8178 WELCOME MAINTENANCE AND CERTAIN REPAIRS AT RAFIYA MANZIL AND DOCKYARD HOUSE UNDER AGE B/R-II UNDER GE (NW) KUNJALI

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and rubbishing off the premises etc complete all as specified and as directed..

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and disposing off complete all as specified and as directed.

M&L brick work with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

M&L rendering 15mm thick in CM 1:6 on brick surfaces, finished even and fair on walls complete all as specified and as directed.

M&L rendering 10mm thick in CM 1:3 on concete surfaces as in ceiling finished even & smooth without using extra cement in ceiling.

M & L rendering 20mm thick in two coats(15mm inner coat 5mm finishing coat) on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound on finishing coat in the proportion as mentioned in manufacturer's instructions all as specified and directed. (Water proofing compound to be measured and paid for separately).

Supply only integral water proofing compound complete all as specified.

Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down with water complete all as specified and as directed.

M&L for applying 1 to 2 mm thick wall care putty (JK/Birla) for making the surface even & smooth all as specified.

M&L newly plastered/puttied surfaces of wall and applying two coat of oil emulsion distemper complete all as specified.

M&L for preparation of old decorated surfaces of wall and applying two coat of oil emulsion distemper all as specified and directed

M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper all as specified and directed

M&L for preparation of newly plastered surfaces of ceiling and applying two coat of oil emulsion distemper complete all as specified.

M&L for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weeather acrylic base paint (100 % acrylic) over one coat of cement based primer all as specified.

-do but one coat only.

M & L applying two coats of Plastic emulsion paint, on puttied surfaces,

M&L for preparation of old decorated surfaces of wall and applying one coat of plastic emulsion paint all as specified and directed

M & L for preparation of roof/wall surfaces and applying two coats of raincoat acrylate with flutyne weather coat paint including cracks upt to 2mm thick filling all as specified and as directed.

S & Fix repairs QPS-WHT-7753P180UF SPMZ of Jaquar or equivalent make of Cera, Hindware etc rimless bowl with side flush cistern for couples water closet UF soft close seat cover,hinges,single flush cistern, fitting and fixing accessories, size 420x710x810mm, P or S trap complete all as specified and directed.

S & F in repairs Water Closet cat part No 20089(S-10) ,Cat part No 21038 Cistern and seat cover of Hindware or equivalent make of Jaquar, Cera etc ,hinges,single flush cistern, fitting and fixing accessories, size 380x700x820mm, P or S trap complete all as specified and directed.

S & F in repairs floor mounted coupled water closet cat log No LYS-WHT-38751P cat log No LYS-WHT-38201 cistern,of Jaquar or equvalent make of Cera, Hindware etc bowl for coupled WC with UF soft closeseat cover, hinges fixing accessories set and accessories set, size 380x660x765mm, P or S trap complete all as specified and directed by Engr-in-Charge.

S&F in repairs Vitreous China wash down water closet pan ( pedestal pattern) , white (excluding fixing bolts, flushing cistern and flush pipe) fixed in repairs

S&F in repairs water closet squattin pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe).

S&F in repairs, Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

S&F in repairs, Plastic water closet seat, black or white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device suitable for items like ser No 22 & 23 above.

Supply only cast iron 'P' trap 100mm dia

S/F in repairs PVC valveless syphonic action type ,flushing cistern Low level white, with inlet ball valve ,float and handle 10 Ltr capacity including brackets.

S&F in repairs Flush pipe of Polyethylene of low or high density or PVC 32 mm dia. for low level cistern

S & F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair under counter wash hand basin vitreous china Cat part No CNS-WHT-705 of Jaquar or equivalentwhite/coloured size and design as directed by the Engr-in-Charge including fixing with fastner/ bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified .

S&F in repair table top wash hand basin vitreous china Cat part No JDS-WHT-25909 of Jaquar or equivalentwhite/coloured size and design as directed by the Engr-in-Charge including fixing with fastner/ bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified.

S&F in repair wash hand basin vitreous china white (flat back) of size 550x400mm including bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified,

S&F stainless steel sink with drainage board made out of stainless steel 1mm thick sheet for kitchen with plug, washers and waste pipe incl bedding in cement mortar to dward wall or incl fixing cantilever brackets and connecting union to pipe overall size 915 x 460mm and bowl size 410 x 330 x 160mm fixed in repair.

S&F Glossy finish stainless steel double bowl with single drainage board made out of stainless steel 1mm thick sheet for kitchen with plug, washers and waste pipe incl bedding in cement mortar to dward wall or incl fixing cantilever brackets and connecting union to pipe overall size `1160x510mm and bowl size 340x400x200mm fixed in repair.

S&F Glossy finish stainless steel Single bowl with out drainage board made out of stainless steel 1mm thick sheet for kitchen with plug, washers and waste pipe incl bedding in cement mortar to dward wall or incl fixing cantilever brackets and connecting union to pipe bowl size `710x460x230mm

S & F Stainless steel wire baskets SS 304 or equivalent with full extension sliding mechanism used as drawer with solft closing fittings so as to slide open and shutt with one smooth movement. Front and side covering with prelaminated BWR marine plywood

S & F Stainless steel multipurpose baskets SS 304 or equivalent with full extension sliding mechanism used as drawer with solft closing fittings so as to slide open and shutt with one smooth movement. Front and side covering with prelaminated BWR marine plywood

S & F Stainless steel cutlery unit,cup and saucer unit baskets SS 304 or equivalent with full extension sliding mechanism used as drawer with solft closing fittings so as to slide open and shutt with one smooth movement. Front and side covering with prelaminated BWR marine plywood

S & F Stainless steel thali basket SS 304 or equivalent with full extension sliding mechanism used as drawer with solft closing fittings so as to slide open and shutt with one smooth movement. Front and side covering with prelaminated BWR marine plywood

S & F Stainless steel undersink basket SS 304 or equivalent with full extension sliding mechanism used as drawer with solft closing fittings so as to slide open and shutt with one smooth movement. Front and side covering with prelaminated BWR marine plywood

M & L in repairs 18 mm thick factory made acrylic board suitable for cupboards, drawers etc of any colour

Auto clouse hinges stainless steel for full overlap for cup board shutters etc

Stainless Steel cabinet/ door/drawer handle decorative handles suitable size variying from100 to 200 mm

S & F in repairs SS Magnetic door catcher for drawer, cupboards etc

S&F Stainless steel locks suitable for cupboards, drawers etc

S&F in repairs plate rack made of stainless steel, 910 x 1220X0.25 mm including fixing as per manufacturers instruction.(SSKPR-318 or equivalent)

S&F in repairs plate rack made of stainless steel, 910 x 910X0.25 mm including fixing as per manufacturers instruction.(SSKPR-317 or equivalent)

S & F in repars wall mixer with provision for overhead shower with 115mm long bend pipe on upperside, connecting legs & wall flanges. Cat Log No FUS-29273UPR of Jaquar or equivalent.

S & F in repars wall mixer 3 -in- 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flanges (without hand & overhead shower). Cat Log No FUS-29281 of Jaquar or equivalent.

S&F in repair Maze overhead shower 300x300mm square shape single flow (Body and Face plate stainless steel with chrome finish) with rubit cleaning system cat log No OHS/CHR-1639 of Jaquar or equivalent.

S&F in repairs fancy type CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed Cat log No FUS-29001 of Jaquar or equvalent.

S&F in repairs fancy type cock suitable for counter top wash basin 15 mm dia, screwed for iron pipe and fixed Cat log No FLR-5357N of Jaquar or equvalent.

S&F in repairs fancy type cock suitable for sink 15 mm dia, screwed for iron pipe and fixed Cat log No CON-349KN of Jaquar or equvalent.

S&F in repairs fancy type cock suitable for sink with raised J shaped swinging spout (wall mounted model 15 mm dia, screwed for iron pipe and fixed Cat log No CON-357KN of Jaquar or equvalent.

S&F in repairs fancy type bib cock 15 mm dia, screwed for iron pipe and fixed Cat log No CON-037KN of Jaquar or equvalent.

S&F in repairs fancy type two way bib cock 15 mm dia, screwed for iron pipe and fixed Cat log No CON-041KN of Jaquar or equvalent.

S & F in repairs angular stop cock 15 mm dia , screwed for pipe and fixed Cat log No CON-053 KN of Jaquar or equivalent.

S & F in repairs Stainless steel towel ring round with round flange Cat Log No CAN-1121BN of Jaquar or equivalent.

S & F in repairs Stainless steel single towel rail 600mm long Cat Log No CAN-1111NM of Jaquar or equivalent.

S & F in repairs Stainless steel swivel towel holder twin type Cat Log No CAN-1115N of Jaquar or equivalent.

S & F in repairs Stainless steel swivel towel rack 600 mm long without lower hangers but with 3 hooks Cat Log No ACN-1181FHN of Jaquar or equivalent.

S & F in repairs Stainless steel toilet roll holder Cat Log No ACN-1151N of Jaquar or equivalent.

S & F in repairs Stainless steel soap dish holder Cat Log No ACN-1131N of Jaquar or equivalent.

S & F coner glass shelfwith bracket Cat log No CAN-1173 of Jaquar or equivalent.

S & F in repairs Roller venetion blinds type made out of standard cloth of approved texture with necessary accessories etc complete

S & F in repairs 8 mm to 10 mm thick wooden flooring and skirting including spung/polythene complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets etc all as directed.

M&L for POP false ceiling using 600X900x12 mm thick plaster of paris with gypsum binder sheet decorative type including two coats of plastic emulsion paint and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50x25 mm spaced at 750 mm centre, secondary joist of size 75X20 mm fixed to main joists spaced at 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2 M C/C, complete all as specified and directed.

GI frame work for seamless ceilinjg comprising of GI perimeter channel 0.55mm thick across the intermediate with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to soffit at approx 900 mm centre to centre with GI cleat and steel expension fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips channel at 457 mm centre to centre.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L for false ceiling made out of 600x600x 4 mm thick ( non asbestos fiber cement designer/coloured)ceiliing board / tiles deep panel.

S&F 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall vertically with screws and C/C deistane 30 CM to make PVC frame as per specification and drawing.

S&F PVC wall /ceiling paneling consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

S&F UV PVC wall /ceiling paneling consisting of 3 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including suitable back support.

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame)

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame)

Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each

Taking down shutters of any description not exc 1 sqm each

S&F 2nd class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified.

S&F 35mm thick factory made 2nd class HW rail & stile plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I), kiln seasoned and chemically pressure treated

S&F 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side.

S&F 30mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b) ; supplied and fitted to chowkhats of Second class hard wood.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified

S&F in repair powder coated aluminium (minimum 25 micron thickness of coating) of various section as required for doors, sliding windows/ partion/Ventilator etc including fixing and making the frames for hinges glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement,in sliding shutter, sealant etc all as specified and as directed by Engr- in- charge.

S&F in repair aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 102, 7.5 mm thick all as specified and as directed by Engr- in- charge.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple etc.

S&F 12mm thick prelaminated medium density particle board,interior grade, prelaminated both side with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.

S&F Stainless steel butt hinges 100 mm.

S&F 75 mm Stainless steel butt hinges and fixed.

M & L for MS flat for hold fast. Conforming to Fe-290-0 or Fe-165

S&F in repairs 140 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified

S&F in repairs 18/19 mm thcik prelaminated partical board exterior grade prelaminated one side with lamination and other side balancing white lamination fixed with screw to frame work cupboard etc including 6 mm thick teak wood beading all around complete all as specified and directed.

S&F 12mm thick plywood ,grade bwp type BB, fixed with screws to timber frame as in paneling/partition complete all as specified and as directed..

M&L 0.9mm thick decorative texture finish laminate type 1 , of surface finish colour and pattern as approved fixed with adhesive as per makers instruction complete all as specified and as directed.

S&F 1st class hard wood moulding as in cornices , joints of wall panelling board etc sectional area not exc 6 sqcm incl necessary french polishing complete all as specified and as directed..

S&F 2nd class HW plain fillets clean sawn square, rectangular or triangular in section, sectional area exc 13 but n.exc 25 sqcm fixed with nails all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.

S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; walkj ways, railings, frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified .

S & F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS -1161 1979 grade St-240

S&F in repair 12mm thick, toughened glass including itching etc for door shutters, partitions, shelves etc with and including fitting and fixtures such as glass handles ss studs, fittings for door pivots etc complete all as directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.

M & L cement concrete type B2 1:2:4 (40 mm graded aggregate ) as in foudations, fillings and mass concrete.

Dismantling stone slab and tiles of of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

Rounding to edges of stone slabs on edge, such as in steps, cooking platform and making grooves for lining and other similar work complete all as specified and directed.

M&L for pre painted machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour incliuding filling the joints with rising surface vibrator etc complete all as specified.

M&L for sand under floors or in foundations including watering and consolidation, spreading and levelling in layers n exc 25 cm thick and well ramming including watering as required.

M&L for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down tarfelt and 15 mm thick screeding in cement mortar 1:4 finished even and smooth without using extra cement including mixed with water proofing compound as per manufacturer instructions (WPC shall be measured and paid separately).

M&L PCC 1:2:4 type B-0 (using 12.50 mm graded aggregate) cement concrete as a leveling course on roof surfaces and coping etc.

M&L for applying a coat of bituminous primer 0.25 Kg/Sqm on prepared surface of plaster as per manufacturer's instructions, manufactured by the same agency of APP membrane. After applying of bituminous primer applying evenly a coat of bitumen 85/25 at the rate of 1.2 kg per sqm incl cleaning surfaces. Providing and laying five layered 4 mm thick APP (Atatic poly propylele) modified polyester reinforced water proofing membrane with minimum weight of 4.60 Kg/Sqm, as specified here-in-after. The APP membrane shall be laid using torch on application with minimum 100 mm side overlap and 150 mm end overlap. The laying of membrane shall be got done through an authorised applicator of manufacturer of the membrane. The APP membrane shall be taken upto minimum 200 mm on vertial surfaces. The edge of the membrane shall be sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slope towards rain water pipe outlet . over the APP membrane provide a polypropylene/polyester, non woven geotextile fabric of 150 gram/Sqm complete all as specified and directed.. Notes :- (i) Irrespective of lap the net covered area shall only be measured and paid (ii) The quoted rate shall be deemed to be inclusive of bituminous primer and a coat of bitumen 85/25 at the rate of 1.2 Kg per Sqm for APP membrane omplete all as specsified and directed by Engineer-in-Charge.

M&L for 50 mm dia and 350 mm long medium grade GI pipe spouts with wire gauge on inside mouth to be fixed before water proofing treatment of sunken slabs by cleaning RCC slab surface floors and walls by wire brush and rendering 6 mm thick in CM 1:4 mixed with integral WPC on uneven surface to make it even. Fill it water and check for dampness and seepage, all junctions points of side walls where CI/GI pipe are passing shall be sealed with epoxy mortar. Apply two coats of polymer modified cementious water proofing coating of minimum thickness of 1 mm each layer as per manufacturers instructions on floor & walls (upto 100 mm above FFL) and spray coarse sand on surface when the second layer is still sticky. Apply 20 mm thick plaster in CM 1:4 mixed with integral WPC of approved make on floors and walls including rounding of corners and junctions stoping towareds spouts. All pipes laid in sunken portions shall be covered with 50 mm thick PCC 1:3:6 all around after painting with anti corrosive black japan paint on GI/CI pipes. Test the water proofed area by filling water at least 72 hours and tested for leakage/seepage for the entire satisfaction of GE. After above said treatment apply two coats of hot blown bitumen @ 1.5 Kg /Sqm for each coat and laying 50 micron black polythene film in floors complete all as specified and directed. (Note : If leakage/Seepage occured after filling water at least 72 hours, the above said treatment will be re-done completely)

M&L for cement concrete 1:3:6 type C-1 , (20 mm graded stone agg) as in foundation filling and sunken floors etc all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land

Dismantling plain or corrugated steel/AC roof sheets any gauge, thickness, including Nainital or similar pattern roof covering all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws as specified.

Demolition and breaking up drain pipes salt glazed ware, reinforced cement concrete) set in cement mortar 100 mm

S & F 110mm bore PVC (SWR) pipes single socketed in any length wirh rubber ring joints fixed to walls.

All as per item No. 131 but for but 75 mm bore

S & F PVC (SWR) bends 110 mm

All as per item No. 133 but for but 75 mm bore

S & F PVC (SWR) branch piece 110 mm single Y

All as per item No. 131 but for but 75 mm bore

S & F PVC (SWR) vent cowl 110 mm

All as per item No. 137 but for but 75 mm bore

M&L in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement75 mm dia.

Taking down PVC wastage and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed by EIC

S&F 160mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with ms clamps all as specified and directed.

S&F 160mm dia bore PVC (SWR) bends any radius

M & L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate ) as in plinth protection and similar works 75mm thick finished fair and smooth without using extra cement complete.

Taking up or down existing GI water tubing complete with all fittings of 15 mm bore

Taking up or down existing GI water tubing complete with all fittings of 20 mm bore

S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed by Engineer-in-Charge.

S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed by Engineer-in-Charge.

S & F UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, celing etc or in floors etc 15 mm bore pipe

All as per item No. 148 but for but 20 mm bore

S&F PVC connections 15 mm size with PTMT nuts of length 600mm

S & F Curtain road 20mm bore antick coated aluminium.

S & F brackets suitable for above item

S &F brass Key lock round knob type(locking mechanisum) easy push button facility for locking inside suitable for all doors all as specified and as directed Make Godrej and equivalent.

S & F SS grating suitable for 100/75 mm bore all as specified and as directed.

Dismantling water tank of capacity exc. 500 Ltrs but n.exc. 1000 ltrs.

S&F rotational moulded polythylene water storage loft tank tank of 1000 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I.

French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint with necessary scafolding for high rise bldgs etc all as specified and directed.

M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of newly wooden surfaes of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surfaces.

M&L for preparation of old painted wooden surfaes of any description over 10cm width or girth and applying one coat of synthetic enamel paint including external window with necessary scafolding for high rise bldgs.

S&F 4mm thick bakelite sheet with decoratie choice laminated on both side complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified.

S&F 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete.

S&F 3mm thick sheet glass plain ordinary quality and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete.

S & F in repairs 4.2 mtr sensor sliding glass door (2 meter opening) of heavy duty can take 120 Kg/Per load (120 kg x 2 door glass leaf/shutter) with all accessories with cover consisting of aluminium base plate track (with 2nd rail) 4.2 mtr, 1 set of rack belt (7000mm) & 1 pair floor guide & accessories including top cover (double leaf), rubber strip below rail line for noiseless operation, Motor sensor including electrical wiring upto point of installation, cat -5cable for photocell & push button and conduit required for installation of accessories etc all as specified and as directed.

VIVANSH RAWAT CONSTRUCTION (BID ID -3347424)

Laxmi Sales (BID ID -3344840)

A.R. ENTERPRISE (BID ID -3347960)

H R Enterprises (BID ID -3344714)

MADHU ENTERPRIZES (BID ID -3347693)

GANGAJAL (BID ID -3350908)