REPAIR MAINT OF INTERNAL ELECTRIFICATION AND PETTY REPAIR AND MISC REPAIR WORK OF INTERNAL ELECTRIFICATION AT GH GH ACCN CESR HQ 138 WE OFFICE HRDC EW COY TAC OTM GH OFFRS MESS SIGNAL OFFRS MESS CHARLIE MESS ALFA MESS FSH NURSING OFFRS M

Amount

Taking down carefully copper/aluminium point wiring (light, fan,bell, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc . credit for above items should be made as per conditions separately.

M&L for point wiring with copper conductor cable, multistranded, single core 1.5 Sqmm size for one light point controlled by one switch with PVC insulated multistranded copper conductor cable of size 1.5 sq mm for earth continuity in and including PVC casing and capping of approved size and quality fixed on walls/ceiling/wooden panelling including fixing 3 mm thick bakelite sheet on PVC board/ wooden board/MS sunken box heavy duty type of any size complete all as directed and specified. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of casing caping PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

All as per Item No 2.00 but for one 3 pin socket outlet, 5 Amps Independent board with cables 1.5 Sqmm size

All as per Item No 2.00 but for one 3 pin socket outlet, 5 Amps same board with cables 1.5 Sqmm size

All as per Item No 2.00 but for one bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5sqmm size

All as per item No 2.00 above but for power point 3 pin switch socket 15 Amp with PVC copper conductor cable multistrand unsheathed 2.5 Sqmm on independent board incl one run 1.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping fixed on wall incl PVC /Wooden board/MS sunken box heavey duty type complete all as specified and as directed.

S&F for ceiling rose surface bakelite 65x50 mm two to three terminals.all as specified and directed by Engr-in-charge. Make : Anchor/Legrand/Crabtree/Cona

S&F switch piano flush type one way single pole 5 Amp 240 volts. Make : Anchor/Legrand/Crabtree/Cona

S&F switch socket combination 2 in 1, 5 Amps flush type universal. Make : Anchor/Legrand/Crabtree/Cona

S&F for socket outlet 2 in 1 3Pin, 5A, flush type. Make : Anchor/Legrand/Crabtree/Cona

S&F switch socket combination 2 in 1, 5/6 pin 5 and 15 Amps flush type universal. Make : Anchor/Legrand/Crabtree/Cona

S&F for Modular switch one way single pole 10 Amp 1 module 240 volts. Make : Anchor/Legrand/Crabtree/ABB

S&F for Modular switch one way single pole 16 Amp 1 module 240 volts. Make : Anchor/Legrand/Crabtree/ABB

S&F for Modular socket 6 A, 2/3 Pin combined 2 module 240 Volt, Make : Anchor/Legrand/Crabtree/ABB

S&F for Modular socket 6/16 A, 2/3 Pin combined 2 module 240 Volt, Make : Anchor/Legrand/Crabtree/ABB

S&F for modular white cover plate with frame (inner plate) 3 module. Make : Anchor Roma/Havells/L&T

S&F for modular white cover plate with frame (inner plate) 4 module. Make : Anchor Roma/Havells/L&T

S&F for modular white cover plate with frame (inner plate) 6 module. Make : Anchor Roma/Havells/L&T

S&F for modular white cover plate with frame (inner plate) 8 module. Make : Anchor Roma/Havells/L&T

M&L for lamp holder PVC/Polycorbonate type insulated body with back plate suitable for batten fittings as specified and directed. Make : Anchor/Legrand/Crabtree/Cona

Supply and fixing MCB SP 6 to 32 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engr-in-Charge. Make: Cat part No 4085 87 to 4085 95 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SP 40 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engr-in-Charge. Make: Cat part No 4085 96 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SP 63 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engr-in-Charge. Make: Cat part No 4085 98 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SPN 6 to 32 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engr-in-Charge. Make: Cat part No 4086 09 to 4086 17 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SPN 40 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4086 18 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB SPN 63 Amps, 'C' series, 230 V A/C complete incl taking down old MCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No 4086 20 of Legrand (DX³) or equal approved in Schneider (Acti -9)/ Siemens (Betagard-5SL4)

Supply and fixing MCB TPN 63 Amps, 'C' series, 415 V A/C complete incl taking down old MCBs all as specified and as directed by Engr-in-Charge. Make: Cat part No 4086 83 of+B45

