ADDITION AND ALTERATION OF GAURAV STAMBH AT NAVAL DOCKYARD UNDER GE NW KUNJALI

Amount

Demolition of stone/brick masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles complete all as specified and directed.

Materials and labour for brick work with sub class 'B' bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:6) complete all as specified and directed.

Material & labour for brick work with sub class 'B' bricks (old Size) straight or curved on plan to any radius in half brick thick wall built in CM 1:4.

Taking down cement plaster or cement lime plaster on brick on stone walls etc including raking out joint, hacking for key, scrubbing down with water etc complete all as specified.

Material & labour for rendering 20 mm thick pre polymer modified ready mixed cement based plaster in two coats 12 mm thick base coat and 8 mm thick finishing/final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required incl curing required complete all as specified and directed.

Material & labour for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weather proof acrylic based paint (100% acrylic) over one coat of cement based primer with necesssary scaffolding for high rise blds etc all as specified and directed.

Material & labour for Providing and applying double layer with Chowgule Koster dachflex super crack sealer or technocommercial equivalent make for repairing the cracks of the external wall areas.

Material & labour for preparation of old plastered and cracked surfaces of walls external , applying two coats of non dilutable Dr.Fixit Raincoat over a coat of Dr.Fixit primeseal primer having dft of 110 micron and elongation of >200% on external surface as per manufaturer instruction complete as specified and directed by Engineer-in- charge.

Material & labour preparation of old decorated surfaces of walls, soffits, roof facia and applying one coat of weather proof acrylic based paint (100% acrylic) with necessary scafolding for high rise bldgs complete all as specified and as directed

Demolition of Stone slabs and tiles/ Interlocking paver blocks of any description or thickness in floors, aprons laid, bedded and pointed in any mortar and removing rubbish off the premises (outside MD land) etc complete all as specified and directed

Material & labour for Hard wear stone (of any type) granite stone slab 20mm thick in flooring machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified.

Material & labour for Makrana white marble work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, floors and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble complete as specified and directed by Engr-in-Charge.

Material & labour for machine pressed pre-cast concrete interlocking coloured paver block of M35 grade shape and size conforming to IS-15658-2006 of 60mm thickness with grey cement and pigment laid dry over stone dust or sand base and compacted using vibrator complete all as specified and directed.

Material & labour machine cut Kota stone (greenish colour, mirror polished) slab flooring 18 to 20 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and mirror polishing, over & incl 20mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.

Supply & fixing 3 mm thick aluminium composite panel cladding plain of approved colour/shade to beam/column/slab incircular/rectangular shape inbcluding cutting, notching, bending to shape as required jointing with silicon gel of approved colour & aluminum tubular hallow section 25 x 25 mm not exceeding 900 mm C/C on exceeding column/beam/slab to hold APC cladding etc (Note : colour/pattern of ACP sheet shall be given by GE).

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

Material & labour for Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes gate stops, parts of ranges, balusters and similar articles exc 5 Kg Each all as specified.

Material & labour for preparing new or previously untreated surface of steel of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

jalandhara construction (BID ID -3177427)

Anil Industrial Corporation (BID ID -3171670)

SHREE JAGDISH FURNITURE CO. (BID ID -3170710)

Rohit Enterprises (BID ID -3171948)