATE ONLY 41,337.00

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

"Supplying and placing in position of side Table of size 1200 x 600 x450 mm with

Structure made out of teak wood leg member of size 45x45 mm and 4 connecting Teak

wood member of size 45x30 mm with . Table top made with 70x25 wide border in teak

wood with 12 mm glass and one bottom shelf with 18 mm ply including 4 mm veneer .

All visible edge to be covered with 2nd Class teak wood/ natural wooden paper veneer

lipping etc. all complete.

44 All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U. NOS. RATE ONLY 23,061.00

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge."

Supplying and placing in position of Corner Table of size 1200 dia x450 mm ht. with

Structure made out of teak wood curved shaped leg member of size 70x40 mm and 4

connecting Teak wood member of size 45x30 mm with round shape shelf in 18mm

BWR ply finished with 4mm teak natural walnut veneer. Table top made with 18 mm

BWR ply and 6 mm wide border in 18 mm BWR ply to increase total thickness to 26

mm with 4 mm thick METALLO MAPPA bural veneer. All visible edge to be covered

with 2nd Class teak wood/ natural wooden paper veneer lipping etc. all complete.

45 All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U. NOS. 1 37,878.00 37878

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

Table top to be finish with high gloss polyester 8 coat or more complete to achieve

desired shade and finish.

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

"Supplying and placing in position of side Table of size 600 x 600 x450 mm with

Structure made out of teak wood leg member of size 45x45 mm and 4 connecting Teak

wood member of size 45x30 mm with . Table top made with 70x25 wide border in teak

wood with 12 mm glass and one bottom shelf with 18 mm ply including 4 mm veneer .

All visible edge to be covered with 2nd Class teak wood/ natural wooden paper veneer

lipping etc. all complete.

46 All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U. NOS. RATE ONLY 13,260.00

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge."

"Supplying and placing in position of side of size 600 mm dia 500 mm ht. Table with

Structure made out of teak wood tarning round one pilar shaped leg member of size

70x70 mm and 4 connecting Teak wood member of size 70x25 mm with round shape

shelf in 18mm BWR ply finished with 4mm teak natural walnut veneer. Table top made

with 6 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total

thickness to 26 mm with 4 mm thick METALLO MAPPA bural veneer. All visible edge to

be covered with 2nd Class teak wood/ natural wooden paper veneer lipping etc. all

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

Table top to be finish with high gloss polyester 8 coat or more complete to achieve

desired shade and finish.

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge."

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Supplying and placing in position of Meeting room table of size 1800x1000x725 mm

as per image. The table top are made out of 42mm thk BWR plywood (IS:303 grade)

with 4mm thk natural walnut veneer. Modesty /Support Leg to be made up of 42mm

thk BWR plywood (IS:303 grade) with 4mm thk natural walnut veneer. All working

edges shall be provided with teak wood moulding fixed using special hot melt glue at

48 hot temperature. NOS. 1 58,230.00 58,230.00

All Visible natural walnut veneer/Wood surfaces to finished with P.U. polish matte

finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired

shade and finish).

T be complete as per the reference image and the specification mentioned above

under the guidance of project Architect & Engineer Incharge.

Providing and supplying a Mid back chair with ergonomic design, comfortable &

aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial

plywood padded with high resilience polyurethane foam having density 48kg/m³ and

MEETING ROOM the back shall be made of plywood padded with high resilience polyurethane foam

having density 32kg/m³. The seat and back shall be upholstered with leathered tapestry

0.7mm thick and 535 GSM. The backrest shall be made by keeping the natural

curvature of the spine which helps to provide full back support as well as head support.

The chair shall be supplied with hard wood with polish cushion arm having leathered

49 top completely joint with seat & Back. For seating durability the chair shall have torsion NOS. 6 22,485.00 1,34,910.00

Bar 360 degree revolving mechanism and tilt tension adjustment which provides back

strength for the chair. The pneumatic seat height adjustment for healthy seating, user

can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them

using the lever under the seat. The Pedestal should have five legged made of

wooden Base having pitch circle dia. 700mm fitted with 5 nos. twin wheel castors. The

castors of the chair should be injection moulded in black 30% glass filled nylon having

self lubricating property for friction free movement, confirming to ANSI/BIFMA

TABLE WITH SIDE STORAGE & BACK STORAGE

Table Size: (L)1800mm X (D)750mm X (H)750mm.

Side Storage Size: 1750(w) x 450(d) x 650(ht) MM ,

WorkTop - Table top made up of 25mm thick BWR ply with 2mm thick pvc edge

Modesty Panel - made up of 18mm thick BWR ply with 2mm thick pvc edge banding

tape. Modesty is of 600mm ht..

Metal Leg :- The Leg is made out of MS .The leg is connected with beam. Table is

supported with Metal leg on one side and other side it is supported on Side Storage.

Mobile Pedestal :- Pedestal are made of 18mm thick BWR ply with 2 drawer + 1Filing

50 .The Drawer units are provided with center locking arrangement NOS. 2 75,699.00 1,51,398.00

Side Storage :- The Storage top shall be made out of 25 mm thick BWR ply of

approved shade, design and colour. All exposed edges are sealed with 2mm thick pvc

edge banding tape pressed at 200 degree C with hot melt glue on special machines.

The under structure shall be made out of 18 mm thick BWR ply. The storage is having

one side openable shutter with locking arrangement & other side 2 eq drawer. all BWR

ply both side .8 laminate etc. all complete.

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Providing and supplying a High back chair with ergonomic design, comfortable &

aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial

plywood padded with high resilience polyurethane foam having density 48kg/m³ and

the back shall be made of moulded plywood padded with high resilience polyurethane

foam having density 32kg/m³. The seat and back shall be upholstered with leathered

tapestry 0.7mm thick and 535 GSM. The backrest shall be made by keeping the natural

curvature of the spine which helps to provide full back support as well as head support.

SR. ASST. The armrest shall be made of PU Adjustable arms . For seating durability the chair

DIRECTOR/SAO shall have Multi Angle Synchro tilt 360 degree revolving mechanism and tilt tension

(CPAO) adjustment which provides back strength for the chair. The pneumatic seat height

adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA

standard class-3 gas-lift to suit them using the lever under the seat. The Pedestal

should have five legged made of MS Chrome finish having pitch circle dia. 650 mm

fitted with 5 nos. twin wheel castors. The castors of the chair should be injection

moulded in black 30% glass filled nylon having self lubricating property for friction free

movement, confirming to ANSI/BIFMA standards .

Providing and supplying a mid back chair with ergonomic design, comfortable &

aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial

plywood padded with high resilience polyurethane foam having density 48kg/m³ and

the back shall be made of moulded plywood padded with high resilience polyurethane

foam having density 32kg/m³. The seat and back shall be upholstered with leathered

tapestry 0.7mm thick and 535 GSM. The backrest shall be made by keeping the natural

curvature of the spine which helps to provide full back support as well as head support.

The armrest shall be made of PU Adjustable arms . For seating durability the chair

shall have Multi Angle Synchro tilt 360 degree revolving mechanism and tilt tension

52 adjustment which provides back strength for the chair. The pneumatic seat height NOS. 4 18,391.00 73,564.00

adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA

standard class-3 gas-lift to suit them using the lever under the seat. The Pedestal

should have five legged made of MS Chrome finish having pitch circle dia. 650 mm

fitted with 5 nos. twin wheel castors. The castors of the chair should be injection

moulded in black 30% glass filled nylon having self lubricating property for friction free

movement, confirming to ANSI/BIFMA standards.

TABLE WITH SIDE STORAGE

WorkTop - Table top made up of 25mm thick BWR ply with 2mm thick pvc edge

Modesty Panel - made up of 18mm thick BWR ply with 2mm thick pvc edge banding

Modesty is of 600mm ht..

Metal Leg :- The Leg is made out of MS duly powder coated of size 60x30mm Loop

Leg of approved shade and colour. The leg is connected with beam. Table is supported

with Metal leg on one side and other side it is supported on Side Storage.

53 Mobile Pedestal :- Pedestal are made of 18mm thick BWR ply with 2 drawer + 1Filing

.The Drawer units are provided with center locking arrangement

Side Storage :- The Storage top shall be made out of 25 mm thick BER ply of

approved shade, design and colour. All exposed edges are sealed with 2mm thick pvc

edge banding tape pressed at 200 degree C with hot melt glue on special machines.

The under structure shall be made out of 18 mm thick BWR ply. The storage is having

one side openable shutter with locking arrangement & other side 2 eq drawer and open

space in between. all BWR ply both side .8 mm laminate etc. all complete.

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Table Size: (L)1700mm X (D)750mm X (H)750mm. 62,888.00

Side Storage Size: 1650(w) x 450(d) x 650(ht) MM ,

Table Size: (L)1350mm X (D)750mm X (H)750mm. 34,938.00

Side Storage Size: 1650(w) x 450(d) x 650(ht) MM ,

Supplying and placing ergonomically designed, comfortable & aesthetically appealing

High back chair. The seat shall be made of 12mm thick hot pressed commercial

plywood upholstered with high resilience moulded polyurethane foam having density

48kg/m³ with foam net tapestry. The seat shall be upholstered with fabric tapestry

0.8mm thick and 300 GSM and the back shall be made of polypropylene net cover

upholstered with breathable mesh tapestry. The backrest shall be made with contoured

ASST.DIRECTOR lumbar support and maintain the natural curvature of the spine. The chair shall be

supplied with adjustable arm with 2way arm adjustment.. The chair shall have:

Standard seat depth with multi lock seat sliding mechanism,. The pneumatic seat

height adjustment for healthy seating, user can adjust seat height up to 100mm with

BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The

Pedestal should have five legged injection moulded black nylon having pitch circle dia.

650 mm fitted with 5 nos. twin wheel castors which shall be made of injection moulded

in 30% glass filled nylon having self lubricating property for friction free movement,

confirming to ANSI/BIFMA standards .

Supplying and placing ergonomically designed, comfortable & aesthetically appealing

Medium back chair. The seat shall be made of 12mm thick hot pressed commercial

plywood upholstered with high resilience moulded polyurethane foam having density

48kg/m³ with foam net tapestry. The seat shall be upholstered with fabric tapestry

0.8mm thick and 300 GSM and the back shall be made of polypropylene net cover

upholstered with breathable mesh tapestry. The backrest shall be made with contoured

lumbar support and maintain the natural curvature of the spine. The chair shall be

supplied with adjustable arm with 2way arm adjustment.. The chair shall have:

Standard seat depth with multi lock seat sliding mechanism,. The pneumatic seat

height adjustment for healthy seating, user can adjust seat height up to 100mm with

BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The

Pedestal should have five legged injection moulded black nylon having pitch circle dia.

