Disaster and Rescue Equipments

Items

PA System Superior quality, PA 400SM with speaker, Micro Phone, One stand One Coil Wire

Telescope Ladder 20”-30’ Ft

Aluminum Ext. Ladder (20ft)

Aluminum Ladder 10ft

Shovels Superior Quality, small size.

Spade 10 Wooden handle

Rotary Hammer Drill Supreme Brand

Search Light YK YK 007

UTDRF Jacket sleeveless

Ram SET With foot pump Make Lucas Germany,Model-Ramp-422-Fpump-LH2/1,8-63-/8-70 Din

Portable inflatable emergency lighting system Model, AIT-4500 General with generator storage box . Rain protection cover, wing support tool kit, lum144p with requisite gear, blower & trolley

Hydraulic Jack 20 tonnes Badge jack toe jack , hydram France, model EHC 50 VHIp 250 foot pump pmp 392 hdr 2fh 10 tonnes

Diamond Chain Saw Selt powered petrol driven with spare chain I. Must operate at 6.3-6.5 hp @ 8500-9000 rpm with 92-95 cc engine of 2- stroke, single cylinder, air cooled II. Must have 0.26 gal (1 ltr) fuel tank, fuel to oil mix ration should be 25:1 (4% oil) III. Must have leaf spring starter along with momentary on-off switch to eliminate starter pawl hang-ups. IV. Must have PVC crankcase guard to protect saw from abrasion from concrete. V. Must have external mounted clutch for cooler operating temperature and easy cleaning VI. Must have tool free air filter cover to allow for easy inspection VII. Weight must not exceed 15 kg with bar and chain and full tank VIII. It shall be fitted with the double bumper diamond chain (force 3), which runs over the guide bar of 16 inch with a cutting depth of not less than 16 inch. The chain saw shall be capable of cutting RCC & embedded iron rod of 12 mm diameter. The same machine shall also offer option for 14’’bar and chain. IX. Must offer Seal Pro ®O-ring & bumper design for stretch reduction X. Must provide internal water routing for bar and chain lubrication XI. Must utilise rim drive sprocket XII. Must include wall walker ™ for reduced operator effort. XIII. Must have safety interlock trigger to prevent accidental starting XIV. Motor must have sealed cranked shaft and air filtration XV. Motor must have water resistant electronic ignition XVI. Overall height of bar must not exceed 5 inch XVII. Must have aluminium c rank case XVIII. Must have polyester air filtration design for wet cutting XIX. Must have rear ported air XX. Must include water hose tall with metal water hose fitting XXI. Water supply required by the chain while cutting shall be minimum 1.5 bar. Safety goggles &ear plucks shall be supplied. A pressurized manual stroke pump of 8-10 ltr capacity with minimum 2 mtr connected water hose shall be provided to for wet cutting of the diamond chain saw XXII. Spare diamond chain shall also be supplied.

Victim location camera with breaching system ( Specification as per the NIT uploaded)

Comealong (with all accessories) I. Come along system should be of steel or hard aluminium alloy consisting three major part i.e. Base, Mast & Boom II. The system should provide a safe secure anchorage for confined space entry,exit and rescue work. III. All adjustments should be on key plugs easy to assemble and dismantle without any tools. IV. The rated capacity in terms of working load should be more than 200 kg. V. The completed system should have compliance of European standard or should have certification from NABL Approved Lab for safety factor. VI. Tender should supply ascending, descending device/winch, accessory handle,rope rescue stretcher and full body harness along with system. VII. Ascending descending device/winch should work on rope feeding fall arrest 100 meter length. VIII. Ascension handle should be made up of light forged aluminium alloy IX. The handle grip should be comfortable with thermal insulation X. Rope should be made of polyamide XI. The breaking load of rope should be more than 24 Kn (with out end connection) and more than 18 KN (with end connection) XII. The rope diameter should be 9mm to 12 mm only. XIII. Rescue stretcher should be made up of fiber/light weight Aluminium alloy. XIV. It should be in bucket shape with sufficient number of straps to hold casualty. XV. It can be lifted vertically up down XVI. Full Body Harness should be complied with EN 361/368

Air Lifting Bag Airlifting bags should ve pneumatics appliance that can be used for variety of lifting purposes in rescue works in the wake of vehicle and railroad accidents, collapsed shelters or raod clearance workds amongst other situations. They can be slid into spaces below loads where normal jacks cannot ve positioned. They can be used over uneven ground surfaces where again normal jacks will be unstable and dangerous. They can be used to relocate, topple align and enable lifting by cranes or chain lifting systems. Whereas normal jacks concentrate the lifting energy over a small area, airlifting pressure over a much larger area. They should be easy in maintenance effort, durable and light weight. Scope of supply:- Each set of high pressure airligt bags is an air-jacking system comprising one bag in each of he 3 sizes in term of maximum lift capacities, i.e. a total of 3 bags PER SET, with accessories as indicated in para 3 below. The bags should all be square in shape. The individual sizes should range as per minimum lifting capacities indicated below in metric tons: MAX LIFTING CAP >10 Metric Tons>21 Metric Tons>=44 Metric Ton WEIGHT OF BAG(KG)<=4<=8<=15 THICKNESS (MM)<=25<=25<=25 MAX. LIFTING HEIGHT (cm)>=20>=28>=40

Dewatering pump set Sub-Spec ( Specification as per the NIT uploaded)

BRIJBASI FIRE SAFETY SYSTEMS PVT. LTD.