GE 861 EWS-18/2024-25

Amount

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

Demolition of brick or stone/boulders msonary, built in cement morter complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n/exe 15 cm thick below or above ground level complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not balking) removing serviceable tiles to store complete all as specified and directed.

Demolition of reinforced cement concrete of any description (reinforcement cut as reqd to facilitate demolition ) complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n/exe 1.50 Sqm each complete all as specified and directed.

Taking down shutter of any description exe 1.00 sqm but n/exe 2.00 sqm each complete all as specified and directed.

Taking down shutter of any description n/exe 1.00 sqm each complete all as specified and directed.

M&L for brick work with sub class ‘B’ brick straight or curved on plan exceeding 6m mean radius in CM 1:4 complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cementcomplete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 finishing on brick or concrete surfaces finished even & smooth without using extra cementcomplete all as specified and directed.

M&L for RCC (nominl mix )(1:2:4) type B1 (using 20 mm graded aggregate) as in slabs supooirted on walls, beams,and columns etc complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs, floors,slabs , landing and similar works etc complete all as specified and directed.

Form work to edge of concrete, flats, treads, breaks in floors, window cills, concrete raillings, opening in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, slabs etc horizontal or sloping and similar works exc 10cm but n exc 20 cm wide all as specified as directed

M&L for MS TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for columns, hooking end and binding with and including mild steel wire (annealed) not less than 0.9mm dia.complete all as specified and directed.

M&L for 25 mm th PCC type B0 (1:2:4) using 12.5 mm graded aggregagte as in floor to receive floor finishes etc.complete all as specified and directed.

S&F vitrified ceramic dark shade/double charged/ultra charged/Granite /Marble /wood textures coloured tiles 10mm thick (square/rectangular) polished,area of each tiles exc 0.36 sqm b n exc 0.42 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm th screed bed in CM 1:6 complete all as specified and directed.

M&L for non skid ceramic coloured joint free tiles 7to 8mm thick (square/ rectangular), area of each tiles exceeding 0.11 sqm but n exc 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15 mm thick in cement mortar (1:6) laying floor finish complete all as specified and directed.

M&L for non skid ceramic coloured joint free tiles 7to 8mm thick (square/ rectangular), area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15 mm thick in cement mortar (1:6) laying floor finish complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 350 x250x7/ 450x350x7 mm thick , set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 10mm thick cement plaster in cm (1:4) all complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L for treatment to sunken slab by applying evenly a coat of blown type bitumen at the rate of 1.50 kg per Sqm and binding with clean dry sand @ 0.05 cum per sqm complete all as specified and directed.

M&L for polyetheline film, 150 micron thick, laid on a coat of bitumen primer @ 0.30 to 0.50 kg per Sqm complete all as specified and directed.

M&L for 100mm tick PCC 1:2:4 type B1 20mm graded aggregate as in padding of sunken slabs etc to required in slope in sunken finished even and smooth without using extra cement complete all as specified and directed.

M&L for kota stone slab flooring 18-20 mm th over cement screed base laid and jointed with grey cement slurry mixed with pigment to match th shade of the slab including rubbing and polishing laid over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

All as per serial item No 25 above herewith-in-before but on vertical surfaces of walls /skirting/dado etc over 10mm thick cement plaster in 1:4complete all as specified and directed.

M&L in reapir for 20mm thick pre-polished granite slabs, machine cut, in vertical/horizontal surfaces including over 15mm thick cement plaster (1:4) and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of the granite stone including grinding and polishing complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm single side prelam PVC sheet reinforced with MS square tube manufactured as per SSR Part-I specifications and drawings and complete all as specified and directed. Note :-Contract agreement No and year will be mentioned on door frame before execution with permanent marker.

S&F factory made soild PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and gap isert for top rail and bottom rail paneling of plain colour PVC to sheet to be fitted in the MS frame welded / sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed. Note :-Contract agreement No and year will be mentioned on back side door shutter before execution with permanent marker.

