PROVN OF 02 X TRG SHED UNDER GE 865 EWS AT LEH

Amount

Excavation in trenches n.exc 1.50m wide and n.exc 1.50m in depth and getting out in hard/dense soil complete all as specified and directed.

Returning,filling in ,including spreading,levelling ,watering and well ramming in layers not exc 25cm complete all as specified and directed

Removing excavated material n, exe 50m and depositing where directed at a level n, exe 1.5 m above the starting poit complete all as specified and directed

M & L for PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundation,filling and mass concrete all as specified.

M&L formwork for rough finished concrete surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and sofits (if any) of foundations and plinth beams and similar works: verticals or to batter complete all as specified and directed.

M&L form work for rough finished concrete surfaces to sides and soffits of floor or roof beam ,beam haunchings ,girders, bresummers,lintles, cantilevers,shelves including supports ,overhanging, etc. also splays between floors and beams,etc complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape as reqd , incl crancking bending ,spirally for hooping columns hooking ends and binding with and including mild steel wire not less than 0.9 mm dia.

M&L for mild steel TMT bars 6mm dia to 8 mm dia and over upto incl 10mm cut to length bent to shape as reqd ,as in stirrups and spacers complete all as specified and directed.

M&L RCC M-25 (20 mm graded crushed stone Aggregate) in foundations, inclucing rafts, footings, foundations beams : plinth beams: bases for column, etc " basement slabs , under reamed piles and mass concrete complete all as specified and directed.

M&L Cement concrete M-25 (20 mm graded Aggregate) in Beams , Cantilievers, bressummers, lintles over 1.5 m span complete all as specified and directed.

M&L Hardcore with boken stone of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, water and rolled /rammed to a true surface complete all as specified and directed.

Material and labour for 100 mm thick plain cement concrete type D-2, 1:4:8 (Using 40mm graded crushed stone aggregates) as in sub base complete all as specified and as directed.

M&L for Cement concrete flooring cement concrete 1:2:4 type B0 (12.5 mm crushed stone aggregate) finish even and smooth using extra cement as specified and directed.

M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and as directed

M&L for 15mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed

M&L for applying two coats of cement base paint on new plastered surfaces including preparation of surfaces complete all as specified and directed.

S&F Structural steel works as in tubular roof trusses, purlins, Rafter, vertical posts, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular pipe, channel or flat sections) including distance pieces, cleats , riveting incl bending and welding, conforming to Fe-410W Gde E-250 quality A complete all as specified and directed.

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles as necessary, gusset plates, cleats, MS Flat, MS plate, rivetting etc n.exc 10 kg each brackets, conforming to FE 290 Gde E-165 complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of Green colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/ridge/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for two coat of synthetic enamel paint over one coat of red oxide priming including preperation of new steel surfaces over 10 cm width or grith not otherwise described complete all as specified and directed..

M & L for 75 mm thick PCC 1:3:6 type C-2 using 20mm graded crushed stone aggregate as plinth protection finished even and smooth with out using extra cement complete all as specified and directed.

M&L Forming Contraction (Dummy) joints 50 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection complete all as specified and directed.

M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with nails to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed.

Ditto all as item Ser No 25 above but on ceiling complete all as specified and as directed

M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section.complete all as specified and as directed.

M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section.complete all as specified and as directed.

M&L for Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle complete all as specified

S&F for 35mm thick 2nd class hard wood plain framed factory made paneled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, Supply and fixed to chowkats , complete all as directed by Engr-in-charge.

S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165 complete.all as specified and as directed by the Engr-in-Chage

Material & labour PCC (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) as in hold fast , bed block and like complete all as specified and as directed by the Engr-in-Charge.

M&L sheet glass 6.3 mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed.

S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as directed by Engr-in-Charge.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F in repair 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed

M&L for preperation of new or previously untreated wooden surface any description of any description over 10cm in width or girth and applaying two coat of synthetic enamal paint over a coat of Pink primer complete all as specified and as directed complete all as specified and as directed.

M&L for Cement concrete type B-2,1:4:8 (40mm graded crushed stone aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc complete all as specified and directed..

