EPAIR AND MAINTENANCE WORK OF WOODEN FURNITURE UNDER GE (N) PATIALA

TABLE WRITING FD 275 : M&L for carrying out repair/replacement of following parts of Table writing as per drawing after removing the old unserviceable parts complete all as specified and shown on drg

Top of table using 18 mm thick prelaminated particle board Make (Archid/Novapan/ECCO) ISI marked, including 6 mm thick teak beading all around.

Legs using teak wood(MP Teak)

Rails using teak wood(MP Teak)

Front of drawer and shutter of cabinet using 18 mm thick prelaminated particle board (One side teak finish)

Shutter of cabinet using 18 mm prelaminated particle baord (One side teak finish and other side white balancing laminated))

Sides bottom and shelf of cabinet using 12 mm thick particle board.

Bottom of drawer and side of cabinet using 6 mm thick commericlal ply wood make kit/green/national

Supply and fixing knobs to drawers

Applying two coat of french polish (ready made) to article after necessary prepartion of surfaces

Table 3x2 without drawer FD 284 :- M&L for carrying out repair/replacement of following parts of Table 3x2 without drawer as per drawing after removing the old unserviceable parts complete all as specified and shown on drg

Top using 18 mm thick prelaminated particle board Make (Archid/Novapan/Ecco) ISI marked exterior grade including 6 mm thick teak beading all aroung.

Leg using teak wood(MP Teak)

long side rails using teak wood(MP Teak)

Short side rails using Teak wood (MP Teak)

Stiffiners using Teak wood (MP teak)

Applying two coat of french polish (ready made) to article after necessary prepartion of surfaces

BED PLY WOOD TOP (FD- 246):- M & L for carrying out repair/replacement of following parts of Bed Ply Top as per drawing after dismantling the old parts complete all as specified and directed.

S & F Long rail made out of first class hard wood (Teak).

S&F short rails made out of first class hard wood (Teak) as per drg

Head Board complete with legs as per sample

Foot Board complete with legs as per sample.

S & F Ply wood top made out of 12mm thick commercial ply wood of ISI marked .

Teak Face Ply of Size 04mm Of Head Wing Board

Teak Face Ply of Size 04mm Of foot Wing Board

Stiffner made out of Teak wood as per sample

Cleaning and preparing old polished surface of Bed ply top and apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge.

TEAPOY (FD-382 , FD-278):- M & L for carrying out repair/replacement following parts of teapoy , complete all as specified and shown on drgs after removing the old broken part.

S & F top of 18/19 mm thick prelaminated particle board ISI Marked Make( Action / tesa /arched /novapan) exterior grade and 6 mm thick teak edging all around.

S & F long rails of teak wood all as per drawing..

S & F legs of teak wood all as per drawing..

S & F stiffners of teak wood all as per drawing..

Cleaning and preparing old polished surface of teapoy and apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge.

TABLE CENTRE/TABLE CENTRE TWO TIER ( FD-274) M & L for carrying out repair/replacement following parts to table centre, complete all as specified and shown on drgs after removing the old broken part.

Top 900x450mm made out of 18mm thick prelaminated particle board exterior grade, Make : action tesa/arched/novapan ISI marked fixed with mild steel screws as per size and shape including 4mm thick teak wood beading all around.

S & F Legs made out of first class hard wood (Teak)

S & F Long rails made out of first class hard wood (Teak)

S & F Short rails made out of first class hard wood (Teak)

S & F Stiffners of table center made out of first class hard wood (Teak)

Cleaning and preparing old polished surface of table centre and apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge.

S&F of ply wood of 6mm thick commercial for 2 tire table

TABLE DINING FOR 6 PERSONS (FD-273) M & L for carrying out repair/replacement following parts to table dining for 6 persons, complete all as specified and shown on drgs after removing the old broken part.

Top 1500x900mm made out of 18mm thick prelaminated particle board exterior grade, Make : action tesa/arched/novapan ISI marked fixed with mild steel screws as per size and shape including 4mm thick teak wood beading all around.

S & F Legs square shape made out of first class hard wood (Teak).

S & F Long rails made out of first class hard wood (Teak)

S & F Short rails made out of first class hard wood (Teak)

Triangular wooden bracket 100X100X20mm thick

Cleaning and preparing old polished surface of table dinning 8 pers and apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge.

SOFA SET THREE SEATER/SINGLE SEATER WITH DETACHABLE CUSHION (FD-281/FD-373) M & L for carrying out repair/replacement of following parts of Sofa set three seater /single seater with detachable cushion as per drawing after dismantling the old parts complete all as specified

S & F of long rails of seat for three seater sofa of size 1590mmx100mmx35mm of 1st class hardwood (teak) duly plained and smoothed with sand paper.

do but Side rail of back size 575mm x 100mm x 35mm.

All as per Srl Item no.10 above but back long rail of back of size 1590mm x 70mm x 35mm.

do but Side rail of sea but single seat size 575mm x 100mm x 35mm.

All as per Srl Item above but back of single seat long rail of back of size 575 mm x100mmx35mm.

S & F in replacement of arms for Single / Three seater sofa of size 35mm x 70mm (cross section) of 1st class hard wood (MP Teak) complete all as specified and shown on drgs after removing the old broken arms.

do but batten of size 50mm x 20mm.

M & L for applying two coat of french polish after preparation of surface complete to sofa 3 seater

M & L for applying two coat of french polish after preparation of surface complete to sofa single chair.

S & F sofa foam cushion 40 density, 100mm thick of standard size covered with tapestry cloth as approved by GE. MAKE : SLEEP WELL/COOL FOAM/FEATHER FOAM. Foam Cushion cover only duly stiched and one side Jip size 530 x 560 mm as per sample approved by engineering in charge.

Chair writing/CBA (FD-280&250) M & L for carrying out repair/replacement following parts to Chair writing/CBA, made out of 1st class hard wood (Teak) complete all as specified and shown on drgs after removing the old broken part.

S & F Front Legs.

S & F Rear Legs.

S & F Front Rails.

S & F Side Rails.

S & F Back Rails.

S & F Arms.

S & F Stiffners.

M & L for applying two coats of french polish to Chair writing/CBA after preparation of surface complete all as specified.

Chair Dinning (FD-279) S & F in replacement following parts to Chair Dinning/CBB, made out of 1st class hard wood (Teak) complete all as specified and shown on drgs after removing the old broken part. M & L for carrying out repair/replacement of following parts of Chair Dining as per drawing after dismantling the old parts complete all as specified

S & F Front legs.

S & F Rear Legs.

S & F Front Rails.

S & FSide Rails.

S & F Back Rails.

S & F Stiffners.

M & L for applying two coats of french polish to Chair Dinning/CBB after preparation of surface complete all as specified.

Chair Easy (FD-229) S & F in replacement following parts to Chair easy/CBB, made out of 1st class hard wood (Teak) duly french polished complete all as specified and shown on drgs after removing the old broken part. M & L for carrying out repair/replacement of following parts of Chair Dining as per drawing after dismantling the old parts complete all as specified

S & F Front legs

S & F Rear legs

S & F Front Rails of seat.

S & F Rear Rails of seat.

S & F Side Rails of seat.

S & F Back Rails of Back.

S & F Side Rails of Back.

S & F Arms of Chair easy

M & L for applying two coats of french polish to Chair Easy after preparation of surface complete all as specified.

Recanning of Chairs of all type M&L for removing old broken cane and recanning of Chairs with plastic cane (oval shape) 2mm wide and border with 3mm/4mm wide cane complete as per Godrej pattern using Make : SHAH/RPEMIER brand cane (removing of old broken cane shall be done at BSO yard) as per specified in drg.

Recanning of chair writing (FD-280&1107)

Recanning of chair dinnig (FD-279)

Recanning of chair easy(FD-229&1108)

TABLE DINING120X90 CM (FD-284) M & L for carrying out repair/replacement following parts to table dining complete all as specified and shown on drgs after removing the old broken part.

S&F Top of the table with 18/19mm thick prelaminated particle board , Make :( action tesa/arched/novapan) ISI marked exterior grade as in top of the table including 6mm thick teak wood beading all around.

S & F Legs of teak wood .

S & F Long rails of teak wood.

S & F Short rails of teak wood.

S&F Triangular wooden bracket as per Drg.

Cleaning and preparing old polished surface of table dinning and apply two coats of french polishing to give a glossy finish complete all as specified and as directed by Engineer-in-Charge.

PEG TABLE M&L for carry out repair/replacement of following parts of peg table as per drawing after dismantling the old parts complete all as specified:-

S&F Top with 18/19mm thick prelaminated particle board , Make :( action tesa/arched/novapan) ISI marked exterior grade as in top of the table including 6mm thick teak wood beading all around.

S & F Legs of teak wood .

S & F Long rails of teak wood.

S & F Short rails of teak wood.

Applying two coat of french polish to complete peg table after necessary preparation of surfaces.

Please Enable Macros to View BoQ information