S&F 2nd class hard wood 40 mm thick panelled shutter Plain framed, panelled shutter (one panel) with lock rail and panel of 9 mmB.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated and fixed to chowkhats complete all as specified and directed. Note :-Contract agreement No and year will be mentioned on back side shutter before execution with permanent marker.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc (internal sash bars) edges of framing plane, chamfered or rounded fitted and mitered beads for securing glass etc size of members as specified in SSR Part-I Section 8 clause 8.24(a) (kail) complete all as specified and directed. Note :-Contract agreement No and year will be mentioned on back side shutter before execution with permanent marker.

S&F for 30 mm thick 2nd class hard wood glazed and skeleton windows/ ventilators shutters open rebated and prepared to receive glass, gauge etc , devide into square with plain chamferred or rounded, mitered and rebated sash bars any numbers , provided with stiles and rails as specified in SSR part I section 8 clause 8.24 (b). complete all as specified and directed. Note :-Contract agreement No and year will be mentioned on back side shutter before execution with permanent marker.

S&F aluminium anodised barrel tower bolts extruded section of size 150 mmlong , complete all as specified and directed.

S&F aluminium anodised barrel tower bolts extruded section of size 200 mm, complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed.

S&F for butt hinges 75 mm medium weight cold rolled mild steel complete all as specified and directed.

S&F MS red tail spring including roller & roller plate complete 300 mm size complete all as specified & directed.

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodished with hard drawn steel spring complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aparture 1.18 mm complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aparture 1.18 mm complete all as specified and directed.

S&F aluminium handle extruded fabricate type anodised of size 150 mm complete all as specified and directed.

S&F for butt hinges 100mm medium weight cold rolled mild steel complete all as specified and directed.

M&L for fixed in repair 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane including hacking out old complete all as specified and directed.

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.

Dismantling water storage tanks of any description,exc 250 & n.exc 500 litres capacity and removing from site complete all as specified and directed.

S&F for rotational moulded polythylene 500 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer white in colour hoisted and fixed in position including 20mm ball valve high prressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. Note :-Contract agreement No and year will be mentioned on rotational moulded polythylene 500 litres before execution with red colour paint.

S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connections of flush pipe to squat pattern closet including lime concrete bedding and all joint making good to the floor complete all as specified and directed.

S&F in repair vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (min), with grating and union for discharge pipe including flushing system, flush pipe & wate pipe) all as specified & directed. Note :-Contract agreement No and year will be mentioned on vitreous china bowl urinal flat back before execution with red colour paint.

S&F repairs floor stainless steel gratings , 125mm dia. complete all as specified and directed.

S&F in repair PVC valveless 10 litre capacity syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed. Note :-Contract agreement No and year will be mentioned on flushing cistern before execution with red colour paint.

S&F in repair Vitreous china wash hand basin, Vitreous china white, flat back, size 550 x 400 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. (Including 15mm bore CP pillar tap, waste coupling and 32mm dia PVC waste pipe) complete all as specified and directed. Note :-Contract agreement No and year will be mentioned on Vitreous china white, flat back, size 550 x 400 mm before execution with red colour paint.

S&F in repairs 15 mm size PV C connection with PTMT nuts of 600 mm long complete all as specified and directed.

S&F in repairs swivel shower of PTMT any colour with arm, 195 mm long with bend of 45 degree with flange (both min wt 80 gms ) complete all as specified and directed.

S&F 110 PVC WC connector bent type complete all as specified and directed.

S&F cost iron Nahani trap 75 mm dia including jointing to pipe complete all as specified and directed.

S&F in repairs 15 mm bore fency type CP bib taps cast copper alloy with crutch or butterfly nuts , handle, screwed down for iron pipe complete all as specified and directed. Note :-Contract agreement No and year will be mentioned on bib taps before execution with red colour paint.

S&F in repairs, 15 mm bore CP stop valve cost copper alloy screwed down , high pressure with crutch or butterfly handle fency type complete all as specified and directed. Note :-Contract agreement No and year will be mentioned on stop valve before execution with red colour paint.

