SE/MEDC/Metro/Mdu/018/2025-26

Improvement works with allied Civil works

Suppling and fixing hand wash basin of 550 x 400 mm size with all accessories such as Cast iron Brackets ,32 mm dia CP wash coupling , rubber plug and chain ,32 mm dia 'B' class waste pipe ,15 mm dia GM wheel valve ,15 mm dia Nylon connection ,15 mm dia Brass Nipples, 15 mm CP pillar Tap etc., white with pedastal, cost of all materials , labour charges for fixing ,cost of furniture fittings as per the instruction of site engineers,including cost of all material, labour, lead, lift, etc., complete.

Supplying and fixing in position White / Colour Special Delux Model Glazed Cascade Type Parryware / Hindware / Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) with 10 litres capacity flushing tank with all internal dual flush fittings with normal seat cover Wall Fitting .

Supplying, fabricating and fixing in position of Aluminium anodised natural colour matt finish of single leaf fully panelled sliding door with 12mm thick bothside prelaminated partile board at the Shutter bottom rail:[email protected] kg/m,Top & Verticle 50x44.45x2.50mm @ 1.292 kg/m,Lock rail 50x44.45x2.50mm @ 1.292 g/m, Running channel section:[email protected] kg/m, and necessary accessories such as Alu.clips 17.15x17.27x1.50mm @ 0.176 kg, Alu handle 100x30mm @ 0.988 kg/mfull length of handles on both sides, lock, roller, including cost of materials, labour charges and power consumption charges required for fabrication including chipping, dismantling and waking hole to the required extent in RCC column, beam masonry with power drill wherever necessary and redoing the damaged portion to the original condition afterfixing etc. complete. All the Alu. sections are to be anodised.with matt finish under electically contolled condition in accordance with IS 1868/1962 for an average anodic film thickness of 15 microns etc.,

Supplying and fixing of with good Quality of 23 mm Gun Metal gate valve including cost of all materials, labour for fixing lead, lift, etc., complete.

Supplying and fixing of PVC Screw Down Tap Heavy Type 15mm dia, labour charges for fixing ,lead &lift etc, complete.

Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish fully prelaminated board of Aluminium partition. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m, Centre mullions: 63.50x38x3mm@ 1.55 kg/m, Alu. Clips: 17.27x17.15x1.50mm 0.175kg/mg/m for intermediate vertical and Horizontal mullion with required rubber beading etc., including necessary dismantling holes in RCC column, masonry wherever in necessary with power drills to the extent required and redo the damaged portion in good condition after fixing as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 and should be got approved by Departmental Engineer before use.

Painting two coats with ready mix plastic emulsion of first class quality paint and approved colour over a priming coat including through scrubbing clean removal of dirt etc, complete and including necessary plaster of Paris, petty, wherever required - 10sqm (INNER)

Providing Galvalume White sheet of size 0.47 mm for sunshades including J bolts & Hooks on roof, Frame, labour, cost of allmaterials, lead, lift etc., complete.

Replacing Plain glass 5mm thick for existing damaged glass in windows including the cost of all materials, labour, lead,lift, T&P etc complete.

Painting all exposed faces of M S. Angle(L Shape) frames with enamel paint over one coat of primary coat including cost of all materials, lead, lift etc complete.

Supply and fixing of 5' x 12' White ACP board with back cover with GI sheet and side wall Trimcap top Acrylic LED Red letters of 12" height (Including Ankle work for Board fixing) including cost of all materials, lead, lift, labour etc., complete

GST for bidders within Tamilnadu

GST for bidders outside Tamilnadu

Please Enable Macros to View BoQ information