REPAIR AND MAINT TO WALL SURFACE PERIODICAL SERVICES PLUMBING PLASTERING FLOORING JOINERY SANITARY FITTING AND CERTAIN MISC WORKS IN ZONE D AND E OF AGE BR I AREA UNDER GE MIS MHOW

Amount

S&F in repairs GI tubing 15mm bore medium grade with all fittings ,fixed to walls /ceiling or laid in floors complete all as specified

S&F in repairs GI tubing 20mm bore medium grade with all fittings ,fixed to walls /ceiling or laid in floors complete all as specified

M&L for cutting chases not exceeding 10cm for concealed water tubing, pinning in, making good to facings where required and pointing in CM 1:3 and making good the disturbed surface all as per existing complete all as specified

S&F in repair rotational moulded polythylene water storage tank of 500 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete

S&F in repair rotational moulded polythylene water storage tank of 1000 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete

S&F in repair rotational moulded polythylene water storage tank of 2000 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete

S&F in repair rotational moulded polythylene water storage tank of 5000 litres capacity, double layered (cylindrical / vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 25mm bore complete

S&F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) complete all as specified

S&F in repair PVC tank Cover for OHT of 500/1000 Litres capacity complete all as specified

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete

M&L for Brick work with sub class 'B' bricks with using Modular size Brick , straight or curved on plan exc 6m mean radius built in CM 1:6 including dismantling of existing brick work complete all as specified

All as per item No 11 above but except bricks dismantling of existing brick work complete all as specified .Note:Serviceable bricks obtained from dismantling shall be reused.

M&L for brick work in CM 1:4 using sub class `B ` modular half brick work straight or curved on plan exceeding 6.0mtr mean radius including demolition of old bricks complete all as specified

M&L for rendering 15mm thick plaster in CM (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement mixed with Dr fixit pidiproof LW 200ml/50Kg of cement including takin down existing cement plaster complete all as specified and directed. Note: WPC shall be measured and paid separately under relevant item.

Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or equivalent as approved.

M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement including takin down existing cement plaster complete all as specified

M&L for rendering 15 mm thick in CM 1:6 on wall/ concrete surfaces finish even and smooth without using extra cement including takin down existing cement plaster complete all as specified

M&L for rendering 5mm thick on concrete surfaces in cement mortar 1:3 finished on even and smooth without using extra cement as in ceiling, chajja etc. including takin down existing cement plaster complete all as specified

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of white wash complete all as specified

M&L for preparation of new plastered surface and applying two coats of exterior weather proof water base emulsion paint white/coloured over a coat of primer complete all as specified

M&L for preparation of wall surface and application of following water based epoxy resin coating as a dampness treatment for internal wall including filling of cracks with CM (1:4) and making the surface smooth and finish in repair complete all as specified. (a) Complete removal of treatment / plaster (as required ) on internal walls and preparation of surface and rendering with CM(1:4) for application and making the surface wet . (b) Applying first coat of Dr. fixit Dampguard in ratio (1U base:1U hardner:1U water) in one direction and leaving the coat to dry for 6 to 8 hrs. (c) Applying second coat of Dr. fixit dampguard in ratio (1U base:1U hardner:1U water) in perpendicular direction to the first coat applied and leaving the surface to dry for 24 hrs. Material: Dr. fixit Dampguard or other equivalent as approved by GE.

M& L for applying two costs of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted ) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm in new plastered surfaces complete all as specified

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer white or tinted complete all as specified

M&L for preparation of new surface of wall and applying three coats of white wash complete all as specified

M&L for preparation of newly plastered surfaces of ceiling,chajja and applying three coats of white wash complete all as specified

M&L for preparing new surfaces of ceiling and applying three coats of white wash complete all as specified

M&L for preparation of old decorated surface of wall including brooming, down, scrapping down smoke spot and stopping nails mark by filling Birla white putty and applying two coats of cement based paint over one coat of primer complete all as specified

All as per item No. 27 above but one coat of cement base paint

M&L for preparation of new plastered wall surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade over and including 1 to 2mm thick wall care putty over a coat of priming coat with exterior primer applied complete all as specified Make :- Nerolac -Excel, Asian - Apex, Burger - Weather coat antidust, Dulux - Weather shield. Note: (a) Application of Primer and emulsion shall be carried out through airless spray machine (Mechanical method). (b) Wall care putty shall be done properly to receive smooth surface of wall (c) Work shall be carried out to buildings upto four story (d) Quoted rate shall be inclusive for scaffolding ,safety equipements as required at site

