REPLACEMENT OF FURNITURE OUT OF MAINT GRANTS AGAINST SURVEYED OFF FOR OFFRS / JCOS /ORS MD ACCN AND OTM ACCN UNDER GE(EAST) LUCKNOW

Part - I Wooden Furniture

Table with drawer (900mmx600mmx760mm) FD-1008 Specifications shall be as under (a) Overall size shall be 900 mm long 600 mm wide and 760mm high. Steel frame shall be of size 800 mm long X 500 mm wide X 742 mm high, (b) Four legs made out of 25 mm CRCA square tube of 1.6 mm thick shall be provided as shown on drawing. Top of legs shall be joined together on long and short sides with 25 mm CRCA square tube of 1.6 mm thick. Hard rubber shoes of premium quality shall be provided to the bottom of legs. (c) Irrespective of what is shown on the drawing, the top of table shall be made out of 25 mm thick pre-laminated HDHMR board BSL with 2mm PVC edge binding of approved make duly pasted mechanically . (d) Drawer shall be provided below the top frame at right hand side as shown on drawing duly fixed with soft close channel. A lock of 25 mm as per sample approved by Engr-in-Charge/ GE shall be provided to the drawer. (e) All steel surfaces shall be powder coated with high glossy finish after preparation of surfaces by degreasing & de-rusting as per the colour/ shade approved by Engineer-in-Charge/ GE. (f) Rest all as specified / shown on drawing and as directed by Engr-in-Charge.

Table Dining 6 pers FD/MAP-II/03 having specifications as under :- All wood work shall be first class HW well-seasoned teakwood with permissible moisture contents as per IS-287-1973. Top shall be made of 16 mm thick plain HDHMR board with 1 mm thick laminate both side in colour/shade as approved by EIC/GE with 2 mm thick PVC edging fixed around with strong bonded chemical adhesive through hot pressed machine complete. Hard nylon shoe / buffers shall be provided to each leg. Irrespective of what is shown on drawing the top shall be fixed on top of table. Irrespective of what is shown on drawing short shall be made with same thickness as long rails . All exposed wooden surfaces shall be high glossy PU polish with spray machine. Polish work shall be done at BSO yard. Rest all as per drawing or as directed by EIC.

Chair Easy Timber shall be first class teakwood, seasoned free from knots & cracks with moisture content permissible limit as per IS-281-1973. Seat shall be made of 75 mm thick PU foam 32 Density And back shall be made of 50 mm thick PU foam 32 Density with tapestry as approved by EIC. PVC rings shall be screwed to each leg. All wooden portion shall be smoothened to apply best quality PU polish glossy finish with spray machine according to trade pattern furniture. Polish work shall be done at BSO Yard. Rest all as per drawingg or as directed by EIC.

Bin linen multi purpose FD/E6/MAP/09 having specifications as under :- Top / Sides / Shutters / Drawers / bottom / partition shall be mde of 16 mm thick plain HDHMR board with 1 mm thick laminate both side colour/shade shall be approved by EIC/GE. Telescopic channel shall be provided to each drawer and bottom of drawer shall be made of 9 mm thick pre-laminated HDHMR board. Standard quality magnetic catcher shall be provided to each shutter. S/S handle shall be provided to shutter / drawer as per sample kept at BSO yard. 12mm thick pre-laminated HDHMR board shall be provided on back side .4 No’s SS 304 grade legs of 4 inch height shall be provided in lieu of skirting/legs complete as directed by Engr-in-Charge. Heavy duty SS L bihari hydraulic hinges standard quality shall be provided to each shutter. Standard quality Cam lock connector/dowels fastening /universal angle/PVC corner shall be used in fabrication body/structure of item. PVC edging 2 mm thick shall be used to exposed surfaces parts except sides of drawer and 0.8 mm thick shall be provided on sides of drawer with edge bender machine as directed by Engr-in-Charge .Rest All wooden surfaces / wood based materials shall be PU polished with high class finish. Rest all as per drawing or as directed by EIC.

Side Board FD-1112 having specifications as under:- Top / Sides / Shutters / Drawers / bottom / partition shall be made of 16 mm thick plain HDHMR board with 1 mm thick laminate both side colour/shade shall be approved by EIC/GE. Telescopic channel shall be provided to each drawer and bottom of drawer shall be made of 9 mm thick pre-laminated HDHMR board. Standard quality magnetic catcher shall be provided to each shutter. S/S handle shall be provided to shutter / drawer as per sample kept at BSO yard. 12mm thick pre-laminated HDHMR board shall be provided on back side 4 No’s SS 304 grade legs of 4 inch height shall be provided in lieu of skirting/legs complete as directed by Engr-in-Charge. Heavy duty SS L Bihari hydraulic hinges standard quality shall be provided to each shutter. Standard quality Cam lock connector/dowels fastening /universal angle/PVC corner shall be used in fabrication body/structure of item. PVC edging 2 mm thick shall be used to exposed surfaces parts except sides of drawer and 0.8 mm thick shall be provided on sides of drawer with edge bender machine as directed by Engr-in-Charge .Rest All wooden surfaces / wood based materials shall be melamine polished with high class finish. Rest all as per drawing or as directed by EIC.

Table Dressing ladies FD/MAP-II/07 having specifications as under :- All wood work shall be first class hard wood, TW. Top/side/drawer/bottom/back shall be made of 16 mm thick plywood BWP grade with 1 mm thick laminate both side colour /shades shall be approved by EIC/GE. Telescopic channel shall be provided to each drawer and bottom of drawer shall be made of 9 mm thick BWR ply with 1 mm thick laminate. 01 No’s Standard quality magnetic catcher shall be provided to each shutter. S /S handle shall be provided to drawer / shutter as per sample kept in BSO yard. Heavy duty S/S Piano hinges shall be provide to each shutter. Standard quality Cam lock connector/dowels fastening /universal angle/PVC corner shall be used in fabrication of body/structure of item. PVC edging 2 mm thick shall be used to exposed surfaces parts except sides of drawer and 0.8 mm thick shall be provided on inner sides of drawer with edge bander machine as directed by Engr-in-Charge. PVC beading 2 mm thick shall be provided to all round bottom of dressing. Cushion of stool dressing shall be 40 density with tapestry. Heavy duty revolving nylon double wheels ( 4 No’s) shall be used at the bottom of stool as shown on drawing. All exposed wooden surfaces shall be high glossy melamine polish. Rest all as shown on drawing and as directed by EIC.

Table Dressing Gents FD-230 Having specifications as under:- All wood work shall be first class hard wood, TW. Top/side/drawer/bottom/back shall be made of 16 mm thick plywood BWP grade with 1 mm thick laminate both side colour /shades shall be approved by EIC/GE. Telescopic channel shall be provided to each drawer and bottom of drawer shall be made of 9 mm thick BWR ply with 1 mm thick laminate. 12 mm thick plywood with both side laminate shall be used in back of table dressing box. S/S handle shall be provided to drawer as per sample kept in BSO yard. Standard quality Cam lock connector/dowels fastening /universal angle/PVC corner shall be used in fabrication of body/structure of item. PVC edging 2 mm thick shall be used to exposed surfaces parts except sides of drawer and 0.8 mm thick PVC edging shall be provided on inner sides of drawer with edge bander machine as directed by Engr-in-Charge. All exposed wooden surfaces shall be high glossy melamine polish. 5 mm thick mirror shall be used. Fixing of table dressing shall be done by the contractor. Rest all as shown on drawing and as directed by EIC.

Part - II Steel Furniture

Almirah med steel FD-1032 having specifications as under:- The overall size shall be of 1270mm x 765 mm x 440mm made of CRCA sheet. The body, legs & shelves shall be made of 1mm thick CRCA sheet. Welding process shall be of MIG or MAG. Locking arrangements shall be provided with duplicate keys. Irrespective of what is shown on drawing Steel cabinet lock Cum Handle with rod shall be provided in shutters. 04 No’s adjustable shoe shall be provided. All steel surfaces external/internal shall be powder coated of approved shade preparation of steel surfaces. Contrast colour shall be used for painting and colour shall be approved by GE/EIC. All joints (gaps) shall be filled with metal putty/primer before powder coating. Rest all as per drawing or as directed by EIC.

Bed plytop for JCO FD/E6/MAP/08® havingspecifications as under:- The complete frame work shall be made of CRCA box section with 18 gauge thick as per IS-4923. Bed top shall be 12mm thick BWR grade plywood and shall be fitted with shrunken nuts/bolts and washer as directed by EIC. irrespective of what is shown on drawingg complete foot board / head board shall be covered with 18mm thick pre-laminated HDHMR board exterior grade BSD with 0.8 mm thick PVC edging with edge bander machine, colour of board shall be approved by GE/EIC. Irrespective of what is shown on drawing MS strip shall be welded to support the /fixed the board and all 18 mm thick Square pipe in Head rest /foot rest shall not be provided . Rest all as directed by EIC. Head rest and foot rest shall be detachable. All metal work shall be powder coated; colour shall be approved by GE/EIC. All joints / gaps shall be filled with metal putty / primer before powder coating. Welding process shall be of MIG or MAG and complete. Inner hard rubber shoe shall be provided to each leg. Rest all as per drawing and as directed by EIC.

Table Dining ORs steel FD-165(M) having specifications as under:- Overall size of frame shall be 1600mmx750mmx760mm. Frame shall be made of SS 304 grade pipe. Legs/ bottom side stiffener shall be made of 50 mm Square pipe SS 304 grade 1.6 mm thick. 2x centre stiffener of size 50mmx25mm Rectangular SS 304 pipe with 1.6 mm thick shall be provided on bottom side stiffener and top frame shall be made of 50mmx25 mm rectangular SS-304 pipe with 3xstiffner provided on top as shown on drawing or directed by EIC. Note - Extension of Top frame /stiffener shall be provided up to and below the top rest all as directed by EIC. Top shall be made of 1.6 mm thick SS sheet 304 grade with skirting 75 mm and further folding up to 20 mm. Overall size of top shall be 1900mmx900mm. Standard quality PVC shall be provided each legs. All SS surface shall be duly buffed, rest all as directed/approved by EIC.

Form W/o back FD-77(M) having specifications as under:- Irrespective what is shown on Drawing overall size shall be 1900mmx 375mmx450mm. Frame shall be made of 304 grade SS 25 mm Square pipe 16 gauge thick duly buffed. Long rail/short rail to be provided both bottom and top with centre stiffener at bottom and top stiffener below seat as directed by EIC complete with Adjustable shoe. Seat shall be made of 50 mm thick 32 density PU Foam with 12 mm thick ply wood with SS Clamp for fixing with Screw complete and seat cover shall be made of rexine cloth complete as directed by EIC.

Charpoy Plytop FD/MAP-II/01 having specifications as under:- The complete frame work shall be made of CRCA box section with 16 gauge thick as per IS-4923. 12mm thick BWR grade plywood and shall be fitted on top with shrunken nuts/bolts and washer as directed by EIC. Head rest and foot rest shall be detachable. Irrespective of what is shown in drawing, The Height of head rest & foot rest shall be 750 mm and 540 mm respectively, the head board shall be covered with 18mm thick pre-laminated HDHMR board BSD with 0.8 mm thick PVC edging with edge bander machine, colour of board shall be approved by GE/EIC. 6x No’s MS Cleat welded to head rest to support the board .All metal work shall be powder coated; colour shall be approved by GE/EIC. All joints / gaps shall be filled with metal putty / primer before powder coating. Welding process shall be of MIG or MAG and complete. Hard rubber shoe shall be provided to each leg. Rest all as per drawing and as directed by EIC.

Rack steel with 6 tier FD-1038 having specifications as under:- All dimensions shall be of as shown on drawing. The body, shelves etc. Shall be made of 1mm thick CRCA steel sheet. Welding process shall be of MIG or MAG. 40mmx40mmx4mm thick angle shall be used in fabrication. All steel Ext surface shall be best quality powder coated painting of approved shade over a coat of red oxide primer after preparation of steel surfaces. Rest all as per drawing and as directed by EIC.

Almirah large steel FD-1031 having specifications as under:- The overall size shall be of 920mm (W) x 485mm (D) x 1985mm (H) made of CRCA sheet. The body, legs & shelves shall be made of 1mm thick CRCA sheet. Welding process shall be of MIG or MAG. Locking arrangements shall be provided with duplicate keys. Steel cabinet lock Cum Handle (maruti lock) with rod shall be provided in shutters irrespective of what is shown on drawing. 04 No’s adjustable shoe shall be provided. All steel surfaces external/internal shall be powder coated. Contrast colour powder coating shall be used for painting and colour shall be approved by GE/EIC. All joints (gaps) shall be filled with putty/primer before powder coating. Rest all as existing trade pattern/Drawing or as directed by EIC.

Locker Bed side steel FD-1029 having specifications as under:- All dimensions shall be of as shown on drawing. The body legs & shelves etc. Shall be made of 1mm thick CRCA steel sheet. Welding process shall be of MIG or MAG. Irrespective of what is shown on drawing Steel cabinet lock Cum Handle with rod (maruti lock) shall be provided in shutters. Adjustable shoe shall be provided to each leg as per godrej pattern. All steel External surfaces shall be hammertoe painting of approved shade over a coat of red oxide primer after preparation of steel surfaces. Contrast colour shall be used for painting and colour shall be approved by GE/EIC. All joints (gaps) shall be filled with putty/primer before painting. Rest all as per drawing and as directed by EIC.

Part - III TP Furniture

Receptacle PVC(dustbin) large TP having specificatios as under:- Supply only Receptacle PVC(dustbin) large All PVC work shall be of standard class thick polymer plastic with capacity not less than 120 ltrs with lid and wheel for long life. Rest all as approved by EIC

Rack Rifle for 20 Rifle for 5.56 mm INSAS Rifle TP having specifications as under:- "Supply only Rack Rifle for 20 Rifle for 5.56 mm INSAS Rifle Material of construction of RIFLOC semi-welded assembled body includes MS sheets of 12 & 14 SWG confirming to IS 2062 along with MS angles 65mmx 65mmx6mm & 25mmx25mmx5mm conforming to IS808. In house fabricated & assembled unique 6 lever locks with a set of 2 SS keys. Locking facility is as such that the locking 6 leaver lock handle and operating handle are locked simultaneously. Finish shall be anti-rust coating of primer and finally painted with 2 coat of 25 DFT each OLIVE Green colour designed U shaped PVC pads shall be provided in each groove of the rack to avoid any kind of scratches on rifles. Overall weight of rifle rack shall be between 90-100 Kgs."

Rack storage closed type with mechanised drive type TP having specifications as under:- Supply only Rack storage closed type with mechanised drive type Mobile storage compactor with mechanised drive type, 1 bay 4 bodies (single face static =1,single face movable =1,double face movable=1) each body having shelves making 5 compartment , size of single face body 1980mmx 450mmx 900mm and double face body 1980mmx 900mmx 900mm. Complete body shall be made of 0.8 mm thick powder coated CRCA. Fixing shall be done by the contractor. rest as approved by EIC

Bench workshop TP having specifications as under:- Supply only Bench workshop overall dimension of workshop bench shall be 3000 mm (w)x750mm(D)x850mm(H) . Frame shall be made of 50mmx50mmx3 mm thick MS Square pipe. Top shall be made of 50 mm thick ply consists of 2 pieces complete with connecting parts with 4 mm loose rubber sheet. cabinet size shall be 575mmx600mmx700mm -4 nos. each drawer load capacity shall be 60 kgs . Static load capacity 1500 kgs. Slider 3 mm thick with SS ball bearing slider guarantees 3 years. 100 % galvanized material high zinc coating -120 GSM with powder coted finish complete

Chair dining TP having specifications as under:- Supply only Chair dining Timber shall be first class teakwood, seasoned free from knots & cracks with moisture content permissible limit as per IS-281-1973. Overall size shall be 450 mm(wide)x450mm(deep)x950mm(H) and 450 high up to seat . Seat shall be made out of 50mm thick PU foam 32 density pasted with adhesive on 12mm thick BWR grade plywood covered with fabric. The seat shall be fixed over 25mmx65 mm thick side and front rails and screwed from wood stopper with 30 mm long screw complete. PVC rings shall be screwed to each leg. Fabrication of seat shall be done at BSO Yard. All wooden portion shall be smoothened to apply best quality PU polish glossy finish with spray machine as per trade pattern furniture. Right angle bracket/connecter shall be provided to each legs. Polish work shall be done at BSO Yard. Rest all as approved and directed by EIC.

Table centre two tier TP having specifications as under:- Supply only Table centre two tier Centre table designed with sturdy SS pipe frame in a sleek chrome finish for modern and durable appearance .The table top shall be made of 25 thick PLPB, lower shelf shall be made of 18 mm thick PLPB offering additional storage or display space. Table top size shall be of 1200mm x600mm rest all as trade pattern or as directed by EIC.

Bath Mat PVC TP having specifications as under:- "Supply only Bath Mat PVC Bath mat will have 5 legs with high quality finish. Bath mat shall be made of heavy duty polymer material. Bath mat shall be of jumbo size. Rest Quality and size shall be approved by EIC/GE before supply. Rest all as per existing trade pattern."

Table verandah TP having specifications as under:- Supply only Table verandah overall size of table shall be 750x750 mm dia. ,made of 18 mm MS powder coated round pipe and 8 mm glass on top. 5 mm thick PVC Indian wicker weaving over the MS frame, colour shall be approved by EIC. Rest all as directed/approved by EIC.

Chair Verandah TP having specifications as under:- Supply only Chair Verandah Chair made of 18 mm MS powder coated round pipe frame with 5 mm thick PVC Indian wicker weaving on seat and back colour as per approval of EIC but without cushion. Seat height 450 mm from the floor Rest all as directed/approved by EIC.

Table 4'x2' with glass top Supply only Table 4'x2' with glass top shall be made two tiers. Size of table shall be 1200mmx600mm . Frame shall be made with teak wood with teak face plywood bottom, 10 mm thick glass shall be provided on top. Complete wooden work shall be melamine polished complete.

Book case steel TP having specifications as under:- Supply only Book case steel overall size of book case shall be of 825mmW 375mmDx1650mmH. The body, legs & shelves etc. shall be made of 0.8mm thick CRCA steel sheet. Welding process shall be of MIG or MAG. 4 glass door and flip hinges. Clear Glass shall be of 4 mm thick Locking arrange shall be individual with handle. 4x adjustable shoe shall be provided to bottom of book case.

Chair Computer TP having specifications as under:- Supply only Chair Computer Medium Back Chair, PU Adjustable Arms Gas lift, Nylon Base, net Back & seat foam net tapestry with standard quality wheels and with Synchronic multi lock. Rest all as approved by EIC or as sample held with BSO yard.

Chair Revolving Executive TP having specifications as under:- Supply only Chair Revolving Executive Medium Back Chair, PU Adjustable Arms Gas lift ,Nylon Base , net Back & seat foam net tapestry with std quality wheels and with Synchro multi lock . Rest all as approved by EIC or as sample held with BSO yard .

Chair School with Hand rest TP having specifications as under:- Supply only Chair School with Hand rest student room chair designed with ergonomically contoured PU moulded seat & back for enhanced comfort during long sitting hours. Upholstered in high quality fabric tapestry. PU arms with a full folding writing pad made from 18 mm thick PLPB with dimension 535mmx300mm. Chair frame shall be powder coated.

Book case display TP having specifications as under:- Supply only Book case display complete body shall be made of 18 mm thick pre-laminated HDHMR Board. Finish shall be matt laminate finish. Overall dimension shall be 1800mmx 450mmx2100 mm .locking mechanism for extra security. Rest colour as approved by EIC.

Sofa set 3 seater TP having specifications as under:- Supply only Sofa set Three seat Sofa shall be made of 1st class teak wood seasoned with permissible moisture content as IS-287. Sofa seat shall be made with 100 mm thick PU foam of 40 Density and the best quality fabric as approved by EIC. Loose cushion of size 300mmx300mm shall be provided with each sofa seat. PVC hard nylon shoe shall be provided with each legs .Overall size of three seat shall be 1730 mmx725mmx530mm. Soft wood and MS Zigzag spring shall be used in under structure.

Sofa set Single seater TP having specifications as under:- Supply only Sofa set Single seat Sofa shall be made of 1st class teak wood seasoned with permissible moisture content as IS-287. Sofa seat shall be made with 100 mm thick PU foam of 40 Density and the best quality fabric as approved by EIC. Loose cushion of size 300mmx300mm shall be provided with each sofa seat. PVC hard nylon shoe shall be provided with each legs .Overall size of single seat shall be 670mmx725mmxx530mm. Soft wood and MS Zigzag spring shall be used in under structure.

Table office Executive TP having specifications as under:- Supply only Table office Executive overall size of table shall be of 2100mmx900mmx750 mm. Top shall be made of 25 mm thick PLPB with 3x Drawer pedestal unit movable with central locking device and with telescopic channel in pedestal. MS Powder coated collaborate loop legs. Modesty Panel of size 18mm thick PLPB with 2mm thick PVC edging. Wire manager shall be provided on table top. Table shall be provided with side storage unit with pneumatic height adjustable table.

Stool steel adj TP having specifications as under:- Supply only Stool steel adjustable Stylish and comfortable stool revolving for residential/institutional uses. Seat shall be made with high quality leatherette tapestry .back rest, cushioned back for ergonomics support, CP steel pipe frame .integrated footrest for add comfort. Round chrome plated base for stability. Anti-sip rubber ring under base to protect flooring. Adjustable height with a smooth gas lift. Rotation 360 degree swivel function. Weights cap up to 120 kgs. Seat height shall be (adjustable) 22" to 32”, seat diameter 16-17” and back height from seat 10-12" and base diameter 16-18 ". Rest all as directed or as approved by EIC.

Table office officer TP having specifications as under:- Supply only Table office officer overall size of table shall be of 2300mmx 1000mmx750 mm. Top shall be made of 54 mm thick Pre-laminated MDF with 2mm thick PVC edging. Under structure shall be supported on MS Powder coated brackets and cross beams. 25mm thick pre-laminated MDF gable end or main table desk is supported on side storage unit and other side 3 drawer pedestal. Pedestal configuration and using laminate board. Modesty panel shall be made of 18mm thick Pre-laminated MDF. Complete table shall be provided with Side Storage unit having 3 drawers including extension unit of size 1400mm x 550mm x 750mm with back unit of size 1500mm x 600mm x 750mm complete.

Couch Bench TP having specifications as under:- Supply only Couch Bench overall size shall be 1820mmx690mmx790mm. Bench shall be three seater with powder coated arms and legs. Perforated seat and back with foam cushion with leather rite tapestry .Rest all as per TP pattern.

Cafeteria Table TP having specifications as under:- Supply only Cafeteria Table Base with foldable top support frame .SS 202 frame with buffed finish leveller provided at bottom to provide better stability .stopper provided both end to lock and unlock the top. Overall dimension of frame shall be 1500mmx600mmx737mm. Legs shall be made of 20x40 mm x1.6 mm thick SS 202 grade rectangular pipe; beam /reinforcement shall be made of 50 mm SQ x1.6 mm thick SS 202 grade pipe. Lazeez top 1800mmx800mmx25 mm thick shall be provided.