S&F in repairs, 15 mm bore CP stop valve fancy type, chromium plated with long shank and cup (concealed type) cost copper alloy screwed down, high pressure fency type complete all as specified and directed. Note :-Contract agreement No and year will be mentioned on stop valve before execution with red colour paint.

Taking up or down 15mm d ia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm d ia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm bore GI tubing medium grade galvanished with all fittings and fixed complete to walls & floors etc complete all as specified and directed.

S&F 20 mm bore GI tubing medium grade galvanished with all fittings and fixed complete to walls & floors etc complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail with brackets, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed. Note :-Contract agreement No and year will be mentioned on tubular towel rail before execution with red colour paint.

S&F in reapired vitreous china wash down water closet pan ( pedestal pattern ) white complete including ‘P’ or ‘S’ trap , seat cover and fixing to flushing cistern, brackets, flushing pipe etc complete all as specified and directed.

S&F in repair 15 mm bore brass CP mixer for mixing hot and cold water screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed. Note :-Contract agreement No and year will be mentioned on CP mixer before execution with red colour paint.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod and highdensity plastic ball screwed for 20mm dia iron pipe and fixed (minimum wieght 15mm-142gms/20mm 210gms/25mm 455gms/40mm 690 gram complete all as specified and directed. Note :-Contract agreement No and year will be mentioned on ball valve before execution with red colour paint.

S&F in reapirs pillar tap 15mm chromium plated fancy type cast cooper alloy with crutch or butter fly handle, screwed down for iron pipe and fixed complete all as specified and directed. Note :-Contract agreement No and year will be mentioned on pillar tap before execution with red colour paint.

S&F in reapir bib tap 15mm PTMT any colour high pressure screwed down for iron pipe and fixed ( Minimum weight 90gms) complete all as specified and directed. Note :-Contract agreement No and year will be mentioned on bib tap before execution with red colour paint.

S&F in repair 20 mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe & fixed complete all as specified and directed. Note :-Contract agreement No and year will be mentioned on gun metal globe or gate valve before execution with red colour paint.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor complete all as specified and directed.

S&F in repairs 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and directed. Note :-Contract agreement No and year will be mentioned on vent cowl before execution with red colour paint.

S&F 75mm PVC (SWR) vent cowl complete all as specified and directed. Note :-Contract agreement No and year will be mentioned on vent cowl before execution with red colour paint.

M&L for preparing plastered or un plastered new surface of walls and applying two coats of cement base paint on walls after applying a coat of alkali-resistant primer complete all as specified and directed.

M&L for applying 3mm thick wall care putty on wall including preparation new surfaces plastered or unplastered surfaces complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of Priming plastered and other surfaces with alkali?resistant priming paint complete all as specified and directed.

M&L for preparing plastered or un plastered new surface of walls and applying three coats of white wash on walls complete all as specified and directed.

M&L for 50mm thick PCC ( 1:3:6) type C-2 using 40mm garde stone aggregate as in plinth protection etc complete all as specified and directed.

M&L for plastered or un plastered OLD SURFACES of walls and applying two coats of cement base paint on walls.(External) including removal of existing treatment complete all as specified and directed.

M&L for applying one coat of cement base paint to old treated plastered or un-plastered surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and gresay spots) complete all as specified and directed.

M&L for applying one coat of OBD to old treated surfaces of wall including preparation of old surface of walls (by washing down,rubbing down and stopping of distempered surface),complete all as specified and directed.

M&L for prepration of old painted wooden surfaces and applying one coat of synthetic enamel paint of any description, not otherwise described, over 10 cm width or girth including preparaton of surfaces complete all as specified and directed.

M&L for preparation of old decorated CGI Sheet surfaces of any descrption not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel pait (in comoflying/plain pattern) complete all as specified and as directed.

Taking down copper/aluminium point wiring light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed.

M&L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and including PVC casing and capping/Conduit medium grade of suitable size run on wall/surface with all fittings controlled by one switch including CI/MS sunk box of required size or PVC Gang Box all as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

All as per srl item No 89 here in above but for one 3 pin 5Amp socket outlet independent controlled by one switch.

All as per srl item No 89 here in above but for one 5Amp socket outlet on the same board controlled by one switch.

All as per srl item No 89 here in above but for one 3 pin 15 amp socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green color) as earth lead complete all as specified and directed.

M&L for submain wiring with two single core PVC insulated flexible copper conductor cable of size 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in & including concealed PVC casing capping medium grade 2mm thickness ISI marked or cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification incl taking down old unsvcomplete all as specified and directed.

M&L for submain wiring with two single core PVC insulated flexible copper conductor cable of size 6 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & including concealed PVC casing capping medium grade 2mm thickness ISI marked cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification incl taking down old unsv complete all as specified and directed.

M&L for (in repair) switch piano flush button single pole one way 5 amp 240 volts complete all as specified and directed.

M&L for (in repair) switch Socket combination, 6 pin 5 and 15 amp multi purpose 2 in 01 flush type, 230 volts complete all as specified and directed.

M&L for (in repair) switch Socket combination 2 in 1, 5 Amp flush type, 230 volts complete all as specified and directed.

M&L for (in repair) socket 2 in 1, 5 Amp flush type, 230 volts complete all as specified and directed.

M&L for (in repair) socket 5/15 Amp flush type, 230 volts complete all as specified and directed.

M&L for (in repair) ceiling rose surface Bakelite 2 to 3 terminals complete all as specified and directed.

M&L for (in repair) switch piano flush button single pole one way 15 amp 240 volts complete all as specified and directed.

S&F for (in repair) fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically all as required at site complete all as specified and directed.

S&F for (in repair) lamp holder insulated body with back plate for batten fittings complete all as specified and directed.

S&F for (in repair) bell push flush type 6 amp 240 Volt complete all as specified and directed.

S&F for (in repair) bell/buzzer AC 230 volts single pole complete all as specified and directed.

S&F for (in repair) plug top 3 pin 15 amp 230 volts including taking old plug top complete all as directed

S&F for (in repair) plug top 3 pin 5 amp 230 volts including taking old plug top complete all as directed.

S&F (in repair) rigid non-metallic PVC conduit of size 20 mm dia, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specifed and directed.

S&F rigid non-metallic PVC conduit of size 25 mm dia, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed.

S&F (in repair) medium grade PVC cassing and capping of size 20 mm dia, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc including taking down old unsv casing & caping complete all as directed. Note :- Contract agreement No and year will be mentioned on PVC cassing and capping before execution with permanent marker.

S&F (in repair) PVC gang box surface type suitable for fixing of 5 pin 15 Amp multipurpose switch socket on wall complete all as specified and directed. Note :- Contract agreement No and year will be mentioned on it before execution with permanent marker.

S&F (in repair) PVC Gang box surface type suitable for fixing of 5 pin 5 Amp multipurpose switch socket on wall complete all as specified and directed. Note :- Contract agreement No and year will be mentioned on it before execution with permanent marker.

S&F in replacement cable PVC FR insulated unsheathed with flexible multistranded copper conductor of size 1.5 Sqmm 1100 Volts grade as per site requirement of existing colour coding adopted complete all as specified and directed.

S&F in replacement cable PVC FR insulated unsheathed with flexible multistranded copper conductor of size 2.5 Sqmm 1100 Volts grade as per site requirement of existing colour coding adopted complete all as specified and directed.

Supply and laying in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular twin core 4 sq. mm complete all as specified and directed.

Supply and laying in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular twin core 6 sq. mm complete all as specified and directed.

Supply and laying in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flator circular twin core 10 sq. mm complete all as specified and directed.

Supply and laying in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular twin core 16 sq. mm complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Note :- Contract agreement No and year will be mentioned on LED light fitting before execution with permanent marker.

S&F LED lights fitting 1x20W, 230V, AC decorative box type with drive, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Note :- Contract agreement No and year will be mentioned on LED light fitting before execution with permanent marker.

Taking down old Unserviceable building security light fitting and taken as credit including S&F building security light fitting LED 25Watt new generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaries with high power LED as light source along with suitable bracket incl all accessories complete all as specified and directed. Note :- Contract agreement No and year will be mentioned on LED light fitting before execution with permanent marker.

Taking down old/UNSV Flood lights and S&F LED Flood light of 30 watt Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light with high power LEDs as light source, suitable for highlighting architectural features or Area Lighting. Also suitable to rough services/installations complete with all accessories etc including connecting with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Note :- Contract agreement No and year will be mentioned on LED light fitting before execution with permanent marker.

S&F LED luminaire 600 mm x 600 mm, 36 watt( White/ Warm White) , 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Note :- Contract agreement No and year will be mentioned on LED light fitting before execution with permanent marker.

Supply, Installation, testing and commissioning of Efficient LED surface 2x2 luminaire 36 watt fitting ( warm white/ white ) to enhance the delight of occupants with comfortable experience through its classic design & glare free soft illumination White powder coated CRCA housing with seamless front frame with flat non-yellowish diffuser, including necessary connection from ceiling rose to fitting with flexible copper cable of suitable size/core all as specified and as directed. Note :- Contract agreement No and year will be mentioned on LED light fitting before execution with permanent marker.

S&F sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Note :- Contract agreement No and year will be mentioned on it before execution with permanent marker.

S&F MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amp rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Note :- Contract agreement No and year will be mentioned on it before execution with permanent marker.

S&F MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amp rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Note :- Contract agreement No and year will be mentioned on it before execution with permanent marker.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 amp in the MCB DB Complete with connection testing and commissioning all as specified and directed Note :- Contract agreement No and year will be mentioned on it before execution with permanent marker.

S&F 240V, 10KA 'B' curve miniature circuit breaker (MCB) of current carrying SPN 32 amp capacity in the MCB DB complete with connection testing and commissioning all as specified and directed Note :- Contract agreement No and year will be mentioned on it before execution with permanent marker.

S&F 240V, 10KA 'C' curve miniature circuit breaker (MCB) of current carrying SPN 40-63 amp capacity in the MCB DB complete with connection testing and commissioning all as specified and directed Note :- Contract agreement No and year will be mentioned on it before execution with permanent marker.

S&F 415V 10KA 'B' curve miniature circuit breaker (MCB) of current carrying capacity TPN 40 to 100 amp in the DB complete with connection testing and commissioning complete all as specified and directed. Note :- Contract agreement No and year will be mentioned on it before execution with permanent marker.

S&F MCCB 4 Pole, 415 V, Adjustable type, 100 amp with breaking capacity 16 KA complete all as specified and directed. Note :- Contract agreement No and year will be mentioned on it before execution with permanent marker.

M&L for painting of ceiling fan complete , using spray gun, in site with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust complete all as specified and directed. Note :- Contract agreement No and year will be mentioned on rod of ceiling fan before painting with permanent marker.

Replacement of capacitor 2/3.15 mfd AC 230 volts 50 Hz complete all as specified and directed.

Replacement of capacitor 4 mfd AC 230 volts 50 Hz complete all as specified and directed.

Replacement of ball bearing for ceiling fan /exhaust fan any size any make complete all as specified and directed.

Replacement of gun metal bush with suitable size, gun metal bush for ceiling fan any make, any size and sweep complete all as specified and directed.

Rewinding of AC ceiling fan/wall mounting fan motor as existing at site any make with super enamelled copper winding wire any gauge from 0.315mm to 0.193mm including cutting of old burnt winding. Sleeve work varnishing with `B' class insulation varnish, connection with flexible wire of appropriate size two core copper wire upto connector block qty of copper winding wire not less than 350 grms and not more than 500 grms per fan motor , replacment of capacitor 2 mfd, complete all as specified and directed. Note :- Contract agreement No and year will be mentioned on it before fixing with permanent marker.