M&L for Chequred cement concrete tiles 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments layed over and including 20mm thick cement screed base (1:6) and all as directed by Engr-in - charge.

Point wiring complete with 1.5Sq.mm nominal area of copper conductor multi stranded FRLS PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead all as specified and directed for the followings:-

One light/exhaust fan point controlled by one way switch.

One switch socket outlet 6 Amps, 230 volts point on Same board.

One switch socket outlet 6 Amps, 230 volts point on independent board.

All as item No 42 above, but using cables 4 Sq mm size complete all as specified and directed by Engr -in-charge.

Supply and fix of lamp holder insulated body with back plate complete all as specified and directed by Engr -in-charge. .

Supply and fix of Switch piano flush button single pole 6 Amps 230 volts one way complete all as specified and directed by Engr -in-charge.

Supply and fix of switch Socket outlet 5 pin 6 Amps flush type.230 volts complete all as specified and directed by Engr -in-charge. .

Supply and fix of switch Socket combination out let multi purpose 5 pin 6 Amps and 16Amps 230 volts complete all as specified and directed by Engr -in-charge.

Supply and fix of Ceiling rose, surface Bakelite three terminals complete all as specified and directed by Engr -in-charge.

Supply & Fixing LED lights fitting 1 x 20W, 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr -in-charge.

Supply & Fixing LED light fitting 1X9 W/ 1X 10 W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr -in-charge.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of following sizes :-

25 Sqmm,4 Core.

16 Sqmm,2 Core.

Supply & fix sheet metal enclosures for DB's Single pole and Neutral 8 way with 200 Amps rated bus bar complete all as specified and directed by Engr -in-charge.

Supply and fixing MCB 240 V 10 KA 'C' Curve SPN 63 Amps complete with connection testing and commissioning complete all as specified and directed by Engr -in-charge.

Supply and fixing MCB 240 V 10 KA 'C' Curve SP 5-32 Amps complete with connection testing and commissioning complete all as specified and directed by Engr -in-charge.

M&L for Earthing complete with galvanized steel earth plate electrode 600mm x600mmx 6mm thick buried directly in ground. (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below normal ground level, connected to galvanized earth lead wire 4mm dia by GI watering pipe with funnel and wire mesh and 15mm dia protection pipe earth work etc complete all as shown in electrical plate No 5 of MES plate No. 6 complete all as specified and directed by Engr -in-charge.

Supply and fixing LED Street light fitting 35 watt 230V AC out door type with high pressure die cast aluminium housing and heat resistant complete with driver , lamp bracket with impact and corrosion resistant including thermal management in multiple optix complete with IP65/66 protection complete all as specified and directed by Engr -in-charge.

S&F GI Bracket made out of 32/40mm dia medium grade pipe 1.2m length to bend to shape 120 degrees for fixing on pole and suitable for 35 Watt strret light with 02 Nos clamps of flat iron (40 x4mm) nuts, bolts and washers including painting with two coats of aluminim paint over a coat of primer complete all as specified and directed by Engr -in-charge.

Supply and fixing bus bar chamber size 600x 450x 300 mm outdoor type made out of MS sheet 3.0 mm thick mounted on angle iron frame dully painted with two coat of synthetic enemelled paint over a coat of primer and comprising of three phase and Neutral aluminum bus bar 400 amps mounted on insulators, and space bar to be provided for mounting of approx 25 Nos SPN / MCB including provisioning of foundation complete all as specified and directed by Engr -in-charge.

M&L for crushed stone sand cushioning to UG cable, provide with the layer 8 cm before and 15 cm after laying and stretching jointing and testing the cable complete all as specified and directed by Engr-in-Charge. Note : Punned thickness of 18 cm shall be measured and paid.

Supply and laying of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-2 flate size 250 mm x 180 mm x 40mm , complete all as specified and directed

M/S Praveen Kumar and Sons

M/s Aman Enterprises

M/S SHAMSHER ALI SUFI

M/S BALI CONSTRUCTIONS

Mehar Enterprises

M/S RIGDOL CONSTRUCTION