REPAIR FLOORING WALL PLASTERING, DOORS, WINDOWS, SANITARY FITTING, SUNKEN FLOORING, CHAJJAS, FACIA, PATH, PLINTH PROTECTION, ROOF TREATMENT IN STN UNIT AREA AT AWC UNDER AGE B/R IV OF GE (AWC) MHOW AT MES COLONY, DEMO BTY, ARO AND EME WKSP.

Amount

Taking down cement plaster any description.

M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick walls or concrete surfaces in two layers (10 mm thick bottom layer & top layer 5mm thick), mixed with water proofing compound in top layer by weight of cement or as per manufacturer instructions, finished even & fair without using extra cement all complete as specified and as directed.

Supply only Integral water proofing compound.

M&L for rendering 15 mm thick cement plaster on other than fair surfaces of brick work in cement mortar (1:6) complete all as specified and as directed.

M&L for rendering 5 mm thick cement plaster on ceiling cement mortar (1:3) complete all as specified and as directed.

M&L for applying three coats of white washing on new plastered surfaces of ceiling including preparation complete all as specified and as directed.

M & L Preparation of newly plasterd wall surface apply two coat of cement based paint over a one coat of wall primer plastered and other surface with alkali resistant priming paint complete all as specified and directed.

M & L preparing of newly plastered surfaces of wall , pillasters, cornices etc and applying two coats of coloured acrylic water emulsion paint over a coat of precoated treatement as manufacturer instruction complete all as specified.

M & L for preparation of newly plaster surfaces of Walls and applying two coat of distemper oil emulsion over a coat of Primer complete all as specified and directed.

M&L for three coats of white wash on newly plastered surfaces of wall including preparations complete all as specified and as directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards /slabs/blankets, any thickness including cover fillets complete.

S&F Solid PVC Ceiling/Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing specified and directed complete.

5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

S & F Anodised aluminium sanp grid frame work of size 605 x 605 mm for flase ceiling securing with 4 mm dia GI wire of 1.20 mtr centre to centre tying to roof members or bolting with self taping screws including all necessar y arrengements complete all as specified and directed.

M & L 12 mm thick Plain colour PVC sheet as in ceiling or wall penalling fixed with screws as per manufactur's instructions complete all as specified and directed.

M&L for welding in repairs hinges , handle , lock , tower bolt , sliding bolt ,rat rail , peg stay ,peg set ,not exc 6mm and not exc 9 mm in thickness. by welding etc complete all as directed by engineer incharge

S & Fix door or window frame with shutter at any description with aluminum sections, coloured powder coating not less than 5 micron, and fixing in positions including all necessary cleats, lugs, beading, and jointing arrangements, complete all specified & directed.

S & F in Anodised aluminium door shutters aluminium section coloured powder coating not less than 50micron,weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing handles 2 Nos in each door, hinges,lock anodised aluminum snap beading screws and powder coated aluminum single panel door of average 1 Smq to to 4Sqm of Each door size as required as per site with the following specification and making good the adjacent surfaces complete all as specified and as directed:- (a) Cross section of xchowkhat frame 101.60x44.45x2mm thick. (b) Cross section of hanging and meetng style 83x44x2mm thick. (c) Top rail of cross section 114x44x2mm thick. (d) Bottom rail of cross section 114x44x2mm thick. (e) Locking rail (middle rail ) of cross section 83x44x2mm thick. (f) 4mm thick tinted glass make Modi, float including rubber gasket for fixing of glass panel. (g) Aluminum handle eisc type -02 Nos per shutter ( inside & out side). (h) Aluminum door stopper heavy duty-01 Nos per shutter. (i) Aluminum tower bolt 200mm long-01 Nos per shutter (inside). and 4 Nos of hinges of 100 mm size of ISI mark (j) 7 lever of ISI marked Lock with key superior quality make and type as approved by GE openable both from inside & out side -01 Nos per shutter.

