Repair and Renovation of Temple

Amount

Dismantling of existing cudapah stone flooring including all labour charges, hire for all tools and plants for employed, scaffolding charges handling charges hoisting and stacking them in the places as shown by the departmental officers.

Labour charges for dimantling the existing cut stone flooring including all labour charges, hire for all tools and plants for employed, scaffolding charges handling charges hoisting and stacking them in the places shown by the departmental officers.

Relaying the old flooring stone with Pointing with Lime mortar 1:1.5 including all labour charges, hire for all tools and plants for employed, scaffolding charges handling charges hoisting and dressing wherever necessary etc as directed by the departmental officers.

Earth work excavation for foundation in all classes of soils and sub soils and todepth as may be directed except in hard rock, requiring blasting, including initial leads and lifts and re-filling the sides of foundation, with excavated earth in 150mm layers well watered rammed and consolidated, including depositing surplus earth clearing and levelling the site, shoring shuttering baling out water wherever necessary etc., complete complying with standard specification.

Supplying and filling in foundation, basement, with filling M-sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification

Flooring with new cut stone slab of size 600mmX600mm and other sizes suitable for site requirement not less than 100mm thick with machine cut edges and top surface dressed as directed by the departmental officers including cost and conveyance of materials to site and lobour charges for paving and Pointing With Lime Mortor1:1.5 etc complete as directed by the departmental officers New cut stone flooring

Flooring with old cut stone slab of size 600mmX600mm and other sizes suitable for site requirement not less than 100mm thick with machine cut edges and top surface dresseing wherever necessary including lifting, hoisting, refixing and pointing with Lime Mortor1:1.5 etc complete as directed by the departmental officers old cut stone flooring work.

Dismantling clearing away the existing damaged weathering course and pressed tiles and removing all debries from the site of work and depositing the same in the place as shown by the departmental officers.

Weathering course concrete with broken jelly 20mm size and pure unslaked lime over RCC roof slab, the proportion being 32:12.5 for required depth for giving required slope and thickness of roof on required, well beaten with wooden beater using lime Jaggery water constantly wetted etc, complete complying with standard specifications.

Fininshing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in lime mortar 1:2 (One cement and two sand) 20mm thick mixed with water proofing compound conforming to ISS at 2% by weight of lime used and the joints pointed neatly to full depth of tiles with the same mortar mixed with red oxide and water proofing compound including curing etc, complete complying with standard specification

Scaffolding charges for Vimanams and gopurams with casurina posts coconut or plam trees wherever necessary for main, form work and providing ladder arrangements, country wood plank for working, inspection etc, complete hire charges only for erection, maintainance and removing the same on completion of the work.

Swamy Sannathi Vimanam upto 50 feet height

Kasi viswanathar Sannathi Vimanam upto 15 feet height

Scraping the decayed lime plaster from the surface of Vimanams and Gopurams, carefully including isolated bricks or brickwork without damaging the vari vargams, racking out the joints, cleaning the surface with water. Including all working in heights, hire charges for special tools, brushes complete superficial are including all folds.

Providing new Sudai Vigrahams in the Vimanams and Rajagopurams with copper rod reinforcement of suitable dia with binding wires wherever necessary shaping the core with broken bricks set in Combination mortar 1:1.5 with 20% of cement finishing the same with Combination mortar 1:1.5 bringing to the correct shape (lakshana) in conformity with silpa sastra inclusive of special ornaments weapons, peedam etc complete and providing lime mortar nayam theervai wherever necessary inclusive of cost and conveyance of all meterials. Such as lime, broken bricks, sand GI rods binding wire all labour for working heights, curing lifting of all materials etc complete. Including painting water based emulsion paint two coats over a primary coat.

Sudhai size above 1'0" upto 2'6"

Painting with multicolour (Panchavarnam) good water based exterior emulsion paints complete for the Vimanams/Gopurams, including cost and conveyance of all materials, labour charges including Artist painter, working in heights, lifting of materials, cost of brushes etc, complete which including all extra for foldings 100 sft, superficial area. upto 50'ft ht

Scrapping the old plastered surface and repainting two coat with approved water based exterior emulsion over the cement plastered wall surface, ceiling and other new surface over priming coat including clearing preparing the surface curing in all floors including brushes etc., complete as per standard specification.

Pointing the cut stone flooring and masonry work with lime mortar 1:1.5 excluding cost and conveyance of cut stone but including all labour charges scaffolding etc complete with standard specifications. The lime used which is highly iron fortified and suitable for structural and masonry works.

Supplying and fixing teak wood temple type door using best seasoned good quality teak wood including wrought and pur up and including all materials, labour charges for manufacturing and fixing in position including all furniture fittings and making necessary grows in door and frames for housing the door etc complete with standard specifications. Above 7'0" ht

Supplying and fixing teak wood temple type door using best seasoned good quality teak wood including wrought and pur up and including all materials, labour charges for manufacturing and fixing in position including all furniture fittings and making necessary grows in door and frames for housing the door etc complete with standard specifications. Below 7' ht

Supplying and fixing mild steel grill gate, grills for doors and windows welding, grinding and including cost conveyance of all materials and fixing in position including priming coat etc complete with standard specifications.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrated etc, with two coats of best approved first quality and colour of synthetic enamel paint over the existing zinc chromate yellow priming coat in all floors etc, complete complying with standard specification. (The make quality and colour of paint should be got approved by the Executive Engineer before use on works).

Clean removal of lime plaster from the wall surface carefully to any height as directed by the departmental officers.

Plastering with Lime Mortar 1:2, 12mm thick including the cost and conveyance of all materials, labour charges, curing, finishing etc, complete complying with standard specifications. Lime used should highly iror fortified and suitable for structural masonry work.

Clean removal of old paint from the surface of wooden door and Repainting old wood work with two coats of synthetic enamel paint of approved quality and color over one coat of primer in all floors include cost of all materials, brushes scaffolding charges etc, complete complying with standard specifications.

Painting with Manicka pattai with terracotta two coats over priming coat including brush, and all other materials etc. complete complying with standard specfication

Supply and fixing of single box type 1 x 20 W single LED fitting complete with TW round blocks on wall or ceiling with LED tube with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of twin box type 40 W LED batten fitting complete with TW round blocks on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting.

supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 600 mm down rod on the existing fan clamp

Supply and fixing of 300 mm (12") sweep (Heavy duty) AC Exhaust fan complete without provision.

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep light duty AC Exhaust fan

Supply and fixing of 450mm 18" Almonard / Havells (Turbo force) Wall Fan with Pillar Clamp 1½ x ¼ MS flat with bolt and nuts for fixing the Fan on wall with necessary connection.

Supply and fixing of 9W / 15W LED for BH point. (SD 79 FANCY GLASS SHADE)

Supply and fixing of 4" x 4" MS powder coated box with cable gland, ceiling rose and with electrical connections complete.

Supply and fixing of 3 Nos. 5Amps (3 Pin and 2 Pin) combined flush type wall socket with control switches concealed in suitable TW Box covered with Hylem sheet in flush with wall with earth connection (For Computer Plug Socket).

Supply and fixing of 5A / 15 A 3 Pin combined flush type wall socket with 15A flush type switch concealed in suitable MS Box in flush with wall and covered with 3 mm thick hylem sheet.

Supply and fixing of 32A DP MCB in sheet steel enclosure box with electrical connections complete.

Supply and run of 2" x 2" powder coated perforrated tray with cover MS angle with necessary clamping arrangements on the pillars with necessary accessories as directed by the departmental officer.

Supply and fixing of MS clamps of size 2' x 1' on pillar with suitable Bolt / nuts and painting of suitable colour.

Supply and fixing of MS clamps of size 1¼' x 1¼' on pillar with suitable Bolt / nuts and painting of suitable colour.

Supply and fixing of 1 x 30W LED street light fitting complete with 32 mm dia GI pipe (Class'B') with 1 No. 32 mm GI bend complete on the wall with suitable angle iron frame work with concreting and masonary work for fixing the angle iron frame with 1no 6-32A SPMCB in suitable sintex box with PVC unsheathed copper leads MS clarnps and aluminium painting

Supply and fixing of 1 x 48W LED street light fitting complete with 32 mm dia GI pipe (Class'B') with 1 No. 32 mm GI bend complete on the existing post on wall with PVC unsheathed copper leads MS clarnps and aluminium painting

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour

Supply and fixing of 30W LED Focus / Flood light fitting complete on wall or ceiling with suitable MS clamp.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply and fixing of 63A Vertical type 8 way triple pole neutral MCB distribution board in sheet steel enclosure double door of type with metal door with IP42 protection with 63A 4 pole MCB isolator as incoming, 24 nos. 6-32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. (like Legrand make) HIGHER END with ISI make

Supply and fixing of 63A (500V) three phase meter box fabricated with 16 SWG CRCA Sheet comprising of with 3 nos. of 63A fuse units, 1 no. 63A TPN interior switch with HRC fuses, provision for fixing TNEB meter with inter connections and with required accessories on wall complete.With 63A 30MA RCCB

Supply and Laying of 3½ x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 3½ x 25 sq.mm PVC LTUG armoured Alu cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 3½ x 25 sqmm PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3½ x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and clamping of 4 x 10 sq.mm PVC LTUG armoured copper cable in on post or on wall with MS Clamps.

Supply and laying of 4 x 2.5 sq.mm PVC armoured LTUG Cu cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and clamping of 4 x 2.5 sq.mm PVC LTUG armoured copper cable in on post or on wall with MS Clamps.

Supply and clamping of 4 x 1.5 sq.mm PVC LTUG armoured copper cable in on post or on wall with MS Clamps.

Supply and laying of 2 x 4 sq.mm PVC armoured LTUG Cu cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and clamping of 2 x 4 sq.mm PVC LTUG armoured copper cable in on post or on wall with MS Clamps.

Supply and laying of 2 x 1.5 sq.mm PVC armoured LTUG Cu cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.

Supply and clamping of 2 x 1.5 sq.mm PVC LTUG armoured copper cable in on post or on wall with MS Clamps.

Supply, laying and clamping of 32 mm dia GI pipe in existing trench or on wall or on post with necessary MS clamps.

Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work

Supply and run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Sub Total

N.NATARAJAN (BID ID -1312912)