Construction of Compound Wall and Additional works at New Bus stand SF.No.46/1 - 46/2 in Moranapalli at Hosur Corporation

Earth work excavating and depositing on bank (for Narrow foundaion) with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders inclusive of shoring, shuttering and bailing out water wherever necessary complete as per standard specification (0 to 2m depth)

For Plinth beam excavation

For storm water drainage excavation

Refilling with excavated soil (other than sand) in layers of 15cm thick well rammed & compacted including cleaning and levelling the site etc, complete as per standard specification

Plain cement concrete 1:4:8 mix (One cement four M.Sand and eight aggregate) using 40mm size ISS gauge HBBG metal including mixing, laying, consolidating, curing, cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Plain cement concrete 1:3:6 mix (One cement three M.Sand and six aggregate) using 20mm size ISS gauge HBBG metal including mixing, laying, consolidating, curing, cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Providing and laying in position Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 350Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10-12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc. complete complying with standard specification and as directed by the departmental officers. The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. No separate payment will be made by the Department for the excess usage of materials - For footings, plinth beams, RCC walls, Columns, Beams and Slabs For Upto 1.5m depth (Upto plinth)

For 1.5m to 4.5m depth (below plinth)

For Ground Floor (Upto Roof)

For First Floor (Upto Roof)

For Terrace Floor (Upto Roof)

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. Payment for centering shall be given after the concrete is laid.

For Drainage wall shuttering Above 1m upto 1.8m Height

Centering for soffits of RCC slabs of plane surface like lintels, beams etc. including strutting 3.3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c) and supported dy casurina props of 10cm to 13cm dia. (spaced of 75cm C/C) complying with standard specification and directed. For plane surfaces such as RCC floor slab, roof slab, beams, lintels, landing slab, waist slab, portico slabs and beams etc. (Upto 3.3M height)

For plane surfaces such as RCC floor slab, roof slab, beams, lintels, landing slab, waist slab, portico slabs and beams etc. (From 3.3M to 4.3M height)

For plane surfaces such as RCC floor slab, roof slab, beams, lintels, landing slab, waist slab, portico slabs and beams etc. (strutting at 5.2m height)

For plane surfaces such as RCC floor slab, roof slab, beams, lintels, landing slab, waist slab, portico slabs and beams etc. (strutting at 7.05m height)

For plane surfaces such as RCC wall, side slabs of boxing, vertical drops, vertical walls etc. (Upto 3.3m height)

For plane surfaces such as Rectangular or square RCC columns etc. (upto 3.3m height)

For plane surfaces such as Rectangular or square RCC columns etc. (3.3-4.3m height)

For plane surfaces such as Rectangular or square RCC columns etc. (4.3-5.3m height)

Supplying and erecting centering For Curved surfaces such as Circular RCC columns. ( 4.3m to 5.3 height)

Supplying and erecting centering For Curved surfaces such as Circular RCC columns. ( 5.3m to 6.3 height)

Supplying and erecting centering For Curved surfaces such as Circular RCC columns. ( 6.3m to 7.3 height)

For plane surfaces in samll quantities such as sunshades etc. (Upto 3.3m strutting height)

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel,binding wire, labour , machinerys & conveyance in all floors.

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., the rate is inclusive of all labour,material, machinery and conveyance complete complying with standard specification Ground Floor lvl (Upto Roof)

First Floor lvl (Upto Roof)

Terrace Floor lvl (Upto Roof)

Brick Partition Walls using II class ground moulded chamber bricks of size 9"X43/8"X 23/4" in C.M 1:3 (One part of Cement and Three part of Crushed Stone Sand (M- Sand)) using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., the rate is inclusive of all labour,material, machinery and conveyance complete complying with standard specification ( At First Floor lvl )

Plastering for Internal / External ceiling & RC surface with cement mortar 1:3 (1 Cement : 3 P sand), 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc. complete as per standard specifications.

Plastering for Internal wall surface with cement mortar 1:5 (1 Cement : 5 P sand), 12mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc. complete as per standard specifications.

Plastering for External wall surface with cement mortar 1:5 (One Cement and five P sand), 12 mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used in all floors including cost and conveyance of all materilas to site and labour charges etc. complete as per standard specifications.