S & F in Anodised aluminium window and ventiletor shutters aluminium section coloured powder coating not less than 50micron,weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing handles 2 Nos in each door, hinges, ,lock anodised aluminum snap beading screws and powder coated aluminium sliding glazed windows/ventilater with three track , three shutter sliding with following specification and making good the adjacent side etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge.Make : Jindal or Equilent. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick shall be fixed in all around by CP screws with @ 300 mm c/c for fixing of windows frame.screws. (ii) Three way track for sliding shutters of cross section 91.8mmx31.75mmx1.1mm thick with self lock arrengements. (iii) Sliding shutter frame of c/s 40x18x1mm thick. (iv) 4 mm thick tinted glass superior quality with rubber gasket for fixing of glass pane. (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter at end -01 Nos. (vii) Sliding rollers per shutter - 02 Nos. (viii) Stainless steel wire mesh of 0.36 mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos. (Ix) Cromium plated screw 300 mm C/C for fixing of frame with wall. (x) Aluminium grill DG 104, DG 02

Taking down and re-fixing of old aluminum doors Shutter in same opening with necessary required repairs and fittings including galss rubber bedding door frame rubber bedding and glazing clips(Glass pan, floor hydrolic spring handles, mortice lock and tower bolt will be measured and paid seperately) area n.exc 4.00 sqm each complete all as specified and directed

Taking down and re-fixing of old aluminum window in same opening with necessary required repairs and fittings including galss rubber bedding door frame rubber bedding and glazing clips (Glass pan and wire gauge will be measured and paid separately are n.exc 2.00 sqm each complete all as specified and directed

S&F in repair for alumium window/cladding by filling silicon weather proof seailent of approved complete all as specified and directed

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminum alloy sheet foundation bore main body with stainless steel cover, governing pivot make of brass other parts made of mild steel heavy duly and ISI marked complete all as specified and directed

Taking down shutter of any description n exc. 1 Sqm each complete.

Taking down shutter of any description exc. 1 Sqm but n. exc. 2 Sqm each complete.

Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete.

Taking down chowkhats or frame exc 1.5 sqm but not exc 4 sqm with shutter (without taking off shutter frome the frame )

M & L 2 nd class hard wood Plain solid , straight chowkhats and frames wrought, framed on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as directed and directed.

M & L for PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as in hold fasts including necessary use and waste of form work complete all as specified and directed.

M & L 2 nd class hard wood 35 mm thick Plain , framed panelled shutters ( any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as speciifed and directed.

S & F 30 mm thick Flush shutters , solid core construction, with block board core and plywood face panels one face is covered with decorative face veneer with lipping/ frame to match fixed to chowkats complete all as specified and directed.

S & F 2 nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

S & F 2 nd class hard wood 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (with sash bar) edges divided into squares, with plain chamfered or rounded , mitred and rebated sash bars of any numbers ,beads, for securing glass etc, sizes of members of shutters as in windows and ventilators as specified in SSR Part-I, section 8, clause 8.24 (b) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete.

S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2004 and as directed by GE/Engineer-in-Charge.

S & F 75 mm size butt hinges medium weight, cold rolled mild steel complete all as specified and directed.

S & F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete .

S & F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete.

S & F aluminium 150 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete.

S & F 150 mm size aluminium handles cast type, anodised ISI marked complete

M & L 150mm length floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor complete all as specified and as directed

S & F 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.

Taking down Aluminium door shutters exc 1 sqm and n exc 2 Sqm each and refixing in same opening after resetting ,, resecuring or easing & adjusting including necessary bolts and nuts, securing rods , washers etc complete all as specified and directed .

S & F in repairs Galvnised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, wooden beads or galvanised wire staples etc complete all as specified and directed.

M & L Preparation of Old wood painted surfaces of any description , not otherwise description, over 10 cm width or grith apply one coat of synthetic enemel paint (ordinary tint) complete all as specifed and directed.

M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified.

S & F in repair 25mm dia Powder coated curtain rod fixed with modren bracket of any type or any design as approved by Engr -in Charge complete all as specified and directed

S&F in repairs 50 mm polished hard wood knobs fixed with screws complete all as specified and directed

S&F fixed in repair hasp and staple aluminium anodised including bolt to hinge plate and fixed with screw 150mm long. complete all as specified and directed

S & F in repairs 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete.

S & F in repair light coloured vitreous china WHB white oval shape of 500mmx400mm (minimun) on new brackets excluding taps waste china & plug including bracket etc complete all as specified . Note :- Pillar tape shall be measured as supply only under respective item

S & F in repairs PVC connection 15 mm dia 600 mm long with PTMT nuts at both ends complete all as specified and directed.

