864WS-44/2022-23

Amount

Surface dressing not exc 15cm deep and getting out in any type of soil, complete all as specified and as directed.

Excavation in trenches not exc 1.50 mtr wide and not exc 1.50 mtr in depth for foundation, shafts, cesspits, manholes, pier holes etc. not exc 10 Sqm on plan and getting out in any type of soil, complete all as specified and as directed.

Hardcore of gauge n exc. 63 mm with Broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed by Engr-in-Charge.

M&L for PCC (1:4:8), type D-2 (using 40mm graded crushed stone aggregates) as in foundations, filling in and mass concrete, complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 mtr mean radius, built in cement mortar 1:4 as in manhole, wall, Drain etc complete all as specified and directed.

M&L for RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in Foundations, including rafts,footings, foundation beams; plinth beams; bases or columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. Note: Design/Sectional detail of RCC structure shall be decided by Engr-in-Charge as per ground requirement.

TMT mild steel bars, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) , complete all as specified and as directed by Engr-in-Charge.

All as per serial item No. 7 here in before but, TMT mild steel bars, 5mm dia and over upto and including 10mm dia, in stirrups, spacers & binders, complete all as specified and as directed by Engr-in-Charge.

Rolled mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) Fe-410- W(Gde E-250) quality 'B' including distance pieces, cleats etc complete all as specified and directed.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar, barred iron doors; ladder, framed balusters; railing; frame work for water tanks, cooler stand etc and similar work conforming to FE 290-0 or Gde-E-165, complete all as specified and directed by Engr in Charge.

Rolled mild steel in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment Fe-410- W(Gde E-250) quality 'B' including distance pieces, cleats etc complete all as specified and directed.

10mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4, finish surfaces even and smooth without using extra cement, complete all as specified and as directed by Engr-in-Charge.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25cm thick, complete all as specified and as directed.

Providing 75 mm thick cement concrete 1:3:6 type C-2 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints through out the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed by Engr-in-Charge.

25mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in floor fough finish to receive floor finishes over and includig 75 mm thick plain cement concrete (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in sub base concrete, complete all as specified and as directed by Engr-in-Charge.

Non skid, ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over & including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and as directed by Engr-in-Charge

Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions including Anodised aluminium snap grid frame work for false ceiling all as specified

S&F Pre-painted coloured corrugated profiled Galvalume/Zincalume sheet with min 0.50mm TCT with BTM of 0.45mm thick conforming to IS -513(AZ-150 GSM,Al Zn alloy metallic coating 550MPA yield stress as per AS-1397),as in roof covering/clading to wall fixed with self taping screws, colour/exterior coat of silicon modified polyster/ BHP x RW paint system 20 micron top coat applied over 5 micron primer and a micron polyster back coat applied over 5 micron primer,all fixed with galvanised self drilling self tapping fastener(12-14x55 with EPDM seals), complete all as specified and directed.

Pre-painted coloured plain steel profiled Galvalume/Zincalume sheet with Min 0.50 mm TCT with BTM of 0.45mm thick conforming to IS-513(AZ-150 GSM, Al Zn alloy metallic coating 550 MPA yield stress as per AS-1397) as roof ridge colour/exterior coat of silicon modified polyster/BHPxRW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer ,all fixed with Galvanised self drilling self-tapping fastener (12-14x55 with EPDM seals) complete all as specified and directed.

Providing cement concrete1:2:4 mix type B-1(using 20mm graded crushed stone aggregate), as in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles, necessary form work, complete all as specified and as directed by Engr-in-Charge.

S&F 2nd class soft wood plain solid straight chowkhats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed.

S&F 35 mm thick 2nd class soft wood plain framed panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board with commercial face veneers complete all as specified and directed.

S&F 35 mm thick 2nd class soft wood (kail) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze et (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section -8 , clause 8.24 (a) complete all as specified and as directed .

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc. 0.5 Sqm in each pane, complete all as specified and directed.

S&F butt hinges, medium weight cold rolled, mild steel of size 100 mm complete, all as specified and as directed

S&F butt hinges, medium weight cold rolled, mild steel of size 75 mm complete, all as specified and as directed

S&F 150 mm long aluminium barrel tower bolts of extruded section and fixed, complete all as specified

S&F 100 mm long aluminium barrel tower bolts of extruded section and fixed, complete all as specified

S&F 150 mm aluminum alloy handles, fabricated type, anodised complete all as specifed

S&F 100 mm aluminum alloy handles, fabricated type, anodised complete all as specifed

S&F Aluminium alloy, anodised, sliding door bolt 300 mm in length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

S&F floor door stopper of alumium body and tongue anodised with land drawn steel spring overall lengthof cover plate 140mm fixed with screw, complete all as specified and as directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

Preparation of surfaces new or unplastered surfaces & applying two coats of cement base paint over one coat of suitable primer , complete all as specified and as directed by Engr-in-Charge.

