Ajmer Division: Provision of Dual VDU by replacing operating panel at 05 Nos. EI stations in (AII-BER) section under the jurisdiction of DSTE/AII in Ajmer division NWR

Description:- Supply of embedded fanless PC based VDU control terminal as per RDSO spec. No.

The size of VDU shall be minimum 42 inch. Note: (i) Technical requirements shall be mentioned in the tender document. (ii) One revolving chair should be supplied with control terminal. Inspection: Consignee Inspection charges: None Payment terms:100% after supply

Description:- Installation, wiring, testing and commissioning of embedded fanless PC based VDU

STS/E/TAN/3007 version 1 dated:02.11.12. Note: (i) Technical requirements shall be mentioned in the tender document by tendering authority. Inspection: Consignee Inspection charges: None Payment terms:100% after commissioning.

Description:- Supply of embedded fanless PC based Maintenance terminal as per RDSO spec. No. RDSO/SPN/192/2019 Ver. 2 or latest & RDSO TAN No. - STS/E/TAN/3007 version 1 dated:02.11.12.

the tender document by tendering authority. (ii) One table of suitable size along with revolving chair should be supplied with Maintenance terminal. Inspection: Consignee Inspection charges: None Payment terms:100% after supply

Description:- Installation, wiring, testing and commissioning of embedded fanless PC based

STS/E/TAN/3007 version 1 dated:02.11.12. Note: (i) Technical requirements shall be mentioned in the tender document. Inspection: Consignee Inspection charges: None Payment terms:100% after commissioning.

AJMER DIVISION-S AND T/NORTH WESTERN RLY Description:- Supply of Instruments and Tool Kits required for Trouble Shooting and repair of hardware and software for EI system should be supplied for stations. (This includes tools required for EI maintenance sorts of crimping, insertion, removal, general purpose tools like screw drivers, spanners, PCB extractor, temp. controlled soldering iron, wire cutter, nose pliers etc. & measuring

repair at site). Each set comprises of the following :- * Crimping tool for all types of special cable assembly used in EI system. * Insertion tool for all types of special cable assembly used in EI system. *Removal tool for all types of special cable assembly used in EI system. * Digital multi-meter (Fluke

(Godrej Make/Jalaram) of good quality to store tool, spare cards and documents. * Steel Book rack Size: 1850mm height, 900 mm width and 316 mm depth for keeping documents. (Godrej Make/Jalaram) * Clamp Earth Tester. (as per specs mentioned in tender document.) * Clamp Current Meter (fluke 362 or superior) * Ferrule tagging printer for cable/wires (Supported label tape sizes: 6 /

Description:- Preparation of SWR literature in English along with associated mid-section interlocked gate with all corrections as per approved SWRD & approved SIP. For these all-technical corrections,

for approval before printing, as required for final processing of CRS sanction. This also includes preparation of maintenance cards in format provided by Rly. Inspection: Consignee Inspection charges: None Payment terms:100% after execution.

Description:- Translation of Station Working Rules from English to Hindi and framing out in DIGLOT

the contractor and has been covered separately in item no. 01011800 of Chapter 1 of SOR. Inspection: Consignee Inspection charges: None Payment terms:100% after execution.

per Railway practice. Inspection: Consignee Inspection charges: None Payment terms:100% after execution.

Description:- Preparation and supply of laminated one set of all the completion plans including circuit diagrams and indoor as well as outdoor completion documents on standard 75-micron polyester film for station in Auto CAD. 6 (Six) sets xerox copies will also be provided for each of the

locations, Cable termination details, Signalling Plan, SWR Diagram, Wiring Diagrams, Selection table, Locking table, Contact analysis, Fuse and Tag Block analysis of Relay Rack, CT rack, Control cum Indication Panel/VDU Diagram, Power Panel Diagram, Track circuit plan, rack erection plan and Junction Box details etc. Inspection: Consignee Inspection charges: None Payment terms:100% after execution.

Description:- Addition/alteration in existing relay room wiring. It includes supply of PVC insulated indoor Railway signalling cable @ 40<45@Core/40-Core) of (1/0.6) sqmm as per RDSO Spee. No. IRS/S-76/89 (Amnd.2 or latest) for wiring between relay room and SM's/Panel room & Relay room to DP in SM office for block working. This also includes supply of PVC insulated jumper wires of multi strand 16/.2 mm, tinned in all colours as per RDSO Specn.No.IRS-S-76/89(Amnd.2 or latest). This

racks by using 10/6 sqmm copper flexible wire as per instructions of engineer incharge. This will include wiring between control panel and relay room if required. All wiring will be done as per standard practice of North Western Railway with neat dressing & threading. The item includes supply & wiring of tag block, fuse with bases (G-Type and ND Type) and all other related material required for complete indoor wiring in relay room. Inspection: Consignee Inspection charges: None Payment terms:100% after execution.

Description:- Supply & Installation of Modular power supply arrangement for VDU and industrial PC (Embedded PC) with input and output redundancy arrangement and Hot pluggable Modules as per RDSO specification. Make Gallant or similar. One set consists of 1. Input O- ring diode module with potential free -1 No contacts (PFC) for two 110 V DC sources from IPS and single 110 VDC bus Qty 1 No. 2. Isolated Inverters (Master / slave) - Input-110 V DC Output: 120 V AC/220V A500VA - 02 Nos.

back panel mother board /front panel power connectors inverter auto change over switch and all required over switch and all required protection circuits (3U height for main rack 132.5mm +/-10% & 1U height for mounting 44.5mm +/- 10%) Qty - 1 No. Make Gallant or similar. (This item is for Operating VDUs of EI system) Inspecting Agency : (i)for inverters and converters : RDSO (ii) for other items : Consignee Inspection Charges: (i) Borne by Railways (ii) None For Supply of Modular power supply arrangement. Payment Terms: 100% after Supply

AJMER DIVISION-S AND T/NORTH WESTERN RLY Description:- Supply & Installation of Modular power supply arrangement for VDU and industrial PC (Embedded PC) with input and output redundancy arrangement and Hot pluggable Modules as per RDSO specification. Make Gallant or similar. One set consists of 1. Input O- ring diode module with potential free -1 No contacts (PFC) for two 110 V DC sources from IPS and single 110 VDC bus Qty 1 No. 2. Isolated Inverters (Master / slave) - Input-110 V DC Output: 120 V AC/220V A500VA - 02 Nos.

back panel mother board /front panel power connectors inverter auto change over switch and all required over switch and all required protection circuits (3U height for main rack 132.5mm +/-10% & 1U height for mounting 44.5mm +/- 10%) Qty - 1 No. Make Gallant or similar. (This item is for Operating VDUs of EI system) Inspecting Agency : (i)for inverters and converters : RDSO (ii) for other items : Consignee Inspection Charges: (i) Borne by Railways (ii) None For Installation of Modular power supply arrangement. Payment Terms: 100% after Commissioning

Description:- Q-Series Neutral Line Relay (QN1 Type), 12F/4B, 24V DC complete with plug board

Specn.No.IRS:S-34 & S-23 or latest. The interlocking code for this unit shall be "ABCDE". Inspection: - RDSO Inspection charges: - Borne by Railways Payment Terms: - 100% after supply.

Description:- Q-Series Neutral Line Relay (QN1 Type), 8F/8B, 24V DC complete with plug board

Specn.No.IRS:S-34 & S-23 or latest. The interlocking code for this unit shall be "ABCDF". Inspection: - RDSO Inspection charges: - Borne by Railways Payment Terms: - 100% after supply.

Description:- Q-Series Twin Neutral Line Relay (QNN1 Type), 6F/2B, 24V DC complete with plug

Specn.No.IRS:S-34 & S-23 or latest. The interlocking code for this unit shall be "ACDEK". Inspection: - RDSO Inspection charges: - Borne by Railways Payment Terms: - 100% after supply.

Description:- Q-Series Twin Neutral Line Relay (QNN1 Type), 4F/4B, 24V DC complete with plug

Specn.No.IRS:S-34 & S-23 or latest. The interlocking code for this unit shall be "ACEHJ". Inspection: - RDSO Inspection charges: - Borne by Railways Payment Terms: - 100% after supply.

Description:- Q-Series Magnetically Latched Neutral Line Relay (QL1 Type), 11F/4B,24V DC

and RDSO Specn.No.IRS:S-34 & S-23 or latest. The interlocking code for this unit shall be "ABDEG". Inspection: - RDSO Inspection charges: - Borne by Railways Payment Terms: - 100% after supply.

Description:- Q-Series Line Relay (QNA1 Type), AC immunized, 8F/8B, 24V DC along with plug

Specn.No.IRS:S@ 45"44@ S-23 and S-60 or latest. The interlocking code for this unit shall be "ABDGH". Inspection: - RDSO Inspection charges: - Borne by Railways Payment Terms: - 100% after supply.

Description:- Q-Series Line Relay (QNA1 Type), AC immunized, 12F/4B, 24V DC along with plug

Specn.No.IRS:S@ 45"44@ S-23 and S-60 or latest. The interlocking code for this unit shall be "ABDFH". Inspection: - RDSO Inspection charges: - Borne by Railways Payment Terms: - 100% after supply.

Description:- Fixing of Q series relay base plate/metal to metal relay mini group and major group base plate, laying, bunching, lacing, dressing & packeting of 60/40 core PVC indoor cable/flexible

soldering. This includes fuse wiring, bus bar looping etc. required for keeping installation ready for circuit wiring work & panel troughing work. The work shall be done as per approved plan, extant practice on NWR & the instruction of Rly. Engineer at site. Inspection: - Consignee Inspection charges: - None Payment Terms: - 100% after execution

Inspection charges: - Borne by Railways Payment Terms: - 100% after supply.

22 AJMER DIVISION-S AND T/NORTH WESTERN RLY

(0.5sqmm) as per IS 694:2010 and RDSO Specn.No.IRS:S-76/89 (Amnd-3) or latest. Each coil should be of 100/200/500 meters length. Colour of the wire which is required will be specified by the Engineer incharge. Inspection: (i) RDSO/RITES if value of item in work more than 10 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 10 lakhs as per extant instructions by Railway Board. Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% on Supply

Description:- Supply of indoor PVC jumper wire (1x 0.6 mm) of all colours as per RDSO Specn.No.IRS:S-76/89 (Amnd.3) or latest. Note: wires colours will be specified/decided by site

Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 10 lakhs as per extant instructions by Railway Board. Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% on Supply

Description:- Supply of PVC insulated Railway Signalling multi-core Indoor Cable 24 core (1 mm

more than 10 lakhs (ii) Consignee subject to procurement from RDSO approved vendors if value of whole item in work less than 10 lakhs as per extant instructions by Railway Board. Inspection Charges: (i)Borne by Railways (ii) None Payment Terms: 100% on Supply

suitable for 3.3KV to 11KV (Class B) conforming to IS I5652-2006 Inspection: Consignee Inspection Charges: None Payment Terms: 100% after Supply.

mm width and 485 mm depth. Make: Godrej Storewel Plain Large or Similar of reputed brand. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after Supply.

Description:- Supply of basic material to construct unit maintenance free earth as per RDSO Specs. No. RDSO/SPN/197 Version 1.0 dtd. 04.07.2016 or latest and conforming to RDSO Drg. No. SDO/ RDSO/E&B/001. It consist of following: (a) Copper bonded steel electrode of 3.0 m long, 17 mm Dia with copper bonding thickness of minimum macrons and UL listed and marked = 1 no. (b) Earth enhancement material supplied in sealed bags of minimum 10 kg = 3 nos. (c) Copper strip of

Copper strip of 150x25x6mm (SEEB) = 1 no. (ii) Supply of 35 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting main earth electrode to MEEB in the equipment room in duplicate.(minimum 10 meter) (iii) Supply of 16 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting MEEB to SEEB and SPD to MEEB (minimum 10 meter ) (iv) Supply of 10 sq. mm multi strand single core PVC insulated copper cable as per IS: 694 for connecting various equipments to SEEB (v) Supply of copper lug sleeve for 3/16 cable Inspection: RDSO Inspection Charges: Borne by Railways Payment Terms: 100% after Supply

Description:- Installation of Unit Maintenance Free Earth as supplied under item no. 13010300 above It includes: ( i ) Digging the earth to the required depth. (ii) Insertion of electrode. (iii) Filling of earth enhancing compound (Approx.30 Kg) (iv) Provision of exothermic weld connections to copper tape of 25 mm x 6 mm x 150 mm to the earth electrodes. All material tools and features required for weld will be arranged by contractor. (v) This also includes CC cover 1.5 ft x 1.5 ft. 1 ft wall thickness 2 inch with cover 3-inch thickness. Cables 35 Sq mm/ 16 Sq mm/10 sq mm for connecting earth to busbar, busbar to busbar and busbars to various equipments. Earth electrode of 17.20 mm Dia and 3.00 meter long high tensile low carbon steel circular rods molecularly bonded with copper

writer's laboratories (UL) 467-2007 or latest. Copper strips of 150 mm x 25 mm x 6 mm to be welded with each earth electrode, copper strips of 300 mm x 25 mm x 6 mm for main equip- potential busbar, copper strips of 150 mm x 25 mm x 6 mm sub equip-potential busbar in relay room, power room and panel room. GI strip 25 mm x 2 mm for ring formation of earth pits Earth enhancement material in bags for each Earth Electrode. Inspection chamber of site 300 mm x 300 mm x 300 mm (Inside dimension) of approximate 50 mm thick with pulling hooks to cover the earth pits. Note: The installation of this item shall be carried out by the contractor as per RDSO/SPN/197 Version 1.0 dtd. 04.07.2016 or latest and conforming to RDSO Drg. No. S DO/RDSO/E&B/001 or latest. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after execution and testing.

29 AJMER DIVISION-S AND T/NORTH WESTERN RLY Description:- Supply of Professional AC/DC clamp meter 3 ¾ digit, true RMS measurement, For Measurement of DC/AC currents up to 60A, AC/DC Voltage up to 600V, resistance up to 40 M, Current resolution 0.1mA for low current measurements, frequency up to 60 KHz and non-contact voltage measurement function with set of leads & carrying case. Model - SCM222 or equivalent/ higher make. Motwane/Stanlay/Fluke/Megger Inspection: Consignee Inspection Charges: None Payment Terms: 100% after Supply.

Description:- Supply of Handheld Digital Earth Clamp Tester for clamp on earth/ground resistance

leakage up to 20A. No spines required for measurement Model - DECT-2 or CET500 or equivalent / higher version make Motwane/Stanlay/Fluke/Megger. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after Supply.

Description:- Standard Tool kit for signal maintenance (suitable for RE area working) with following items (with small size canvas log) (i) Insulated combination plier of 8" = 1no. (ii) Insulated long nose plier of (road wise) 6" =1 no. ( iii) Insulated wise stroper plier of 6"=1 no ( iv) Insulated screw driver

spanner set (6 to 32mm) = 1 set (viii) Adjustable spanner set 8" =1 no (ix) Ball pin hammer 200 gm =1 no (x)Soldering iron 25 watt =1 no ( xi)Torch cell LED (3 cell) Eveready/jeep = 1no (xii) Auto ranging digital multi-meter (Branded) =1 no (xiii) Crow bar steel/ tommy bar =1 no Inspection: Consignee Inspection charges: None Payment terms: 100% after supply

per RDSO Drg. No. SDO/RDSO/E&B/001 or latest. Inspection: Consignee Inspection charges: Borne by Railways Payment terms: 70% after supply, 20% after installation & 10% after commissioning

