Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.7 LAccepted-AOC 10 370 NEAR GEETA MANDIR GAS GODAM ROAD OBRA OBRA SONBHADRA UTTAR PRADESH 231219 INDIA | SONBHADRA | UTTAR PRADESH | 231219 | L1 | Accepted-AOC L1 | |
| 2 | L2₹18.5 L+₹1.8 L (10.7%)Rejected-AOC B 1 1769 PREM NAGAR KOTKAPURA | L2 | Rejected-AOC L2 | |
| 3 | L3₹19.0 L+₹2.3 L (13.9%)Rejected-AOC | L3 | Rejected-AOC L3 |
Tender Value
₹19.5 L
EMD Value
₹39,500
Closing Date
10 Jul 2023, 1:00 pmClosed
Sr. XEN, Civil Works Division, PSTCL, Jalandhar
Room No. 301, Shakti Sadan, Jalandhar
Construction of Civil Works for 66 KV Line Bay Fattanwala at 220 KV S/S Ghubaya.
2023_POWER_104473_1
CWJ/T-02/2023-24
Open Tender
Civil Works
Item Rate
225 days
at 220 KV S/S Ghubaya.
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹39,500
Yes
28 Mar 2024
23 Jun 2023
11 Jul 2023
23 Jun 2023
10 Jul 2023
23 Jun 2023
Amount
Earth work in excavation in foundations, trenches etc. In all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches , stacking the excavated soil clear from the edge of excavation and subsequent filling around masonary in 15 cm layers with compaction including diposal of all surplus soil as directed within a lead of 30 metres.
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
Centering and shuttering for columns (Square or rectangular or poly gonal in plain)
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
Cement Concrete 1:6:12 with stone aggregate 40mm gauge(mixing by mechanical means using concrete mixer volumetric type)
Cement Concrete 1:5:10 with stone aggregate 40mm gauge(mixing by mechanical means using concrete mixer volumetric type)
Cement Concrete 1:2:4 with stone ballast or shingle (mixing by mechanical means using concrete mixer volumetric type)
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in foundation and plinth .
Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in superstructure .
Filling of brick bats in well shaft
First class burnt work laid in cement sand mortar 1:7 in foundation and plinth
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth .
First class burnt brick work laid in cement sand mortar 1:5 in first storey up to 4 metres above plinth level.
115mm thick brick wall laid in cement mortar 1:4 without reinforcement in foundation and plinth .
Extra labour for brickwork
Conglomerate floor 25mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material
Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material
12.5 mm thick cement plaster 1:3
12.5 mm thick cement plaster 1:4
12.5 mm thick cement plaster 1:5
20 mm thick cement plaster 1:4 in two coat work
Mild steel requirement for RCC work where not including the complete rate of RCC including bending, binding and placing in position complete in all respects.upto 20mm dia bars(Labour Rate).
Cold twisted detormed (Ribbed/ ToR S teel Bar) Bars (Fe 500 grade as per IS 1786-1985) , for R.C.C works, where not including in the complete rate of RCC including bending and biding placing in position complete.
Loosening, leveling and compacting original ground up to a level of 500mm below road crust, mixed with water at OMC, levelled, graded and compacted in layers by rolling so as to achieve minimum dry density as given in Table 300-2 for sub grade construction as per technical clause 305 of MORT&H specifications
Providing and laying of Brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per Punjab PWD specifications
Providing and filling joint sealing compound with coarse sand and 6 percent bitumen by weight complete as per drawings and technical clause 2605 of MORT&H specifications
Boring for Hand Pump in clay fitting stainer and pipe above 75mm dia bore but not exceeding 100mm: From 0 to 15m
Boring for Hand Pump in clay fitting stainer and pipe above 75mm dia bore but not exceeding 100mm: Exceeding 15m but upto 30m
Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.
110mm o/d pipe of 10 Kgf. / sqcm
Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design.
Providing and fixing in position gratings 150mm x 150mm for gully trap.-
H.C.I. grating including painting with black bitumastic superior paint of approved manufacture three coats.
P&F M.S Cable Racks made OF M.S Angle Iron for various size of 50x50x6 mm complete as per dwg
Providing and fixing MS Angle iron nosing made out of 50x50x3 angle and flat 25x3 mm 600mm c/c wt 2.56 kg/mtr. complete in all respects
Supply , Hoisting & plaicng of ferro cement trench covers,frames of size given below made of MS Flat 50x3 mm with 6mm dia bars at 4.5 "and 9"welded to flat with lifting hook as per Drg No CW/DS2537 R5 and CS/DS2420 R3 Complete - T3 - type (2'-2"x2'-2")
Supplying hoisting of Ferro cement trench cover frame of size given below made of MS flat 50X3mm with 6mm dia bars with 9/2" and 9"C/C welded to flat with lifting hooks as per drg. no C/W DS-2537 R5 and CW/DS 2420 R3 complete Trench Cover T-4 Type ( 2’-6” x 1’-9”)
Supplying and spreading of crushed stone3/4" nominal size(20mm) in 3" (75mm) thick layer over PCC flooring in the switch yard area marked or as per directions of Engineer-in-Charge.
PCC Flooring 1:5:10 complete
Cement Slurry of cement to sand ratio 1:6 with cement content not less than 150kg/100sqm
Fixing of Template along with foundation bolts as per Drg.
Extra Carriage of materials & diff. of rates of material- Cement
Extra Carriage of materials & diff. of rates of material- Steel
Extra Carriage of materials & diff. of rates of material- Crushed bajri 13.2mm
Extra Carriage of materials & diff. of rates of material- Fine sand
Extra Carriage of materials & diff. of rates of material- Bricks
Extra Carriage of materials & diff. of rates of material- Crushed bajri 11.2mm
Extra Carriage of materials & diff. of rates of material- Coarse Sand
Extra Carriage of materials & diff. of rates of material- Stone metal 40mm
SURJIT SINGH AND SONS
THE MOHAN KE UTTAR COOP L AND C SOCIETY LTD
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .