REPAIR / REPLACEMENT TO SECURITY LIGHTS / STREET LIGHTS / AREA LIGHTS / GATE LIGHTS, HIGH MAST AND CONTROLLING PANELS INCLUDING CONNECTING WORKS SMQ, OTM AND HQTC AREA AND REPAIR/ REPLACEMENT OF EXTERNAL WATER SUPPLY DISTRIBUTION LINES AND RISING MAI

Amount

Taking down existing defective/ unserviceable street light fittings /security light fittings/ flood light fittings of any capacity, any description, any wattage, any type and in any position from poles /pipes/ walls of buildings of any height complete after disconnecting the electrical connection replacement of unserviceable /damaged/ broken spare parts/ brackets etc., re-assembling the fittings and making the light fittings serviceable, fixing the fittings in same position, connecting to electric supply and its testing on installation complete all as specified and as directed by Engr-in-charge.

Taking down existing defective /unserviceable post top lanterns /gate lights /garden lights fitting of any capacity, any description, any wattage, any type and in any position fixed at a height not more than 4m from ground level complete after disconnecting the electrical connection replacement of unserviceable /damaged / broken spare parts, accessories etc., re-assembling the fittings and making the light fittings serviceable, fixing the fittings in same position, connecting to electric supply and its testing on installation complete all as specified and as directed by Engr-in-charge.

Lowering and lifting of carriage of high mast lights fitting with wire rope motorised or manually existing defective/ unserviceable high mast lights fittings of any capacity, any description, any wattage, any type, any position and any height after disconnecting the electrical connection replacement of unserviceable /damaged/ broken spare parts/ accessories etc., including servicing of High mast of any height and description, opening the mechanical hoisting / lowering assy, steel wire bobbin, replacing the unserviceable meshing gear, easying the steel rope movements, checking the locking mechanism, replaceing of oil, greasing complete and checking for smoothing operation of the mast, re-assembling the high mast lights fittings and making the high mast lights fittings serviceable, fixing the fittings in same position, connecting to electric supply and its testing on installation complete all as specified and as directed by Engr-in-charge.

Supply and fix for high energy efficient constant current electronic driver suitable for LED street light fitting 35 Watts, LED luminaires 240 Volt, 50Hz, AC single phase complete all as specified and as directed by Engr-in-charge.

Supply and fix for high energy efficient constant current electronic driver suitable for LED street light fitting 45 Watts, LED luminaires 240 Volt, 50Hz, AC single phase complete all as specified and as directed by Engr-in-charge.

Supply and fix for high energy efficient constant current electronic driver suitable for LED street light fitting 90 Watts, LED luminaires 240 Volt, 50Hz, AC single phase complete all as specified and as directed by Engr-in-charge.

Supply and fix for high energy efficient constant current electronic driver suitable for LED street light fitting 100 Watts, LED luminaires 240 Volt, 50Hz, AC single phase complete all as specified and as directed by Engr-in-charge.

Supply and fix for high energy efficient constant current electronic driver suitable for LED flood light fitting 30 Watts, LED luminaires 240 Volt, 50Hz, AC single phase complete all as specified and as directed by Engr-in-charge.

Supply and fix for high energy efficient constant current electronic driver suitable for LED flood light fitting 50 Watts, LED luminaires 240 Volt, 50Hz, AC single phase complete all as specified and as directed by Engr-in-charge.

Supply and fix for high energy efficient constant current electronic driver suitable for LED flood light fitting 60 Watts, LED luminaires 240 Volt, 50Hz, AC single phase complete all as specified and as directed by Engr-in-charge.

Supply and fix for high energy efficient constant current electronic driver suitable for LED flood light fitting 200 Watts, LED luminaires 240 Volt, 50Hz, AC single phase complete all as specified and as directed by Engr-in-charge.

Material and labour for opening the LED street light/ flood light fittings of capacity 30 Watts to 60 Watts, any type and in any position, taking out the LED mother board, checking the power LED's, replacing the unserviceable motherboard, electronic driver, power LED's and soldering or any item as per requirement and making the light fittings serviceable in any way and fixing the fittings in same position including testing, complete all as specified and as directed by Engr-in-charge.

Material and labour for opening the LED street light/ flood light fittings of capacity 90 Watts to 200 Watts, any type and in any position, taking out the LED motherbaord, checking the power LED's, replacing the unserviceable motherboard, electronic driver, power LED's and soldering or any item as per requirement and making the light fittings serviceable in any way and fixing the fittings in same position including testing complete all as specified and as directed by Engr-in-charge.

