Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹69.7 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹92.4 L+₹22.7 L (32.5%)Rejected-Finance | L2 | Rejected-Finance Second lowest bidder | |
| 3 | L3₹1.1 Cr+₹37.3 L (53.5%)Rejected-Finance | L3 | Rejected-Finance Third lowest bidder |
Tender Value
₹48.0 L
EMD Value
₹95,800
Closing Date
20 Jun 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
HPSIDC Shimla
Construction of Cocoon, Marketing and storage centre and silk technology cum demonstration centre at Sidhpur Distt. Mandi (HP).
2023_SIDC_74891_1
Job No. 7
Open Tender
Civil Works - Buildings
Item Rate
360 days
Sidhpur Mandi
Please refer Tender documents.
10 documents required · 10 mandatory
₹5,700
₹95,800
11 Sept 2023
13 Jun 2023
21 Jun 2023
13 Jun 2023
20 Jun 2023
13 Jun 2023
Amount
Excavation in foundation, trenches etc. in earth work in all kind of soil lifts upto 1.50 mtrs. Stacking the excavated soil not more than 3 mtrs. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed upto all leads and lifts including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing & laying cement concre 1:4:8 (1cement: 4sand: 8graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing from work with steel plates 3.15mm thick weled with angle iron in frame 30x30x5mm so as to give a fair finish including levelling centering, shuttering strutting and propping etc. With wooden battens and ballies, hight of propping and cenring below supporting floor two ceiling and removal of the same for instu- reinforced concrete and plain concrete work in:- (a) Foundation footing bases of columns etc. and mass concrete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
b) Columns, pilasrs, post and struts, square, rectangular or polygonal in plain including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
(c) Beams, cantilevers, girders & lintels, sides & soffits or beams, beam haunchings, cantilvers bressumers and lintels not exceeding 1mtrs in depth.
(d) Flat surfaces such as soffits of suspended floors, roofs, landing of the like floors etc. upto 200mm in thickness.
(f) vertical surface sch as wall any thickness partition plaster and string course and like
Providing and laying cement concrete work 1:1.5:3 (1cement: 1.5sand: 3 greaded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in a) Foundation footing bases of columns etc. and mass concrete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
b) Columns, pillars, posts and struts upto floor two level.
c) Suspended floors, roofs, landings and their supports, balconies, beams, girders, bressumers and their cases (except spiral cantilever upto floor two level.
Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor two level including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing and laying cement concrete 1:3:6 (1cement:3sand:6graded stone agregate 20mm nominal size ) and curring complete excluding cost of form work in foundation and plinth. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Brick work using common clay burnt building bricks in superstructure avobe ground level in cement mortar 1:6 (1cement: 6 sand) 1st class bricks upto all hight.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Supplying & fixing rolling shutters of approved make made of 80mmx 1.25mm M.S laths interloked together their entire length and joined together at the end by end locks mounted on specially design pipe shaft, with brackets side guides and arrangment s for inside and outside locking with push pull operation complete but excluding the cost of the top cover and spring including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing & fixing 27.5 centimeter long wire spring grade no.2 for rolling shutter including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing & fixing top cover for rolling shutters.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing & fixing wall bearing for rolling shutters.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
6mm cement plaster in ceiling with cement mortar 1:4(1cement:4 sand).including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
15mm cement plaster in singale coat on the rough side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand).including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
15mm cement plaster in singale coat on the fair side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand).including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Appling birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final metter finish to the surface complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Distempering (two coats) with oil boud washable disremper of approved brand and manufacture and of required shade on decorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and menufacture after thoroughly brushing the surface free from mortar dropping and other forign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Finishing wall with water proofing cement paint Apex of Asian brand and manufacture and of required shade on decorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing and fixing 10mm thick antiskid water proof stain and impact resistant heavy duty vitrified tiles Nitco or equivalent 600x600mmx10mm manufactured of approved shade and colour in flooring, trade of steps and landing laid over12mm thick cement mortor 1:3 ( 1 cement:3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
White glazed tiles 6mm thick in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1cement: 3sand) & finished with flush pointing in white cement. White glazed tiles in treads of steps not exceeding 30cm in width.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
P/F anolised aluminium work for doors, windows ventilators and partitions with exttuded built up standard tabular and other section of approved make conferming is IS 733 and IS 1285 anodised tranparent or dyedto required shade according to IS 4868 (minimum anodic coating of grade AC15) fixed with rawl pluges aluminium section shall be smooth rust free stright mitred and jointed machenically wherever required all complete as per architectural drawing and the direction of engineer-in-Charge. (A) For doors windows and ventilators and glazed partitions frames i/c P/F hings pivots and making provisions for fixing of fittings where wver required i/c the cost of PVC neoprence gasket as required (fitting and glazing panelling shall be paid for sepratelly.
For door and window shutters complete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
P/F glazing in aluminium door, windows, ventilatots shutter and partitions etc. with PVC/ neoprens gasket etc. complete as per the architectural drawing and the direction of Engineer in Charge (cost of aluminium snap beeding shall be paid in basic item-glazing with glass panes of 5.50mm thickness 9 weight not less than 13.75 Kg/sqm. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
P/F 12mm thick prelaminated board both side bwp phenol bonded exterior/interior grade panelled shutters with frame of 2nd class deodar wood for doors i/c bright finished/black enamelled iron butt hinges with necessary screws 40mm thick frame. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
P/F alumimium anodised powder coated pattern to exisiting window/ventilatior with 80mm x 80mm panels with 25 x 8mm thick alumimiun flat in windows and ventilatior including fixing with aluminium screws or bolts and nuts complete in allumimium channels basefremes (Alluminium chaannle base frems to be measured and paid for separately) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing & fixing aluminium sliding door bolt anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. (i) 250mm x 16mm.