Rewinding of exhaust fan motor any size, from 225 to 300 mm sweep with supper enamelled copper wire of any size ranging from 0.500mm to 0.285 mm including necessary cutting of old burnt winding wire, cleaning of slots and provision of necessary threading/sleeve work and taking out connection in lead with PVC copper wire of appropriate size upto connector block, capacitor 2/3.15 mfd complete and all as specified Note :- Contract agreement No and year will be mentioned on it before fixing with permanent marker.

Taking down carefully geyser 25/35/50 ltrs capacity from wall after unscrewing nuts/bolts etc. and again refixing in position after repair and replacement of spare parts including testing complete all as specified and directed. (spare parts shall be measured and paid for separately under respective items Note :- Contract agreement No and year will be mentioned on it before fixing with permanent marker.

Replacement of unserviceable heating element AC 230 Volt of rating 1500W ISI mark (tringular/round) as per existing any type complete all as specified and directed.

Replacement of unserviceable heating element AC 230 Volt of rating 2000W ISI mark (tringular/round) as per existing any type complete all as specified and directed.

Replacement of unserviceable thermostat switch AC 230 Volt adjustable range from 0-90 degree Celsius complete all as specified and directed.

Replacement of unserviceable Indicator lamp round/square type suitable for geyser 25-50 ltrs all as per sample AC 230 Volts complete all as specified and directed.

Replacement of unserviceable auto cut switch suitable for geyser 25-50 ltrs all as per sample AC 230 Volts complete all as specified and directed.

Replacement of unserviceable geyser assembly suitable for geyser 25-50 ltrs all as per sample AC 230 Volts complete all as specified and directed.

Replacement of flexible PVC connection pipe heavy duty suitable for hot water to bear the temp of 100 degree centigrade with outlet and inlet connection brass adopters , washers of size 450 mm long 15 mm dia bore complete all as specified and directed.

S&F of LED 7 watt pin type bulb complete all as specified and directed. Note :- Contract agreement No and year will be mentioned on it before fixing with permanent marker.

Dismantling existing UNSV hylam sheet of any size from boards removing switches etc. S&F hylam sheet 3mm thick including necessary cutting of suitable opening for switches, sockets, regulators, etc refixing of switches, sockets, regulators, etc replacing screws and connecting up and testing complete all as specified and directed.

Supply and install decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base including 12 watt LED Lamp with necessary connection of suitable size copper cable complete all as specified and directed. Note :- Contract agreement No and year will be mentioned on it before fixing with permanent marker.

S&F LED Bulkhead 7 watt ,designed for modern homes available in non PIR as well as PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer with necessary connection of suitable size copper cable complete all as specified and directed. Note :- Contract agreement No and year will be mentioned on it before fixing with permanent marker.

S&F PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt 3 x 1.0 sqmm drawn through pole from junction box to security light fitting complete all as specified and directed.

M&L for earthing complete with galvanised cast iron earth plate electrode of size 600x600x6.0mm thick busied directly in ground less than 3.0m deep below normal ground level as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI strip 32x6 mm dia as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shora all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or directed by Engineer-in-charge and incl testing on completion. (i) Main earthing lead from earth plate electrode to test point up to length of 7.5 meters length shall deem to be included in the unit rate quoted against this item . (ii) GI protection pipe & earthing lead beyond 7.5 meter shall be measured and paid for separately under appropriate item of Sch A part-IV (Sec-I) . (iii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department .

M/S SHEIKH FEROOZ AHMAD

BHAT CONSTRUCTIONS AND BUILFERS

M/S Hilal Builders

M/S A Q ENTERPRISES

M/S AK ENTERPRISES

M/S GASSI CONSTRUCTION AND CO

FIRDOUS AHMAD BABA

M/S Manzoor and Co