Repair/Maint/replacement of flood lights, glow sign board, post top lantern, under water lights, bollard light etc with allied work under GE (West) Mathura

Amount

M&L for Point wiring complete with 1.5 sqmm single core FRLSH PVC insulated cable with multi stranded copper condutor in and including PVC conduit 20mm dia and thickness not less than 1.5mm, ISI marked with all accessories for surface or concealed conduit as directed at site incl chase cutting for one light/fan point controlled by one one way switch including MS sheet sunken box concealed on wall duly painted inside and outside with one coat of red oxide primer and two coats of black bituminous paint with 3mm thick hylum brand bakelite sheet cover for fixing switches, sockets, regulators etc. alongwith 1.5 sqmm multi stranded FRLSH, PVC insulaed copper cable as continuous earth connected to common earth and earth dolly including making good the disturbed surfaces complete all as specified and as directed.

S&F switch piano flush button single pole, one way 5 Amp 240 Volt complete all as specified and directed.

S&F ceiling rose of 65x50mm PVC/polycarbonate three terminal surface bakelite complete all as specifiend and directed.

S&F in replacement surface and wall mounted 20 watt LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specified and directed.

S&F in replacement Modular switch 1 way 10 A, 1 module complete all as specified and directed.

S&F in replacement Modular socket 1 way 10 A, 1 module complete all as specified and directed.

S&F in replacement Modular switch 1 way 16 A, 1 module complete all as specified and directed.

S&F in replacement Modular socket 1 way 16 A, 1 module complete all as specified and directed.

S&F in replacement White cover plate with frame, 1 module complete all as specified and directed.

S&F in replacement White cover plate with frame, 2 module complete all as specified and directed.

S&F in replacement White cover plate with frame, 3 module complete all as specified and directed.

S&F in replacement White cover plate with frame, 4 module complete all as specified and directed.

S&F in replacement White cover plate with frame, 6 module complete all as specified and directed.

S&F in replacement Metal flush box 1/2 module all as specified and directed.

S&F in replacement Metal flush box 3 module all as specified and directed.

S&F in replacement Metal flush box 4 module all as specified and directed.

S&F in replacement Metal flush box 6 module all as specified and directed.

S&F in replacement building security light of 30 Watt New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic driver including housing suitable brackets, nuts & bolts and GI pipe complete all as specified and directed.

S&F in replacement security light of 60 watts New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source with acrylic cover and accessories including housing suitable bracket, nuts & bolts, GI pipe complete all as specified and directed.

S&F in replacement security light of 90 watts New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source with acrylic cover and accessories including housing suitable bracket, nuts & bolts, GI pipe complete all as specified and directed.

S&F in replacement flood light of 200 watts of new generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source with acrylic cover and accessories including housing suitable bracket, nuts & bolts, GI pipe complete all as specified and directed.

S&F in replacement post top 35 watts of new generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source with acrylic cover and accessories including housing suitable bracket, nuts & bolts, GI pipe complete all as specified and directed.

S&F in replacement LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F in replacement round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement aesthetically design 1X1 surface mounted light 15 W, 220 volts AC which provides soft light and glare free symmetrical illumination light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement round shape 15 watt 220 volts AC surface mounted type soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement High efficient solar LED street lighting fitting 24 Watt Mono Crystalline Solar PV Module, MPPT Solar Charge Controller(SCC) for high performance, automatic dusk to dawn operation, High grade Lithium Ferro Phosphate battery for longer backup PIR Motion Sensor for Automatic brightening & dimming Automatic ON/OFF with integrated sensor with IP65 complaint design and accessories including housing suitable bracket, nuts & bolts, GI pipe complete all as specified and directed.

S&F in replacement Acrylic sheet molded letters of size 2'x1' white in color with good quality waterproof LED strip light including constant current movable light electronic driver and making connection with suitable size of copper conductor wire operated with suitable size MCB complete all as specified and directed.

S&F in replacement aluminium composite panel any colour any type of approved shades made out of 3 mm thick aluminium composite panel material consisting of 2 mm thick mineral core sandwiched between two aluminium sheets (0.5 mm thick) complete all as specified and directed.

S&F mild steel framed work as grills, gratings etc with end of bars shouldred and / or rivited or forged into spikes, framed guard bar barred iron door ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290, Gde-E-165, complete all as specified and directed.

S&F 10W integrated LED bulk head luminaire environment friendly, ultra modern, energy saving, surface mounted decorative oval bulk head with LED light, complete all as specified and directed.

Supply, fixing, connecting & testing in replacement PIR movement detector sensor conforming to IEC-60669-1 & 2, single lens, angle of detection 360 degree, 1 channel, surface/flush mounted, diameter of floor detection range of 7m X 7 m, adjustable brightness level-05 to 1000 Lux, rated/operating voltage -230 volts 16 A AC 1, +10%/-15%, 50 hz, lightning output operating time-05 sec to 15 minute, operating temp 0 to 45 degree C, mounting on ceiling mounted bracket (if required) suitable for LED light load upto 1000 Watt for automatic switching ON/OFF of lights by detecting movement/presence of human & natural light within its range/zone with IR remote accessory complete in all respect complete all as specified and directed.

Supply, fixing, connecting & testing in replacement PIR movement detector sensor for corridor area conforming to IEC-60669-1 & 2, single lens, angle of detection 360 degree, 1 channel, surface/flush mounted, diameter of floor detection range of 20 m X 4 m, adjustable brightness level-05 to 1000 Lux, rated/operating voltage -230 volts 16 A AC 1, +10%/-15%, 50 hz, lightning output operating time-05 sec to 15 minute, operating temp 0 to 45 degree C, mounting on ceiling mounted bracket (if required) suitable for LED light load upto 1000 Watt for automatic switching ON/OFF of lights by detecting movement/presence of human & natural light within its range/zone with complete in all respect as specified & directed.

S&F in replacement 60 W LED lamp with a unique design, integrating LED technology and motion detector for energy savings detection range 12 m, weather proof IP 55, day light sensing, angle of detection 0-360 degree, min luminous flux 3400 lm complete all as specified and directed.

S&F in replacement 15 W LED lamp cool light with a unique design, integrating LED technology and motion detector for energy savings detection range 12 m, weather proof IP 55, day light sensing, angle of detection 140 degree, min luminous flux 1100 lm complete all as specified and directed.

M&L for Sub main wiring with 2 runs of 2.5 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn through and including PVC conduit ISI marked not less than 20mm dia(external) with wall thickness not less than 1.8mm with conduit accessories fixed on wall/roof and one run of 2.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable as earth conductor including taking down old unsv submain wiring complete all as specified and directed. Note : Two runs of 2.5 Sqmm cable, one run of 2.5 Sqmm earth conductor and one run of PVC conduit of 20mm dia shall be measured and paid as one unit length.

M&L for Sub main wiring with 2 runs of 4 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn through and including PVC conduit ISI marked not less than 20mm dia(external) with wall thickness not less than 1.8mm with conduit accessories fixed on wall/roof and one run of 4 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable as earth conductor including taking down old unsv submain wiring complete all as specified and directed. Note : Two runs of 4 Sqmm cable, one run of 4 Sqmm earth conductor and one run of PVC conduit of 20mm dia shall be measured and paid as one unit length.

M&L for Sub main wiring with 2 runs of 6 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn through and including PVC conduit ISI marked not less than 20mm dia(external) with wall thickness not less than 1.8mm with conduit accessories fixed on wall/roof and one run of 6 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable as earth conductor including taking down old unsv submain wiring complete all as specified and directed. Note : Two runs of 6 Sqmm cable, one run of 6 Sqmm earth conductor and one run of PVC conduit of 20mm dia shall be measured and paid as one unit length.

S&F in replacement sheet metal enclosure MCB distribution board single pole & neutral 240 volts 2 way single door without bus bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

M&L for laying XLPE isulated cable armoured 1100 volts grade, cross sectional area 10sqmm 2 core aluminum conductor on wall / floors including taking down old complete all as specified and directed.

S&F in replacement MCBs of 'C' series single pole and neutral 6 to 32 amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

S&F in replacement MCBs of 'C' series single pole 6 to 32 amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

M&L for in replacement Earthing complete with galvanised steel earth plate electrode 600x600x 6mm thick , directly in the ground vertically to depth not less than 2.25 mtr below the ground level with top edge of earth plate surrounded by 15cm thick layer of chorcoal dust and common salt. connected to galvanised iron earthing wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel , GI pipe light grade 40mm bore for protection of earth lead and GI watering pipe 20mm bore light grade with funnel and wire mesh, PCC chamber in cement concrete (1:3:6) type C1, 80mm thick pre cast RCC (1:2:4) type B-1 cover reinforced with hard drawn steel wire fabric 50mm mesh size and 3.0 mm dia of wire each way, earth plate surrounded by alternate layres of packed chorcoal salt packed which shall be not less than 15 cm in all sides of earth plate all as shown in electricale Plate No-3 MES Sch Part-I, complete all as specified and directed.

Ms Kamal Kant Agarwal

M/S SHRI RAM INFRASTRUCTURE

RAJ CONSTRUCTIONS

Mani Control System