Supply and fixing MCB 4 pole 100 Amps, 16 kA, 415 Volt complete incl taking down of old MCCBs all as specified and as directed by Engineer-in-Charge. Make: Cat part No DHMJCFPF100 of Havells or equal approved in Schneider (NSX)/Siemens (3VL2)/L&T (D-Shine)/Legrand (DX3)

Supply and fixing MCB distribution board Double door, regal grey, sheet metal enclosure, SPN 240 volts 8 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incl taking down old DBs. Make: Cat part No 5076 11 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

Supply and fixing MCB distribution board Double door, regal grey, sheet metal enclosure, SPN 240 volts 12 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incl taking down old DBs. Make: Cat part No 5076 12 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

Supply and fixing MCB distribution board Double door, regal grey, sheet metal enclosure, SPN 240 volts 4 way with 200 amps rated bus bar concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incl taking down old DBs. Make: Cat part No 5076 10 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

Supply and fixing MCB distribution board Double door, sheet metal box, TPN, DBs are fitted with suitable rated bus bars, 415 volts 4 ways, concealed to wall and making flush with wall surfaces and making good to disturbed surfaces of walls to match with the exisiting surface etc incluidng taking down old DBs complete all as specified and as directed by Engineer-in-Charge. Make: Cat part No 5076 70 of Legrand (Ekinoxe) or equal approved in Schneider (Acti-9)/Siemens (Betagard-8GB32)

Sub main wiring with two runs of 6 Sqmm (2x6 sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all accessories etc with one run of 6Sqmm (1x6sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire and making good to match with existing surfaces including taking down of old sub main wirings complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 6 Sqmm (2x6sqmm), one run of 6 Sqmm (1x6 sqmm) cable and one metre of PVC casing caping will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of casing caping PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

Sub main wiring with two runs of 4 Sqmm (2x4 sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all conduit accessories etc with one run of 4 Sqmm (1x4sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire, including cutting chases in wall for PVC conduit, sinking of MS boxes and making good to match with existing surfaces including taking down of old sub main wirings complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 4 Sqmm (2x4sqmm), one run of 4 Sqmm (1x4 sqmm) cable and one metre of conduit will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of casing caping PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

Sub main wiring with two runs of 2 Sqmm (2x2.5 sqmm) 1100 volts grade single core FRLS PVC insulated unsheathed multistranded copper conductor confirming to IS-694 drawn through and including non-metalic PVC casing caping ISI marked with all conduit accessories etc with one run of 2.5 Sqmm (1x2.5sqmm) single core FRLS PVC insulated unsheathed copper conductor cable as earth wire, including cutting chases in wall for PVC conduit, sinking of MS boxes and making good to match with existing surfaces including taking down of old sub main wirings complete all as specified and directed by Engineer-in-Charge. Note:- 2 runs of 2.5 Sqmm (2x2.5sqmm), one run of 2.5 Sqmm (1x2.5 sqmm) cable and one metre of conduit will be measured as one unit. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB Make of casing caping PLAZA/FINOLEX/ SUPREME/PRESTO PLAST

S&F in replacement of electric bell (multi music type) AC, 230Volts Single pole. Make : Anchor/Legrand/Crabtree/Cona

S&F in replacement of electric bell push, flush type 5 Amp Make : Anchor/Legrand/Crabtree/Cona

S&F in replacement of PVC Gang box 2 in 1, 5 pin 5 & 15 Amp flush type universal all as specified and directed.

S&F in replacement of PVC Gang box 3 pin 5 Amp flush type universal all as specified and directed.

Fixing only in replacement of old U/S decorative durable LED batten fitting of any capacity, 4/2 feet long with decorative and caps, powder coated CRCA decorative for LED tube of any capacity, 4/2 feet long (white colour) tube having driver ,connector block etc complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core all as required at site or directed by Engr in Charge. Note: material shall be issued under Sch "B" store free for fixing only.

Fixing only in replacement of old U/S LED Mirror light fitting of any capacity and type 230 volts box type , with standard specification etc complete withh all accessories pre wired twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr in Charge. Note: material shall be issued under Sch "B" store free for fixing only.

Fixing only in replacement of LED Bulk head luminaire of any capacity 10/11 Watts with all accessories pre wired twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr in Charge. Note: material shall be issued under Sch "B" store free for fixing only.

S&F LED Post top made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP 65 protection of capacity 40 watt LED white colour including suitable size of GI pipe for fixing of light on post and elecrical connection including taking down light fittings complete all as specified and directed by Engr in Charge. Make : Cat part No BGCL 70W LED WH White colour CELESTA type of Bajaj or equivalent in Crompton/Philips/C&S

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor of size 4 sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular including taking down old cable complete all as specified and directed by Engr-in-Charge Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor of size 6 sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular including taking down old cable complete all as specified and directed by Engr-in-Charge Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor of size 10 sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular including taking down old cable complete all as specified and directed by Engr-in-Charge Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB

S&F single core copper conductor of size 1.5 Sqmm (FRLSH) including taking down of old u/s copper conductor all as specified and directed by Engr in Charge. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB

S&F single core copper conductor of size 2.5 Sqmm (FRLSH) including taking down of old u/s copper conductor all as specified and directed by Engr in Charge. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB

S&F single core copper conductor of size 4.0 Sqmm(FRLSH) including taking down of old u/s copper conductor all as specified and directed by Engr in Charge. Make of cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB

S&F single core copper conductor of size 6.0 Sqmm(FRLSH) including taking down of old u/s copper conductor all as specified and directed by Engr in Charge. Make of Cable: L&T/FINOLEX/GRANDPLAY/ANCHOR/ POLYCAB

S&F in replacement of plug top 3 pin of capacity 5/6 Amp complete all as specified and directed by Engr in Charge. Make : Anchor/Legrand/Crabtree/Cona

S&F in replacement of plug top 3 pin of capacity 15/16 Amp complete all as specified and directed by Engr in Charge. Make : Anchor/Legrand/Crabtree/Cona

S&F in replacement of LED Driver unit ISI marked suitable for recessed mounting fitting of 24 Watts complete all as specified and directed.

S&F in replacement of LED Driver unit ISI marked suitable for recessed mounting fitting of 36 Watts complete all as specified and directed.

S&F in replacement of heating elements suitable for water electric storage heater vertical type 220/240 V AC of capacity 1500W complete all as specified and directed by Engr in Charge .

S&F in replacement of heating elements suitable for water electric storage heater vertical type 220/240 V AC of capacity 2000W complete all as specified and directed by Engr in Charge .

Rewinding of burnt windings of exhaust fans of size up to 450 mm size including dismantling from location and removing the burnt out winding , cleaning the stator with CTC solution to remove the burnt slots. Rewinding the same with new super enamelled copper wire same gauge and size /number of turns , varnishing the winding completely and reassembling completely. (Spare parts replaced will be measured &paid seperately)

S&F in replacement of following spares parts/ items of Exhaust fan of various type :-

Flexible twin twisted copper wire two core of size 23/0.0076mm

Ball bearing suitable for Exhaust fan up 450 mm sweep any make .

Condensor 2.5 MFD 230 V suitable for Exhaust fan of any sweep/size .

Condensor 4 MFD 230 V suitable for Exhaust fan of any sweep/size .

Gun metal Bushings suitable for Exhaust fan fan up to 450 mm sweep any make .

Louvers made out of metal sheets suitable for up to 450 mm sweep exhaust fans complete all as specified and directed by Engr-in-Charge.

Material and labour for earthing complete with galvanised steel earth plate 600 x 600 x 6 mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below ground level connected to and including GI wire of size 4 mm dia by means of nuts, bolts, washers etc made of and connected to test point and earth dolly as all shown in electrical plate No.3 of SSR Part-I 2009 and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, pre cast RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM jali (weight not less than 4.0 kg/Sqm) with cast iron frame, funnel, with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore light grade GI protection pipe, test point etc incluidng taking down of old u/s earthing set complete all as specified and as directed. Note: (i) Item includes the cost of 7.5 m GI pipe for protection of earth lead. Any additional length shall be adjusted through deviation order. (ii) Item includes the cost of 7.5 m GI earth lead. Any additional in length shall be adjusted through deviation order ( For Main DBs ) (iii) Item includes the cost of Charcoal and commercial salt ( For Main DBs )

S&F in replacement of SPN enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp 240 Volts complete all as specified and directed by Engr in Charge. Make : Legrand/Schneider/Siemens/ABB/L&T

SUMEET TRADING CORPORATION

R B TRADERS

M/S ADHISH ENGINEERS

M.S Sharma Enterprises

AKHTAR HUSSAIN

HILL AND CO.

S S BUILDERS

VIJAY ENTERPRISES

satyabhama and co