Providing and fixing aluminium tower bolts (barrel type ) anodized transparent or dyed to required shade & colour including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..(a)200 x 10mm
Prooviding and fixing aluminium finshed brass handles with nuts and secrews etc complete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.. (a) 125mm.
P/G CGI sheet roofing fixed with nuts and screws J or L hooks 8mm dia with bitumen and limpet washer complete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. 0.63mm thick
Steel work welded in built up sections, trusses and framed work, i/c cutting, hosting, fixing in position and appling a priming coat of red lead paint:- (a) In trusses and trussed purlins in building including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Appling priming coat over new steel and other matel surfaces after and including prepairing the surface by thoroughly cleaning oil grease, dirt and other foreign matters sand papered knotting Ready mixed pain brushing red oxide/zink oxide chrome including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Painting two coat (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint otyher than white including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Cement Concrete flooring 1:2:4 (1cement: 2sand: 4graded stone aggregate 20mm nominal size) laid in one layer finished with of floating coat of neat cement 40mm thick including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
P/L PVC pipe jointed with approved adhesive 100mm dia including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing and fixing vitreous china wash, down water closet (European type, W.C. pan) with integral `P' or S trap inlcuding jointing the trap with soil pipe in cement mortar 1:1 (1cement:1sand) (Seat and cover to be measured and paid for separately). (Ordinary Closet). including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing and fixing PVC P trap Complete in all respect 110mm including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing and fixing PVC cistern 10.00 / 12.50 ltrs. capacity vitreous china low level flushing cistern with a pouir of C.I or mild steel brackets complete with fitiings. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing and fixing plastic seat(solid cover) and cover for wash down water closet with C.P. Brass hinges and rubber buffer in white plastic seat cover including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
P/F zet for W.C complete in all respect including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing and fixing to wall ceiling and floor G.I. pipe (Heavy Grade) 15mm dia. With fittings and clamps i/c making good the wall, ceiling and floor including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing and fixing M.I. or G.I. unions. 15mm dia. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing and fixing PVC connection. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing & fixng PVC waste pipe for wash basin or sink 32mm dia. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing & fixing pvc floor trap ISI marked of self cleaning design i/c fixing with approved adhesive etc. 110mm x 90mm. (weigh not less than 250 gm) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing & fixing 100mm sand cast iron grating for gully, floor or Nahni trap. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing & fixing CP stop cocks 15mm dia (Jagour/excel Make). including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing & fixing CP brass bib tap with capastan head 15mm dia. (Jaguar/Excel Make). including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing & fixing C.P. pillar tap with capaston head. 15mm dia. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing and fixing towel rail complete with C.P. brass bracket fixed to wooden plugs with C.P. brass 600mm x 20mm. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing & fixing 600 x 450mm bevelled edge mirror of superior glass mounted on 6mm thick AC sheets or plywood sheet and fixed to wooden plugs with CP brass screws and washers of standard quality. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Single equal branch of required degree with oval access door, insertion rubber washer 3mm thick nut and bolt complete. 100 mm dia. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
P/F plain bend ISI marked including fixing with approved adhesive etc. Complete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..(a)110mm dia
P/F PVC collors ISI markes i/c fixing with approved adhesive etc. complete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.110mm
Providing and fixing PVC water storage tank. 1000 ltrs. Capacity with all necessary fittings. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
P/F brass soap dish with C.P. brass brckets fixed to wooden cleats with C.P. brass screws. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
P/F on wall face PVC ( D-plast) rain water pipes for working pressure not less than 4.5 kg/ sqm i/c filling the joints with approved adhesive complete-100mm dia pipe including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Constructing manhole with RCC top slab in 1:2:4 (1cement: 2sand :4graded stone nominal size) foundation concrete 1:4:8 (1 Cement: 4 sand :8 graded stone aggregate 40mm nominal size) inside plastering 15mm in cement morter 1:3 (1cement : 3sand) finished with a floating coat in cement concrete 1:2:4) (1cement: 2sand :4graded 20mm stone nominal size) finished smooth including curing & testing complete. Inside size 800mm x800mm x 500mm deep including C.I. cover with frame and cover to be not less than 38kg. Weight of frame 23kg. and weight of cover 15kg with 200 thick. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
P/F m.s. holder bat clamps of approved design to CI AND SCI pipes 100mm dia including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
SITE DEVELPOMENT: Cutting in earth work and disposal of excavated earth upto a lead of 2km by mechanical transport. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Excavation in foundation, trenches etc. in earth work in all kind of soil lifts upto 1.50 mtrs. Stacking the excavated soil not mkore than 3mtrs. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating of all surplus excavated earth as directed within all leads and lifts disposed earth to be levelled neatly dressed including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing and laying cement concrete 1:6:12 (1cement:6sand:12graded stone agregate 40mm nominal size ) and curring complete excluding cost of form work in foundation and plinth including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing & laying cement concrete work 1:4:8 (1cement: 4sand: 8graded stone aggregate 25mm nominal size) and curing complete excluding cost of form work in foundationand plinth including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing and laying PVC pipes in weep holes. 100mm dia. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Boulder filling behind the retaining wall including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Stone soiling under floor with kharanja stones interstices and spall complete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
PUNEET KUMAR GOVT CONTRACTOR
Sahil Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .