REPAIR TO COMPOUND WALL, DRAINS, FENCING AND HARDSTANDING IN AREA A-1 OF AGE B/R-I UNDER GE (WEST) JALANDHAR CANTT

Amount

Demolition of brick work or stone/ boulder masonary built in cement mortar including all quoins, arches, pillars etc. but including ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:6) complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:6) but except brick complete all as specified and directed. (Old bricks dismantled under respective item shall be reused with cleaning of old bricks.)

Material and labour for brick work with sub class 'B' bricks, old size, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster of any description on brick or concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Material and labour for preparation of old decorated surface of walls and applying one coat of cement base paint complete all as specified and as directed by Engr-in-Charge.

Material and labour for complete removal of existing treatments by washing, rubbing down and stopping etc on wall surface and applying two coats of cement base paint complete all as specified and directed.

Material and labour for providing 35mm thick (measured solid) precast cement concrete louvres and jallies in PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregates) including all mouldings set in cement mortar (1:4), including all necessary form work and reinforcement and dismantling the existing jallies of any description the complete all as specified and directed .

Material and labour for cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in surface channel and drains etc, complete all as specified and as directed.

Material and labour for plain cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs benching etc, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified.

Demolition of cement concrete (reinforced) in ground floors and pavings not exc 15 cm thick below or above ground level complete all as specified and directed.

Material and labour for precast reinforced cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain faces in position and set in cement mortar 1:6 including necessary form work complete all as specified and directed.

Material and labour for mild steel high yield strength TMT bars 10mm dia and over cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Material and labour for framed work as in doors , gates , guard bar etc of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (Gde-E-250) Quality A complete all as specified and as directed.

Material and labour for preparation of new or previously untreated steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exc 15 cm thick below or above ground level complete all as specified and directed.

Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate), as in mass concrete and sub floors, sub base, hard standing, manholes, drain, concrete surfaces finished even & rough to receive topping floor finish/layer all as specified and directed.

Material and labour for 75 mm thick PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection, laid in panels, concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

Material and labour for 100mm thick cement concrete 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in hardstanding, floor surface finished even and smooth without using extra cement including necessary form wok complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc or laid dry and pointed all as specified and directed.

Material and labour for 60mm thick machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-35 grade, with grey cement and pigment, laid in floor/ path/ hardstandings in any pattern as approved, laid over sand cushion and interstices filled with sand using plate vibrator complete all as specified and directed. Note: Sand for sand cushioning shall be measured and paid for separately.

Material and labour for 80mm thick machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-40 grade, with grey cement and pigment, laid in floor/ path/ hardstandings in any pattern as approved, laid over sand cushion and interstices filled with sand using plate vibrator complete all as specified and directed. Note: Sand for sand cushioning shall be measured and paid for separately.

Material and labour for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

Dismantling, floor hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish outside defence land complete all as specified and as directed.

Material and labour for 75mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate), as in sub floors, sub base, hard standing, manholes, drain, concrete surfaces finished even & rough to receive topping floor finish/layer all as specified and directed.

Material and labour for 25mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate), as in leveling concrete in floor finished concrete surface even & smooth without using extra cement complete all as specified and directed.

Material and labour for hard core of broken stone or boulders gauge not exceeding 63mm deposited, spread and leveled in layers not exc.15 cms thick, each layer watered and rammed to a true surfaces complete all as specified and as directed.

Material and labour for chequered cement concrete coloured tiles 20cm x 20cm x 25mm thick, with grey cement and pigment, jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Supply and fixing in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Material and labour for preparation of old surface of kerb stone, brick, stone, concrete or plastered surfaces and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge.

Material and labour for preparation of old decorated surface of walls and applying one coat of exterior emulsion paint as per manufacturer's instructions complete all as specified and as directed.

PAUL CONSTRUCTION CO.