Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.8 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹36.5 L+₹3.9 L (11.8%)Rejected-AOC B 12 VISHAKARMA JYOTI SUBHASH LANE MALAD E MUMBAI 400097 | MUMBAI SUBURBAN | MAHARASHTRA | 400097 | L2 | Rejected-AOC Not accepted | |
| 3 | L3₹37.0 L+₹4.4 L (13.4%)Rejected-AOC 0 FUTANA OLI NEAR KAL BHAIRAV MANDIR KAMPTEE ROAD KAMPTEE NAGPUR MAHARASHTRA 441002 | 441002 | L3 | Rejected-AOC Not accepted | |
| 4 | L4₹37.4 L+₹4.8 L (14.6%)Rejected-AOC | L4 | Rejected-AOC Not accepted | |
| 5 | L5₹39.6 L+₹6.9 L (21.2%)Rejected-AOC SHOP NO 4 SUN STAR CHS LTD PLOT NO 309 SECTOR 21 NERUL EAST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L5 | Rejected-AOC Not accepted |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
15 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer North Mumbai
Garrison Engineer North Mumbai Military Engineer Services Santacruz East, Mumbai 400029
CERTAIN REPAIRS TO ROOF AND OTHER CONNECTED WORKS AT KMC, JUHU AND DEFENCE CIVILIAN MD ACCN UNDER GE NORTH MUMBAI
2023_MES_597047_1
8130/E8
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer North Mumbai
As per tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer North Mumbai
₹80,000
28 Jun 2023
20 May 2023
17 Jun 2023
20 May 2023
15 Jun 2023
31 May 2023
21 May 2023 - 30 May 2023
Amount
Dismantling wrought iron or mild steel work of any description, not otherwise provided for and removing clear off site after credit for the same is recovered by the dept complete all as specified and as directed by Engineer-in-Charge.
Material and labour for rolled mild steel in joist, channel, angle or tee sections, fixed independently, without connecting plates, etc confirming to FE 290 (Gde E-165) complete all as specified and as directed by Engineer-in-Charge.
Excavating in post holes (or similar holes), each not exceeding 0.5 cum, getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and removing surplus soil to a distance not exceeding 50 m and depositing where directed and making good the disturbed surface complete all as specified and as directed by Engineer-in-Charge.
Material and labour for rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, and fastenings and heavy bracket framing, (beam, tee, angle, channels or flat sections) including distance pieces, cleats etc, notching, drilling, fitting, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts) conforming to Fe 410 W Gde E- 250, Quality B complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Steel work in tubular trusses, purlins etc, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St.-240 including all necessary staging, scaffolding, etc as required to work at any height complete all as specified and directed by Engineer- in-Charge.
Dismantling timber in scantling 40 sqcm and over in section in any position in unframed work and removing clear off site after credit for the same is recovered by the dept complete all as specified and as directed by Engineer-in-Charge.
Supply and fix second class hardwood Plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engineer-in-Charge.
Material and labour for cutting holes in brick walls for inserting angle iron trusses/ rafters with depth, of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall, exc one brick but n exc two bricks complete all as specified and as directed by Engineer-in-Charge.
Material and labour for plain cement concrete 1:2:4, type B-1, using 20 mm graded stone aggregate as in bed block of angle iron, swan neck post and coping at security wall including use and waste of formwork for fair finished surfaces complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparing new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints/Nerolac Paints/Berger Paints/Shalimar Paints
Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges and removing clear off site after credit for the same is recovered by the dept complete all as specified and as directed
Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated, steel sheet 0.50mm thick (total thickness including coating) of any colour having tensile strength of 550 MPA as in cladding to wall, roof covering, fixed with self tapping screws including taking down of old unserviceable AC sheet complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / Essar.
Supply and fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick (total thickness including coating) of any colour having tensile strength of 550 MPA with as in roof covering, cladding to wall, fixed with self tapping screws including taking down of old unserviceable wall cladding complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / Essar.
Supply and fix 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap in roof, fixed with L type or J type or cranked hook bolts with washer or as per manufacturer's instruction complete all as specified and as directed by Engineer-in-Charge. Make: Everest Industries Ltd (EVEREST) or equivalent
Material and labour for 0.8mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 with welded or soldered joint complete all as specified and as directed by Engineer-in-Charge.
Dismantling of 100mm dia cast iron / 110mm dia PVC pipe including bends/branch pipe jointed in cement mortar and taking out if required complete all as specified and as directed by Engineer-in-Charge
Supply and fix UPVC (SWR), type B, single socketed rain water/soil waste/vent pipes with rubber ring joints, 110mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge. Make: Finolex/Prince/Kisan/Supreme/SFMC
Supply and fix UPVC (SWR) bends of any radius 110mm bore with access door etc complete all as specified and as directed. Make: Finolex/Prince/Kisan/Supreme/SFMC
Dismantling false ceiling/wall cladding sheets of any description including cover fillets and removing clear off site after credit for the same is recovered by the dept complete all as specified and as directed .