approved by the site engineer incharge. Inspection: Consignee Inspection Charges: None Payment Terms: 100% after supply. S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () B-NS ITEMS 35610344.15 2998227.0 B 1.00 Station 2998227.00 AT Par 2998227.00 0 1 Description:- Alteration of Existing Application Logic Programme to suit Modified SIP at DAURAI Station. 2323529.0 B 1.00 Station 2323529.00 AT Par 2323529.00 0 2 Description:- Alteration of Existing Application Logic Programme to suit Modified SIP at BANGURGRAM Station. 1760632.0 B 3.00 Station 5281896.00 AT Par 5281896.00 0 3 Description:- Alteration of Existing Application Logic Programme to suit Modified SIP at SARADHANA, MANGALIYAWAS & KHARWA Stations. 1234564.0 B 1.00 Station 1234564.00 AT Par 1234564.00

Description:- Alteration to existing interface circuit diagram to suit Modified SIP at DAURAI Station. B 1.00 Station 956747.00 956747.00 AT Par 956747.00

MANGALIYAWAS & KHARWA Stations. B 1.00 Station 529099.00 529099.00 AT Par 529099.00 7 Description:- Factory Acceptance Test of EI System at DAURAI Station. B 1.00 Station 410035.00 410035.00 AT Par 410035.00 8 Description:- Factory Acceptance Test of EI System at BANGURGRAM Station.. B 3.00 Station 310700.00 932100.00 AT Par 932100.00

Stations. B 1.00 Station 352733.00 352733.00 AT Par 352733.00 10 Description:- Site Acceptance Test of EI System at DAURAI Station. AJMER DIVISION-S AND T/NORTH WESTERN RLY B 1.00 Station 273357.00 273357.00 AT Par 273357.00 11 Description:- Site Acceptance Test of EI System at BANGURGRAM Station. B 3.00 Station 207134.00 621402.00 AT Par 621402.00

SARADHANA, MANGALIYAWAS & KHARWA Stations. B 1.00 Station 250000.00 250000.00 AT Par 250000.00

& KHARWA Stations. Inspection-consignee. B 4.00 Numbers 127594.00 510376.00 AT Par 510376.00

SPHC-TT. at DAURAI, BANGURGRAM,SARADHANA, MANGALIYAWAS & KHARWA Stations Inspection- RDSO. B 6.00 Numbers 309175.00 1855050.00 AT Par 1855050.00

OPC at DAURAI, BANGURGRAM,SARADHANA, MANGALIYAWAS & KHARWA Stations Inspection-RDSO. B 14.00 Numbers 309175.00 4328450.00 AT Par 4328450.00

MTC at DAURAI, BANGURGRAM, SARADHANA, MANGALIYAWAS & KHARWA Stations Inspection-RDSO. B 5.00 Numbers 90301.00 451505.00 AT Par 451505.00

Accessories To Make EI System Alteration Functional at DAURAI, BANGURGRAM,SARADHANA, MANGALIYAWAS & KHARWA Stations. Inspection-consignee. B 10.00 Numbers 512948.00 5129480.00 AT Par 5129480.00

BANGURGRAM, SARADHANA, MANGALIYAWAS & KHARWA Stations. Inspection- RDSO. B 5.00 Numbers 512948.00 2564740.00 AT Par 2564740.00

BANGURGRAM, SARADHANA, MANGALIYAWAS & KHARWA Stations. Inspection-RDSO. B 5.00 Set 7405.43 37027.15 AT Par 37027.15 Description:- Releasing of existing SM's control panel including base plank and other gadgets

neatly at a place as instructed by railway representative at site. The resultant pit in the flooring shall be removed of all cable bits, leveled and cement plastered. Inspection-consignee. B 40.00 Numbers 4956.00 198240.00 AT Par 198240.00 Description:- Supply of Relay AC Immune Plug in type style QNNA1 DC Twin DC Neutral line 24-volt

and connector confirming to BRS 960, IRS:S@58"44@ S:60 and IRS S-23. The interlocking code for this unit shall be CDEHX.Inspection: - RDSO