650 mm fitted with 5 nos. twin wheel castors which shall be made of injection moulded

in 30% glass filled nylon having self lubricating property for friction free movement,

confirming to ANSI/BIFMA standards .

Providing and placing in position of Linear Workstation TOP Without Pedestal &

Partition of Indo make.

WORKTOP :- Work top made up of 25mm thick BWR ply with both side .8 mm

laminate all exposed edges sealed with 2mm thick pvc edge banding tape,

56 WIREMANAGEMENT:- Wire manager hole cut on the table top

a Worktop Size 1050mm(w)x600mm(d) NOS. 8 3,319.00 26,552.00

b Worktop Size 1200mm(w)x600mm(d) NOS. 50 3,727.00 1,86,350.00

c Worktop Size 1275mm(w)x600mm(d) NOS. 3 3,960.00 11,880.00

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Providing and Fixing Pedestal as per photograph. size :- 400(w) x 450 ( d) x 600(ht).

Pedestal are made of 18mm thick BWR ply including both side .8 laminate with 2

drawer + 1Filing .The drawer are made mobile with use of castors. The Drawer units

are provided with center locking arrangement. The Drawer units are provided with

57 center locking arrangement, all exposed edges are sealed with 2mm thick pvc edge NOS. 61 9,899.00 6,03,839.00

banding tape pressed at 200 degree C with hot melt glue on special machines

Supplying and placing ergonomically designed, comfortable & aesthetically appealing

Medium back chair. The seat shall be made of 12mm thick hot pressed commercial

plywood upholstered with high resilience moulded polyurethane foam having density

48kg/m³ with foam net tapestry. The seat shall be upholstered with fabric tapestry

0.8mm thick and 300 GSM and the back shall be made of polypropylene net cover

upholstered with breathable mesh tapestry. The backrest shall be made with contoured

lumbar support and maintain the natural curvature of the spine. The chair shall be

supplied with PU adjustable arm. The chair shall have synchrony tilt 360 degree

58 revolving mechanism with upright position locking. The pneumatic seat height NOS. 61 9,801.00 5,97,861.00

adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA

standard class-3 gas-lift to suit them using the lever under the seat. The Pedestal

should have five legged injection moulded black nylon having pitch circle dia. 650 mm

fitted with 5 nos. twin wheel castors which shall be made of injection moulded in 30%

glass filled nylon having self lubricating property for friction free movement, confirming

to ANSI/BIFMA standards.

Providing and Fixing Full Storage as per photograph. Size is

900(L)x450(D)x1800(Ht).The Storage top shall be made out of 18 mm thick BWR ply

with both side .8 laminate of approved shade, design and colour. All exposed edges

are sealed with 2mm thick pvc edge banding tape pressed at 200 degree C with hot

59 LOBBY AREA melt glue on special machines. The under structure shall be made out of 18 mm thick NOS. 12 21,254.00 2,55,048.00

BWR ply with both side .8 laminate. The storage is having openable shutter with

locking arrangement. The storage is having 18mm thk. BWR ply both side .8 laminate

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

TABLE WITH SIDE STORAGE & BACK STORAGE

Table Size: (L)1800mm X (D)750mm X (H)750mm.

Side Storage Size: 1750(w) x 450(d) x 650(ht) MM ,

Back Storage Size: 1800(w) x 450(d) x 650(ht) MM ,

WorkTop - Table top made up of 43mm thick BWR ply with 2mm thick pvc edge

Modesty Panel - made up of 25mm thickBWR ply with 2mm thick pvc edge banding

tape. Modesty is of 600mm ht..

Gable end :- made up of 43mm thick BWR ply with 2mm thick pvc edge banding tape.

Table is supported with 25mm leg on one side and other side it is supported on Side

60 Mobile Pedestal :- Pedestal are made of 18mm thick BWR ply with 2 drawer + 1Filing NOS. RATE ONLY 86,180.00

.The Drawer units are provided with center locking arrangement

Side Storage :- The Storage top shall be made out of 25 mm thick BWR ply of

approved shade, design and colour. All exposed edges are sealed with 2mm thick pvc

edge banding tape pressed at 200 degree C with hot melt glue on special machines.

The under structure shall be made out of 18 mm thick BWR ply. The storage is having

one side openable shutter with locking arrangement & other side 2 eq drawer and open

space in between.

Storage Top made up of 25mm thick BWR ply with 2mm thick pvc edge banding tape.

Storage carcass & shutter is 18mm thick BWR ply having Openable shutter with locking

arrangement & 18mm thk. BWR ply shelves. all BWR ply both side .8 laminate etc. all

TABLE WITH SIDE STORAGE & BACK STORAGE

Table Size: (L)1800mm X (D)750mm X (H)750mm. Side

unit Size: 1000(w) x 450(d)x650(ht) MM, Back Storage Size:1800(w)x450(d)x650(ht).

Supplying and placing in position of Office table as per image. The table top are made

out of 42mm thk BWR plywood (IS:303 grade) with 4mm thk burl natural walnut veneer.

Modesty and side panel to be made up of 20mm thk BWR plywood (IS:303 grade) with

4mm thk natural walnut veneer. All working edges shall be provided with teak wood

moulding fixed using special hot melt glue at hot temperature. Complete as per image

including raised and filled work and teak wood and natural walnut veneer. Table top to

be finish with high gloss polyester 8 coat or more complete to achieve desired shade

All Visible natural walnut veneer/Wood surfaces to finished with P.U. polish matte

finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired

shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Providing and supplying a high back chair with ergonomic design, comfortable &

aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial

plywood padded with high resilience polyurethane foam having density 48kg/m³ and

the back shall be made of moulded plywood padded with high resilience polyurethane

foam having density 32kg/m³. The seat and back shall be upholstered with leathered

tapestry 0.7mm thick and 535 GSM. The backrest shall be made by keeping the natural

curvature of the spine which helps to provide full back support as well as head support.

The chair shall be supplied with SS finish with cushion arm having leathered top

62 completely joint with seat. For seating durability the chair shall have synchrony knee tilt NOS. RATE ONLY 20,179.00

360 degree revolving mechanism and tilt tension adjustment which provides back

strength for the chair. The pneumatic seat height adjustment for healthy seating, user

can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them

using the lever under the seat. The Pedestal should have five legged made of MS

Chrome finish having pitch circle dia. 650 mm fitted with 5 nos. twin wheel castors. The

castors of the chair should be injection moulded in black 30% glass filled nylon having

self lubricating property for friction free movement, confirming to ANSI/BIFMA.

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Providing and supplying a high back chair with ergonomic design, comfortable &

aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial

plywood padded with high resilience polyurethane foam having density 48kg/m³ and

the back shall be made of moulded plywood padded with high resilience polyurethane

foam having density 32kg/m³. The seat and back shall be upholstered with leathered

tapestry 0.7mm thick and 535 GSM. The backrest shall be made by keeping the natural

curvature of the spine which helps to provide full back support as well as head support.

The chair shall be supplied with Wooden arm completely joint with seat. The

pneumatic seat height adjustment for healthy seating, user can adjust seat height up to

100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat.

The Pedestal should have five legged made of Wooden finish having pitch circle dia.

650 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be

injection moulded in black 30% glass filled nylon having self lubricating property for

friction free movement, confirming to ANSI/BIFMA.

Providing and supplying a Mid back chair with ergonomic design, comfortable &

aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial

plywood padded with high resilience polyurethane foam having density 48kg/m³ and

the back shall be made of moulded plywood padded with high resilience polyurethane

foam having density 32kg/m³. The seat and back shall be upholstered with leathered

tapestry 0.7mm thick and 535 GSM. The backrest shall be made by keeping the natural

curvature of the spine which helps to provide full back support as well as head support.

The chair shall be supplied with SS finish with cushion arm having leathered top

64 completely joint with seat. For seating durability the chair shall have synchrony knee tilt NOS. RATE ONLY 19,026.00

360 degree revolving mechanism and tilt tension adjustment which provides back

strength for the chair. The pneumatic seat height adjustment for healthy seating, user

can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them

using the lever under the seat. The Pedestal should have five legged made of MS

Chrome finish having pitch circle dia. 650 mm fitted with 5 nos. twin wheel castors.

The castors of the chair should be injection moulded in black 30% glass filled nylon

having self lubricating property for friction free movement, confirming to ANSI/BIFMA

"Supplying and placing in position of Study chair.

chair Seat frame of size: Frame made out of 70x 30mm 2nd Class Teak wood frame

along with soft foam for a comfortable seat. The seat cushion is made of 75mm foam

of density 32-35kg/ m3 fixed over 12mm BWR ply finished with fire retardant fabric of

approved shade.

Chair back frame and Hand rest: frame and hand rest shall be made out of 40x40mm

2nd Class Teak wood frame along with soft foam for a comfortable back. The back

cushion is made of 25mm foam of density 32-35kg/ m3 fixed over 12mm BWR ply

finished with fire retardant fabric (both front and back) of approved shade . The chair

65 having legs of size 40mm x 40mm thk at upper side and 25mm x 20mm thk at NOS. 6 23,811.00 142866

DEPUTY bottom side are made out of 2nd Class teak wood.

DIRECTOR All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

Table top to be finish with high gloss polyester 8 coat or more complete to achieve

desired shade and finish.

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge."

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Supplying and placing in position of Sofa upholstered with fire retardant fabric as per

image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint.

and Exposed made in teak wood, framework of size 125x27 mm arms finished by

using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core

PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness

1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort

66 as required on seat, arms & back.

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

a Single Seater Sofa NOS. RATE ONLY 32,430.00

b 3 Seater Sofa NOS. RATE ONLY 71,375.00

Supplying and placing in position of Premium sofa upholstered with fire retardant

fabric as per image. Hidden Sofa frame work made in seasoned SYP pine wood with

mortise joint and Exposed frame made in teak wood with Die-Cast Bronze inserts in

Back, hand rest, arm, legs and frames as per the Image. framework finished by using

3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core PU

sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness 1”

to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort as

required on seat, arms & back.