Preparation new surfaces plastered or unplastered and applying three coats of white wash on wall/ceiling complete all as specified and as directed by Engr-in-Charge.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, for rough finished surfaces of concrete, complete all as specified and directed.

M&L timber in scantling with second class soft-wood (kail) clean sawn timber in scantlings, complete all as specified and directed.

M&L for ceiling and linings with 12mm thick Plywood, grade BWR, type BB,; fixed with screws to timber frame work, complete all as specified and directed.

M&L for ceiling and linings with 6mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one side faces; fixed with screws to timber frame work, complete all as specified and directed.

M&L for applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface complete all as specified and directed.

M&L for point wiring with single runs PVC insulated FRLS grade, 1100V grade cable with multistranded copper conductor of size 1.5 Sq. mm (Nominal area) (ISI Marked) drawn in and including PVC Casing capping /PVC conduit of suitable size with all fittings and accessories including PVC flush box/ Metal flush box/ sunken box of suitable size and drawing continuous earth wire of PVC insulated FRLS grade, unsheathed stranded copper conductor of size 1.5 Sqmm(ISI Marked) terminated the box for following type of point wiring including making good disturbed of wall completed all as directed by Engineer-in- Charge.

One light point or one fan point controlled by one switch SP 230 Volts

One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

Description all as per item No 40 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 2.5 sqmm green solid copper conductor cable as continuous earth wire with lugs complete all as specified and directed.

Supply and fix, Switch piano (ISI marked) Single pole 240 volts, flush type, one way 5Amps complete all as specified and directed.

Supply and fix socket (ISI marked), 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed.

Supply and fix switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and directed.

S & F Ceiling rose three terminals polycarbonate , isolated body complete all as specified and directed. Make Havells/SSK/Cona

S & F LED light fitting fixture 20/ 22W, 6500K, 2000 lm decorative ultra slim with co extruded channel in thermally conductive material with plastic housing, heat sink, environmental friendly having power factor >0.95, surge protection 2.5KV energy efficient ready to use complete all as specified. Make-Wipro/Philips/GE

S&F MCB DB 8 way, 230 volt, sheet metal enclosure for MCB's, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified.

S&F MCB SP 6 to 32 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified.

S&F MCB SPN 40 to 63 Amps, 240 Volts, 50 Hz AC supply suitable for 'C' series, 10 KA breaking capacity complete all as specified.

Supply & fix ventilating fan made out of high quality engineering plastic, resistant to colour change with anti static properties, 250mm sweep suitable to work on 230 Volts 50 Hz, 1200 RPM, coper winding compete all as specified and directed. Make: Bajaj/ Usha/ Havell's

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections of size 10Sqms with two single core cablesuspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circulaer,, complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground, (Earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 mtr below normal ground level, connected to and including 4mm dia galvanized iron wire lead by means of bolts, nuts, check nuts and washers of galvanized standard iron or steel all as specified or indicated in electrical plate No 3 of MES Part-I, including testing on completion including the material and labour and taking out old unserviceable earthing of the following :- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Precast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (d) Funnel with watering pipe of GI 20 mm nominal bore medium grade and copper lugs etc all as specified. (e) 15 mm nominal bore light grade GI protection pipe 7.5 mtr long for protection of earthing lead from mechanical injury or tempering. (f) Requisite quantity of common salt and charcoal. (g) Testing of earthing. Note : On testing after completion of earthing, if the desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk and cost to the entire satisfaction of the Engineer-in-Charge.

Supply and fixing LED street light fitting 40 Watt with lense, toughned glass, IP 66 protection 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant with impact and corrosion resistant complete with bracket made out of 40mm bore GI tubing 1.5 m with MS clamps, fixing of fitting complete all as specified and directed.

M/S AKMAL CONSTRUCTIONS

M/S SHIMAR STAR GLACIER

M/S TAJ DIN KHARI

mirandcompany

BASHIR AHMAD MIR

M/S Paradise Constructions