Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.9 LAccepted-AOC SHIV BHAWAN MAGADH COLONY ROAD NO 03 SHERGHATI ROAD GAYA BIHAR PIN 823001 | GAYA | GAYA | BIHAR | 823001 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹31.1 L+₹92,521.25 (3.06%)Rejected-Finance HOUSE NO 413 MAGADH COLONY SHERGHATI ROAD GAYA BIHAR PIN 823001 | GAYA | BIHAR | 823001 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹31.9 L+₹1.7 L (5.69%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹32.4 L+₹2.2 L (7.41%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹32.5 L+₹2.3 L (7.65%)Rejected-Finance SADAR BAZAR DANAPUR CANTT PATNA 801503 | PATNA | PATNA | BIHAR | 801503 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
29 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Dipatoli
GARRISON ENGINEER MILITARY ENGINEER SERVICES DIPATOLI CANTT P.O. HOTWAR RANCHI - 834012
REPAIRS TO ROOF, CEILING, SUNKEN AND MISC WORK AT OTM/MD ACCN BLDGS OF HQ INF DIV CAMP, IDSR, MAHAR, CHILDREN SCHOOL AND ALLIED AREA IN AGE B/R-I UNDER GE DIPATOLI
2022_MES_539078_1
8000/1819/E8
Open Tender
Civil Works
Item Rate
270 days
Dipatoli
Class D, Category
a(i)
8 documents required · 8 mandatory
₹500
Yes
GE Dipatoli
₹60,000
Yes
17 Sept 2022
9 Aug 2022
31 Aug 2022
9 Aug 2022
29 Aug 2022
23 Aug 2022
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off premises etc complete all as specified and directed
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness below or above the ground floor etc complete all as specified and directed
M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in sunken portion and making adequate slope toward spout pipe complete all as specified and directed.
M&L for 75 mm thick cement concrete(1:3:6) type C2, using 40 mm stone aggregate finished even & smooth without using extra cement as in plinth protection etc, complete all as specified and directed.
M&L for rendering 15 mm thick on concrete or brick surface in CM (1:3) mixed with WPC as per manufacturer instructions and finishes of sunken surfaces even and smooth with out using extra cement. Note : WPC will be measured and paid separtely
M&L for applying two coats evenly a tack coat of hot air blown bitumen of grade 85/25 @ 1.50 Kg per sqm per coat including cleaning of surface over polythene film complete all as specified and as directed
M&L for polythene film black 200 micron thick laid in floor, vertical surface etc complete all as specified and directed.
M&L Cement concrete, Type E2 (1:5:10) (40mm graded aggreated in foundations, filling and mass concrete in sunken portion of IWC and bathroom, complete all as specified and directed.
S&F in repair vitreous china squatting pan, Orissa pattern size 580 x 440 mm white, with integral foot rest including connection to trap, and to flush pipe, anti-syphonage etc, complete all as specified and directed.
Supply and fix vitreous china wash down water closet pan (pedestal pattern) with "P" or 'S' trap, including fixing bolts, connection to flushing pipe and outgoing sewage pipe fixed in repair complete all as specified and directed
Supply and fix in repair Vitreous China urinal full stall type, white (back or corner all type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe waste pipe 32mm bore dia of PTMTetc complete all as specified and directed
Supply and fix in repair wash basins, Vitreous China 580 x 450mm including cutting for and pinning in ends of brackets or erecting stand, waste coupling/fitting 32mm bore dia of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60gms) etcincluding 15mm pillar tap cast copper alloy fency type complete all as specified and directed
S&F kitchen sinks with drainage boards made of stainless steel 1mm thick with plugs, washers & wastes, including in cement mortar to dwarf wall including fixing cantilever brackets and connecting unioun to pipes over all size 915mm x 460mm size 410mm x 330mm x 110mm, complete all as specified and directed.
S&F in repair 10 ltr capacity PVC Valveless, syphonic action with dual flushing cistern type low level, white including flush pipe 32mm bore polythylene complet all as specified and directed with fancy design
S&F in repair PVC Connections 15mm size with PTMT nuts of length 450mm including washer, complete all as specified and directed.