All Visible natural walnut veneer/Wood surfaces to finished with P.U. polish matte finish

(2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired shade

The product should be complete as per the reference image and the specification

a Single Seater Sofa NOS. 2 38,974.00 77948

b 3 Seater Sofa NOS. 2 86,192.00 172384

Providing and supplying in position of Sofa seating of standard size as per

photograph. Sofa frame shall be made up of hard wood and Wooden frame .The sofa

has a spring and fine quality of marking & coir. The cushioned seat and back should

68 be upholstered with polyurethane high quality Fabric. The foam shall be made of

polyurethane having density of 40- 45 kg/cubic meter. Used high quality Fabric.

Single Seater Sofa 21,332.00

a NOS. RATE ONLY

"Supplying and placing in position of side Table of size 1200 x 600 x450 mm with

Structure made out of teak wood leg member of size 45x45 mm and 4 connecting Teak

wood member of size 45x30 mm with . Table top made with 70x25 wide border in teak

wood with 12 mm glass and one bottom shelf with 18 mm ply including 4 mm veneer .

All visible edge to be covered with 2nd Class teak wood/ natural wooden paper veneer

69 lipping etc. all complete. NOS. RATE ONLY 20,075.00

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge."

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Supplying and placing in position of Corner Table of size 1200 dia x450 mm ht. with

Structure made out of teak wood curved shaped leg member of size 70x40 mm and 4

connecting Teak wood member of size 45x30 mm with round shape shelf in 18mm

BWR ply finished with 4mm teak natural walnut veneer. Table top made with 18 mm

BWR ply and 6 mm wide border in 18 mm BWR ply to increase total thickness to 26

mm with 4 mm thick METALLO MAPPA bural veneer. All visible edge to be covered

with 2nd Class teak wood/ natural wooden paper veneer lipping etc. all complete.

70 All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U. NOS. 1 37,878.00 37878

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

Table top to be finish with high gloss polyester 8 coat or more complete to achieve

desired shade and finish.

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

"Supplying and placing in position of side Table of size 600 x 600 x450 mm with

Structure made out of teak wood leg member of size 45x45 mm and 4 connecting Teak

wood member of size 45x30 mm with . Table top made with 70x25 wide border in teak

wood with 12 mm glass and one bottom shelf with 18 mm ply including 4 mm veneer .

All visible edge to be covered with 2nd Class teak wood/ natural wooden paper veneer

lipping etc. all complete.

71 NOS. RATE ONLY 10,752.00

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge."

"Supplying and placing in position of side of size 600 mm dia 500 mm ht. Table with

Structure made out of teak wood tarning round one pilar shaped leg member of size

70x70 mm and 4 connecting Teak wood member of size 70x25 mm with round shape

shelf in 18mm BWR ply finished with 4mm teak natural walnut veneer. Table top made

with 6 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total

thickness to 26 mm with 4 mm thick METALLO MAPPA bural veneer. All visible edge to

be covered with 2nd Class teak wood/ natural wooden paper veneer lipping etc. all

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

Table top to be finish with high gloss polyester 8 coat or more complete to achieve

desired shade and finish.

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge."

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

TABLE WITH SIDE STORAGE

WorkTop - Table top made up of 25mm thick BWR ply with 2mm thick pvc edge

Modesty Panel - made up of 18mm thick BWR ply with 2mm thick pvc edge banding

tape. Modesty is of 600mm ht..

Gable end :- Made up of 25mm thk BWR ply. Table is supported with Gable end on

one side and other side it is supported on Side Storage.

Mobile Pedestal :- Pedestal are made of 18mm thick BWR ply with 2 drawer + 1Filing

73 .The Drawer units are provided with center locking arrangement

Side Storage :- The Storage top shall be made out of 25 mm thick BWR ply of

approved shade, design and colour. All exposed edges are sealed with 2mm thick pvc

edge banding tape pressed at 200 degree C with hot melt glue on special machines.

The under structure shall be made out of 18 mm thick BWR ply. The storage is having

one side openable shutter with locking arrangement & other side 2 eq drawer. Her side

2 eq drawer and open space in between. all BWR ply both side .8 mm laminate etc. all

Table Size: (L)1700mm X (D)750mm X (H)750mm. 53,653.00

Side Storage Size: 1650(w) x 450(d) x 650(ht) MM ,

Table Size: (L)1350mm X (D)750mm X (H)750mm. 46,933.00

Side Storage Size: 1650(w) x 450(d) x 650(ht) MM ,

Supplying and placing ergonomically designed, comfortable & aesthetically appealing

High back chair. The seat shall be made of 12mm thick hot pressed commercial

plywood upholstered with high resilience moulded polyurethane foam having density

48kg/m³. The seat shall be upholstered with fabric tapestry 0.8mm thick and 300 GSM

and the back shall be made of polypropylene net cover upholstered with breathable

The backrest shall be made with contoured lumbar support and maintain the natural

ASST.DIRECTOR / curvature of the spine. Cushion headrest shall be provided for comfort of head. The

NIC CABIN chair shall be supplied with PU adjustable arm. The chair shall have Synchro knee tilt

360 degree revolving mechanism with upright position locking with tilt adjustment . The

pneumatic seat height adjustment for healthy seating, user can adjust seat height up to

100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat.

The Pedestal shall be made up of injection moulded black nylon having pitch circle Dia

650 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be

injection moulded in black 30% glass filled nylon filled having self lubricating property

for friction free movement , confirming to ANSI/BIFMA standards.

Supplying and placing ergonomically designed, comfortable & aesthetically appealing

Mid back chair. The seat shall be made of 12mm thick hot pressed commercial plywood

upholstered with high resilience moulded polyurethane foam having density 48kg/m³.

The seat shall be upholstered with fabric tapestry 0.8mm thick and 300 GSM and the

back shall be made of polypropylene net cover upholstered with breathable mesh

The backrest shall be made with contoured lumbar support and maintain the natural

curvature of the spine. The chair shall be supplied with PU adjustable arm. The chair

shall have Synchro knee tilt 360 degree revolving mechanism with upright position

locking with tilt adjustment . The pneumatic seat height adjustment for healthy seating,

user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit

them using the lever under the seat. The Pedestal shall be made up of injection

moulded black nylon having pitch circle Dia 650 mm fitted with 5 nos. twin wheel

castors. The castors of the chair should be injection moulded in black 30% glass filled

nylon filled having self lubricating property for friction free movement , confirming to

ANSI/BIFMA standards

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Providing and placing in position of Linear Workstation TOP Without Pedestal &

Partition of Indo make.

WORKTOP :- Work top made up of 25mm thick BWR ply with both side .8 mm

laminate all exposed edges sealed with 2mm thick pvc edge banding tape,

76 WIREMANAGEMENT:- Wire manager hole cut on the table top

a Worktop Size 1200mm(w)x600mm(d) NOS. 74 2,772.00 2,05,128.00

Providing and Fixing Pedestal as per photograph. size :- 400(w) x 450 ( d) x 600(ht).

Pedestal are made of 18mm thick BWR ply including both side. .8 laminate with 2

drawer + 1Filing .The drawer are made mobile with use of castors. The Drawer units

are provided with center locking arrangement. The Drawer units are provided with

77 center locking arrangement, all exposed edges are sealed with 2mm thick pvc edge NOS. 74 8,356.00 6,18,344.00

banding tape pressed at 200 degree C with hot melt glue on special machines

Supplying and placing ergonomically designed, comfortable & aesthetically appealing

Medium back chair. The seat shall be made of 12mm thick hot pressed commercial

plywood upholstered with high resilience moulded polyurethane foam having density

48kg/m³ with foam net tapestry. The seat shall be upholstered with fabric tapestry

0.8mm thick and 300 GSM and the back shall be made of polypropylene net cover

upholstered with breathable mesh tapestry. The backrest shall be made with contoured

lumbar support and maintain the natural curvature of the spine. The chair shall be

supplied with PU adjustable arm. The chair shall have synchrony tilt 360 degree

78 revolving mechanism with upright position locking. The pneumatic seat height NOS. 74 8,544.00 6,32,256.00

adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA

standard class-3 gas-lift to suit them using the lever under the seat. The Pedestal

should have five legged injection moulded black nylon having pitch circle dia. 650 mm

fitted with 5 nos. twin wheel castors which shall be made of injection moulded in 30%

glass filled nylon having self lubricating property for friction free movement, confirming

to ANSI/BIFMA standards.

Providing and Fixing Full Storage as per photograph. Size is

900(L)x450(D)x1800(Ht).The Storage top shall be made out of 18 mm thick BWR ply

with both side .8 laminate of approved shade, design and colour. All exposed edges

are sealed with 2mm thick pvc edge banding tape pressed at 200 degree C with hot

79 LOBBY AREA melt glue on special machines. The under structure shall be made out of 18 mm thick NOS. 12 21254.00 255048

BWR ply with both side .8 laminate. The storage is having openable shutter with

locking arrangement. The storage is having 18mm thk. BWR ply both side .8 laminate

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

TABLE WITH SIDE STORAGE & BACK STORAGE

Table Size: (L)2400x1050x X (D)750mm X (H)750mm. Side

unit Size: 1200(w) x 500(d)x750(ht) MM, Back Storage Size:2400(w)x450(d)x750(ht).

Supplying and placing in position of Office table as per image. The table top are made

out of 42mm thk BWR plywood (IS:303 grade) with 4mm thk burl natural walnut veneer.

Modesty and side panel to be made up of 20mm thk BWR plywood (IS:303 grade) with

4mm thk natural walnut veneer. All working edges shall be provided with teak wood

moulding fixed using special hot melt glue at hot temperature. Complete as per image

80 NOS. RATE ONLY 2,38,742.00

including raised and filled work and teak wood and natural walnut veneer. Table top to

be finish with high gloss polyester 8 coat or more complete to achieve desired shade

All Visible natural walnut veneer/Wood surfaces to finished with P.U. polish matte

finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired

shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

TABLE WITH SIDE STORAGE & BACK STORAGE

Table Size: (L)2400x1050x X (D)750mm X (H)750mm. Side

unit Size: 1200(w) x 500(d)x750(ht) MM, Back Storage Size:2400(w)x450(d)x750(ht).

Supplying and placing in position of Office table as per image. The table top are made

out of 42mm thk BWR plywood (IS:303 grade) with 4mm thk burl natural walnut veneer.