Supply and fix anodised aluminium snap grid frame work for false ceiling conforming to IS 733, IS 737 and IS 1285 including all ceiling cleats, 4mm dia GI wire suspender with necessary main tee 35.00 x 23.50 x 1.50mm , cross tee and wall angle of size 23.50 x 23.50 x 1.5mm with 605 x 605mm grid system including 12mm thick gypsum board with all connected accessories suitably placed in false ceiling grid as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge. Make: Gypsum board /Arm Strong/Ramco/Bisan
Supply and fix anodised aluminium snap grid frame work for false ceiling conforming to IS 733, IS 737 and IS 1285 including all ceiling cleats, 4 mm dia GI wire suspender with necessary main tee 35.00 x 23.50 x 1.50mm, cross tee and wall angle of size 23.50 x 23.50 x 1.5 mm with 605 x 605 mm grid system including exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fiber for fixing in 600 x 600 mm grid system with all connected accessories suitably placed in false ceiling grid as per manufacture instruction complete with necessary design in single/double complete all as specified and as directed by Engineer-in-Charge. Make: Gypsum board /Arm Strong/Ramco/Bisan
Supply and fix anodised aluminium snap grid frame work for false ceiling conforming to IS 733, IS 737 and IS 1285 including all ceiling cleats, 4 mm dia GI wire suspender with necessary main tee 35.00 x 23.50 x 1.50mm , cross tee and wall angle of size 23.50 x 23.50 x 1.5mm with 605 x 605mm grid system including exposed metal frame ceiling with providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with GI wire mesh all connected accessories suitably placed in false ceiling grid as per manufacturer's instruction complete all as specified and as directed by Engineer-in-Charge. Make: Gypsum board /Arm Strong/Ramco/Bisan
Supply and fix for 10mm (+/-0.25mm) solid PVC prelaminated insulation panels of density of 600Kg/cum (water proof) of size 600mmx600mm suitably placed in false ceiling grid . The panel is inserted in a frame made of anodised aluminium 'T' section of size 1" x 1" (25mm x 25mm) in square type grid of size 2' x 2' ( 600mm x 600mm), the aluminium framework/grid work is supported from the ceiling with the help of 'J' hook and GI wire/ 4mm MS rods of required size to maintain proper level, the aluminium framework is supported on side wall with the help of aluminium 'L' section of size 1" x 1" (25mm x 25mm) angles complete including dismantling of existing false ceiling with grid complete all as specified and as directed by Engineer-in-Charge. Make: Gypsum board /Arm Strong/Ramco/Bisan/M/s Rajshri
Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing clear off site after credit for the same is recovered by the dept complete all as specified and as directed by Engineer-in-Charge
Demolition of reinforced cement concrete in chajja / roof projection/ RCC water tank, in any position and similar suspended work including necessary scaffolding arrangement (reinforcement cut as required to facitate demolition), disconnecting inlet/outlet as per requirement and removal of rubbish outside MD land all as specified and as directed by Engineer-in-Charge.
Material and labour for precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C-1 using 20mm graded stone aggregate, exceeding 10cm in width and set in cement mortar 1:6 complete all as specified and as directed.
Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge
Material and labour for rendering 5mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour for rendering 15 mm thick in CM 1:4 on concrete / brick masonry surfaces including mixing of water proofing compound at the rate of 3% by weight of cement or as per manufacturer's instructions and finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note : Integral water proofing compound will be measured and paid separtely
Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit
Material and labour for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparing new plastered surfaces and applying two coats of Acrylic weather proof coat 100 % exterior grade paint over one coat of acrylic primer on wall surfaces complete all as specified and as directed by Engineer-in-Charge and as per manufacturers instructions. Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India
Supply and fix rotational moulded polyethylene water storage tanks 500 litres capacity with inlet connections, three layer (cylindrical or vertical with closed top) HDPE with ISI marked, hoisted and fixed in position either inside or out side of the building, including fixing accessories and connecting up pipes, securing access covers including taking down existing tank etc complete all as specified and directed by Engineer-in-Charge Make : Sintex / Polycon, Jaipur / Rotex / Infra
Supply and fix rotational moulded polyethylene water storage tanks 750 litres capacity with inlet connections, three layer (cylindrical or vertical with closed top) HDPE with ISI marked, hoisted and fixed in position either inside or out side of the building, including fixing accessories and connecting up pipes, securing access covers including taking down existing tank etc complete all as specified and directed by Engineer-in-Charge Make : Sintex / Polycon, Jaipur / Rotex / Infra
Supply and fix rotational moulded polyethylene water storage tanks 1000 litres capacity with inlet connections, three layer (cylindrical or vertical with closed top) HDPE with ISI marked, hoisted and fixed in position either inside or out side of the building, including fixing accessories and connecting up pipes securing access covers including taking down existing tank etc complete all as specified and directed by Engineer-in-Charge Make : Sintex / Polycon, Jaipur / Rotex / Infra
Supply and fix rotational moulded polyethylene water storage tanks 2000 litres capacity with inlet connections, three layer (cylindrical or vertical with closed top) HDPE with ISI marked, hoisted and fixed in position either inside or out side of the building, including fixing accessories and connecting up pipes securing access covers including taking down existing tank etc complete all as specified and directed by Engineer-in-Charge Make : Sintex / Polycon, Jaipur / Rotex / Infra
Demolition of the existing brick coba treatment over roof slab completely including throughly cleaning complete all as specified and removal of the demolished material to outside MD land complete all as specified and directed by Engineer-in-Charge
Material and labour for plain cement concrete 1:2:4, type B0 using 12.5 mm graded aggregate mixed with water proofing compound @ 3% by weight of cement or as per manufacturer's instructions as in levelling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamferred on edges and formwork for fair finished surfaces etc complete all as specified and directed by Engineer-in-Charge Note :- WPC will be measured & paid separately as supplied only.
Material and labour for rendering 10mm thick plaster in Cement Mortar (1:3) mixed with water proofing compound @ 3% by the weight of cement or as per manufacturer instructions on roof slab/canopies/Chajjas and finished the surface even and fair etc complete all as specified and as directed by Engineer-in-Charge. Note :- WPC will be measured & paid separately as supplied only.
Material and labour for APP modified waterproofing treatment over existing RCC roof slab with following specification including brushing off the surface to receive the treatment obtain the required surface complete as directed by Engineer-in-Charge :- (a) Applying oil bound bituminous primer @ 0.4lit/Sqm of density 0.87-0.89Kg/lit of 250C on the prepared dry roof surface. (b) Laying 3mm thick APP membrane weight not less than 3.90 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap. The laying of membrane shall be got done through an authorized applicator of manufacturer of APP membrane. (c) Over the membrane provide 20mm thick screed in cement mortar 1:4 mixed water proofing compound at the rate of 2% by weight of cement (d) Provide 300 x 300 x 20mm thick machine pressed cement concrete tiles with minimum thickness of joint (not exceeding 3mm) are thoroughly filled with water proof polymer based joint mortar. Note : (i) Water proofing compound will be measured and paid separately (ii) Quoted rate includes the disconnection existing tanks of any litres capacity including all fittings, setting aside (for lowering if reqd) for roof treatment & reconnecting and refixing in position including all fittings complete all as directed. Make- STP Ltd/ Texsa India Ltd/ IWL Ltd/ TIKIDAN
Material and labour for APP modified membrane roof treatment to parapet wall surface to the following specification:- (a) Applying oil bound bituminous primer @ 0.4lit/Sqm of density 0.87-0.89Kg/lit of 250C on the prepared dry roof surface. (b) Laying 3mm thick APP membrane weight not less than 3.90 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap. The laying of membrane shall be got done through an authorized applicator of manufacturer of APP membranem. (c) Applying one coat of solar reflective bituminous paint all as per manufactures's instruction complete all as specified and as directed. Make- STP Ltd/ Texsa India Ltd/ IWL Ltd/ TIKIDAN
Supply and fix mild steel tubing medium grade 25mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including taking down existing GI pipe and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith
Supply and fix mild steel tubing medium grade 20mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including taking down existing GI pipe and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith
Supply and fix in repairs Ball Valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed of 20mm bore complete all as specified and as directed by Engineer-in-Charge (Minimum weight - 210 gms) Make : Jaypee/GMP/Neta/Zoloto/Prayag/Symet
Supply and fix in repairs gun metal gate valve, 20mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union complete all as specified and as directed by Engineer-in-Charge. Make : Leader/Zoloto/Seiko/Sant/ Essco/Prayag
Material and labour for preparing new or old wood surfaces of any description width or girth, not otherwise described and treated with two coats of Creosote oil complete all as specified and as directed by Engineer-in-Charge.
Material and labour for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
Material and labour for removing vegetation, trees, plants and shrubs etc in any position by cutting hole in to brick wall/concrete surface (for removing the roots of trees/plants) area n. exceeding 0.50 sqm each and using acid to burn the all roots of tree/plants and making good disturbed surface with cement concrete (1:2:4) type B1 using 20mm graded aggregate mixed with water proofing compound by 3% of weight of cement and including making good adjoining surface including existing finishes complete all as specified and as directed by Engineer-in-Charge. Note - The rate is including necessary scaffolding work .
Note: Deduct Credit for demolished / dismantled material of Rs. (-) 1,90,610.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'
Vishal Builders
S.N Enterprises
Chaudhary Enterprises
Parmatma Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .