Special repair to Bldg No T-166 (single JCO living) and Bldg No T-93 (OR living) at Mil Stn Beas under GE Kapurthala.

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engr-in-Charge.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.

-Ditto- all as per item No 02 above but except bricks etc. complete all as specified and directed by Engr-in-Charge.

Demolition reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

Demolition cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving not exceeding 15cm thickness (below or above ground level) etc complete all as specified and directed by Engr-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thicknness, including cover fillets, complete all as specified and directed by Engr-in-Charge.

Dismantling asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings including ridges, complete all as specified and directed by Engr-in-Charge.

Dismantling taking down framed trusses of span not exceeding 10m, complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames with shutters not exceeding 1.5 sqm each (without taking off shutters from the frames), complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames with shutters exceeding 1.5 sqm but not exceeding 4 sqm each (without taking off shutters from the frames) complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engr-in-Charge.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Engr-in-Charge.

Taking up or down Steel Tubing bore of pipe in 15mm and connections, including cleaning for refixing or removal to store etc. complete all as specified and directed by Engr-in-Charge.

All as per item No. 15 above but of 20mm bore complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls finished even and fair, complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls finished even and fair, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over and including a coat of chalk whiting/priming on plastered surfaces of walls, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces and distempering walls with two coats of distemper oil emulsion, white or tinted over and including 1mm thick wall care putty including primer, complete all as specified and directed by Engr-in-Charge.

Erection and fixing only steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed by Engr-in-Charge.

Erection and fixing only steel tubular work as in purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

M&L for joint free non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for coloured glazed ceramic tiles in vertical surface 450x300x7 mm thick laid over 10mm thick screed bed in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engr-in-Charge.

M&L for 100mm thick cement concrete type D-2, 1:4:8 as in Subbase flooring complete all as specified and directed by Engr-in-Charge.

M&L for 40mm thick PCC 1:2:4 type B-1 with 20mm graded stone aggregate as in flooring, finished even and rough to receive the topping layer complete all as specified and directed by Engr-in-Charge.

M&L for 50mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in plinth protection finished even and fair laid to a slope of 1 in 20 in alternate bays, each bay not exceeding 3m in length with joint to be filled with bituminous mastic filling comprising a mixture of 1 part of heated hot blown bitumen 85/25 penetration and three parts of heated sand, complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium snap grid of size 605 x 605mm in frame work for false ceiling complete all as specified and directed by Engr-in-Charge.

Providing and fixing Gypsum Board 8mm thick of size (600x600)mm in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed by Engr-in-Charge. (frame work for ceiling shall be measured and paid separately).

M&L PCC 1:2:4 Type B-1 ( 20 mm graded stone aggregate) as in bed blocks, coping, etc complete all as specified and directed by Engr-in-Charge.

S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B-1 Four Nos for each window including following fitting welded to frame shutter : (a) Hold fast, 150mm long of 12mm square bar made to shape-04 Nos per window (b) Handles of z section 100mm long (c) Stopper - 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges - 01 No per leaf (e) MS Pintal hinges of size 75mm x 75mm x 12mm-02 Nos per leaf (f) Fabrication & fixing arrangement as per drg No CEJZ/TD-7/07 sheet 1/3 to 3/3. Note : Glass and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed by Engr-in-Charge.

S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm, single rebated comprises gauzed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:3:6) type C-1 Four Nos for each window including following fitting welded to frame shutter : (a) Mild Steel Hold fast, 150mm long of 12mm square bar made to shape-04 Nos per window (b) Handles of z section 20mm x 100mm long (c) Stopper - 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges - 01 No per leaf (e) MS Pintal hinges of size 75mm x 75mm x 12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note : Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed by Engr-in-Charge.