S&F Non skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screedbed in CM (1:6) complete all as specified and direccted
M&L for coloured glazed ceramic tiles in vertical surface 350mm x 250mm x 7mm or 450 x 350x7mm thick and including10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and directed.
M & L Coloured non skid ceramic tile 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15mm thick screed bed in CM (1:6) complete all as specified and directed.
S&F Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces as in skirtings, dado and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plastering in CM (1:4) complete all as specified and direccted
S&F Vtrified Ceramic tiles light shade 10 mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thk screed bed in CM (1:6) complete all as specified and direccted
S&F Vtrified Ceramic tiles light shade 10 mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm on vertical surface such as skriting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thk plastering, complete all as specified and directed.
S&F in repair PVC(SWR) floor trap 75mm dia plain with grating incl jointing with solvent cement complete all as specified and directed
Taking up or down steel tubing and connections including for refixing or removal 15mm bore, complete all as specified and directed
Taking up or down steel tubing and connections including for refixing or removal 20mm bore, complete all as specified and directed
S&F steel tubing and connection in new or old position to walls, ceiling, floors etc complete all as specified and directed and 15 mm bore medium grade, with all fittings, fitted to wall and ceiling or laid in floor complete all as specified and directed
S&F steel tubing and connection in new or old position to walls, ceiling, floors etc, 20 mm bore medium grade, with all fittings, fitted to wall and ceiling or laid in floor complete all as specified and directed
S&F in repair Bib taps,15 mm bore cast copper alloy chromium plated fancy (half turn) type with crutch or butterfly handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed
S&F in repair brass chromium plated shower rose 125mm size complete all as specified and directed
S & F in repair Tubular towel rail, 20mm dia, D type, 60 cm long between flanges CP brass, complete all as specified and directed
S&Fix in repairs decorative curtain rails made out of 25mm dia (outer dia) MS pipe having wall thickness 0.63mm, PVC coated of any colours and pattern as approved by the Engr-in-Charge, overall dia 28 to 29mm, including provn of two nos brackets on each ends and provn of two nos of globe on each ends for each windows/door for fixing complete all as specified and directed with fency design
S&F in repair angle valve/ stop valve cast copper alloy fancy type chromium plated with long shank and cup (concealed type), screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed of size 15mm bore with fency design (half tum type) complete all as specified and directed.
S&F in repair two way angle valve cast copper alloy fancy type chromium plated with long shank and cup (concealed type), screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed of size 15mm bore with fency design (half turn type) complete all as specified and directed
S&F in repair Brass CP wall mixer tap 15mm dia bore (three in one) for making "Hot" or "COLD" water, screwed down high pressure, fixed with iron pipe with fancy design complete all as specified and directed
S&F in repair Brass CP basin mixer pillar tap 15mm dia bore for making "Hot" or "COLD" water with lettered HOT and COLD screwed down high pressure, fixed with iron pipe with fency design complete all as specified and directed
S&F corner glass shelf 300mm (with fancy ABS brackets) of size (300x300) mm completed all as specified and directed
S&F in repairs utensil rack/ kitchen rack stainless steel size 850mm x 800mm x 270mm approved mark completed all as specified and directed with fency design
S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.
S&F in repair Gun-metal, globe or gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.
S&F in repair 15mm dia stop valve fancy type (half turn) chromium plated concealed type, screwed down high pressur, with crutch or butterfly handle, screwed both hands for iron pipe or for unions, complete all as specified and directed.
Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc laid in CM, complete all as specified and directed.
M &L for machine cut cuddapah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and polishing, including 15mm th screed bed (1:6) complete all as specified and directed.
M&L for 20mm thick table rubbed and polished granite (of any type) work as in steps, jambs, pillars, windows cills, cooking platform etc jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including 15mm thick screed bed in CM (1:6) complete all as specified and directed
M & L for rounding to edges of granite or stone slabs one edge, such as in cooking platform and other similar situations, complete all as specified and directed.
Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed
M&L for rendering 15 mm thick on brick surface in CM (1:4) mixed with WPC as per manufacturer instructions and finishes surfaces even and smooth with out using extra cement, complete all as specified and directed. Note : WPC will be measured and paid separtely
M&L 15mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed.
M&L 5mm thick in CM (1:3) on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed
M&L for Preparing surfaces plastered on new surface of wall and applying two coats of cement base paint complete all as specified and directed
M&L for complete removal of existing treatment or new plastered surfaces on wall of any height of bldigs by brooming down with wire brushing, stoping and applying two coats of exterior weather coat/ plastic emulsion under one coat of primer by mechanical applicator, complete all as specified and directed (Weather coat shall be of Asian paint, Apex, ultima or equivalent as approved by GE)
M&L for applying one coat of weather proof exterior emulsion paint(1st quality)/plastic emulsion paint on walls, chajjas, facia by mechanical applicator of any height of bldigs etc, including preparing of old surfaces with brooming down or steel wire brushing scrapping down smoke soot moulds moss and efflorescent salts and trading oil and greasy spots complete all as specified and as directed. (Weather coat shall be of Asian paint, Apex, ultima or equivalent as approved by GE)
M&L for applying two coats of oil bound distemper over one coat of chalk whiting on plastered surfaces, preparatory to distempering including preparation of newly plastered surface complete all as specified and directed.
M&L for preparation of new surfaces and applying Three coats of white wash on wall surfaces including cornices etc complete all as specified and directed
M&L for preparation of new surfaces and applying three coats of white wash on ceiling including cornices etc complete all as specified and directed
Complete removal of existing treatment and preparing the surface of walls and apply two coats of cement base paint complete all as specified and directed
M&L for preparation of old surfaces and applying one coat of white wash on wall surfaces including cornices etc complete all as specified and directed
All as per Ser item No 55 above but on ceiling
Dismantling asbestos cement (corrugated/semi corrugated etc) sheet including ridge in roof covering of any thickness complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.
Supply and fixing for pre-painted galvalume aluminium zinc coating GI based corrosion protection and heat reflective corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrosion protection and heat reflective plain sheet steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Supply and fix rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to quality 'A', Fe-290 (Gde E- 165) complete all as specified and directed.
Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description, over 10cm in width or girth complete all as specified and directed.
Material and labour for applying one coats of synthetic enamel paint on old steel surfaces over 10cm width or girth width or girth preparation of surfaces complete all as specified and directed.
Complete removal of all existing roof treatment from RCC roof including old hussion felt and preparation of surface with bire brush and cleaning with water complete all as specified and directed
Brushing net cement slurry @ 3kg/sqm on roof slab
M&L for preparation of concrete roof surfaces and applying 10mm thick plaster in CM (1:4) and finished the surface even and smooth without using extra cement complete all as specified and directed
M&L for applying a coat of bitumen primer @ 0.3L/sqm on roof surfaces, complete all as specified and directed.
M&L for applying 3mm thk APP modified polymeric membrane over the bitumen coat surface, weight not less than 3Kg/Sqm and over lap 100mm and sealed by torch application as per manufacture insteructions compele all as specified and directed
M&L for applying two coats aluminium paint over bituminous surface of membrane, complete all as specified and directed.
M&L 22 mm thick machine pressed cement concrete tiles with grey cement without pigment of size 250 mm x 250 mm laid in neat cement slurry over and including 15 mm thick bed screed in CM (1:4) mixed with chemical compound PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD 200 milli - litre mixed with 50 Kg of cement or STP No 1 (LIQUID) of STP LTD in proportion 200 milli litre per 50 Kg cement, as per manufactures instructions and tiles properly laid with 3 mm wide joints filled with FEVIMATE TG of DR FIXIT of PIDILITE INDUSTRIES LTD or TILE GLUE of STP LTD as per manufactures instructions complete all as specified and directed
Taking down eaves gutters and rain water pipes (any size or patterns) including all fittings, heads, shoes, bends, swan-necks etc complete all as specified and directed
S&F PVC (SWR) pipe 110 mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp complete all as specified and directed
S&F PVC (SWR) pipe 75mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp complete all as specified and directed
S&F PVC (SWR) bends any radius 110 mm dia complete all as specified and directed
S&F PVC (SWR) bends any radius 75 mm dia complete all as specified and directed
M&L PVC (SWR) junction, single T of equal or unequal 110mm dia, complete all as specified and directed.