S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600 mm long complete.

S & F in repairs Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm x 330 x 160 mm complete all as specified and directed.

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm X 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete.

S & F( in repairs) Vitreous chaina wash down water closet pan (pedestal pattern), white including pedestrial pan and trap, including seat cover for pedestial pan and connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed. Make plumber or equlent.

Demolition lime Concrete (un-reinforced) of any descriptions in any position complete all as specified and directed.

M & L for appline one prime coat acrylic polymer modified water proofing coating(Brushbabd of FOSROC or equivalent) and over that two coats of acrylic polymer modified two component elastomeric water proofing membrance coating (Brush band of fosroc mate or equivalent) complete all as specified as per manufacturers instruction as directed by engineer-in-charge. Note :-1 . This item shall only be executed through level 4 or level 5 certified and authorised applicator of the company. 2. A warranty for 5 yerars in the form of written agreement shall be submitted by the contractor. 3.The rate quoted by the contractor shall include all the provision mention in this item including notes. 4. Applying 15-20mm thick protection plaster 1:3(Cement : Sand) ration on vertical and horizonal areas admixed with Dr.Fixit Pidiproof LW Plus(Conforming IS 2645 2003) @200ml per bag of cement.

M & L PCC 1:5:10 type E-2 using 40 mm graded stone aggregate as in mas concrete complete all as specified and directed.

M & L for water proofing treating on wall in 02 coats(separate coats) with polymer latex based chemical having hydroshield properties(Technology) and superior anti carbonation properties (consists of polyalkelene fibre network with excellent water repellency)with film thickness of 120mm per coat all as specified as per manufacturers instruction as directed by Engineer-in-charge directed. Note :-1 . This wk shall be executed throught authorised applicator from the company. 2. A warranty for 5 year shall be submitted by the contractor to the dept. 3.Item includes preparation of surface i.e cleaning with wire brush washing of surfaces etc.

M & L for crack filling(Crack of width > 2.5mm) with acrylic based crack fillers with uniband based technology(shrinkage free propertions) including preparation of crack i.e cutting the edges of crack in V-shape to receive the filling all as specified by manufacturers instruction in 02 coats complete as per the directions of Engineer-in-charge. Note :-1 . This wk shall be executed throught authorised applicator from the company. 2. A warranty for 5 yerar shall be submitted by the contractor tothe dept. 3.Item includes preparation of surface i.e cleaning with wire brush washing of surfaces etc.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M & L non-skid / mat finish coloured joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:4 complete all as specified and directed.

Description same as per item No 63.00 above but in vertical surface including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L vitrified ceramic tiles 09 to 10mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified and directed

Description same as per item No 65.00 above but in vertical surface including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L glazed ceramic coloured tiles, 450mmx300mm x 7 mm thick on vertical surfaces such as dados , skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in Cement mortar 1:4 complete all as specified and directed. Note :- Tiling shall be as in patches or of any size or any description , any colour, any location or all as directed by Engineer - in -Charge.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed

M&L Granite stone 18- 20 mm thick(of any type) work (table rubbed and polished) for wall lining (Veneering to wall) and laid on cill of parapit wall over 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colour as per direction of GE

Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust, etc

Brushing neat cement slurry with 3.0kg of cement per sqm.

M&L for 20-25 mm thick machine cut mirror polished kota stone slab flooring with Kota stone not less then 550X550mm size, laid over cement screed of 15mm thick in CM 1:4 laid & jointed with gray cement slorry mixed with pigment to match the shade of the slab including

Description same as per item No 72.00 above but in skirting size not less than 550mmx 100mm x 11-12 mm thick all as specified and directed.

M & L for grinding and polishing of existing terrazo cast in situ floor with Mirror polishing all as specifiied and directed.

Taking up or down existing 15 mm dia steel tubing and connection and removing complete.

Taking up or down existing 20 mm dia steel tubing and connection and removing complete.

Supplying, fixing, 15mm dia bore galvanised steel water tubing medium grade with all fittings fixed to walls and ceilings or laid in floors, complete.

Supplying, fixing, 20 mm dia bore galvanised steel water tubing medium grade with all fittings fixed to walls and ceilings or laid in floors, complete.

S & F 16mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc.

S & F 20mm outer dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc.

M & L for reparing of RCC projection, chajjas,roofs,facia, colum etc by necessary preparation i.e scrapping, cutting, chiseling, derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1: 1-1/2: 3) using 12.5 mm graded crushed stone aggregate and reinforeced with welded mesh of weight exc 2Kg per sqm but n.exc 3Kg/sqm with or without facia and finished exc 5sqm each and thickness of RCC using coarse sand in patches area not each and thickness of RCC member n.exc 70mm at any height complete all as specified. Note : - Cost of formwork and welded mesh shall be deemed to be included.

25 mm thick Sand filling below blocks including watering and consolidation Spreading and levelling all as specified and as directed.

Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L chequered cement concrete tiles 25mm thick of size as approved by GE set jointed and pointed in neat cement slurry in floors with white cement & pigment laid over 20 mm screed in CM 1:6 complete all as specified.

M&L for green broda marbal 18to20mm thick machine cut stripps of size not less than .90 mx .04 m , bedded and jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of green baorda stone including cutting & polishing complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exc. 15 Cm thickness (below/above ground level) including floor finishes all as specified and directed

M&L for PCC 1:3:6 type C2 using 40mm graded aggregate 75mm thick as in plinth protection, finished concrete surfaces even and smooth without using extra cement

Demolition of Brick work built in cement mortar including all quoins arches pillars etc complete all as specified and directed

M&L Brick work with sub class 'B' modular brick straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed

M & L for Roughening / taking down existing roof treatment surfaces including plaster over old concrete roof by picking, sweeping clean and washing down with water to remove dust etc. all as specified and directed.

M & L Brushing neat cement slurry with 3 Kg of cement per Sqm for bonding of old concrete surface to new concrete/plaster surfaces complete.

M & L Cutting out cracks to 6 mm wide 'V' section in existing roofs or terrace (if cracks > 2.5 mm wide), cleaning out, wetting, grouting with and including chemical compound SUPER LATEX of DR. FIXIT of PIDILITE INDUSTRIES LTD or SBR LATEX of STP LTD,, water and cement in the proportion of (1:4:7) by weight mix or as per manufacturers instructions all as specified and directed complete.

M & L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) mixed with integral waterproofing chemical PIDIPROOF LW of DR FIXIT of PIDILTE INDUSTRIES LTD or STP No. 1 (LIQUID) of STP LTD @ 200 millilitre per 50 Kg per cement, as in padding on roof surface for correcting / making proper slope on roof, and finishing the surfaces fair and even without using extra cement complete all as specified. Note:- Liquid WPC shall be measured and paid separately.

M & L 10 mm thick rendering in CM (1:3) mixed with integral water proofing chemical compound @ 200 mililitre per 50 Kg cement as per manufacturers instructions over concrete surface and finishing the surface fair and even without using extra cement complete all as specified. Note:- Liquid WPC shall be measured and paid separately.

Supply only liquid water proofing compound.

Water proofing treatment on "Non approachable / non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer all as specified and directed complete by GE. (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidised bitumen based solvent primer 0.3 Kg / Sqm. (iii) APP based polymeric membrane of 3 mm thick reinforced with polyster non wove fabric laid with 100 mm over laps sealed and bounded to the surfaces by 'torchon' method. (iv) Applying coat of bitiminous aluminium paint @ 200 Gram / Sq M (minimum) in two coats all as specified and as manufacturer instruction complete.

Hacking out old broken glass pane (any thickness , size, quality or description) from steel frame glazed with putty or fixed with beads.

M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane.

M & L for 3 mm thick figured glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane.

S & F in repair 110 mm dia bore. PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in wall complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in floor/ trenches complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in wall complete all as specified and directed.

S & F in repair 110 mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed complete all as specified and directed.

S & F in repair 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed complete all as specified and directed.

S & F in repair PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete.

M&L for mirror polished rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete as directed.

M&L for cutting out of marble/ granite stone slab in suitable size for oval type wash hand basin inculding cutting grinding and polishing of edges in required shap and design all directed and approved by GE.

S & F Pillar taps cast copper alloy, fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, supplied and fixed in repairs, complete.

S & F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, supplied and fixed in repairs complete.

M/S Ashish Construction

Jamna Constructions