Modesty and side panel to be made up of 20mm thk BWR plywood (IS:303 grade) with

4mm thk natural walnut veneer. All working edges shall be provided with teak wood

moulding fixed using special hot melt glue at hot temperature. Complete as per image

and oriental design wooden leg including raised and filled work and teak wood and

81 natural walnut veneer. Table top to be finish with high gloss polyester 8 coat or more NOS. 1 2,63,034.00 263034

complete to achieve desired shade and finish.

All Visible natural walnut veneer/Wood surfaces to finished with P.U. polish matte

finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired

shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Providing and supplying a high back chair with ergonomic design, comfortable &

aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial

plywood padded with high resilience polyurethane foam having density 48kg/m³ and

the back shall be made of moulded plywood padded with high resilience polyurethane

foam having density 32kg/m³. The seat and back shall be upholstered with leathered

tapestry 0.7mm thick and 535 GSM. The backrest shall be made by keeping the natural

curvature of the spine which helps to provide full back support as well as head support.

The chair shall be supplied with cushion arm having leathered top completely joint with

82 seat. The pneumatic seat height adjustment for healthy seating, user can adjust seat NOS. 1 50,850.00 50,850.00

height up to 100mm with BIFMA standard class-3 gas-lift to suit them using the lever

under the seat. The Pedestal should have five legged made of Wooden finish having

pitch circle dia.

650 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be

injection moulded in black 30% glass filled nylon having self lubricating property for

friction free movement, confirming to ANSI/BIFMA.

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

"Supplying and placing in position of chair with arms.

chair Seat frame of size: Frame made out of 70x 30mm 1nd Class Teak wood frame

along with soft foam for a comfortable seat. The seat cushion is made of 65mm foam

of density 32-35kg/ m3 fixed over 12mm BWR ply finished with fire retardant fabric of

approved shade.

Chair back frame and Hand rest: frame and hand rest shall be made out of 40x40mm

2nd Class Teak wood frame along with soft foam for a comfortable back. The back

cushion is made of 25mm foam of density 32-35kg/ m3 fixed over 12mm BWR ply

finished with fire retardant fabric (both front and back) of approved shade . The chair

having legs of size 70mm x 70mm thk at upper side and 25mm x 20mm thk at

bottom side are made out of 2nd Class teak wood. including hand work carving

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge."

Supplying and placing in position of Sofa coated upholstered with fire retardant

fabric/polyurethane high quality leathered as per image. Hidden Sofa frame work made

in seasoned SYP pine wood with mortise joint. and Exposed made in teak wood,

framework finished by using 3” elastic Newer. On top of that Hessian cloth has to put.

Followed by pin core PU sheet of minimum 4” thick and on top of this feather foam of

32 density of thickness 1” to 2” as required in seat arms & back. On top of this polyfil

84 for shape & extra comfort as required on seat, arms & back.

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

"Supplying and placing in position of side of size 600 mm dia 500 mm ht. Table with

Structure made out of teak wood tarning round one pilar shaped leg member of size

70x70 mm and 4 connecting Teak wood member of size 70x25 mm with round shape

shelf in 18mm BWR ply finished with 4mm teak natural walnut veneer. Table top made

with 6 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total

thickness to 26 mm with 4 mm thick METALLO MAPPA bural veneer. All visible edge to

be covered with 2nd Class teak wood/ natural wooden paper veneer lipping etc. all

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

Table top to be finish with high gloss polyester 8 coat or more complete to achieve

desired shade and finish.

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge."

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Fabrication, Supply and fixing of Open book shelf. Size: 900(w) x 450 (d) x

Complete Structure made up of 18mm BWP ply with 12mm BWP Ply on back side,

finished with 4mm natural walnut veneer on visible faces and 0.8mm laminate on Inside

usable face. rack to have provision of 2 drawer with 18 mm BWR ply with .8 mm

laminate three wooden shelves including all assecories etc. all complete.

Open Rack Structure made up of 18mm BWP ply finished with 4mm natural walnut

veneer with visible frame thickness of 45mm. including top Cornish and round pillar

86 wooden moulding . NOS. 1 75,814.00 75,814.00

50mm high and 18mm recessed skirting to be provided and to be finished with 4mm

natural walnut veneer.

All Visible natural walnut veneer/Wood surfaces to finished with P.U. polish matte finish

(2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired shade

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

"Supplying and placing in position of side of size 1200 mm dia 450 mm ht. Table with

Structure made out of teak wood tarning round one pilar shaped leg member of size

200x200 mm and 4 connecting Teak wood member of size 70x70 mm with round

shape shelf in 18mm BWR ply finished with 4mm teak natural walnut veneer. Table top

made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total

thickness to 36 mm with 4 mm thick METALLO MAPPA bural veneer. All visible edge to

be covered with 2nd Class teak wood/ natural wooden paper veneer lipping etc. all

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

Table top to be finish with high gloss polyester 8 coat or more complete to achieve

desired shade and finish.

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge."

"Supplying and placing in position of chair with arms.

chair Seat frame of size: Frame made out of 70x 30mm 1nd Class Teak wood frame

along with soft foam for a comfortable seat. The seat cushion is made of 65mm foam

of density 32-35kg/ m3 fixed over 12mm BWR ply finished with fire retardant fabric of

approved shade.

Chair back frame and Hand rest: frame and hand rest shall be made out of 40x40mm

2nd Class Teak wood frame along with soft foam for a comfortable back. The back

cushion is made of 25mm foam of density 32-35kg/ m3 fixed over 12mm BWR ply

88 finished with fire retardant fabric (both front and back) of approved shade . The chair NOS. 4 36,610.00 1,46,440.00

having legs of size 70mm x 70mm thk at upper side and 25mm x 20mm thk at

bottom side are made out of 2nd Class teak wood. including hand work carving

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge."

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Supplying and placing in position of conference room table as per image. The table

should be provided in modules of single Seater / 2 Seater. The dimensions for single

Seater should be 760mm (L) x 600mm (W) x 750mm (H) and two Seater should be

1350 (L) X 600 (D) X 750 (H). The work surface top should be of thickness 32mm BWR

plywood (IS:303 grade) with top 4 mm thk natural walnut veneer with pu polish . The

side panel are made up of 25mm thk BWR plywood with 0.8mm thk post laminate &

modesty panel made out of 25mm thk BWR plywood with post laminate . The legs of

89 the table should be made from 25mm BWR plywood with 0.8mm thk post laminate .

The working and non working edges shall be finished with machine pressed PVC edge

banding. The wire carrier should Made from 0.8mm thick CRCA & powder coated 40-50

microns . Also provision of 6 module flip top box (20 no's) for the scope of USB point,

Electrical Connections, internet connection, LAN point to be provided & metal raceway

below the table top for wire flow. The product should be complete as per the reference

image and the specification mentioned above under the guidance of project Architect

& Engineer Incharge.

a Overall Size: 6600(w1) x 2550(w2) x 600 (d) x 750(Ht)mm. NOS. RATE ONLY 5,29,038.00

Supplying and placing in position of Meeting room table 6600(w) x 2550(d) x

750(Ht)mm as per image. The table top are made out of 42mm thk BWR plywood

(IS:303 grade) with 4mm thk natural walnut veneer. Modesty /Support Leg to be made

up of 42mm thk BWR plywood (IS:303 grade) with 4mm thk natural walnut veneer. All

working edges shall be provided with teak wood moulding fixed using special hot melt

glue at hot temperature.

All Visible natural walnut veneer/Wood surfaces to finished with P.U. polish matte

CONFERENCE finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired

ROOM shade and finish).

The wire carrier should Made from 0.8mm thick CRCA & powder coated 40-50 microns

. Also provision of 6 module flip top box (11 no's) for the scope of USB point,

Electrical Connections, internet connection, LAN point to be provided & metal raceway

below the table top for wire flow.

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Providing and supplying a Mid back chair with ergonomic design, comfortable &

aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial

plywood padded with high resilience polyurethane foam having density 48kg/m³ and

the back shall be made of plywood padded with high resilience polyurethane foam

having density 32kg/m³. The seat and back shall be upholstered with laterite tapestry

0.7mm thick and 535 GSM. The backrest shall be made by keeping the natural

curvature of the spine which helps to provide full back support as well as head support.

The chair shall be supplied with hard wood with polish cushion arm having laterite top

91 completely joint with seat & Back. For seating durability the chair shall have torsion Bar NOS. 48 22,485.00 10,79,280.00

360 degree revolving mechanism and tilt tension adjustment which provides back

strength for the chair. The pneumatic seat height adjustment for healthy seating, user

can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them

using the lever under the seat. The Pedestal should have five legged made of

wooden Base having pitch circle dia. 700mm fitted with 5 nos. twin wheel castors. The

castors of the chair should be injection moulded in black 30% glass filled nylon having

self lubricating property for friction free movement, confirming to ANSI/BIFMA

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Supplying and placing in position of Sofa upholstered with fire retardant fabric as per

image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint.

and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top

of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick

and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat

92 arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Supplying and placing in position of Sofa upholstered with fire retardant fabric as per

image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise joint.

and Exposed made in teak wood, framework finished by using 3” elastic Newer. On top

of that Hessian cloth has to put. Followed by pin core PU sheet of minimum 4” thick

and on top of this feather foam of 32 density of thickness 1” to 2” as required in seat

93 arms & back. On top of this polyfil for shape & extra comfort as required on seat, arms

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

a 3-Seater Sofa: 1900 (w)x800(D)x800(h) NOS. RATE ONLY 42,029.00

b 2-Seater Sofa: 1360 (w)x800(D)x800(h) NOS. RATE ONLY 30,576.00

Supplying and placing in position of Center Table of size 1125x600x425Ht

Table top and one side support made out of 18mm thk BWR plywood with 4mm thk

natural walnut natural walnut veneer. Top of the table to be finished finished with 4mm

natural walnut veneer and all two drawer with sliding with channel and internal finish .8

laminated as per approved with edge covered PCV machine position beading including

diffused joints. Front edge of table top to have complete as per image and leg made in

94 teak wood 45x45 mm torning design with 45x30 mm teak wooden frame work NOS. RATE ONLY 29,749.00

All Visible natural walnut veneer/Wood surfaces to finished with P.U. polish matte finish

(2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired shade

The product should be complete as per the reference image and the specification

WAITING LOBBY mentioned above under the guidance of project Architect & Engineer Incharge.

Supplying and placing in position of center Table of size. 1200x600x450 mm with

Structure made out of teak wood turning design shaped leg member of size 80x80 mm

and 4 connecting Teak wood member of size 70x28 mm with top wooden frame of size

80x28 mm with 12 mm thick smok glass . All visible edge to be covered with teak wood

biding 25x18 mm including hand carving work etc. all complete.