S&F Steel Ventilator 1.25mm thick Box Type fixed type prepared for fixing of gauzed and glass ( primer coated) ERW hollow P section of size 60mm x 25mm including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each vent ) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per vent (b) Handles of Z Sec 20mm x 100mm long (c) Stay (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Wire mesh/glass pane and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed by Engr-in-Charge.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engr-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F solid PVC Door Frame of size 50mm x47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube and edges will be painted to match with printed sheets, suppyling & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-Charge.

M&L for framed work as in doors or gates and chowkhats of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165) complete all as specified and directed by Engr-in-Charge.

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; & 5mm thick x 15mm wide PVC sheet beading use inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree)used. Panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge.

S&F 2nd class HW 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, gauge etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

S&F 3mm thick plain acrylic sheet, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane, complete all as specified and directed by Engr-in-Charge.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wodden beads to steel windows/wodden doors complete all as specified and directed by Engr-in-Charge.

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-Charge.

S&F Mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engr-in-Charge.

S&F Mild steel barrel tower bolts 200mm long, stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engr-in-Charge.

S&F Aluminium anodised barrel tower bolts of extruded section of 125mm size etc complete all as specified and directed by Engr-in-Charge.

S&F Mild steel pressed handles of size 150mm, oval type, stove enamelled black complete all as specified and directed by Engr-in-Charge.

S&F Aluminium handles, cast type anodised of size 125mm etc complete all as specified and directed by Engr-in-Charge.

S&F 100mm size stainless steel butt hinges, medium weight complete all as specified and directed by Engr-in-Charge.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floorwith Overall length of cover plate 140mm complete all as specified and directed by Engr-in-Charge.

S&F 20 mm dia curtain rod of mild steel with decorative finish , with fixing brackets complete all as specified and as directed (two brackets per opening of door and window and 08 Nos PVC rings) complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

M&L for providing reinforced cement concrete cast in situ Type B-1, 1:2:4 ( 20 mm graded stone aggregate) as in lintels upto 1.5m clear span including necessary formwork complete all as specified and directed by Engr-in-Charge. (Note : Reinforcement shall be measured and paid separately)

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed by Engr-in-Charge.

-Ditto- all as per item No 58 above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders complete all as specified and directed by Engr-in-Charge.

S&F in repair Vitreous China Wash Basin with full pedestal, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc including 15 mm dia Pillar taps, cast copper alloy with capstan heads Chromium Plated, screwed down high pressure, with or without lettered with long screwed shanks and fly-nuts, screwed for iron pipe but fancy type and fixed etc complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devices with recessed bottom, jet spray, etc complete all as specified and directed by Engr-in-Charge.

S&F in repair Low Level Flushing System PVC valveless syphonic action type, 10 ltrs capacity including supply pipe & fixing brackets of M.S. angle of size (25mmx25mmx3mm), 30 cm long in PCC (1:2:4) type B-1, block of size (10cmx10cmx10cm) on walls etc complete all as specified and directed by Engr-in-Charge.

S&F in repair Stop valves/Angle valves, cast copper alloy, bore dia of pipe in 15mm, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for ironn pipe and fixed but fancy type, brass chromium Plated complete all as specified and directed by Engr-in-Charge.

S&F in repair Stop valves/Angle valves, cast copper alloy, bore dia of pipe in 15mm, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for ironn pipe and fixed but fancy type, Chromium Plated with long shank and cup (concealed type) etc complete complete all as specified and directed by Engr-in-Charge.

M&L for brass chromium plated bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed to 15mm bore pipe fixed as in repairs including taking down old tap of any description complete all as specified and directed by Engr-in-Charge.

S&F PVC connection 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs shower rose of brass chromium plated with shower arm 195mm long with bend of 45 degree 15mm dia complete all as specified and directed by Engr-in-Charge.

S&F CP grating 100mm dia with waste hole of etc complete all as specified and directed complete all as specified and directed by Engr-in-Charge.

S&F towel rail 600mm long of stainless steel fixed with and including Chromium plated brassscrews and or cleats complete all as specified and directed by Engr-in-Charge.

S&F CP soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge.

Disconnecting existing PVC water tanks, setting aside (or lowering if required) and cleaning and removing all scales and dust from PVC water tank manually and cleaning, scraping inner surfaces of tank by means of brush and then washing with clear water and cleaning of mouths of circulating pipes of capacity of tank exceeding 250 litre but not exceeding 500 litre and reconnecting and refixing in position complete all as specified and directed by Engr-in-Charge.

S&F rotational moulded polyethylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including 20mm dia ball brass valve, complete all as specified and directed by Engr-in-Charge.

S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to steel pipe or union, 20mm bore dia of pipe complete all as specified and directed by Engr-in-Charge.

Cutting holes into or through brick walls superfacial area n.exc. 150 sqcm bult in cement mortar or cement lime mortar and making good in c.m 1:3 or cement concrete 1:2:4 type B-1 including matching the surfaces with the existing surface finishes complete all as specified and directed by Engr-in-Charge.

S&F Steel Tubes Medium Grade Bore of tube in 15mm galavanised with all fitting laid in trenches, walls, ceiling or laid in floors etc including cutting chases, pinning in brick walls making good to facings complete all as specified and directed by Engr-in-Charge.

All as per item No 76 above but of size of 20mm bore complete all as specified and directed by Engr-in-Charge.

S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints laidin trenches or in floors complete all as specified and directed by Engr-in-Charge.

S&F 110 mm bore PVC(SWR) bend any radius complete all as specified and directed by Engr-in-Charge.

S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed by Engr-in-Charge.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) floor trap of 110mm outlet dia, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to walls as a vent pipe complete all as specified and directed by Engr-in-Charge.

S&F 75 mm bore PVC (SWR) vent cowl, complete all as specified and directed by Engr-in-Charge.

Excavating in trenches in any type of soil not exceeding 1.5m wide and not exceeding 1.5 m depth for foundation & getting out, complete all as specified and directed by Engr-in-Charge.

M&L for providing cement concrete type D2 1:4:8 (40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed by Engr-in-Charge.

Returning filling including spreading, leveling, watering and well ramming in layers not exceeding 25cm for soft/loose soil, complete all as specified and directed by Engr-in-Charge.

Removing excavated materials (soil) to a distance not exceeding 50m and depositing where directed of a level not exceeding 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick cement concrete type C2 1:3:6 (40mm graded stone aggregate) in sub base complete all as specified and directed by Engr-in-Charge.

Material and labour for ceiling using 9mm thick gypsum based ceiling tiles with wheather resistance face on back side and vinyl finish on the front fixed in 24mm GI armstrong frame work of grid 600x600 mm size, the members of snap grid frame work of GI/Steel section of 24mm wide with T-flanges, channels etc of white colour having rotary stiching on all members, i.e main runner, 1200x600mm cross tee galvanised with minimum thickness of 120 gms per/sqm passed through 500 hrs test and hanging the same with existing roof members such as rafters, pulins or other wooden members particularly provided for hanging pupose using 8mm dia mild steel bar of required length fixed with nut bolt of 50mm long and 10mm dia of neck with washer flat iron 50x6mm thick clamps etc to steel members, complete all as specified and directed by Engr-in-Charge.

S&F Mild steel 300mm, helical springs including roller and roller plate complete all as specified and directed by Engr-in-Charge.

S&F Butt hinges 100mm size, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wood surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer, complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete type D2, 1:4:8(40mm graded aggregate) as in foundations, filling and mass concrete, complete all as specified and directed by Engr-in-Charge.

Supplying and filling sand under floors or in foundations including watering and consolidation, complete all as specified and directed by Engr-in-Charge.

M&L for Machine pressed precast concrete interlocking paver block, 80mm thick, any shape and size, confirming to IS-15658-2006, M-40 Grade, with grey cement and no pigment complete all as specified and directed by Engr-in-Charge. Make : Supertile.