Material and labour for dismantling the three phase motor upto 5 HP, 440 Volt, 50Hz, AC of high mast lights fittings and taking out to workshop for re-winding, removing the burntout windings, re-winding the same with super enamelled copper wire of existing guage, varnishing and oven drying and replacing any item as per requirement, assembling the motor including testing, making the motor serviceable in any way and fixing the motor in same position complete all as specified and as directed by Engr-in-charge.

Disconnecting and taking out old rusted/ unserviceable light fitting’s bracket including FI clamps of any description and in any position and supplying and fixing brackets made out of 50mm dia light grade GI pipe 1.50m long bent to shape and size as per site requirement for fixing of street light fitting on poles/ walls including Flat Iron clamps-02 Nos of size 30x5mm made to shape including nuts, bolts and washers complete all as specified and as directed by Engr-in-charge.

Disconnecting and taking out old rusted pipe and material and labour for 40mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc., including Flat Iron clamps-02 Nos of size 30x5mm, with nut bolt and washers complete all as specified and as directed by Engr-in-charge.

Disconnecting and taking out old rusted pipe and material and labour for 50mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc., including Flat Iron clamps-02 Nos of size 30x5mm, with nut bolt and washers complete all as specified and as directed by Engr-in-charge.

Disconnecting and taking out old existing unserviceable PVC cable loop box and supplying and fixing with pole PVC cable loop box, size not less than 200x140x95mm, outdoor type, IP 65 including 4 Nos aluminium bus bar of size 25x5mm mounted on porcelain insulators with one MCB SP 6 Amps 230 volts connected to street light fitting submain wire and using FI clamps of size 20x3mm for fixing of PVC cable loop box with pole, including nuts, bolts and washers and connecting the cables to bus bars with using suitable size GI nuts, bolts and washers and aluminium lugs etc., complete all as specified and as directed by Engr-in-charge.

Disconnecting and taking out old existing unserviceable PVC cable loop box and supplying and fixing with pole PVC cable loop box, size not less than 145x145x95mm, out door type, IP-65 including porcelain insulated connectors for incoming and outgoing 4 core cables with one MCB SP 6 Amps 230 volts connected to street light fitting sub main wire and using FI clamps of size 20x3mm for fixing of PVC cable loop box with pole, including nuts, bolts and washers and connecting the cables to connectors with using suitable size GI nuts, bolts and washers and aluminium lugs etc., complete all as specified and as directed by Engr-in-charge.

Material and labour for sub main wiring from street light fitting to junction box with two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 1.5 sqmm in and including heavy grade PVC conduit and its accessories with fixing arrangements on pole surface, wall, ceiling etc., including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and as directed by Engr-in-charge. Note: One run of earth continuity conductor, one run of PVC conduit and two run of copper conductor together taken as one length for measuring unit length.

Supply and fix for single core PVC insulated FR cable with multistranded copper conductor of size 2.5 sqmm cross sectional area 1100 Volts grade, fixed in repairs complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs MCB SP, 6-32A, 240V, 50Hz, 10kA, 'B' type, for street light fittings complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs MCB SPN 32A, 240V, 50Hz, 10kA, 'B' type, suitable for existing timer control board complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs MCB TPN, 63A, 415V, 50Hz, 10kA, 'B' type, suitable for existing timer control board complete all as specified and as directed by Engr-in-charge.

Supply and fix for MCCB, 4 poles 415 Volts, 63 Amps, 16 kA, 50 Hz, AC, fixed thermal and fixed magnetic type including connecting up incoming/out going cables connection with suitable lugs and testing complete all as specified and as directed by Engr-in-charge.

Supply and fix for 3 pole power contactors 415 volt 50 Hz ML3 type 40 Amps AC3 rating with 2 NO +2NC Aux contacts, fixed in repairs, including taking out old existing unserviceable complete all as specified and as directed by Engr-in-charge.

Supply and fix for 3 pole power contactors 415 volt 50 Hz ML 4 type 70 Amps AC3 rating with 2 NO+2NC Aux contacts, fixed in repairs, including taking out old existing unserviceable complete all as specified and as directed by Engr-in-charge.