95 All Visible Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 NOS. 3 47,910.00 143730

coat of PU polish and rubbing complete to achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Supplying and placing in position of corner Table of size 600x600x500 mm Ht

Table top and one side support made out of 18mm thk BWR plywood with 4mm thk

natural walnut natural walnut veneer. Top of the table to be finished finished with 4mm

natural walnut veneer edge covered teak wood round shape beading including

diffused joints. Front edge of table top to have complete as per image. and leg made

18mm thk BWR plywood with 4mm thk natural walnut natural walnut veneer

96 All Visible natural walnut veneer/Wood surfaces to finished with P.U. polish matte finish NOS. RATE ONLY 10,476.00

(2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired shade

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

"Supplying and placing in position of side of size 1200 mm dia 450 mm ht. Table with

Structure made out of teak wood tarning round one pilar shaped leg member of size

90x90 mm and 4 connecting Teak wood member of size 70x70 mm with round shape

shelf in 18mm BWR ply finished with 4mm teak natural walnut veneer. Table top made

with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total

thickness to 36 mm with 4 mm thick METALLO MAPPA bural veneer. All visible edge to

be covered with 2nd Class teak wood/ natural woodened paper veneer lipping etc. all

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

Table top to be finish with high gloss polyester 8 coat or more complete to achieve

desired shade and finish.

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge."

TABLE WITH SIDE STORAGE & BACK STORAGE

Table Size: (L)1800mm X (D)750mm X (H)750mm.

Side Storage Size: 1750(w) x 450(d) x 650(ht) MM ,

Back Storage Size: 1800(w) x 450(d) x 650(ht) MM ,

Worktop - Table top made up of 43mm thick BWR ply with 2mm thick pvc edge

Modesty Panel - made up of 25mm thickBWR ply with 2mm thick pvc edge banding

tape. Modesty is of 600mm ht..

Gable end :- made up of 43mm thick BWR ply with 2mm thick pvc edge banding tape.

Table is supported with 25mm leg on one side and other side it is supported on Side

98 Mobile Pedestal :- Pedestal are made of 18mm thick BWR ply with 2 drawer + 1Filing NOS. RATE ONLY 90,965.00

.The Drawer units are provided with center locking arrangement

Side Storage :- The Storage top shall be made out of 25 mm thick BWR ply of

approved shade, design and colour. All exposed edges are sealed with 2mm thick pvc

edge banding tape pressed at 200 degree C with hot melt glue on special machines.

The understructure shall be made out of 18 mm thick BWR ply. The storage is having

one side openable shutter with locking arrangement & other side 2 eq drawer and open

space in between.

Storage Top made up of 25mm thick BWR ply with 2mm thick pvc edge banding tape.

Storage carcass & shutter is 18mm thick BWR ply having Openable shutter with locking

arrangement & 18mm thk. BWR ply shelves. all BWR ply both side .8 laminate etc. all

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

TABLE WITH SIDE STORAGE & BACK STORAGE

Table Size: (L)1800mm X (D)750mm X (H)750mm. Side

unit Size: 1000(w) x 450(d)x650(ht) MM, Back Storage Size:1800(w)x450(d)x650(ht).

Supplying and placing in position of Office table as per image. The table top are made

out of 42mm thk BWR plywood (IS:303 grade) with 4mm thk burl natural walnut veneer.

Modesty and side panel to be made up of 20mm thk BWR plywood (IS:303 grade) with

4mm thk natural walnut veneer. All working edges shall be provided with teak wood

moulding fixed using special hot melt glue at hot temperature. Complete as per image

99 including raised and filled work and teak wood and natural walnut veneer. Table top to NOS. 4 2,12,683.00 850732

be finish with high gloss polyester 8 coat or more complete to achieve desired shade

All Visible natural walnut veneer/Wood surfaces to finished with P.U. polish matte

finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired

shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Providing and supplying a high back chair with ergonomic design, comfortable &

aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial

plywood padded with high resilience polyurethane foam having density 48kg/m³ and

the back shall be made of moulded plywood padded with high resilience polyurethane

foam having density 32kg/m³. The seat and back shall be upholstered with leatherite

tapestry 0.7mm thick and 535 GSM. The backrest shall be made by keeping the natural

curvature of the spine which helps to provide full back support as well as head support.

The chair shall be supplied with SS finish with cushion arm having leatherite top

100 completely joint with seat. For seating durability the chair shall have synchro knee tilt NOS. RATE ONLY 20,179.00

360 degree revolving mechanism and tilt tension adjustment which provides back

strength for the chair. The pneumatic seat height adjustment for healthy seating, user

can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them

using the lever under the seat. The Pedestal should have five legged made of MS

Chrome finish having pitch circle dia. 650 mm fitted with 5 nos. twin wheel castors. The

castors of the chair should be injection moulded in black 30% glass filled nylon having

self lubricating property for friction free movement, confirming to ANSI/BIFMA.

Providing and supplying a high back chair with ergonomic design, comfortable &

aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial

plywood padded with high resilience polyurethane foam having density 48kg/m³ and

the back shall be made of moulded plywood padded with high resilience polyurethane

foam having density 32kg/m³. The seat and back shall be upholstered with leatherite

tapestry 0.7mm thick and 535 GSM. The backrest shall be made by keeping the natural

curvature of the spine which helps to provide full back support as well as head support.

101 The chair shall be supplied with Wooden arm completely joint with seat. The NOS. 4 53,185.00 212740

pneumatic seat height adjustment for healthy seating, user can adjust seat height up to

100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat.

The Pedestal should have five legged made of Wooden finish having pitch circle dia.

650 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be

injection moulded in black 30% glass filled nylon having self lubricating property for

friction free movement, confirming to ANSI/BIFMA.

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Providing and supplying a Mid back chair with ergonomic design, comfortable &

aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial

plywood padded with high resilience polyurethane foam having density 48kg/m³ and

the back shall be made of moulded plywood padded with high resilience polyurethane

foam having density 32kg/m³. The seat and back shall be upholstered with leatherite

tapestry 0.7mm thick and 535 GSM. The backrest shall be made by keeping the natural

curvature of the spine which helps to provide full back support as well as head support.

The chair shall be supplied with SS finish with cushion arm having leatherite top

completely joint with seat. For seating durability the chair shall have synchro knee tilt

360 degree revolving mechanism and tilt tension adjustment which provides back

102 NOS. RATE ONLY 19,026.00

strength for the chair. The pneumatic seat height adjustment for healthy seating, user

can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them

using the lever under the seat. The Pedestal should have five legged made of MS

Chrome finish having pitch circle dia. 650 mm fitted with 5 nos. twin wheel castors.

The castors of the chair should be injection moulded in black 30% glass filled nylon

having self lubricating property for friction free movement, confirming to ANSI/BIFMA

"Supplying and placing in position of Study chair.

chair Seat frame of size: Frame made out of 70x 30mm 2nd Class Teak wood frame

along with soft foam for a comfortable seat. The seat cushion is made of 75mm foam

of density 32-35kg/ m3 fixed over 12mm BWR ply finished with fire retardant fabric of

approved shade.

Chair back frame and Hand rest: frame and hand rest shall be made out of 40x40mm

2nd Class Teak wood frame along with soft foam for a comfortable back. The back

103 cushion is made of 25mm foam of density 32-35kg/ m3 fixed over 12mm BWR ply NOS. 12 23,811.00 285732

finished with fire retardant fabric (both front and back) of approved shade . The chair

having legs of size 40mm x 40mm thk at upper side and 25mm x 20mm thk at

bottom side are made out of 2nd Class teak wood.

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge."

Supplying and placing in position of 3 Seater Sofa upholstered with fire retardant fabric

as per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise

joint. and Exposed made in teak wood, framework of size 125x27 mm arms finished by

using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core

PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness

104 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort NOS. RATE ONLY 71,375.00

as required on seat, arms & back.

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Supplying and placing in position of 2 Seater Sofa upholstered with fire retardant fabric

ROOM FOR as per image. Hidden Sofa frame work made in seasoned SYP pine wood with mortise

DIRECTOR / joint. and Exposed made in teak wood, framework of size 125x27 mm arms finished by

ROOM FOR ADC using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core

PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness

105 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort NOS. RATE ONLY 52,724.00

as required on seat, arms & back.

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Supplying and placing in position of Premium 3 Seater sofa upholstered with fire

retardant fabric as per image. Hidden Sofa frame work made in seasoned SYP pine

wood with mortise joint and Exposed frame made in teak wood with Die-Cast Bronze

inserts in Back, hand rest, arm, legs and frames as per the Image. framework finished

by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core

PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness

1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort

106 as required on seat, arms & back. NOS. 5 86,192.00 430960

All Visible natural walnut veneer/Wood surfaces to finished with P.U. polish matte finish

(2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired shade

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Supplying and placing in position of Premium 2 Seater sofa upholstered with fire

retardant fabric as per image. Hidden Sofa frame work made in seasoned SYP pine

wood with mortise joint and Exposed frame made in teak wood with Die-Cast Bronze

inserts in Back, hand rest, arm, legs and frames as per the Image. framework finished

by using 3” elastic Newer. On top of that Hessian cloth has to put. Followed by pin core

PU sheet of minimum 4” thick and on top of this feather foam of 32 density of thickness

107 1” to 2” as required in seat arms & back. On top of this polyfil for shape & extra comfort NOS. 1 71,432.00 71,432.00

as required on seat, arms & back.

All Visible natural walnut veneer/Wood surfaces to finished with P.U. polish matte finish

(2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired shade

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

"Supplying and placing in position of side Table of size 1200 x 600 x450 mm with

Structure made out of teak wood leg member of size 45x45 mm and 4 connecting Teak

wood member of size 45x30 mm with . Table top made with 70x25 wide border in teak

wood with 12 mm glass and one bottom shelf with 18 mm ply including 4 mm veneer .

All visible edge to be covered with 2nd Class teak wood/ natural woodened paper

108 veneer lipping etc. all complete. NOS. RATE ONLY 23,534.00

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge."

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Supplying and placing in position of Corner Table of size 1200 dia x450 mm ht. with

Structure made out of teak wood curved shaped leg member of size 70x40 mm and 4

connecting Teak wood member of size 45x30 mm with round shape shelf in 18mm

BWR ply finished with 4mm teak natural walnut veneer. Table top made with 18 mm

BWR ply and 6 mm wide border in 18 mm BWR ply to increase total thickness to 26

mm with 4 mm thick METALLO MAPPA bural veneer. All visible edge to be covered

with 2nd Class teak wood/ natural woodened paper veneer lipping etc. all complete.

