REPAIR AND MAINT TO BOUNDARY WALL DRAIN CULVERT FOOTPATH FENCING ETC AND OTHER RELATED MISC BR WORK IN MD ACCN OF OFFRS JCOS AND PBORS OLD BUTCHERY AREA MES COLONY OLD COI PAO BRC LAO DEO OLD SUPPLY DEPOT AREA, 6 DIET 5PSS SEC AND PERIODICAL SERVICES

Amount

M&L for preparation of old decorated surfaces of walls by washing, rubbing down and scrapping of distemper surfaces and applying one coat of Oil Bound Distemper of any light shade complete all as specified and directed.

All as per item No 1.00 mentioned here in before but on ceiling surfaces..

Taking down cement plaster from brick/concrete wall/ceiling surfaces including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.

M&L Rendering 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed .

M&L for applying two coats of elastomeric water proofing coating on lower portion of wall brick/concrete surface with Dam block 2K of Asian paints or Pidifin 2K of pidilite or equivalent to FOSROC, Sika etc complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including preparation complete all as specified and directed.

M&L for preparation of new plastered surface of wall applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L for preparation of new/old plastered surface on ceiling applying two coats of oil bound distemper on ceilingover a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L for preparation of old decorated plastered/unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, and efflorescent salts and trading oil and greasy spots and applying two coat of white washing complete all as specified and as directed.

~Ditto~ all as per Item No 14.00 mentioned here-in-above but on ceiling surfaces complete all as specified and as directed.

M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and as directed.

M&L for preparation of old decorated plastered/ unplastered surfaces of walls of any description by washing, rubbing down and applying one coat of cement base paint complete as specified and directed.

M&L for preparation of old decorated plastered/ unplastered surfaces of walls/Chhajja of any description by washing, rubbing down and applying two coat of cement base paint complete as specified and directed.

M&L for preparation of old/new decorated plastered/ unplastered surfaces of external walls of any description by washing, rubbing down and applying two coats of weather coat paint complete as specified and directed.

Cleaning, removing all scale, dust, dirt and elgy using wire/jute brush from inside of RCC/PVC tanks and connected pipe removing to a distance of not less than 250mtrs, washing the tank/pipe with bleaching power solution and finally applying 2% potassium permangnate solution for disinfection, including marking with black paint on white base on tank "Tank cleaned on ____ Dt_____". Capacity 500 Ltrs all as directed by Engr-in-Charge.

All as per item No 20.00 above but capacity 1000 litres.

S&F in repair 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball srewed for iron pipe and fixed (minium weight 20mm-210) gms complete all as specified and directed.

M&L for writing letters or figures (Block Roman, Italic or Indian) not exceeding 30 cm heights with synthetic enamel paint including preparing of old painted sufrace complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) all as specified and directed

Demolition of cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete.

Demolition of reinforcement cement Concrete of any description and in any position not otherwise specifically provided for columns, beams, lintels, slab etc complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) all as specified

~Ditto~ all as per item No. 28 above but except bricks.

M & L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), as in copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M&L plain cement concrete nominal mix 1:3:6 type B-1 using 20mm graded stone aggreagate as in surface channel drain including neccssary form work as required complete all as specified as directed.

M&L 40 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded aggregate as in floors including finishing the surface even & smooth without using extra cement complete all as specified and directed.

S&F Glass dividing strips, 3 mm thick and 28 mm wide complete all as specified and directed.

M&L Reinforced cement concrete nominal mix 1:2:4 type B-1 using 20mm graded stone aggreagate as in slab supported on wall, beam in coloumn in floor landing, balconies canopies deck slab and in shelves complete all as specified & directed.

Use and waste form work to soffits of slab such as roof slab, floor slab, landing shelves similar work etc rough finished surface of cocrete complete all as specified & directed.

M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cracking, bending, spirally for hopping for columns hookings ends and binding with and incl mild steel wire (annealed) not less the 0.9mm dia or securing with clips complete.

M&L hard core of broken bricks of gauge n exc 63mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling, sub base and mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L for 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed by Engineer-in-Charge.

M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed.

Dismantling of tiles/stone slabs of any description or thickness, laid dry or laid dry and pointed in floors, aprons etc

M&L for pre-cast cement concrete type B1 1:2:4 (20 mm graded stone aggregate) as in kerb stone block set in cement mortar 1:6, complete

M&L for Chequered cement concrete tiles (in any shade) 20cmx20cmx25mm thick, set, jointed and pointed with grey cement and pigment in floors over 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for vitrified heavy duty (dura stone) tiles 300x300x9 to 10 mm thick in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L 15 mm thick cement plaster on other than fair faces of bricks work or concrete surfaces in cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified

M&L Mild steel framed work as in doors or gates of angles or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete incl pintel hinges, stops hand made sliding bolts etc conforming to Fe 410-W (Gde-E-250) quality-A,

Dismantling posts or struts (wood or steel or RCC) any section including taking out embedded portion and making good disturbed ground surfaces.

Dismantling of fencing wire mesh any type

Excavation in post holes (or similar holes each n exc 0.5 cum and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 mtr and making good surface in soft/loose soil.

S&F MS angle Iron as in fencing posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc conforming to Fe 410-O or Fe 310-O complete all as specified and directed.

S&F MS work conforming to Fe 310-O as in FI fillets for securing chain link fencing, angle iron horns, posts, etc cut to length bent to shape with necessary cuts, drilling holes etc all as specified.

Supply only chain link fencing of MS GI wire mesh, 3mm dia of GI wire mesh up to into mattresses or cages lapped wired incl. staple etc complete all as specified.

Fixing only chain link fencing of any mesh size/any type incl. link wire to any type of standard rails/supports etc & straining bolt etc incl. provision of binding wire complete all as specified.

S & F for round bar 10mm dia conforming to Fe 290 Gde E-165 as line wire for chain link fencing. Note : Cutting to length, bent to shape required including binding wire.

S&F in repair mild steel, screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, exc 5cm but not exceeding 10cm long and dia of shank 05 to 10mm all as specified and directed.

S&F in repair Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or typing at crossing with and provision of galvanised MS wire stapples or steel pins etc as directed (each line wire to be measured).

M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete

M&L 300mm dia Reinforced concrete pipes, class NP2, laid and jointed on concrete bed including PCC 1:4:8 type D-2( 40mm graded crushed stone aggregate) packing under and haunching against the side of pipe after they are laid and tested complete with collars all as specified and directed

M/s Naresh Chand Agrawal

HARINANDAN RAI SONS

RAJ AND SONS

M/S PRAVIN ENTERPRISES

M/S Priya Trading Agency

M/S ANAND MOHAN ENTERPRISES

Vijay Bakshi and Son

jaglalchoudharyandsons