Supply and fix for digital multi function time switch with programmable fuction with battery backup and current carrying capacity 16 Amps with 1 changeover including taking out the unserviceable time switch complete all as specified and as directed by Engr-in-charge.

Supply and fix for street light panel box 32 Amps, 3 pole, 230 volts with contactor, digital time switch, 24 hours timer, MCB TPN etc., including taking out the unserviceable street light panel box complete all as specified and as directed by Engr-in-charge.

Supply and fix for LED flood light fitting 30 watts, 240 Volt, single phase, AC, outdoor type, aluminium pressure die-cast housing with IP66 protection with 4 KV in-built surge protection complete with driver, motherboard and LED including taking down unserviceable fitting, connecting and testing complete all as specified and as directed by Engr-in-charge. Make: Bajaj cat part No. BJFL 30W LED or techno commercially equivalent of Havells/Philips/Wipro

Supply and fix for LED flood light fitting 50 watts, 240 Volt, single phase, AC, outdoor type, aluminium pressure die-cast housing with IP66 protection with 4 KV in-built surge protection complete with driver, motherboard and LED including taking down unserviceable fitting, connecting and testing complete all as specified and as directed by Engr-in-charge. Make: Bajaj cat part No.BJFL 50W LED or techno commercially equivalent of Havells /Philips /Wipro

Supply and fix for LED flood light fitting 60 watts, 240 Volt, single phase, AC, outdoor type, aluminium pressure die-cast housing with IP66 protection with 4 KV in-built surge protection complete with driver, motherboard and LED including taking down unserviceable fitting, connecting and testing complete all as specified and as directed by Engr-in-charge. Make: Havells cat part No. JETAALBAFLOODLIGHT60W or techno commercially equivalent of Philips /Wipro /Bajaj

Supply and fix for LED flood light fitting 100 watts, 240 Volt, single phase, AC, outdoor type, with pressure die-cast housing, toughened glass with IP66 protection with 4 KV in-built and 10 KV external surge protection complete with driver, motherboard and LED including taking down unserviceable fitting, connecting and testing complete all as specified and as directed by Engr-in-charge. Make: Bajaj cat part No.PRAZE F 120L WH NB-A5 TG SD or techno commercially equivalent of Havells /Philips /Wipro

Supply and fix for LED flood light fitting 200 watts, 240 Volt, single phase, AC, outdoor type, with superior polycarbonate optics pressure die-cast housing, with IP66 protection with 4 Kv in-built and 10 Kv external surge protection complete with driver, motherboard and LED including taking down unserviceable fitting, connecting and testing complete all as specified and as directed by Engr-in-charge. Make: Bajaj cat part No. GLEAM F 220L WH SY PC SD V2 or techno commercially equivalent of Havells /Philips /Wipro

Supply and fix for LED street light fitting 35 watts, 240 Volt, single phase, AC, outdoor type with pressure die-cast housing with IP66 protection, high performance polycarbonate optics, 4 Kv in-built surge protection with top opening driver cover complete with driver, motherboard and LED including taking down unserviceable fitting, connecting and testing complete all as specified and as directed by Engr-in-charge. Make: Bajaj cat part No.ENXT P 42L WH PO PC SD MT or techno commercially equivalent of Havells/ Philips/ Wipro

Supply and fix for LED street light fitting 45 watts, 240 Volt, single phase, AC, outdoor type with pressure die-cast housing with IP66 protection, high performance polycarbonate optics, 4 Kv in-built surge protection with top opening driver cover complete with driver, motherboard and LED including taking down unserviceable fitting, connecting and testing complete all as specified and as directed by Engr-in-charge. Make: Bajaj cat part No.ENXT P 54L WH PO PC SD MT or techno commercially equivalent of Havells /Philips /Wipro

Supply and fix for LED street light fitting 90 watts, 240 Volt, single phase, AC, outdoor type with pressure die-cast housing, toughened glass with IP66 protection with 4 Kv in-built and 10 Kv external surge protection complete with driver, motherboard and LED including taking down unserviceable fitting, connecting and testing complete all as specified and as directed by Engr-in-charge. Make: Bajaj cat part No. ZELA P 108 L WH PO TG SD or techno commercially equivalent of Havells /Philips /Wipro