109 All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U. NOS. 4 37,878.00 151512

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

Table top to be finish with high gloss polyester 8 coat or more complete to achieve

desired shade and finish.

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

"Supplying and placing in position of side Table of size 600 x 600 x450 mm with

Structure made out of teak wood leg member of size 45x45 mm and 4 connecting Teak

wood member of size 45x30 mm with . Table top made with 70x25 wide border in teak

wood with 12 mm glass and one bottom shelf with 18 mm ply including 4 mm veneer .

All visible edge to be covered with 2nd Class teak wood/ natural woodened paper

110 veneer lipping etc. all complete. NOS. RATE ONLY 14,212.00

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge."

"Supplying and placing in position of side of size 600 mm dia 500 mm ht. Table with

Structure made out of teak wood tarning round one pilar shaped leg member of size

70x70 mm and 4 connecting Teak wood member of size 70x25 mm with round shape

shelf in 18mm BWR ply finished with 4mm teak natural walnut veneer. Table top made

with 6 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total

thickness to 26 mm with 4 mm thick METALLO MAPPA bural veneer. All visible edge to

be covered with 2nd Class teak wood/ natural woodened paper veneer lipping etc. all

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

Table top to be finish with high gloss polyester 8 coat or more complete to achieve

desired shade and finish.

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge."

"Supplying and placing in position of side of size 1200 mm dia 450 mm ht. Table with

Structure made out of teak wood tarning round one pilar shaped leg member of size

200x200 mm and 4 connecting Teak wood member of size 70x70 mm with round

shape shelf in 18mm BWR ply finished with 4mm teak natural walnut veneer. Table top

made with 18 mm BWR ply and 50 mm wide border in 18 mm BWR ply to increase total

thickness to 36 mm with 4 mm thick METALLO MAPPA bural veneer. All visible edge to

be covered with 2nd Class teak wood/ natural woodened paper veneer lipping etc. all

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

Table top to be finish with high gloss polyester 8 coat or more complete to achieve

desired shade and finish.

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge."

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

"Supplying and placing in position of Study chair.

chair Seat frame of size: Frame made out of 70x 30mm 2nd Class Teak wood frame

along with soft foam for a comfortable seat. The seat cushion is made of 75mm foam

of density 32-35kg/ m3 fixed over 12mm BWR ply finished with fire retardant fabric of

approved shade.

Chair back frame and Hand rest: frame and hand rest shall be made out of 40x40mm

2nd Class Teak wood frame along with soft foam for a comfortable back. The back

cushion is made of 25mm foam of density 32-35kg/ m3 fixed over 12mm BWR ply

113 finished with fire retardant fabric (both front and back) of approved shade . The chair NOS. 4 23,811.00 95,244.00

having legs of size 40mm x 40mm thk at upper side and 25mm x 20mm thk at

bottom side are made out of 2nd Class teak wood.

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

Table top to be finish with high gloss polyester 8 coat or more complete to achieve

desired shade and finish.

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge."

TABLE WITH SIDE STORAGE

Worktop - Table top made up of 25mm thick BWR ply with 2mm thick pvc edge binding

Modesty Panel - made up of 18mm thick BWR ply with 2mm thick pvc edge binding

tape. Modesty is of 600mm ht..

Gable end :- Made up of 25mm thk BWR ply. Table is supported with Gable end on

one side and other side it is supported on Side Storage.

114 Mobile Pedestal :- Pedestal are made of 18mm thick BWR ply with 2 drawer + 1Filing

.The Drawer units are provided with center locking arrangement

Side Storage :- The Storage top shall be made out of 25 mm thick BWR ply of

approved shade, design and colour. All exposed edges are sealed with 2mm thick pvc

edge binding tape pressed at 200 degree C with hot melt glue on special machines.

The understructure shall be made out of 18 mm thick BWR ply. The storage is having

one side openable shutter with locking arrangement & other side 2 equal drawer. Other

side 2 equal drawer and open space in between. all BWR ply both side .8 mm laminate

etc all complete.

Table Size: (L)1700mm X (D)750mm X (H)750mm.

Side Storage Size: 1650(w) x 450(d) x 650(ht) MM ,

Table Size: (L)1350mm X (D)750mm X (H)750mm.

Side Storage Size: 1650(w) x 450(d) x 650(ht) MM ,

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Supplying and placing ergonomically designed, comfortable & aesthetically appealing

High back chair. The seat shall be made of 12mm thick hot pressed commercial

plywood upholstered with high resilience moulded polyurethane foam having density

48kg/m³. The seat shall be upholstered with fabric tapestry 0.8mm thick and 300 GSM

and the back shall be made of polypropylene net cover upholstered with breathable

The backrest shall be made with contoured lumbar support and maintain the natural

curvature of the spine. Cushion headrest shall be provided for comfort of head. The

chair shall be supplied with PU adjustable arm. The chair shall have Synchro knee tilt

360 degree revolving mechanism with upright position locking with tilt adjustment . The

pneumatic seat height adjustment for healthy seating, user can adjust seat height up to

100mm with BIFMA standard class-3 gas-lift to suit them using the lever under the seat.

The Pedestal shall be made up of injection moulded black nylon having pitch circle Die

650 mm fitted with 5 nos. twin wheel castors. The castors of the chair should be

injection moulded in black 30% glass filled nylon filled having self lubricating property

for friction free movement , confirming to ANSI/BIFMA standards.

SECTION OF Supplying and placing ergonomically designed, comfortable & aesthetically appealing

DEVELOPMENT Mid back chair. The seat shall be made of 12mm thick hot pressed commercial plywood

COMMISSIONER / upholstered with high resilience moulded polyurethane foam having density 48kg/m³.

PERSONAL The seat shall be upholstered with fabric tapestry 0.8mm thick and 300 GSM and the

SECTION OF ADC back shall be made of polypropylene net cover upholstered with breathable mesh

/ PERSONAL tapestry.

SECTION OF DIR / The backrest shall be made with contoured lumbar support and maintain the natural

PERSONAL curvature of the spine. The chair shall be supplied with PU adjustable arm. The chair

116 SECTION OF JDC shall have Synchro knee tilt 360 degree revolving mechanism with upright position NOS. 10 10,262.00 1,02,620.00

locking with tilt adjustment . The pneumatic seat height adjustment for healthy seating,

user can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit

them using the lever under the seat. The Pedestal shall be made up of injection

moulded black nylon having pitch circle Die 650 mm fitted with 5 nos. twin wheel

castors. The castors of the chair should be injection moulded in black 30% glass filled

nylon filled having self lubricating property for friction free movement , confirming to

ANSI/BIFMA standards

Providing & fixing table with pedestal for as per photograph. The primary work surface

shall be made from 25mm thick BWR ply with both side .8 mm laminate , Edge banded

with matching 2mm thick PVC lipping. Modesty Panel shall be made of 18mm thick

BWR ply Edge banded with matching 2mm thick PVC lipping. Gable end shall be made

117 of 25mm thick BWR ply .Pedestal are made of 18mm thick BWR ply with 2 drawer +

1Filing .The Drawer units are provided with center locking arrangement all ply with both

side .8 laminate etc. all complete.

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Supplying and placing ergonomically designed, comfortable & aesthetically appealing

Medium back chair. The seat shall be made of 12mm thick hot pressed commercial

plywood upholstered with high resilience moulded polyurethane foam having density

48kg/m³ with foam net tapestry. The seat shall be upholstered with fabric tapestry

0.8mm thick and 300 GSM and the back shall be made of polypropylene net cover

upholstered with breathable mesh tapestry. The backrest shall be made with contoured

lumbar support and maintain the natural curvature of the spine. The chair shall be

supplied with PU adjustable arm. The chair shall have synchro tilt 360 degree 10,274.00 1,43,836.00

revolving mechanism with upright position locking. The pneumatic seat height

adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA

standard class-3 gas-lift to suit them using the lever under the seat. The Pedestal

should have five legged injection moulded black nylon having pitch circle dia. 650 mm

fitted with 5 nos. twin wheel castors which shall be made of injection moulded in 30%

glass filled nylon having self lubricating property for friction free movement, confirming

to ANSI/BIFMA standards.

Supplying and placing in position of Meeting room table as per image. The table top

are made out of 42mm thk BWR plywood (IS:303 grade) with 4mm thk natural walnut

veneer. Modesty /Support Leg to be made up of 42mm thk BWR plywood (IS:303

grade) with 4mm thk natural walnut veneer. All working edges shall be provided with

teak wood moulding fixed using special hot melt glue at hot temperature.

All Visible natural walnut veneer/Wood surfaces to finished with P.U. polish matte

finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired

119 shade and finish).

The wire carrier should Made from 0.8mm thick CRCA & powder coated 40-50 microns

. Also provision of 6 module flip top box (11 no's) for the scope of USB point,

Electrical Connections, internet connection, LAN point to be provided & metal raceway

below the table top for wire flow.

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Providing and supplying a Mid back chair with ergonomic design, comfortable &

aesthetically appealing. The seat shall be made of 15mm thick hot pressed commercial

CONFERENCE plywood padded with high resilience polyurethane foam having density 48kg/m³ and

ROOM the back shall be made of plywood padded with high resilience polyurethane foam

having density 32kg/m³. The seat and back shall be upholstered with leatherite tapestry

0.7mm thick and 535 GSM. The backrest shall be made by keeping the natural

curvature of the spine which helps to provide full back support as well as head support.

The chair shall be supplied with hard wood with polish cushion arm having leatherite

top completely joint with seat & Back. For seating durability the chair shall have torsion

Bar 360 degree revolving mechanism and tilt tension adjustment which provides back

strength for the chair. The pneumatic seat height adjustment for healthy seating, user

120 can adjust seat height up to 100mm with BIFMA standard class-3 gas-lift to suit them NOS. 82 22,485.00 18,43,770.00

using the lever under the seat. The Pedestal should have five legged made of

wooden Base having pitch circle dia. 700mm fitted with 5 nos. twin wheel castors. The

castors of the chair should be injection moulded in black 30% glass filled nylon having

self lubricating property for friction free movement, confirming to ANSI/BIFMA

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Supplying and placing in position of center Table of size. 1800x900x750 mm with

Structure made out of teak wood turning design shaped leg member of size 60x60 mm

and 3 connecting Teak wood member of size 45x30 mm with top wooden moulding

30x18 BWR ply 18 mm thick ply with bural veneer . All visible edge to be covered with

teak wood biding 25x18 mm including hand work including 2 drawer with 18 mm BWR

121 ply with .8 mm laminate including all edge covered PVC biding etc. all complete. NOS. 6 59,383.00 3,56,298.00

All Visible Wood surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1

coat of PU polish and rubbing complete to achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge.

Fabrication, Supply and fixing of Open book shelf. Size: 900(w) x 450 (d) x

1800(Ht)mm Complete Structure made up of 18mm BWP ply with 12mm BWP Ply on

back side, finished with 4mm natural walnut veneer on visible faces and 0.8mm

laminate on Inside usable face. rack to have provision of doors with 18 mm BWR ply

with .8 mm laminate three wooden shelves including all assecories etc. all complete.

Open Rack Structure made up of 18mm BWP ply finished with 4mm natural walnut

veneer with visible frame thickness of 45mm. including top cornice and round pillar

122 wooden moulding .50mm high and 18mm recessed skirting to be provided and to be NOS. 8 84,750.00 6,78,000.00

finished with 4mm natural walnut veneer. All Visible natural walnut veneer/Wood

surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish

and rubbing complete to achieve desired shade and finish). The product should be

complete as per the reference image and the specification mentioned above under the

guidance of project Architect & Engineer Incharge.

Fabrication, Supply and fixing of Open book shelf. Size: 900(w) x 450 (d) x

LIBRARY 1800(Ht)mm Complete Structure made up of 18mm BWP ply with 12mm BWP Ply on

back side, finished with 4mm natural walnut veneer on visible faces and 0.8mm

laminate on Inside usable face. rack to have provision of 2 drawer with 18 mm BWR ply

with .8 mm laminate three wooden shelves including all assecories etc. all complete.

Open Rack Structure made up of 18mm BWP ply finished with 4mm natural walnut

123 veneer with visible frame thickness of 45mm. including top cornice and round pillar NOS. 1,01,931.00

wooden moulding . 50mm high and 18mm recessed skirting to be provided and to be

finished with 4mm natural walnut veneer. All Visible natural walnut veneer/Wood

surfaces to finished with P.U. polish matte finish (2 coat of sealer, 1 coat of PU polish

and rubbing complete to achieve desired shade and finish). The product should be

complete as per the reference image and the specification mentioned above under the

guidance of project Architect & Engineer Incharge.

"Supplying and placing in position of Study chair.

chair Seat frame of size: Frame made out of 70x 30mm 2nd Class Teak wood frame

along with soft foam for a comfortable seat. The seat cushion is made of 75mm foam

of density 32-35kg/ m3 fixed over 12mm BWR ply finished with fire retardant fabric of

approved shade.

Chair back frame and Hand rest: frame and hand rest shall be made out of 40x40mm

2nd Class Teak wood frame along with soft foam for a comfortable back. The back

124 cushion is made of 25mm foam of density 32-35kg/ m3 fixed over 12mm BWR ply NOS. 24 23,811.00 5,71,464.00

finished with fire retardant fabric (both front and back) of approved shade . The chair

having legs of size 40mm x 40mm thk at upper side and 25mm x 20mm thk at

bottom side are made out of 2nd Class teak wood.

All Visible natural walnut veneer/Wood surfaces (except table top) to finished with P.U.

polish matte finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to

achieve desired shade and finish).

The product should be complete as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer Incharge."

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

TABLE WITH SIDE STORAGE

Worktop - Table top made up of 25mm thick BWR ply with 2mm thick pvc edge

Modesty Panel - made up of 18mm thick BWR ply with 2mm thick pvc edge banding

Modesty is of 600mm ht..

Metal Leg :- The Leg is made out of MS duly powder coated of size 60x30mm Loop

Leg of approved shade and colour. The leg is connected with beam. Table is supported

with Metal leg on one side and other side it is supported on Side Storage.

125 Mobile Pedestal :- Pedestal are made of 18mm thick BWR ply with 2 drawer + 1Filing

.The Drawer units are provided with center locking arrangement

Side Storage :- The Storage top shall be made out of 25 mm thick BER ply of

approved shade, design and colour. All exposed edges are sealed with 2mm thick pvc

edge banding tape pressed at 200 degree C with hot melt glue on special machines.

The under structure shall be made out of 18 mm thick BWR ply. The storage is having

one side openable shutter with locking arrangement & other side 2 eq drawer and open

space in between. all BWR ply both side .8 mm laminate etc. all complete.

Table Size: (L)1700mm X (D)750mm X (H)750mm. 67,800.00

Side Storage Size: 1650(w) x 450(d) x 650(ht) MM ,

Supplying and placing ergonomically designed, comfortable & aesthetically appealing

High back chair. The seat shall be made of 12mm thick hot pressed commercial

plywood upholstered with high resilience moulded polyurethane foam having density

48kg/m³ with foam net tapestry. The seat shall be upholstered with fabric tapestry

0.8mm thick and 300 GSM and the back shall be made of polypropylene net cover

upholstered with breathable mesh tapestry. The backrest shall be made with contoured

lumbar support and maintain the natural curvature of the spine. The chair shall be

supplied with adjustable arm with 2way arm adjustment.. The chair shall have:

126 Standard seat depth with multi lock seat sliding mechanism,. The pneumatic seat NOS. 2 21,332.00 42,664.00

height adjustment for healthy seating, user can adjust seat height up to 100mm with

BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The

Pedestal should have five legged injection moulded black nylon having pitch circle dia.

650 mm fitted with 5 nos. twin wheel castors which shall be made of injection moulded

in 30% glass filled nylon having self lubricating property for friction free movement,

confirming to ANSI/BIFMA standards .

Supplying and placing ergonomically designed, comfortable & aesthetically appealing

Medium back chair. The seat shall be made of 12mm thick hot pressed commercial

plywood upholstered with high resilience moulded polyurethane foam having density

48kg/m³ with foam net tapestry. The seat shall be upholstered with fabric tapestry

0.8mm thick and 300 GSM and the back shall be made of polypropylene net cover

upholstered with breathable mesh tapestry. The backrest shall be made with contoured

lumbar support and maintain the natural curvature of the spine. The chair shall be

supplied with adjustable arm with 2way arm adjustment.. The chair shall have:

127 Standard seat depth with multi lock seat sliding mechanism,. The pneumatic seat NOS. 4 20,871.00 83,484.00

height adjustment for healthy seating, user can adjust seat height up to 100mm with

BIFMA standard class-3 gas-lift to suit them using the lever under the seat. The

Pedestal should have five legged injection moulded black nylon having pitch circle dia.

650 mm fitted with 5 nos. twin wheel castors which shall be made of injection moulded

in 30% glass filled nylon having self lubricating property for friction free movement,

confirming to ANSI/BIFMA standards .

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

COMPACTOR (MECHANICAL DRIVE)

The KNOCK DOWN STORAGE UNITS shall be powder coated with epoxy polyester

powder with approximately overall height of 2080mm. Each unit will be of size

915x457x1980 mm. The body of the module shall be 0.8 mm thick CRCA steel The unit

shall be divided into five loading compartments by placing four shelves of .8 mm thick

CRCA steel. The unit or row of units shall rest on under structure of approximate height

65 mm made up of 3.15 mm thick hot rolled steel sheet which in turn shall rest on set of

128 rails 35 mm high consisting 'J'section 2 mm thick hot rolled sheet and 25 mm square

bar, both connected by screws. The rails shall be embedded to properly levelled ground

with the help of rawl plug and screw. The configuration shall consist of one single static

unit of depth 457 mm, twin mobile drive units of depth 915 mm as required and one last

STORE drive of depth' 457 mm. The cost will include all necessary fittings, locks, bolts, screws,

painting, powder coating and rails complete.

a SFF (CD-2) (Single face fixed) of size (1830Wx457Dx1980H) mm NOS. 4 60,219.00 2,40,876.00

b SFM (CD-2) (Single face Movable) of size (1830Wx457Dx1980H)mm NOS. 4 60,219.00 2,40,876.00

c DFM (CD-2) (Double face Movable) of size (1830Wx914Dx1980H)mm NOS. 12 1,39,780.00 16,77,360.00

d SFF (CD-3) (Single face fixed) of size (2745Wx457Dx1980H) mm NOS. 3 1,05,188.00 3,15,564.00

e SFM (CD-3) (Single face Movable) of size (2745Wx457Dx1980H)mm NOS. 3 1,05,188.00 3,15,564.00

f DFM (CD-3) (Double face Movable) of size (2745Wx914Dx1980H)mm NOS. 9 2,40,097.00 21,60,873.00

129 Providing and fixing of wooden panneling made out of 45x45 mm aluminium member

1.2 mm wall thick and base aluminium frame work of gread size approx. 600x600 mm

including fixing with MS L connector 1.2 mm thickness. Fixing 12 mm BWR ply on

Aluminium frame work with 4 mm thick natural walnut natural walnut veneer with

finished with P.U. polish matt finish (2 coat of sealer, 1 coat of PU polish and rubbing Sqm 140 8331.00 1166340

complete to achieve desired shade and finish).

The product should be completed as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer-in-charge."

130 Providing and fixing of wooden moulding on panneling work made out of 30x20 mm on

wooden moulding with finished with P.U. polish matt finish (2 coat of sealer, 1 coat of

PU polish and rubbing complete to achieve desired shade and finish). RM 140 836.00 117040

The product should be completed as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer-in-charge."

131 Providing and fixing of wooden Cornish on panneling work made out of

150x150/150x200 mm on wooden moulding with finished with P.U. polish matt finish (2

coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired shade and

The product should be completed as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer-in-charge."

132 DC & ADC Room

Providing and fixing of wooden partition made out of 45x45 mm aluminium member 1.2

mm wall thick and base aluminium frame work of grid size approx. 600x600 mm

including fixing with MS L connector 1.2 mm thickness. Fixing with both side 12 mm

BWR ply on Aluminium frame work with 4 mm thick natural walnut natural walnut

veneer with both side finished with P.U. polish matt finish (2 coat of sealer, 1 coat of

PU polish and rubbing complete to achieve desired shade and finish).

The product should be completed as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer-in-charge."

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

133 Providing and fixing of CNC designer cut 17 mm thick HDMR board with frame as per

design as finished with P.U. matt paint/polish matt finish (2 coat of sealer, 1 coat of PU

polish and rubbing complete to achieve desired shade and finish.

The product should be completed as per the reference image and the specification Sqm 145 8792.00 1274840

mentioned above under the guidance of project Architect & Engineer in-charge. "The

product should be completed as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer- in-charge.

Providing and fixing of designer wooden celling made out of fixing with MS L connector

1.2 mm thickness. Fixing 12 mm BWR ply on Aluminium frame work with 4 mm thick

natural walnut natural walnut veneer with finished with P.U. polish matt finish (2 coat of

sealer, 1 coat of PU polish and rubbing complete to achieve desired shade and finish).

The product should be completed as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer-in-charge."

135 Providing and fixing of designer solid wooden panel door made out of door frame of

side and top frame teak wood member of size 140x40 mm and bottom member of size

250x40 mm including stiffener of size 50x40 mm with teak wood moulding of size

25x20 mm with 4 mm thick natural walnut veneer with finished with P.U. polish matt

finish (2 coat of sealer, 1 coat of PU polish and rubbing complete to achieve desired

shade and finish).

The product should be completed as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer-in-charge

Providing and fixing of designer solid teak wood Door Frame made out of teak wood

member of size 250x60 mm including finished with P.U. polish matt finish (2 coat of

CHOKHAT sealer, 1 coat of PU polish and rubbing complete to achieve desired shade and finish). RM 5 9348.00 46740

The product should be completed as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer-in-charge

"Providing and fixing of plain glass 8 mm thick for door panel with designer and 30 mm

wide bevelled with around 4 sides including fixing with wooden moulding on door

The product should be completed as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer-in-charge.

"Providing and fixing of wooden moulding on panelling work made out of 70x20 mm on

wooden moulding with finished with P.U. polish matt finish (2 coat of sealer, 1 coat of

MOLDING PU polish and rubbing complete to achieve desired shade and finish). RM 5 2804.00 14020

The product should be completed as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer-in-charge.

Providing of hand/cnc carving with wooden panel 18 mm thick wood penal as per

design finished with P.U. polish matt finish (2 coat of sealer, 1 coat of PU polish and

Carving job rubbing complete to achieve desired shade and finish). Sqm 1 28044.00 28044

The product should be completed as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer-in-charge.

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at Plot No. 8

Nelson Mandela Marg New Delhi.

Bill of Quantities

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

S.NO LOCATION DESCRIPTION UNIT QTY RATE TOTAL AMOUNT REFERENCE IMAGE

Providing and fixing of main door handle antic design @ 6000 basic rate.

Handle The product should be completed as per the reference image and the specification pair 2 7946.00 15892

mentioned above under the guidance of project Architect & Engineer-in-charge.

Providing and fixing of main door hinges antic design @ 300 basic rate.

Hinge The product should be completed as per the reference image and the specification each 8 560.00 4480

mentioned above under the guidance of project Architect & Engineer-in-charge.

Providing and fixing of main door floor spring with brass top cover 1.6 mm thick @

10000 basic rate.

The product should be completed as per the reference image and the specification

mentioned above under the guidance of project Architect & Engineer-in-charge.

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT

Bill of Quantities

Name of Work: Supplying, Installation & Commissioning of Furniture and Furnishing work under Pkg-IV for the Construction of International Craft Complex at

Plot No. 8 Nelson Mandela Marg New Delhi.

BILL OF QUANTITY

S.No Item Description Unit Qty. Rate Amount Reference Image

1 Honeycomb Blinds

Providing and fixing of window blinds as per approved sample consisting of cell in cell, dual cell and single cell honeycomb shades with easy rise

operating system and standard design option original non-woven honeycomb shades having soft fabric appearance and high energy-efficient fabric with

high tear strength constructed out of anti static, anti-UV, damp proof, resilient, colour fast & sanitized treat 100% spun bonded non-woven polyester fibre &

precision manufacture to form a hexagonally shaped cell . Cell size 3Ú4”Honeycomb structure with distinct air pocket for energy efficiency and increased

insulation. Shadings are single tone facing both exterior and interior . Being a Low shading co-efficient will have following Comfort rating & solar optical

properties. Aluminium profile should have temper WP consisting of alloy 63400 along with anodizing of 10 micron and powder coating of 60 micron. The

tensile strength of profile should be 9.10 Kg/mm square (+-5%) and elongation 18 (+-5%) .The control clutch drive unit engineered heavy duty chain drive

pulley operating system consisting of gear clutch housing and locking plug containing minimum 6 ribs and inserted at minimum of 38 mm into roller tube. It

is self-lubricating exclusive clutch with safety pins for secure bracket installation and unlocking pin for quick manual removal. Universal clutch is most sqm 86.084 13324.32 1147011.107

convenient for large windows down to the smallest windows. It shall be driven by a ball chain pulley with ball chain and can be positioned at right hand or

left hand side of the shade. Clutch gear ratio of 1.75:1 for reduced operating force on larger blinds. Mounting hardware brackets universal brackets

including end plug bracket with lock down retainer device. Brackets finish of powder coated metal installation brackets made of stamped and hardened

steel. Roller tube circular-shaped aluminium tube extruded from alloy 63400 and temper WP. Bottom rail flat-shaped extruded aluminium from alloy 63400

and temper WP. Ball chain shall be 2mm diameter cord with plastic balls moulded to form an endless ball chain. It is used for raising or lowering action of

the shades. Plastic parts all plastic components are UV-stable compounds available white.

2 Open Roman Blinds

Providing and fixing of Twilight Series Blinds in band width 7.5 cm-12 cm and is made up of 100%

polyester, It comes in Width of 260 cm. Weight-480 gm2 (+-5%) 25% Thickness-1.30mm, Solar Reflectance- 35%-40% ,

Solar Absorptance- 59%-64%, Solar Transmittance-<0.1%, Ultra Violet Blocking UV-R-UV-R-99.9/ UV-A999/

UV-B:>99.9, Ultra Violet Protection Factor-50+/UV-A: <0.1/UV-8:01, Colorfastness Grey Scale. 4.5.

Twilight Blind tube is made of Aluminium with a diameter of 36mm, bottom rail is made of Aluminium with

powder coated having weight 390 gm/meter (+-5%) fitted with end caps in colour matching to the fabric and

mechanism is of plastic with chain and metal bracket. The Blinds comes with Aluminium cover with the

matching fabric designed on it Aluminium profile should have temper WP consisting of alloy 63400 along

with anodizing of 10 micron and powder coating of 60 micron. The tensile strength of profile should be

9.10 Kg/mm square (+-5%) and elongation 18 (+-5%) .The control clutch drive unit engineered heavy duty chain drive

pulley operating system consisting of gear clutch housing and locking plug containing minimum 6 ribs and

inserted at minimum of 38 mm into roller tube. It is self-lubricating Exclusive Dutch with safety pins for

secure bracket installation and unlocking pin for quick manual removal. Universal clutch is most

convenient for large windows down to the smallest windows. It shall be driven by a ball chain pulley with

ball chain and can be positioned at Right hand or Left hand side of the shade Clutch gear ratio of 1.75:1

for reduced operating force on larger blinds Mounting hardware brackets universal brackets including end

plug bracket with lock down retainer device. Brackets finish of powder coated metal installation brackets

made of stamped and hardened steel. Roller tube circular-shaped aluminium tube extruded from alloy

63400 and temper WP. Bottom rail flat-shaped extruded aluminium from alloy 63400 and temper WP Ball

chain shall be 2mm diameter cord with plastic balls moulded to form an endless ball chain It is used for

raising or lowering action of the shades Plastic parts all plastic components are UV-stable compounds

available white.

3 Shangri-La Blinds

Providing & fixing of Shangri-La series window blinds as per the approved sample , consisting of 3" vane size having width of vane as 82mm/58 mm. It

should have head rail, rotator rail and bottom rail made of aluminium alloy 6063-T6 PER ASTM B221 - 85 extruded profile, powder coated and provided in

standard natural white Color. The rolling tube should be made up of aluminium alloy from extruded profile of 34 mm dia . The head rail dimensions should

be of suitable size according to the length of head rail and space available and finished with fabric cover matching with the louver fabric .The cassette

should conceal the working mechanism rotary-clutch (White polycarbonate spring tempered rotary clutch which raises) lower and tilts the blinds. White

polycarbonate limit assemblies control vane over-rotation, located on either side of individual blinds. The room darkening fabric of blind should be of anti

static polyester vanes which have facings between two sheer layers (82 mm wide) to reduce glare. Sheer layers with spider mesh should be of white 100%

knit polyester, the colours, textures and opacities as approved. The fabric shall be made of spun-bonded 100% polyester fibre. Fabric weight should be 447

gsm (+_5%). Fire retardant fabric with pass American standard NFPA701. The shading to be operated by Easy rise mechanism with a continuous cord

loop operating system. All parts, components & hardware are in approved shade as per direction of engineer-in-charge. Aluminium profile should have

temper WP consisting of alloy 63400 along with anodizing of 10 micron and powder coating of 60 micron. The tensile strength of profile should be 9.10

Kg/mm (+-5%) square and elongation 18 (+-5%).The control clutch drive unit engineered heavy duty chain drive pulley operating system consisting of gear sqm 161.942 11684.41 1892196.271

clutch housing and locking plug containing minimum 6 ribs and inserted at minimum of 38mm into roller tube. It is self-lubricating exclusive clutch with

safety pins for secure bracket installation and unlocking pin for quick manual removal. Universal clutch is most convenient for large windows down to the

smallest windows. It shall be driven by a ball chain pulley with ball chain and can be positioned at right hand or left hand side of the shade. Clutch gear ratio

of 1.75:1 for reduced operating force on larger blinds. Mounting hardware brackets universal brackets including end plug bracket with lock down retainer

device. Brackets finish of powder coated metal installation brackets made of stamped and hardened steel. Roller tube circular-shaped aluminium tube

extruded from alloy 63400 and temper WP. Bottom rail flat-shaped extruded aluminium from alloy 63400 and temper WP. Ball chain shall be 2mm

diameter cord with plastic balls moulded to form an endless ball chain. It is used for raising or lowering action of the shades. Plastic parts all plastic

components are UV-stable compounds available white.

Total Amount 3990205.38

Total Amount 3990205.38

Digitally signed by

DEVENDRA DEVENDRA SINGH

Signature of Contractor NBCC

SINGH RAJPOOT RAJPOOT