Plastering for RC wall surface with cement mortar 1:3 (One Cement and three P sand), 10 mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used in all floors including cost and conveyance of all materilas to site and labour charges etc. complete as per standard specifications - OHT / UG sump wall

Weathering course with broken brick jelly 20mm size in pure slaked lime (no sand to be used) over RCC roof slab the proportion of broken brick jelly to lime being 32:12.5 well beaten with wooden beaters giving required slopes and thickness including cost and conveyance of all materilas to site and labour charges etc,. complete as per standard specifications

Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed.Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and inclusive of cost of materials and labour, etc. complete.

Painting two coats of newly plastered Ceiling surface with ready mixed Cement paint of first quality and of approved colour over a priming coat in all floors including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification.

Internal wall surface Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat in all floors including thorough scrapping, clean removal of dirt, etc. complete and including necessary plaster of paris, putty, wherever required etc. complete as per standard specification.

External wall surface Painting two coats with ready mixed Exterior Emulsion Paint approved quality and colour over a priming coat in all floors including thorough scrapping, clean removal of dirt etc. complete and including necessary plaster of paris, putty, wherever required etc. complete as per standard specification.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc. complete, in all floors.

Applying primer over the new wood works of approved quality and colour including the cost all materials etc.,complete, in all floors.

Painting with Ready Mixed Enamel Paint over the new wood works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Flooring and skirting with double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three P sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position including cost and conveyance of all materilas to site and labour charges, machinery etc as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Flooring with design Anti skid ceramic tiles (colour and shade as directed by the departmental officer) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three M sand) 20mm thick laid in-situ and pointed with same coloured cement,neatly finishing including cost and conveyance of all materilas to site and labour charges, machinery etc as per standard specifications

Dadooing walls with Glazed tiles (colour and shade as directed by the departmental officer) of sizes 300mm X200mm X 6mm size of approved make and quality and colour, Set in cement mortar 1:2 (one cement and two M sand), over 10 mm base layer plastering and pointing with white cement neatly finishing including cost and conveyance of all materilas to site and labour charges, machinery etc as per standard specifications

Supplying and laying in flooring with fully fine flamed Steel Grey colour Granite stone of 16-18mm thick (average) of 1200 X 600 in size laid over base layer of cement mortar 1:3 (one cement and three M sand) - 20 mm thick in all floors and applying cement slurry & pointed with white cement and colour pigments to the colour of stones and polished neatly including cost and conveyance of all materilas to site and labour charges, machinery etc as per standard specifications

Supplying and laying in Column/wall cladding with fully fine Polished Steel Grey colour Granite stone of 16-18mm thick (average) of 1200 X 600 in size laid over base layer of cement mortar 1:2 (one cement and three M sand) - 12 mm thick in all floors and applying cement slurry & pointed with white cement and colour pigments to the colour of stones and polished neatly & joints nosing including cost and conveyance of all materilas to site and labour charges, machinery etc as per standard specifications

Supplying and laying in Granite counter slab with fully fine Polished Steel Grey colour Granite stone of 16-18mm thick (average) of 1200 X 600 in size laid over base layer of cement mortar 1:3 (one cement and three M sand) - 20 mm thick in all floors and applying cement slurry &pointed with white cement and colour pigments to the colour of stones and polished neatly including cost of cutting for sink & conveyance of all materilas to site and labour charges, machinery etc as per standard specifications

Supply and fixing Urinal partition with marble stone size of 610 x 1220 mm ,18/20mm thick in all floors including cost of clamp with bolds & nuts, cutting, fixing, polising, edge nozing and all labour charges, material etc as per standard specifications

Supplying and laying in flooring with super fine Raw Silk Granite stone of 18-20mm thick (average) of laid over base layer of cement mortar 1:3 (one cement and three M sand) - 20 mm thick and applying cement slurry & pointed with white cement and colour pigments to the colour of stones and polished neatly including cost and conveyance of all materilas to site and labour charges, machinery etc as per standard specifications

Granite Nosing for Steps/ Platform of full round with smooth finishing including cost of labour, machinery etc. complete - Single Nosing

Granite Nosing for Steps/ Platform of full round with smooth finishing including cost of labour, machinery etc. complete - Double Nosing

Dadooing walls in elevation with Granite tiles 600 x 300 x 10mm thick of approved make and quality and colour, Set in cement mortar 1:2 (one cement and two M sand), over 10 mm base layer plastering and pointing with colour cement neatly finishing including cost and conveyance of all materilas to site and labour charges, machinery, Scaffolding etc as per standard specifications

Providing granolithic floor finish of with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) - 50mm thick

Supply and Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement and three M sand), 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing , cost and conveyance of all materilas to site and labour charges etc as per standard specifications

Supplying and fixing in position of Country wood (Pillamarudu) frames for doors below 4m in length, wrought and put up in position by using 200mm length hold fast fixing in RCC/ masonry wall finishing neatly including labour ,material & conveyance etc. complete.

Supplying & fixing Solid Core Flush shutters in all floors with commercial ply on bothside 35mm thick with teakwook lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive of three coats of best quality varnish including cost of fittings, such as 300 mm tower bolt 2 nos., 300mm Aldrop 1 No. Alu handle ornamental type 2 Nos. and 1 No. Door stopper and 4nos of 125 x 30mm hinges including material wastage, conveyance and labour charge etc. complete.

Manufacturing supplying and fixing of MS Door made out of 50 x 50 x 6 mm M.S angle for outer frame,35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets (18 G) with 5Nos, of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers.

Supply and fixing of FRP door shutter with FRP door frames made out of FRP sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS angle/ Flats, Cost of holdfasts and slid core FRP shutter panel of 5mm thick and hollow core frames of 3mm wall thickness for styles and rails etc. of sizes specified by Engineers.

Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic fil thickness of not less than 15 Microns (Fifteen) for all sections.All the materials should be got approved by the Engineer - In -charge before fixing as directed.

UPVC Window - Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work.

UPVC Ventilator - Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supply and fixing of M.S Grills with Doors and Windows, ventilators with one coat of red oxide primer including all costs such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc. complete as per standard specification.

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating as per design given by the departmental officers etc, complete as per standard specification

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia. 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia. Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia. intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges etc. complete.

Structural Glazing: Providing and fixing structural glazing fabricated from roll formed sections made of galvanized steel colour coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 grams / sqm.) with total coated thickness of 0.72mm. The glass holding section made of 304 grade SS of 0.6mm thick. Galvanized steel sections are to be used as stiffeners inside the colour coated steel / powder coated sections as per the design requirement. Design calculations are made to suit wind pressures as given in IS 875. Paint specifications: Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick. Dimensions: The section should be of 37 x 53mm for frame vertical, 37 x 53mm for frame horizontal section and section for reinforcement should be of 31 x 55mm. glass holding section should be of 37 x 37mm for top and bottom grids in between should be of 37 x 18mm. Accessories: Brackets made of CRCA powder coated / electro plated should be used to fix vertical at top and bottom and vertical to slab as per site requirement. Polyurethane brackets should be used to connect horizontal section to vertical sections. Silicone: Natural cure, with good UV resistance to be used. The above frame should be fixed to brick / concrete masonry by using nylon self–expanding cap and driving MS electro plated 80mm long screws into the caps through frames. Glass: 5mm reflective Saint Gobain OR equivalent.

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps,fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer

Supplying and laying Tactile Paver Type of New Tek BT Yellow Colour Ceramic Tiles of Size 305*305*15mm for vision impairment person over a base layer of cement mortar 1:3 (one cement and three M sand ) 20mm thick laid in-situ and pointed with same coloured cement including cost and conveyance of all materilas to site and labour charges, machinery etc as per standard specifications

Providing and laying with two-part elastomeric fuel resistance, UV resistant, Non-toxic once cured,resistant to flame, pouring grade liquid polysulphide sealant to fill the expansion joint, Control joints in parking area, construction joint in airport runway, Tanks, bridges & concrete roads. The sealant shall have Elongation min. 450% confirms to ASTM D 412, movement accommodation for butt joint 25% & for lap joints 50%. The sealant should meets the requirement of BS 5212, BS 4254 & ISO:11600. Ensure that apply a coat of polysulphide sealant primer @0.5L/m2 to get better adhesion on prepared surface before placing the sealant. The finished cost including surface preparation,filling foam backer rod, applying masking tape on both sides of the joint & polysulphide sealant filling on gap completely as per specification. 20mm width

Plain Cement Concrete M40 grade (design mix) using 20mm ISS size HBG metal finished by trowel including cost and conveyance of all materials from approved quarry to work site including cost of cement which has to be procured by the contractor including cost and labour charges for mixing the concrete, transporting, laying, compacting, curing with all leads for soft portable water, working in all depths including hire, running and fuel charges for all tools and plants employed including as per MORTH Rev. V Specification No. 1000,1500,1700,2200. No separate payment will be made by the Department for the excess usage of materials - Pavement quality concrete (PQC)

Cutting transverse Contraction joint 3 to 4mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 48 hrs of casting of bay / slab etc. and fixing joint filler with sealent in expansion joints including making the joints & dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge.

