85900 PROVN OF ARBORICULTURE WITH LANDSCAPING AT OFFICE OF THE PCDA(O) PUNE AND STUDENT OFFICERS MESS OF MINTSD UNDER GE (SOUTH) PUNE

Amount

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out any type of soil.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removal excavated soil n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed.

M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundations, filling in mass concrete etc complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B1 (using 20mm graded aggregate) for foundations, including rafts, footings, plinth beams, bases for columns, etc complete all as specified and as directed.

M&L for reinforced cement concrete 1:2:4 type B1 (using 20mm graded aggregate) for Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and as directed.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat rough finished surfaces of concrete complete all as specified and directed.

M & L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for flat rough finished surfaces of concrete complete all as specified and directed.

M&L for TMT bar 10mm dia and over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement complete

All as per Ser. Item No. 09 above but 8 to 10mm dia as in stirrups complete all as specified and as directed.

M & L for solid block masonary exc. 10 cm width blocks of PCC design mix Gde C-5 set in CM (1:6) complete all as specified & directed by Engr-in-Charge.

M&L for 15mm thick rendering in CM 1:4 over brick / concrete wall surfaces with using water proofing compound trowelled to even & smooth w/o using extra cement for external wall surfaces complete all as specified and as directed. (Note : WPC shall be paid separtely)

M & L for natural rubble stone boulders, in large pieces of not less than 0.50m dia for fixing on fountain water way with zig zag manner including necessary jointing in cement mortar and chemical adhesive for water tightening the surfaces etc complete all as specified and directed.

Supply only Liquid water proofing compound.

M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed.

Supply and laying 20mm GI galvanised,with all fitting andfixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm Gun-metal, globe or gate valves,with iron wheelhead, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Supply, Installation, Testing & commissioning of Centre High Jet Nozzle 50mm dia with Body :- Brass (Chrome Plated) complete all as specified and directed by Engr-in-Charge.

Supply, Installation, Testing & commissioning of ICE Tower Nozzles suitable for 50mm dia with UPVC pipe Body :- Brass (Chrome Plated) complete all as specified and directed by Engr-in-Charge.

Supply, Installation, Testing & commissioning of 2.2 KW, 3 HP, 3 Phase, 50 Hz 415V, S/D 65/50, 12.8 LPS at 8M head KOS+ series 2 pole openwell submersible pump, Body: CI ( Cast iron ) Impeller C.I. complete all as specified and as directed by Engr-in-Charge.

Supply, Installation, Testing & commissioning of submerged LED lights IP 68 rating 12 watt suitable for 12 V supply with LEDs 1M flexible cable and cable gland, all complete all as directed by Engineer-in-charge.

Supply, Installation, Testing & commissioning of SS light Stand made out of 15mm square tubing to accommodate submerged LED light fittings as mentioned in Item No. 21 above complete all as specified and as directed by Engr-in-Charge.

Supply, Installation, Testing & commissioning of Switch Mode Power Supply (SMPS) Controller, suitable for 12 watts, 12 Volts, LED lights complete with drivers in water proof boxes for 06 LED Lights complete all as specified and as directed by Engr-in-Charge. (Note : Rates are inclusive for 4x control wires in suitable PVC conduits from SMPS to LED lights)

Supply, Installation, Testing & commissioning of Electrical panel suitable for operation 3 HP pump set & submerged LED lighting control of cubical type wall/floor mounted, 3.0mm thick CRCA sheet weather proof powder coated double door body IP-65 for recirculation pump in coming MCB', Relay, Contactor, Ammeter, Voltmeter, Single phase priventor, push button including starter, MCB's TPN 32A, 415V,'C' curve, beaking cap 10KA and MCB SP 32 A -03 Nos, C cuve including base connector, indicating lights, Thimbles, Wiring of panel etc. Accessories mounted on 40 x 40 x 6mm angle iron frame & legs frame duly grouted in PCC 1:4:8 type D2 (using 40mm graded aggregate) all as specified & directed. (Note : Panel distance at 10 mtr from the pool and light SMPS near about the water body.)

Supply, Installation, Testing & commissioning of wiring of under water lights & pump etc 3 core x 4 sqmm submersible wire with and including suitable size conduit from panel to pump & for submerged LED lights all as specified & directed by Engineer-in-Charge

Supply, Installation, Testing & commissioning of plumbing work such as UPVC Pipes of following size suitable for the respective working pressure 6 kg/cm2/10kg/cm2 with all fittings couplings, tees, bends, reducers, bushes, male & female thread adopters, screwed adaptors, & joining with solvent chemicals etc for the following :-

UPVC Pipe 65 MM ( SCH -80)

UPVC Pipe 50 MM ( SCH -80)

Supply & fixing / laying of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 10 sqmm x 4 core laid in trenches, walls & floor complete all as specified & directed.

Supply & Laying Reinforced concrete pipes half round in two pieces of length one meter, class NP2 , laid and joined complete of size 150 mm bore complete all as specified and as directed.

M&L for Earthing complete with galvanized steel plate electrode 60 cm x 60 cm x 6 mm surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25 meter below ground level with top edge of the earth plate at a depth of not less than 1.50 meter below ground level connected to galvanized iron 25x4mm strip by means of bolts, nuts, check nuts and washers of galvanized iron, earth wire protected by galvanized steel pipe 15 mm dia (Light grade) & connected to main switch or main control board all as shown in electrical plate No.3 of SSR-2009 Part I & including necessary excavation and earth work. The rate also include charcoal and salt in alternate layers 20 mm dia pipe (Light grade) for watering, protection pipe, funnel, wire mesh, PCC chamber in cement concrete (1:3:6) type C-I, 40 mm thick RCC (1:2:4) type B-1 cover and CI frame etc. complete all as specified and as directed (Note : Rate is inclusive of copper strip upto 7.5mtr length and beyond 7.5 mtr shall be measured and paid separately).

Supply & fix galvanized iron water tubing, light grade 40mm bore in walls/ floors/ road etc, including provision of all necessary steel fittings/ accessories, complete all as specified and directed.

Supply only Palm Tree 4 to 5 feet height complete all as specified and as directed.

Supply only Classia Fistula (Golden shower) tree 4/5 feet complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving not exc 15cm thick (below or above ground level) un-reinforced complete all as specified and as directed.

Removal of excavated material i.e. exc. 1.5Km upto a total distance of 5 Km and deposited where directed.

Digging and removal of debrise weed / roots etc upto 15cm and provision of anti-termite treatment, refilling with good poita garden soil & cattle manure in the ratio of 3:1 mixing, levelling & planting of American Grass / Phospho lawn and maintaining lawn for a period of well growth complete

All as per Ser. Item No. 40 above but for Areca Palm Tree (Plant height 0.60 to 0.90 mtr) complete all as specified and as directed.

All as per Ser. Item No. 40 above but for Morpankhi Tree (Plant height 0.60 to 0.90 mtr) complete all as specified and as directed.

All as per Ser. Item No. 40 above but for Boganila Tree (Plant height 0.60 to 0.90 mtr) complete all as specified and as directed.

All as per Ser. Item No. 40 above but for Jasmine Flowering Tree (Plant height 0.60 to 0.90 mtr) complete all as specified and as directed.

All as per Ser. Item No. 40 above but for Peacelily Tree (Plant height 0.60 to 0.90 mtr) complete all as specified and as directed.

Maintenance by regular watering and supervision of trees, shrubs, plants, climbers, hedges, carpet grass etc incl. spreading of pesticides, fertilizers, insecticides at a desired periodicity, deweeding, removing / adding earth, cleaning, removal of dead leaves, replacing dead plants with new plants etc all as directed by Engr-in-Charge for plantation under Ser. Item No. 33 to 45 by employing one gardener at each site total 02 (Two) Nos of gardener daily with working of 08 hours per day. Maintenance period will start after completion of Item No. 33 to 45 under Phase-I. (Note : The Quoted rates deemed to be includes cost of replacement of Plants/grass/ shrubs/ hedges and providing fertilizers, pesticides, etc including planting against casuality if any during maintenance period of 24 months

M/S AG HORTICULTURE SERVICES