Supply and fix for LED street light fitting 100 watts, 240 Volt, single phase, AC, outdoor type with pressure die-cast housing, toughened glass with IP66 protection with 4 Kv in-built and 10 Kv external surge protection complete with driver, motherboard and LED including taking down unserviceable fitting, connecting and testing complete all as specified and as directed by Engr-in-charge. Make: Bajaj cat part No. ZELA P 120 L WH PO TG SD or techno commercially equivalent of Havells /Philips /Wipro

Supply and fix for LED post-top light fitting 25 watts made in die-cast aluminium bottom housing and spun aluminium top reflector with decorative clear acrylic diffuser and IP 65 protection with 25 watt LED bulb including taking down unserviceable fitting complete all as specified and as directed by Engr-in-charge. Make: Bajaj cat part No. BGCTN 25 W LED WH or techno commercially equivalent ofHavells/ Philips/ Wipro/ Crompton

Supply and fix for LED post-top light fitting 25 watts made in spherical shape polycarbonate opal and clear diffuser with IP 65/66 protection with 25 watt LED bulb including taking down unserviceable fitting complete all as specified and as directed by Engr-in-charge. Make: Bajaj cat part No. BLPTSP 25 W WW LED or techno commercially equivalent of Havells /Crompton/ Philips/ Wipro

Supply and fix for LED bulbs 23 Watts, BEE star rated energy efficient retrofit bulb, including taking down unserviceable lamp complete all as specified and as directed by Engr-in-charge.

Supply and fix for LED bulbs 10 watts, BEE star rated energy efficient retrofit bulb, including taking down unserviceable lamp complete all as specified and as directed by Engr-in-charge.

Excavation in trenches not exc 1.5m wide and not exc 1.5m deep and getting out in soft /loose soil complete all as specified and as directed by Engr-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cms thick in soft/ loose soil complete all as specified and as directed by Engr-in-charge.

Removing surplus soil to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed by Engr-in-charge.

Material and labour for sand cushioning to under ground cable with locally available dry sand for protection of cable 8cm thick before laying of cable and 15 cm thick after laying and stretching the cable below the bricks/PCC cover, punning of sand using suitable T&P as per site requirement complete all as specified and as directed by Engr-in-charge. Note: Punned thickness of sand i.e., 18 cm to be considered for measurement purpose.

Supplying and laying un-reinforced precast concrete cable cover class LV, Type 1, flat, size 250x150x40mm complete all as specified and as directed by Engr-in-charge.

Material and labour for plain cement concrete 1:4:8 type D-2 (Using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete in foundation of poles and stay assembly for bed concrete or as per site requirement complete all as specified and as directed by Engr-in-charge.

Taking out unserviceable cable any type/ size from trenches, pole, road, duct etc., including necessary joints, unserviceable fittings and pipes etc., complete all as specified and as directed by Engr-in-charge.

Supply and laying in trenches /laid in floor/ duct/ drawn through conduit XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100 V grade with aluminium conductor of cross sectional area 10 sqmm 2 core complete all as specified and as directed by Engr-in-charge.

Supply and laying in trenches /laid in floor/ duct/ drawn through conduit XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100 V grade with aluminium conductor of cross sectional area 10 sqmm 4 core complete all as specified and as directed by Engr-in-charge.

Supply and laying in trenches /laid in floor/ duct/ drawn through conduit XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable 1100 V grade with aluminium conductor of cross sectional area 16 sqmm 4 core complete all as specified and as directed by Engr-in-charge.

Taking up or down GI pipes medium grade alongwith pipe fittings from trenches floors, walls and roof etc., including cleaning for refixing or removal to store for the following sizes complete all as specified and as directed by Engr-in-charge.

100mm dia

80mm dia

50mm dia

40mm dia

25mm dia

20mm dia

15mm dia

Supply and fix in repair galvanised water tubes, medium grade including all fittings, laid in wall/ ceiling/floors of following sizes complete all as specified and as directed by Engr-in-charge.

40mm dia

25mm dia

20mm dia

15mm dia

Supply and fix in repair galvanised water tubes, light grade including all fittings, laid in trenches of following sizes complete all as specified and as directed by Engr-in-charge.

100mm dia

80mm dia

50mm dia

40mm dia

25mm dia

20mm dia

15mm dia

Supply and fix in repair gun-metal, globe or gate valves, heavy duty, with iron wheel head, screwed both ends (ISI marked) for the following sizes including all fittings nuts, bolts and washers etc., including taking down old unserviceable gate valve complete all as specified and as directed by Engr-in-charge.