Providing cut stone kerb stone of size 60cm x 10cm x 37.5cm with all faces neatly dressed oneline dressing with chambered edge on the road side including excavation in all soils for 10cm width and 22.5cm depth and fixing the stone in position including grouting the joints with cement mortar 1:3 mix etc. complete

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ Cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10-12mm machine crushed stone jelly and with about (4.79cum), 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc. complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. (No separate payment will be made by the Department for the excess usage of materials) - For Footings, walls,slab

Supplying and Fixing GI pipe 32 mm dia (B class) including cutting and fixing in to kerb wall for30 cm depth including fixing weld mesh 7.5 cm x 5cm 10 gauge and fixing welding with MS angle 35 x 35 x 6mm allround and with MS Flat 45 x 6mm at middle including Conveyance etc ., Complete

Hard rock (Requiring Blasting) Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in hard rock requiring blasting and stacking. Footing Excavation(2 to 3m height)

Footing Excavation(3 to 4m height)

Earth work excavation and depositing on bank in hard soil / murrum not under water with initial lead of 10 m and lift of 2 M in narrow trenches having bed width 1.25m & below for laying of pipes for water supply and sewerage works in the following type of soils as directed by Departmental officers.

Supplying and fixing in position best quality PVC-U soil/ waste pipes of various sizes having ISI mark and providing leakproof joints including fixing to the wall with PVC/ MS clamps etc. and making connection to all sanitary fittings, dismandling masonry / RCC works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications. 90mm dia pipe

110mm dia pipe

160mm dia pipe

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. 20mm Gun metal Gate Valve

25mm Gun metal Gate Valve

32mm Gun metal Gate Valve

40mm Gun metal Gate Valve

50mm Gun metal Gate Valve

65mm Gun metal Gate Valve

80mm Gun metal Gate Valve

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) SD Tap

Piller Tap

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. 15mm dia

20mm dia

25mm dia

32mm dia

40mm dia

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. 32mm dia

40mm dia

50mm dia

63mm dia

90mm dia

100mm dia

Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements COUPLER 15 mm Dia

20 mm Dia

25 mm Dia

32 mm Dia

40 mm Dia

50 mm Dia

ELBOW 15 mm Dia

20 mm Dia

25 mm Dia

32 mm Dia

40 mm Dia

50 mm Dia

BEND 15 mm Dia

20 mm Dia

25 mm Dia

32 mm Dia

40 mm Dia

50 mm Dia

TEE 15 mm Dia

20 mm Dia

25 mm Dia

32 mm Dia

40 mm Dia

50 mm Dia

END CAP 15 mm Dia

20 mm Dia

25 mm Dia

32 mm Dia

40 mm Dia

50 mm Dia

REDUCER 20 mm x 15 mm

25 mm x 20 mm

32 mm x 25 mm

40 mm x 32 mm

50 mm x 40 mm

REDUCER TEE 20 mm x 15 mm

25 mm x 20 mm

32 mm x 25 mm

40 mm x 32 mm

50 mm x 40 mm

REDUCER ELBOW 20 mm x 15 mm

25 mm x 20 mm

32 mm x 25 mm

40 mm x 32 mm

50 mm x 40 mm

JET NIPPLE 25 mm Dia

32 mm Dia

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). PVC ELBOW 160mm dia

110mm dia

90mm dia

PVC ELBOW WITH DOOR 160mm dia

110mm dia

90mm dia

PVC TEE 160mm dia

110mm dia

90mm dia

PVC TEE WITH SINGLE DOOR 160mm dia

110mm dia

90mm dia

PVC TEE WITH DOUBLE DOOR 160mm dia

110mm dia

90mm dia

PVC BEND 160mm dia

110mm dia

90mm dia

PVC "Y" 160mm dia

110mm dia

90mm dia

PVC "Y" WITH SINGLE DOOR 160mm dia

110mm dia

90mm dia

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

C.P.Shower rose

Stop cock

Supplying and fixing in position C.P. Towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plug and C.P. Screws etc. complete complying with standard specification.

Supplying and fixing in position C.P. Soap tray of size 150 x 150mm including cost of teak wood plug and C.P. screws. etc. complete complying with standard specification.

Supplying and fixing in position Indian make bewelled edge mirror of size 600 x 450mm quality including cost of Rawal plugs, brass screws. etc. complying with standard specification.

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm White/Colour glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with Crushed stone sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two Crushed stone sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing,spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition,etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of Crushed stone sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three Crushed stone sand ) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Supplying and fixing in position 150 x 100mm "P" or "S" stoneware gully trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three Crushed stone sand and Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works.

Providing and laying non-pressure NP3 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints, conveyance to site,excavation,tools,plants & labour charge etc. complete. 300mm dia pipe

Supply and Delivery of DWC Structured Wall Polyethylene Piping Systems (Pipe with online/ offline coupler and elastomeric sealing ring) with required specials non-smooth external annular corrugated and smooth internal surface (Double wall) (SN 8 Class) for non-pressure underground sewerage, drainage application generally as per IS-16098 (Part-2) type B. - 250mm ID

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 100mm dia

80mm dia

Providing and fixing in position CP two way bib cock with health Faucet 15 mm dia for european water closet including necessary fittings and specials etc., complete

Fabrication, supply, delivery and fixing of outside MS Ladder of 45cm clear wide made out of 50 mm x 50mm x 6mm MS angle for both sides and for steps at 30cm C/C welded jointed etc ., for I staging from GL to 1st level brace (weight 4.5kg/m) IInd and IIIrd staging upto floor slab and IVth staging from floor slab to roof top. Supply, delivery and fixing of 32 mm GI pipes medium for hand rails from I stage to IVth stage. RCC M30 Grade mix for Landing slab 5 nos. at Ground Level- 1No. and above Ground Level - 4Nos. Supply and fixing of 32mm GI pipe medium for hand rails for the Landing slab. Supplying and fixing of MS Base plate of 100mm X 100mm X 6mm thick for fixing Anchore fastener bolt for fixing of hand rails at Landing slab and MS Ladder providing locking arrangements with two coats of approved enamel paint over one coat of red oxide paint as per approved Type Design and as directed by TWAD board officers.- 20KL- 7.5m height

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Size - 600x450x200 mm.

Providing of PVC Mould CI steps for sump/STP & chambers fixing with RC wall or brick wall with neat finishing,complete as per standard specification.

Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter con forming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. This rate is inclusive of excavation, filling, plastering, PVC mould CI step etc.,

Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m,With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :1.68 m deep with SFRC Cover and frame (heavy duty HD 20 grade designation) 560 mm internal diameter conform ing to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 ce ment : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. This rate is inclusive of excavation, filling, plastering, PVC mould CI step etc.,

Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 2.30 m deep with SFRC Cover and frame (heavy duty HD 20 grade designation) 560 mm internal diameter conform ing to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 ce ment : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5m. This rate is inclusive of excavation, filling, plastering, PVC mould CI step etc.,

Supplying , Installing, testing and commissioning of conference type public address system Chairman Unit

Delegate Unit

Conference controller

P.A Mixer amplifier 240W

Wall speaker 30W

Ceiling speaker 20W

Cordless Mic UHF

8 Pin Conference Mic Socket with Modular Box and Front plate

2 Core 1.5 sq.mm Shielded Copper Speaker Wire

8 Core 1.5 sq.mm PVC Copper Conference Ccable

Supply and fixing of Water CO2 Stored Pressure Type 9 litres capacity Fire Extinguisher as per new IS 15683 complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, wall mounting bracket, safety clip, etc., as directed by the Departmental Officers.

Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc. including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc. complete as per standard specification and as directed by the Departmental Officers (Make: EXCELLENT / SAFETY FIRST / EQUIVALENT)

Supply and kept in position of Trolley Mounted Water CO2 Stored Pressure Type 50 litres capacity Fire Extinguisher as per IS:13385, complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, mounting trolley with moving wheel, safety clip etc. including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc. complete as per standard specification and as directed by the Departmental Officers (Make: EXCELLENT / SAFETYFIRST / EQUIVALENT).

Supply and kept in position of Trolley Mounted Type 22.5 kg. Carbon-di-Oxide Fire Extinguisher as per IS15683, complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, mounting trolley with moving wheel, safety clip, etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Lower End

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch concealed in suitable MS box in flush with wall painting

Supply and fixing of 5A / 15A 3 pin combined flush type wall socket with 15A flush type switch concealed in suitable MS box flush with wall painting

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall painting & earth connection (For AC Plug)

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion.

Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion.

Supply and fixing of 7 segment 6 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following on wall with earth connection only.

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) 1 No. 32A DP MCB as incoming and 6 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark Lower end (like standard make)

Supply and fixing of 15W round type LED Fitting with driver including cost of all materials , labour, lead lift etc., complete.

Supplying and fixing of 18W 4 feet LED Fitting with LED including cost of all materials , labour, lead lift etc., complete.

Supply and fixing of LED Flood Light 100W with Integrated Driver including cost of all materials , labour, lead lift etc., complete.

Supply and clamping of 2 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps including cost of all materials , labour, lead lift etc., complete.

Supply and run of 4 x 16 sq.mm. PVC armoured LTUG cable on post or on wall with MS clamps including cost of all materials , labour, lead lift etc., complete.

Supply and run of 3.5 x 95 sq.mm. PVC armoured LTUG cable on post or on wall with MS clamps including cost of all materials , labour, lead lift etc., complete.

Supply and run of 3.5 x 185sq.mm.PVC armoured LTUG cable on post or on wall with MS clamps including cost of all materials , labour, lead lift etc., complete.

Supply and run of 3.5 x 240sq.mm. PVC armoured LTUG cable on post or on wall with MS clamps including cost of all materials , labour, lead lift etc., complete.

Supply and fixing of brass cable gland for 2 x10 sq.mm. PVC LTUG armoured cable with earth connection including clamp,bolt and nut etc

Supply and providing cable end termination of 4 x10 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and providing cable end termination of 4 x 16 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and providing cable end termination of 3-1/2 x 35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and providing cable end termination of 3-1/2 x 95 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and providing cable end termination of 3-1/2 x 185 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and providing cable end termination of 3-1/2 x 240 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply & Installation of GI Hot dip cable tray in size of Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 2.0 mm thickness

Supply & Installation of Main LT Panel Outdoor enclosure of sheet steel as per CPWD & TNEB specifications with 4No 800A 4P MCCB, 1n O 800A 4P BUSCUPLER , Microprocessor LSIG releases, ELR with CBCT, 2O/C+1E/F RELAY, Master trip & trip circuit supervision relay, RYB phase indication lamps, MFM Meter with RS 485, kWH Master Meter with CT & PTs, SPD with MPCB, Set of 400A TPNE ALuminium Busbar with Color coded sleeves, Outgoing 10Nos, Energy Meter 3Phase with Ct/Pts, MCCB TPN 160A-400A 5Nos, Cable alley with all accessories. AS per IEC 60439.

Supply & Installation of shop metering Panel-HOSUR bus stand building Indoor enclosure of sheet steel as per CPWD & TNEB specifications with 1No 200A 4P MCCB Microprocessor LSIG releases, ELR with CBCT, RYB phase indication lamps, MFM Meter with RS 485, kWH Master Meter with CT & PTs, SPD with MPCB, Set of 200A TPNE ALuminium Busbar with Color coded sleeves, Outgoing Energy Meter 3Phase MCB & ELCB SPN 63A 2Nos , MCB & ELCB SPN 10-32A 30Nos, Energy Meter 1Phase, MCB & ELCB SPN 10-32A 3 Nos,Cable alley with all accessories. AS per IEC 60439.

Supply & Installation of shop metering Panel-HOSUR bus stand building Indoor enclosure of sheet steel as per CPWD & TNEB specifications with 1No 200A 4P MCCB Microprocessor LSIG releases, ELR with CBCT, RYB phase indication lamps, MFM Meter with RS 485, kWH Master Meter with CT & PTs, SPD with MPCB, Set of 200A TPNE ALuminium Busbar with Color coded sleeves, Outgoing Energy Meter 3Phase MCB & ELCB SPN 63A 2Nos , MCB & ELCB SPN 10-32A 30Nos, Energy Meter 1Phase, MCB & ELCB SPN 10-32A 3 Nos,Cable alley with all accessories. AS per IEC 60439.

Supply & Installation of Sub LT Panel-ACCP Indoor enclosure of sheet steel as per CPWD & TNEB specifications with 1No 400A TPN MCCB Microprocessor LSIG releases, ELR with CBCT, APFCR relay, RYB phase indication lamps, MFM Meter with RS 485, kWH Master Meter with CT & PTs, SPD with MPCB, Set of 400A TPNE ALuminium Busbar with Color coded sleeves, Outgoing Total 200kVAR capacity with 8Stage / set of Capacitor banks with contactors, MCB/MCCB, on/off PBs, accessories etc. Cable alley with all accessories. AS per IEC 60439.

Supply & Installation of UTILTIY PANELl HOSUR bus stand building of sheet steel as per CPWD & TNEB specifications with 1No 800A 4P MCCB, 1n O 400A 4P ATS , Microprocessor LSIG releases, ELR with CBCT, 2O/C+1E/F RELAY, Master trip & trip circuit supervision relay, RYB phase indication lamps, MFM Meter with RS 485, kWH Master Meter with CT & PTs, SPD with MPCB, Set of 400A TPNE ALuminium Busbar with Color coded sleeves, Outgoing 10Nos, Energy Meter 3Phase with Ct/Pts, MCCB TPN 160A-400A 5Nos, Cable alley with all accessories. AS per IEC 60439

Supply & Installation of EV Panel-HOSUR bus stand building Indoor enclosure of sheet steel as per CPWD & TNEB specifications with 1No 63A TPN MCB Microprocessor LSIG releases, ELR with CBCT, RYB phase indication lamps,CT & PTs, Voltmeter with VAF METER, Set of 63A TPNE ALuminium Busbar with Color coded sleeves, Outgoing MCB & ELCB 32A DP 8Nos 1 Nos,Cable alley with all accessories. AS per IEC 60439.

Supply and insallation Cabinet Type Class 1 and 2 Combined Model SPD to arrest surges and overvoltages in the power line due to lighning switching action etc. they must be installed in the incoming MCC panel / DB of the respective buling in parallel to the power circuit.Model: PSV4-12.5/400TT (3 phase power network)

Supply and laying of 10 x 2.5Sq.mm copper armoured cable for electrical motor & control panels etc..all incidental charges necssary scaffolding and re-doing the dismanteled portion to its orginal condition wherever found necssary etc.. Complete as per standard specification and as directed by the departmental officers. Make: POLYCAB / PARACON / FINOLEX / EQIVALENT

Earthing as per the ISI specification with an earth electrode of 2.10 metre copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply, installation, testing and commissioning of earth strip as described in specifications & drawing, complete in all respects. 25 x 3 mm GI. strip

25 x 6 mm GI. strip

50 x 6 mm GI strip

SUPPLY AND INSTALLATION OF SINGLE & DOUBLE ARM POLE WITH LIGHT FITTINGS TYPE - 1: Carriageway Streetlights Supply and Installation of 150W LED street light with High efficacy street lights with Color Temperature of 5700K and with (0-10V) dimmable driver and 5-pin NEMA Socket. CRI of 70. Streetlight luminaire shall have die cast Aluminum housing frame and toughened glass. Internal Surge Arrestor of 440V, 10kV. 5-pin NEMA receptacle. THD shall be < 10%. Driving current shall be <= 700mA

Supply and laying of 3 core 1.5sqmm power cable including labour charges complete as per standard specification

Supply and fixing 9M height Single arm Conical Pole ( class B) made of GI with top 76.10mm dia. and bottom 114.30mm dia. & 2M Height 32mm dia GI pipe (Class B) Altair Design bracket complete with suitable MS clamp. The pole to be provided with a 300x300x6mm steel base plate. This mounting steel base plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed RCC foundation. Entire pole & bracket shall be made to provide pleasing aesthetics as approved by Concerned Engineer in-charge. After Fabrication, Entire Pole is hot dip galvanized (60 microns Minimum) for the effective corrosion resistance . The hot dip Galvanised pole should be provided with an inbuilt junction box to fix 32A connectors and 6A MCB, at the bottom - the inbuilt box should have a flush door of suitable size. wind pressure calculation as per IS 875(part-3) & structural calculation report as per EN40 should be submitted to verify the pole strength. Pole & it's parts are painted in 3 layer coating(coating thickness-100 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy primer & 3rd final layer with PU paint - Color shall be Metallaic Grey. The rate is including excavation,footing,pedestal etc.

Supply & fixing of 40mm dia GI pipe for street light along with Rcc member/ wall by MS clamb & nuts of suitable size to be used for ensuring firm grouting. Entire pipe shall be made to provide pleasing aesthetics as approved by Concerned Engineer in-charge. After Fabrication, pipe is hot dip galvanized(60 microns Minimum ) for the effective corrosion resistance . it's parts are painted in 3 layer coating(coating thickness-100 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy primer & 3rd final layer with PU paint - Color shall be Metallaic Grey including labour and fixing etc.

CONTROL PANEL FOR OUTDOOR LIGHTING Supply and Installation of Smart Streetlight Feeder Pillar controller with RF based Gateway controller Device capability of scheduling the on/off timings of lighting control switchgears based on preset timings or based on the available annual sun-rise and annual sun-set timings with GPRS/GSM based remote streetlight monitoring system with capacity for self-protection from short-circuit, over voltage and anti-theft alert.floor mounted cubicle type CCMS feeder pillar suitable for 415V, 3phase, 50Hz, 4wire system complete with all accessories and miscellaneous equipment as per specification. The feeder pillar shall be fabricated out of CRCA Metal Sheet with 1.6mm Thickness, powder coated paint & provided with required gasket for dust/ vermin proof with degree of protection IP55 and locking arrangement and shall consist of following - Incomer MCCB, 4 pole, 32/63Amp 16kA, 1 set of 415V, 50 Hz TPN Busbar (Cu), 4 nos 32/63A TPN MCB for three Output and 1 Nos for Spate. Energy meter ISI marked, IS:13779 with RS-232 comm, Latching relay with rating of 80A/phase, Timer apart from all the smart control components like Gateway controller, Power Supply Unit for the Gateway unit with 440V withstand voltage.

Supply & Installation of Sub LT Panel-EXTERNAL PANEL enclosure of sheet steel as per CPWD & TNEB specifications with 1No 160A TPN MCCB Microprocessor LSIG releases, ELR with CBCT, RYB phase indication lamps, MFM Meter with RS 485, kWH Master Meter with CT & PTs, SPD with MPCB, Set of 160A TPNE ALuminium Busbar with Color coded sleeves, Outgoing 6Nos, Energy Meter 3Phase with Ct/Pts, MCCB TPN 32A-100A 6Nos, 3Nos, Energy Meter 1Phase, MCB & ELCB SPN 10-32A 3 Nos, Cable alley with all accessories. AS per IEC 60439. INCOMER: 1 No 160A TPN MCCB OUTGOING: 1No 32A TP MCB 6 No 10/32A SP MCB 6 No 63A TP MCB

Supply & Installation of LT KIOSK -1-2 11kV, 25kA, 800A (MCCB ),

LT CABLE Supply and Laying of 3 1/2 x 35 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 3 1/2 x 95 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply & laying of 240 sq.mm. 3 core HT XLPE 11KV (E) UG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

CEIG DRAWING: Charges for Preparation of drawing for schematic single line diagram, physical layout & Site plan of Electrical arrangements for Rule63 inspection as per IE Rules and professional and miscellaneous charges for preparation of completion report and obtaining safety certificate from Electrical Inspectorate etc: complete .

Supply & Installation of 11 KV, 25 KA, 630 A, HT Outdoor Single Panel Vaccum Circuit Breaker complete as per specification

Supply & Installation of 11 KV, 25 KA, 630 A, METERING CUBICAL complete as per specification

Supply & Installation of 11 KV, 25 KA, 630 A, HT Indoor Three Panel Ring Main Gear complete as per specification

Chain link fencing with gate including the TNEB 2 poles Spreading of materials as per CEIG requirements

Supply & Providing of AC Chargeable Emergency Lamp 2 x 11W PL Lamp with all connected accessories

Supply & Installation of 2m x 1m Rubbermat suitable for 11kv installation confirming to IS (1 set = 5 nos )

Supply & Providing of First Aid Box complete with all First Aid Medicines

Supply & Providing of Shock Treatment Chart fixed in glass frame

Supply & Providing of 4Nos. Fire Buckets made out of 40 X 40 X 6mm MS angle

Supply & Providing of Hand Gloves

Supply & Providing of Danger Board as required by the Electrical Authorities

Supply & Providing of Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms

Supply & Providing of Earth Discharge Rod

SS Associates (BID ID -1183384)

CMK Projects Private Ltd., (BID ID -1182519)

BHAKIYA ASSOCIATES (BID ID -1183317)