M&L for complete removal of existing treatment from old decorated surface of wall and applying two coats of 100% Premium arcylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance , dirt resistance exterior paint of required shade over and including 1-2mm thick wall care putty over a coat of priming coat with f exterior primer applied complete all as specified Makes :- Nerolac -Excel, Asian - Apex, Burger - Weather coat antidust, Dulux - Weather shield. Note: (a) Application of Primer and emulsion shall be carried out through airless spray machine (Mechanical method). (b) Wall care putty shall be done properly to receive smooth surface of wall (c) Work shall be carried out to buildings upto four story (d) Quoted rate shall be inclusive for scaffolding ,safety equipements as required at site

M&L for prepration of new plastered surface of wall and applying two coats of distemper with superior quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour including 1-2mm thick wall care putty over a coat of priming coat with interior primer applied complete all as per Manufacturer's specification. Note: Distempering shall be carried out through airless spray machine (Mechanical method )

M&L for prepration of old decorated surface of wall and applying one coat of distempering with superior quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, all as per Manufacturer's specification. Note :-Distempering shall be carried out through airless spray machine (Mechanical method )

M&L for preparation of old decorated surfaces of wall by washing rubbing down and stopping of distempered surfaces and applying one coat of oil bound distemper complete all as specified.

M&L for complete removal of existing treatment from old decorated surface of wall including brooming, washing, rubbing scraping down, Smoke spot, moss, efflorescent salts, trading oil, greasy spots and stopping nails marks and applying three coats of white wash on walls complete all as specified

All as per item No. 34 above but on ceiling.

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in CM 1:6 including dismantling of old tiles complete all as specified

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.06 sqm, as in vertical surfaces such as skirting / dado etc. set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and inclluding 10mm thick backing coat in cement mortar in CM 1:4 including dismantling of old tiles complete all as specified

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6 and including dismantling of old tiles complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed in CM 1: 6 and including dismantling of old tiles complete all as specified.

M&L for glazed ceramic coloured tiles 450X350X 6mm to 7mm thick as in vertical surface as in skirting/dados , set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 10 mm thick rendering in CM 1:4 and including dismantling of old tiles complete all as specified.

M&L for glazed ceramic coloured tiles 300x200mmx6mm to 7mm thick as in vertical surface as in skirting/dados , set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 10 mm thick rendering in CM 1:4 and including dismantling of old tiles complete all as specified.

M & L for machine cut kota stone slab in flooring 20-25mm thick laid over and including 15mm thick screed bed in CM 1:6 & cement mixed with pigment to match the shade of slab including rubbing and polishing including dismantling existing kota stone slab of any description complete all as specified

M&L for 20mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding /rounding ) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing with white cement (1:2) mixed with marble dust and admixture of pigment to match with shade of granite including dismantling existing granite slab of any description .

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate , 75mm as in sub base including demolition of existing concrete all as specified

M&L for chequered cement concrete tiles with grey cement and pigment of size 40cmX40cmX25mm thick (Glosy finish) ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 including dismantling of existing tile of any description all as specified

M&L for machine pressed rubber moulded precast concrete interlocking paver block (glosy finish) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid on 50 mm thick stone dust cushioning laid dry to the profile including dismantling of existing paver block complete all as directed. Note: Sand cushioning shall be measured & paid seperately under relevant item.

M&L for machine pressed rubber moulded precast concrete interlocking paver block (glosy finish) any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigment laid on 50 mm thick stone dust cushioning laid dry to the profile including dismantling of existing paver block complete all as directed. Note: Sand cushioning shall be measured & paid seperately under relevant item.

M&L for Stone dust filling under floors 50mm thick including watering and consolidation.

M&L for rounding of edges of stone slabs such as granite,kota stone etc as in steps, cooking platform and other similar situations complete all as specified

Taking down chowkat or frame area not exceeding 1.5 Sqm each with shutter (without taking off shutters from frames)

Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each

Taking down shutters of any description area exceeding 1.00 Sqm but not exceeding 2.0 Sqm all as specified

Taking down shutters of any description area not exceeding 1.00 Sqm all as specified

Taking down Shutters of any description exc 1 sqm and n. exc 2 sqm each and refixing in the same opening after repairing complete all as specified

S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with MS square tube,edges will be paited to match with prelam sheet supplying & fixing in opening as per specification and drawings including all fixtures shown on drawings complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; stile &rails having one side feathered edge and on other side 10mm 90^0 bent edge,Paneling of prelam PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.given SSR 2010 complete all as specified and directed.

S & F aluminium anodised barrel tower bolts of extruded section 100 mm long

S & F aluminum anodised alloy handle 100 mm cast type

S&F Butt hinges, medium weight, cold rolled mild steel, 75mm size

S&F second class HardWood shutters 35mm thick, plain framed panelled shutter factory made (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified

S&F 30 mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24(a) ; supplied and fitted to chowkats all as specified Note :- Glass pane and wire mesh shall be measured and paid separately under relevant item

S&F 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24(a) ; supplied and fitted to chowkats all as specified Note :- Glass pane and wire mesh shall be measured and paid separately under relevant item

S&F Plain, solid, straight chowkhats and frames of second class Hard Wood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified

M&L for cutting holes in brick/block wall exc hlaf brick but n.exc one brick built in cement mortar of any description for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B1 as required complete all as specified.

S&F mild steel bands, straps, support or stays for rainwater ventilating pipes including bolts if required, hook and eye, hold fast, wall ties hooks for hanging fans, plain angle etc all as specified

S&F aluminium alloy anodised sliding door bolt 300 mm long with hook and staple(bolt type) and fixing clip of sheet coat or extruded section and fixing bolt and sliding bolts of extruded section.

S & F aluminium anodised barrel tower bolts of extruded section 150 mm long

S & F aluminum anodised alloy handle 150 mm cast type

S&F in repairs aluminium alloy anodised sliding door bolt 300 mm long with hook and staple(bolt type) and fixing clip of sheet coat or extruded section and fixing bolt and sliding bolts of extruded section.

S & F in repairs aluminium anodised barrel tower bolts of extruded section 150 mm long

S & F in repairs aluminum anodised alloy handle 150 mm cast type

S & F stainless steel butt hinges 100 mm long.

S&F Butt hinges 100mm size, medium weight, cold rolled mild steel.

S&F in repairs Continuous (piano) hinges, mild steel, bright finish or electro galvanised with width of flaps (When open) 30 mm

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.5sqm in each panes including hacking out old glass all as specified.

All as per item No. 76 above but for figured glass pin-headed type.

S&F sheet glass 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 sqm in each pane including hacking out old glass complete all as specified .

S&F figured glass pin-headed type 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 sqm in each pane including hacking out old glass complete all as specified .

S&F glazing with 4.8mm thick sheet glass ordinary quality including rubber beading /gasket around glass panes and hacking out old glass complete all as specified.

S&F stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S & F in repair galvanised Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples complete all as specified

S&F in repairs stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified

S&F mild steel 300mm ordinary rat tail rod springs including roller and roller plate complete

S&Fin repairs mild steel 300mm ordinary rat tail rod springs including roller and roller plate complete

M&L preparation of new wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel over coat of pink primer.

M&L for preparation of old painted surfaces of wood/wood based materials exc 10cm in width or girth and applying one coat of synthetic enamel paint all as specified.

S & F in repairs 150mm floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor.

S & F in repairs aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851to 1000 mm in width and of weight between 61 to 80 kg

S & F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty.

S&F 40mm dia, cupboard knobs with nut, screw & washer of brass, polished

S&F Hasp & staple of 100mm size , mild steel, wire type, stove enamelled black, including bolt to hinge plate with screws.

S&F in repairs Hasp & staple of 100mm size , mild steel, wire type, stove enamelled black, including bolt to hinge plate with screws.

S&F in repairs mild steel work (Tubular, square/rectangular hollow section) as in purline, rafter and wind ties, cleat roof trusses etc including securing bed plate, iron fillets for securing wire mesh etc including all necessary drilling bolting or riveting, etc, and similar work conforming to IS 1161-1979 dge St-240 complete all as specified.

S&F in repairs 0.50mm thick (total coated thickness) pre-colour, pre profiles Galvalume/zincalume sheets of required colour and design having tensile strength of 550 Mpa,zinc colour coating AZ-150 as in roof ,wall cladding,north light curves,fixed with zinc coated self drilling fastener including EDPM washer complete laid with one corrugation side laps and min 150mm end laps laid to slope all as per manufacturer/profile maker instructions complete all as specified

M&L for cutting channels, grooves or rebates n. exc 15cm in girth, and trimming surface with or without reinforcement for inserting galvalume sheet on wall and necessary coping with PCC 1:2:4 type B0 over the sheet along the wall complete all as specified

M&L for preparation of new steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer all as specified

M&L preparation of old steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer all as specified

M&L for 50 mm thick PCC 1:3:6 type C2 using 20mm graded stone aggregate as in plinth protection , finished even and fair complete including demolition of existing concrete all as specified

S&F in repairs Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading all as spd.

S&F in repairs aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) including powder coating of any colour (Thickness or powder coating not less than 50 micron).complete all as specified

S&F coloured powder coated aluminium strip of size not less than 0.90 m long and 30 mm wide with brush lining fixed at bottom of wooden/aluminium door to cover gap between door and floor complete all as specified and directed.

S & F in repairs false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns pinhole 8mm thick semi perforated square edge tile having NRC (Noise Reduction coefficient) of 0.50 (minimum) Light reflectance of 85% (minimum). Non combustible as per BS: 476 (PART-4), fire performance as per BS : 476(PART 6 & 7 ), humidity reistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, in true horizontal level suspeded on interlocking metal powder coated T-Grid of hot dipped galvanized iron section on Silhouetter profile, rotary stitched double webbed white with 1 mm reveal profile (White/black), comprising of main-T runner of size 15 x 32mm of length 3000m, cross - T of size 15 x 32 mm of lenght 1200mm and secondary intermediate cross-T of size 15 x 32 mm of lenght 600mm to form grid module of size 600 x 600 mm, from ceiling using galvanized mild steel item, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 19 x 19mm of length 3000 mm to be fixed on periphery wall /partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall S.S. screws. The work shall carried out as per specifications, drawing and as per directions of the Engineer-in-Charge .

S&F in repairs 32mm dia PVC waste pipe fixed to WHB,sink,Urinal complete all as specified and directed.

S&F in repairs 32mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 45gms) for kitchen sink complete all as specified

S&F 15mm bore pillar taps, half turn cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified

S&F in repair 15mm bore pillar taps, half turn cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified

S & F in repairs 10 litres capacity PVC flushing cistern, low or high level, with inlet, ball valve, syphonic action type, float and handle, PVC Flush pipe, pull or push type including brackets complete all as specified

S & F in repair CP brass fancy type 15mm bore bib taps half turn, screwed down , and screwed for iron pipe or for brass ferrule complete all as specified

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm

S & F in repairs CP fancy type stop valves ,cast copper alloy concealed type , screwed both ends for iron pipe or for union of 15mm bore complete all as specified

S&F in repair CP mixer for WHB mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified and directed.

S & F in repairs Wall mixture cromium plated continental non telephonic wall mixer shower hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.

S & F in repairs angle stop valves one way, brass chromium plated, fancy type, fixed to iron pipe or for unions 15mm bore

S&F in repairs health faucet with flexible pipe of one metre length including stand complete all as specified

S&F in repair fancy type chromium plated two way bib cock of 15mm bore two way bib cock screwed for iron pipe or brass ferrule etc complete all as specified

S & F in repairs CP Brass Fancy type shower rose 125mm dia with shower arm 30mm long of approved quality complete all as specified

S& F in repair CP toilet paper holder complete all as specified

S&F in repairs PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement complete all as specified

S&F in repairs 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified

S & F in repair PVC body bathroom cabinet with mirror fancy type made out of 5.5mm thick mirror of size 350 x 450mm complete

S&F in repairs brass chromium plated corner glass shelf 5mm thick with bracket complete all as specified

S&F in repairs shelf glass assembly consisting of 5.5mm thick sheet glass,shelf 120mm wide with CP bracket guard and railing 600mm long.

S&F in repairs soap dish (oval) type mild steel chromium plated of size not less than 50mm dia complete.

S&F in repair Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified

S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc complete all as specified and directed.

S & F in repairs CP towel ring 150mm dia complete all as specified.

S&F in repair Plastic water closet seat cover, white colour, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device complete all as specified .

S&F in repairs 25 mm dia stainless steel curtain rod as approved by Engineer-in-Charge

S&F in repairs 25 mm dia stainless steel decorative brackets with necessary fixing arrangements complete all as specified

S&F in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified

S & F in repair vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white colour with integral foot rests (excluding flushing cistern and flush pipe) including provision of cement concrete bedding complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white colour (excluding fixing bolts, flushing cistern & flush pipe) incl Plastic water closet seat, white colour, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device.

S & F in repair wash hand basins, white colour,vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of waste pipe,waste coupling etc complete all as specified

M&L for preparation of old concrete / PCC tile surface of any description by brooming with coir / wire brushes and cleaning and washing the floor surface with water to remove the fine dust and applying two coats of Lacquer polish (1001) chemical mixed with pigment all as per Manufacturer's instruction complete all as specified and directed by Engineer-in-Charge

M & L for writing buliding No, date of periodical done etc (Block, Roman, Italic or Indian) with white synthetic enamel paint not exc 15 cm height over 30cm dia black synthetic enamel paint base on wall surface complete all as specified and .Note: Total no. of letters shall be not exceeding 15nos and measured as one unit

M&L for cutting of shubs,vegetation including small trees,grass,bush,weed and roots under growth and saplings n.exc 30cm in girth completely from buildings wall / roof /chajja etc of any height upto 14m including providing necessary scaffolding/ ladder,safety devices etc as required at site and removing vegetation to a distance n.exc 50 m ,clearing off from site complete all as specified and directed. Note:Each building shall be measured as one unit

General Notes:- (a) Work shall be carried out to buildings upto four-story height ,accordingly quoted rate shall be inclusive for necessary scaffolding/ ladder,safety devices etc as required at site

m/s ajay chandil

NIDHI CONSTRUCTION

M/s Himgiri construction