100mm dia

80mm dia

50mm dia

40mm dia

25mm dia

20mm dia

15mm dia

Relaying only GI tubing of medium grade obtained from item No.53 here-in-before in trenches/walls/ ceiling including provision of new fittings complete in old/new location of following sizes complete all as specified and as directed by Engr-in-charge. Note: Excavation and earth work where required shall be measured and paid separately under relevant items of schedule.

100mm dia

80mm dia

50mm dia

40mm dia

25mm dia

20mm dia

15mm dia

Taking up cast iron water pipe (including all fittings), with spigot and socket ends and lead joints ncluding burning out joints and recovering lead complete all as specified and as directed by Engr-in-charge.

200mm dia

150mm dia

100mm dia

Supply and fix for CI fittings, heavy duty, such as bends, tapers, tees, collars, tail pieces, reducers, etc., laid and jointed with suitable push on joints complete upto 150mm dia complete all as specified and as directed by Engr-in-charge.

Supply and fix for CI fittings, heavy duty, such as bends, tapers, tees, collars, tail pieces, reducers, etc., laid and jointed with suitable push on joints complete upto 200mm to 300mm dia complete all as specified and as directed by Engr-in-charge.

Supply, laying and testing of ductile iron pipes, 200mm dia, class K-9, with spigot and socketed ends centrifugally cast (spun) with factory applied cement mortar lining inside the pipes and outside with zinc coating with suitable push on joint (rubber gasket D joint) complete all as specified and as directed by Engr-in-charge. Note: Excavation and earth work and DI specials where required shall be measured and paid separately under relevant item of schedule.

Supply, laying and testing of ductile iron pipes, 150mm dia, class K-9, with spigot and socketed ends centrifugally cast (spun) with factory applied cement mortar lining inside the pipes and outside with zinc coating with suitable push on joint (rubber gasket D joint) complete all as specified and as directed by Engr-in-charge. Note: Excavation and earth work and DI specials where required shall be measured and paid separately under relevant item of schedule.

Supply, laying and testing of ductile iron pipes, 100mm dia, class K-9, with spigot and socketed ends centrifugally cast (spun) with factory applied cement mortar lining inside the pipes and outside with zinc coating with suitable push on joint (rubber gasket D joint) complete all as specified and as directed by Engr-in-charge. Note: Excavation and earth work and DI specials where required shall be measured and paid separately under relevant item of schedule.

Material and labour for cement concrete type D- 2, 1:4:8 (Using 40mm graded stone aggregate) foundation filling mass concrete complete all as specified and as directed by Engr-in-charge.

Supply and fix for CI sluice valve of pressure class PN - 1.6 flanged, 200mm dia and drilled at both ends with ISI mark, having steel spindle and gun metal rings including wheel for operation and all jointing materials, bolts, nuts, washers, and necessary civil works such as demoltion, excavation, removing and returning filling etc., including dismantling and taking up unserviceable complete all as specified and as directed by Engr-in-charge.

Supply and fix for CI sluice valve of pressure class PN - 1.6 flanged, 150mm dia and drilled at both ends with ISI mark, having steel spindle and gun metal rings including wheel for operation and all jointing materials, bolts, nuts, washers, and necessary civil works such as demoltion, excavation, removing and returning filling etc., including dismantling and taking up unserviceable complete all as specified and as directed by Engr-in-charge.

Supply and fix for CI sluice valve of pressure class PN - 1.6 flanged, 100mm dia and drilled at both ends with ISI mark, having steel spindle and gun metal rings including wheel for operation and all jointing materials, bolts, nuts, washers, and necessary civil works such as demoltion, excavation, removing and returning filling etc., including dismantling and taking up unserviceable complete all as specified and as directed by Engr-in-charge.

Supply and fix for CI sluice valve of pressure class PN - 1.6 flanged, 80mm dia and drilled at both ends with ISI mark, having steel spindle and gun metal rings including wheel for operation and all jointing materials, bolts, nuts, washers, and necessary civil works such as demoltion, excavation, removing and returning filling etc., including dismantling and taking up unserviceable complete all as specified and as directed by Engr-in-charge.

Supply and fix for run lead joints for CI spigot and socket pipes 200mm dia complete all as specified and as directed by Engr-in-charge.

Supply and fix for run lead joints for CI spigot and socket pipes 150mm complete all as specified and as directed by Engr-in-charge.

Supply and fix for run lead joints for CI spigot and socket pipes 100mm complete all as specified and as directed by Engr-in-charge.

Supply and fix for run lead joints for CI spigot and socket pipes 80mm complete all as specified and as directed by Engr-in-charge.

Material and labour for stainless steel spindle and lock nuts suitable for 200mm size sluice valves, duly threaded fitted with necessary fabrication work to suit with existing size including provision of new gland packing and new strands and nuts, bolts, washer, fittings, as per site requirement items and taking out unserviceable spindle from the existing sluice valve and necessary civil works such as demoltion, excavation, removing and returning filling and including all necessary fittings complete all as specified and as directed by Engr-in-charge.

Material and labour for stainless steel spindle and lock nuts suitable for 150mm size sluice valves, duly threaded fitted with necessary fabrication work to suit with existing size including provision of new gland packing and new strands and nuts, bolts, washer, fittings, as per site requirement items and taking out unserviceable spindle from the existing sluice valve and necessary civil works such as demoltion, excavation, removing and returning filling and including all necessary fittings complete all as specified and as directed by Engr-in-charge.

Material and labour for stainless steel spindle and lock nuts suitable for 100mm size sluice valves, duly threaded fitted with necessary fabrication work to suit with existing size including provision of new gland packing and new strands and nuts, bolts, washer, fittings, as per site requirement items and taking out unserviceable spindle from the existing sluice valve and necessary civil works such as demoltion, excavation, removing and returning filling and including all necessary fittings complete all as specified and as directed by Engr-in-charge.

Material and labour for stainless steel spindle and lock nuts suitable for 80mm size sluice valves, duly threaded fitted with necessary fabrication work to suit with existing size including provision of new gland packing and new strands and nuts, bolts, washer, fittings, as per site requirement items and taking out unserviceable spindle from the existing sluice valve and necessary civil works such as demoltion, excavation, removing and returning filling and including all necessary fittings complete all as specified and as directed by Engr-in-charge.

Supply and fix for non return valve, heavy duty, ISI Marked, PN –1.0, both end flanged, suitable to fix with 150mm dia pipe line including nuts, bolts,washer, fittings as per site requirement items taking down existing unserviceable non return valve complete all as specified and as directed by Engr-in-charge.

Supply and fix for non return valve, heavy duty, ISI Marked, PN –1.0, both end flanged, suitable to fix with 80mm dia pipe line including nuts, bolts,washer, fittings as per site requirement items taking down existing unserviceable non return valve complete all as specified and as directed by Engr-in-charge.

Material and labour for attending break down maintenance of pumping line CI/DI/MS upto 300 mm dia from CJF pump house at Malleshwaram to HQTC pump house including necessary earth work to a depth not exc 2m wherever as required using JCB/ Manual according to the site condition and making good the distrubed surfaces/ road cuttings by refilling and removing surplus soil to a distance complete all as specified and as directed by Engr-in-charge. (a) The contractor shall supply any kind of tools and machinery required for the completion of job. (b) Execution of work/ attending break down may also occur in the civil area/ road crossing. Therefore the quoted rate is deemed to be inclusive of any precautionery measures while working on public places and strict adherence to the norm as applicables. (c) Any kind of CI/DI/MS pipe line upto 300mm, fittings like collar or bends etc., and run lead joint shall not be measured and paid separately.

Supply and fix for air release valve 150mm dia including all joint with rubber gasket and jonting materials, bolts, nuts, washers, fittings as per site requirement items including dismantling and removing unserviceable valve complete all as specified and as directed by Engr-in-charge.

Supply and fix for butterfly valve, heavy duty, ISI marked, both end flanged, suitable to fix with 150mm dia pipe line complete all as specified and as directed by Engr-in-charge.

Supply and fix for butterfly valve, heavy duty, ISI marked, both end flanged, suitable to fix with 100mm dia pipe line complete all as specified and as directed by Engr-in-charge.

Supply and fix for butterfly valve, heavy duty, ISI marked, both end flanged, suitable to fix with 80mm dia pipe line complete all as specified and as directed by Engr-in-charge.

Supply and fix for butterfly valve, heavy duty, ISI marked, both end flanged, suitable to fix with 65mm dia pipe line complete all as specified and as directed by Engr-in-charge.

Supply and fix for butterfly valve, heavy duty, ISI marked, both end flanged, suitable to fix with 50mm dia pipe line complete all as specified and as directed by Engr-in-charge.

Supply and fix for ball valve high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 15mm dia min weight 142 grams complete all as specified and as directed by Engr-in-charge.

Supply and fix for ball valve high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20mm dia min weight 142 grams complete all as specified and as directed by Engr-in-charge.

Supply and fix for ball valve high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 25mm dia min weight 142 grams complete all as specified and as directed by Engr-in-charge.

Suppy and laying of CPVC pipe SDR 11 of size 15mm outer dia with all fittings on walls/ ceiling /floors complete all as specified and as directed by Engr-in-charge.

Suppy and laying of CPVC pipe SDR 11 of size 20mm outer dia with all fittings on walls/ ceiling /floors complete all as specified and as directed by Engr-in-charge.

Suppy and laying of CPVC pipe SDR 11 of size 25mm outer dia with all fittings on walls/ ceiling /floors complete all as specified and as directed by Engr-in-charge.

Suppy and laying of CPVC pipe SDR 11 of size 32mm outer dia with all fittings on walls/ ceiling /floors complete all as specified and as directed by Engr-in-charge.

Suppy and laying of CPVC pipe SDR 11 of size 40mm outer dia with all fittings on walls/ ceiling /floors complete all as specified and as directed by Engr-in-charge.

Suppy and laying of CPVC pipe SDR 11 of size 50mm outer dia with all fittings on walls/ ceiling /floors complete all as specified and as directed by Engr-in-charge.

Supply and laying of CPVC pipe SDR 40 and plain schedule 80 fittings of size 80mm outer dia with all fittings on walls/ ceiling/ floors complete all as specified and as directed by Engr-in-charge.

Supply and fix for CPVC ball valve of size 80mm dia complete all as specified and as directed by Engr-in-charge.

Supply and fix for CPVC ball valve of size 50mm dia complete all as specified and as directed by Engr-in-charge.

Supply and fix for CPVC ball valve of size 40mm dia complete all as specified and as directed by Engr-in-charge.

Supply and fix for CPVC ball valve of size 25mm dia complete all as specified and as directed by Engr-in-charge.

Supply and fix for CPVC ball valve of size 20mm dia complete all as specified and as directed by Engr-in-charge.

Supply and fix for CPVC ball valve of size 15mm dia complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair bib tap standard of PTMT any colour high pressure screwed for iron pipe of size 15mm dia minimum weight 90 grams complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair bib tap standard of PTMT any colour high pressure screwed for iron pipe of size 20mm dia minimum weight 90 grams complete all as specified and as directed by Engr-in-charge.

Material and labour for cement concrete type B-1, 1:2:4 (Using 20mm graded stone aggregate) in mass concrete complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair PTMT ball valve, high pressure, with epoxy coated aluminium rod and high density plastic ball screwed for 15mm bore GI tubes complete all as specified and as directed by Engr-in-charge.

Supply and fix for water meter with flanged 200mm dia DI /CI /MS /GI pipe with necessary cutting, fitting such flages, nuts, bolts, washers, unions, tees elbow and etc., and including all fixtures and excavation as required, testing and commissioning complete all as specified and as directed by Engr-in-charge.

Supply and fix for water meter with flanged 150mm dia DI /CI /MS /GI pipe with necessary cutting, fitting such flages, nuts, bolts, washers, unions, tees elbow and etc., and including all fixtures and excavation as required, testing and commissioning complete all as specified and as directed by Engr-in-charge.

Supply and fix for water meter with flanged 100mm dia DI /CI /MS /GI pipe with necessary cutting, fitting such flages, nuts, bolts, washers, unions, tees elbow and etc., and including all fixtures and excavation as required, testing and commissioning complete all as specified and as directed by Engr-in-charge.

Supply and fix for water meter with flanged 80mm dia DI /CI /MS /GI pipe with necessary cutting, fitting such flages, nuts, bolts, washers, unions, tees elbow and etc., and including all fixtures and excavation as required, testing and commissioning complete all as specified and as directed by Engr-in-charge.

M/s STAR ELECTRICALS (BID ID -3314732)

M/S Jaiprakash Electrical and Engineering Works (BID ID -3312302)

M/s BHOOMI ELECTRICALS (BID ID -3315068)

SHREE ENTERPRISES (BID ID -3315406)

SREE VARU ELECTRICALS (BID ID -3314825)