Taking down carefully copper/ aluminium point wiring (light/ fan/bell/ socket or power point) complete inclusive of all fittings such as switches, ceiling roses, pendants, regulators, sockets, fittings etc. removing materials from site and making good disturbed surfaces of floors/walls/ceiling etc complete all as specified and directed by Engr-in-Charge.

M & L for point wiring for one light or one fan point controlled by one switch or with one switch and regulator with PVC unsheathed single core multistranded copper conductor (FRLS) cable of size 1.5 Sqmm (nominal area) in and including PVC conduit 20 mm bore by cutting chases in wall by cutter and making good the surface in cm 1:3 and to the original specification and cast iron /pressed steel concealed terminal boxes including providing 3mm thick plastic laminated sheet cover (Hylem) including one run of PVC insulated copper conductor (FRLS) cable of size 1.5 sqmm with green insulation as earth wire and connected to earth dolly complete all as specified and directed by Engr-in-Charge. (Switch/Socket outlet to be measured & paid for separately). Make of cable : Finolex/Anchor/Havell's

All as per Serial item No 99 here in before but for 3 pin socket outlet 5 Amps on the same board complete all as specified and directed by Engr-in-Charge.

All as per Serial item No 99 here in before but for 3 pin socket outlet 5 Amps on the independent board complete all as specified and directed by Engr-in-Charge.

All as per srl item No 99 here in before but for 3 pin socket outlet 15 Amps on independent board with PVC unsheathed copper conductor cable of size 2.50 Sqmm including copper earth wire of size 1.50 Sqmm and connected to common earth dolly complete all as specified and directed by Engr-in-Charge. (Switch/socket to be measured & paid for separately)

Supply and fix in replacement sub main wiring with two single core FRLS insulated cable with copper conductor stranded and sheathed of size 6 sqmm in and including PVC conduit including 1 x 6 sqmm FRLS copper earth wire to common earth and connected to earth dolly complete all as specified and directed by Engr-in-Charge.

Supply and fixing switch piano flush type 5 Amp single pole one way complete all as specified and directed by Engr-in-Charge.

Supply and fixing switch piano flush type 15 Amp single pole one way complete all as specified and directed by Engr-in-Charge.

Supply and fixing socket outlet 5 Pin 5 Amps flush type multipurpose complete all as specified and directed by Engr-in-Charge.

Supply & fixing socket outlet multipurpose 2 in one, 3 pin 5/15Amps flush type complete all as specified and directed by Engr-in-Charge.

Supply & fixing bell push flush type 5 Amp single pole one way complete all as specified and directed by Engr-in-Charge.

Supply & fixing ceiling rose surface Bakelite 65 x 50 mm of three terminals complete all as specified and directed by Engr-in-Charge.

Supply & fixing fan regulator electronic step type and making connections complete all as specified and directed by Engr-in-Charge. (Make : Anchor/Leader/Bajaj)

Supply and fixing call bell Ding dong single phase 240 volt AC complete all as specified and directed by Engr-in-Charge.

Supply & fixing Angular lamp holder insulated body with back plate suitable for batten fittings including 1 x 9 W LED Lamp Make Heavells LED ADORE 9 W B22 WW 3 STAR MAMP Cat No LHLDEUEEMC8R009 or equivalent complete all as specified and directed by Engr-in-Charge.

Taking down old unserviceable FTL fitting 36/40Watt and S & F surface mounting energy saving LED tube light fitting, 1x22W, 230V , high efficiency PMMA diffuser gives soft glare free light with LED tube rode 20 W (White) complete with all accessories complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of ceiling fan 1200 mm sweep, 240 Volts Colour- Opal White Make- Havells / Crompton /Orient/Bajaj and connecting up including provision of flexible copper conductor cable from ceiling rose / connector to fan and GI pipe/ steel rod, nuts, bolts, clamps etc as required at site complete all as specified and directed by Engr-in-Charge.

Supply and fix exhaust fan AC single Phase. 230V of size 300m sweep withlouver (Plastic body) including necessary cutting to wall in suitable dia for the fixing of exhaust fan and making it in good finish with plaster work complete all as specified and directed by Engr-in-Charge.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate NRV, connection piece etc. complete all as specified and directed by Engr-in-Charge.

Supply and fixing PVC connection cold water pipe 18" long, 15mm dia with brass jem nut and wahser, both side complete all as specified and directed by Engr-in-Charge.

All as per ser item No 21 here in before but hot water pipe made of chromium plated brass flexible tubing complete all as specified and directed by Engr-in-Charge.

Supply and fixing stop cock brass of size 15mm dia Make : Sant/Zoloto complete all as specified and directed by Engr-in-Charge.

Supply and fixing bib cock brass of size 15mm dia Make : Sant/Zoloto complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning including taking down old burnt/unserviceable MCBs.Make Legrand /Havells/ Schnieder & L & T complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of 240V, 10KA 'B' curve miniature circuit breaker (MCB) SPN 40 AMP capacity in the MCB DB complete with connection testing and commissioning including taking down old burnt/unserviceable MCBs.Make Legrand /Havells/ Schnieder & L & T complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of 240V, 10KA 'B' curve miniature circuit breaker (MCB) SPN 63 AMP capacity in the MCB DB complete with connection testing and commissioning including taking down old burnt/unserviceable MCBs.Make Legrand /Havells/ Schnieder & L & T complete all as specified and directed by Engr-in-Charge.

Supply & fixing sheet metal enclosures with double door, detachable gland plates flush/ mounting for MCB’s fitted with bus bar, earth wire and neutral link, SPN 12 ways, 240 volts Make : Havells/Legrand complete all as specified and directed by Engr-in-Charge.

Supply & fixing sheet metal enclosures with double door, detachable gland plates flush/ mounting for MCB’s fitted with bus bar, earth wire and neutral link,TPN 4 ways, 415 volts Make : Havells/Legrand complete all as specified and directed by Engr-in-Charge.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm for transformer/LT Panel using strip as earthing lead complete all as specified and directed by Engr-in-Charge.

Disconnecting and taking out old u/s cable of service connection/sum main of any size and type from pole to DB's/Main switch complete all as specified and directed by Engr-in-Charge.

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for taking out old cable/laying of under ground cable/foundation of poles/stays including segregation of old serviceable bricks complete all as specified and directed by Engr-in-Charge.

Returing, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer complete all as specified and directed by Engr-in-Charge.

Removal of surplus soil to a distance not exceeding 50 mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-Charge.

M & L for brick protection using old size sub class 'B' bricks, laid flat dry but adjoining to each other laid lengh wise perpendicular to the axis of cable complete all as specified and directed by Engr-in-Charge.

Supplying, filling in trenches spreading, leveling sand cushioning 8 cm below and 15 cm above the cable for under ground cable complete all as specified and directed by Engr-in-Charge.

Supply, laying and testing cable XLPE Insulated, screened PVC bedded, galvanized steel or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core complete all as specified and directed by Engr-in-Charge.

Supply, laying and testing cable XLPE Insulated, screened PVC bedded, galvanized steel or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 2 core complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED bldg security light fitting 35 watt Powder coated pressure die cast aluminium compact LED security light including 1.5 mtr long 40 mm bore GI pipe mounting bracket made to shape for fixing on wall with 40 mm x 6 mm flat iron clamp 02 numbers with 16 mm dia bolts, nuts and washers all as specified and directed by Engineer-in-Charge.Make- Crompton, Product Code -LSTS-20-CDL-M or equivalent in Bajaj/Philips/Polycab /Havells: Contractor shall provide 1 years written manufactures warranty for the LED fixture complete including driver from the certified date of completion complete all as specified and directed by Engr-in-Charge.

Material and labour for GI pipe 'light grade' galvanised with all fitting laid in trenches/on pole/road crossing of size 50mm complete all as specified and directed by Engr-in-Charge.

SUNRISE CONSTRUCTION COMPANY