M&L PVC (SWR) junction doule (double T) Tee of equal or anequal 110mm dia, complete all as specified and directed.
M&L PVC (SWR) junction, single T of equal or unequal 75mm dia, complete all as specified and directed.
M&L PVC (SWR) branch piece, double (double Y) equal or anequal 110mm dia, complete all as specified and directed.
M&L PVC (SWR) branch piece, single (single Y) equal or anequal 110mm dia, complete all as specified and directed.
M&L PVC (SWR) vent cowl 110mm dia, complete all as specified and directed.
M&L PVC (SWR) vent cowl 75mm dia, complete all as specified and directed.
Disconnecting exisiting tanks setting aside for repairng cleaning and removing all scale and dirt etc from mounths of circulating pipes etc and hoisting reconnecting and refixing in existing position. Capacity of tanks exc 500 ltrs and not exc 1000 ltrs complete all as specified and directed
Disconnecting exisiting tanks setting aside for repairng cleaning and removing al scale and dirt etc from mounths of circulating pipes etc and hoisting reconnecting and refixing in existing position. Capacity of tanks exc 250 ltrs and not exc 500 ltrs complete all as specified and directed
Taking down chowkhat with shutter without taking off shutter from chowkhat not exceeding 1.5 each complete all as specified and directed
Taking down shutter of any description exc 1 Sqm but n'exc 2 Sqm each complete all as specified and directed
Material and labour for refixing existing shutter of any descriptions exceeding 1 Sq.m and not exceeding 2 sq.m each in the same opening complete all as specified and directed.
S & F PVC door chowkhats of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supply & fixing in opening as per specification & drawing, complete all as specified and directed.
Supplied and fixed factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined to gether with solvent cement, suppling & fixing in the frame as per specification & drawing with fancy type complete all as specified and directed.
S&F 2nd class hardwood glazed and skelton shutters, 35mm thick, open rebated and prepared to receive glass, gauze etc with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mtred beads for securing glass etc, sizes of members of shutters complete all as specified and directed in SSR Part-I, Section 8, Clause 8.24 (a)
S&F 35mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F GI mild steel wire cloth 0.56 nominal dia wire and average width aperture 1.18mm and fixed with pinned tack or galvanized staples complete all as specified and directed
S & F 200mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed
S & F 150mm long Aluminium handle cast type anodised complete all as specified and directed
Supply and fix 100mm long butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin anodized and fixed, type B-21 complete all as specified and directed.
Supply and fix 100mm long butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin anodized and fixed, type B-21 complete all as specified and directed.
S & F in repair 100mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed
S & F in repair 150mm long Aluminium handle cast type anodised complete all as specified and directed
S & F 100mm long Aluminium handle cast type anodised complete all as specified and directed
S&F mild steel sliding door bolts 300mm long complete all as specified and directed
M&L for repair and rendering 10mm thick in cm (1 :3) on chajjas, facia, roof projection, column sides, beam bottom and sides including throating after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete (1:2:4) Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs complete all as specified and directed
S&F in repairs pillar tap cast 15mm bore copper alloy fency type with capstan head chromium plated screwed down high pressure with or without lettered head "HOT" or "COLD" with long screwed shank and flynuts, screwed for iron pipe (Half turn type), complete all as specified and directed.
Supply only liquid water proofing compound, complete all as specified and directed.
M/S CHAUHAN CONSTRUCTION
SHARDA CONSTRUCTIONS
M/s Deepak kumar sinha
RC GUPTA AND SONS
BUILDCON ENTERPRISES
M/s Dwarika Nath Singh
M/S AMOD KUMAR PANDEY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .