Construction of sluice gate at Pandunath Mandir area to check back flow of river Brahmaputra

Amount

Excavation for structure (Earth work in excavation of foundation structure as per drawing and technical specification, including setting out, construction of shoring and bracing, removing of stumps and other deleterious matter dressing of sides bottom, back filling the excavated earth to the extent required and utilizing there manning earth locally for road work) Ordinary soil Manual means (Depth upto 3m without de-watering)

Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom,backfilling the excavated earth to the extent required and utilising theremaining earth locally for road work.) Marchy Soil Manual means (Depth upto 3 m) (without de-watering)

Carriage of excavation muddy/ slushy soil/ garbage by truck of 10 MT capacity & depositing the same in suitable dumping ground within an average lead of 5.00 km including cost of P.O.L. and loading/ unloading charges etc. complete as directed

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical specification Granular material

Sand filling in foundation trenches as per drawing and technical specification.

Plain / retain forced cement concrete, in substructure complete as per drawing & technical specification & steel shuttering form works without plasticizer PCC grade M-15

Plain / retain forced cement concrete, in substructure complete as per drawing & technical specification & steel shuttering form works without plasticizer PCC grade M-20

Supplying , fitting and placing TMT bar reinforced in sub-structure complete as per drawing a technical specification, with TATA make TMT rebar

Supplying, fitting & fixing in position reinforcement bar conforming to relevant IS code, for reinforced cement concrete works in piles, including straightening, cleaning cutting & bending to proper shapes & length as per specification and drawing. The rings, should be welded with vertical reinforcement as per specified IS code of practice. (inclusive of lap length, hook, chair, bend, anchor etc.) TMT bar made of primary producer (from primary producer)

Providing cast in-situ manually driven reinforced cement concrete piles of using required grade of cement concrete of required bore-diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings. Reinforcement to be measured and paid seperately as per item no. 21.4.1 , UNIFORM PILE Pile Dia 400 mm ii) Above 10 M

20mm thick cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises,internal rounded angles,chamferss and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. (A) on rough side (backing coat 15mm and finishing coat 5mm thick) a) in cement mortar 1:3

Collection & supply of approved quality hard blasted of size 23cm to 30 cm (man size) & weighting not less than 40 kg. free from all dust and dirt and other foreign impurities including loading and unloading and stacking in regular measurable stack of approximately 1.0m height including payment of forest royalty, etc. complete as directed.

Labour charge of dumping of builder in cage made of wire netting sheets of 8G wire mesh of size 2.57m x 1.66m with two sheets made in cage (supplied by the deptt. free of cost within 150mm) making the cage by lying the project ends. Filling bounder inside the cage and local carriage of boulder from a distance of 150.00m etc. complete (without boat)

Supply of Galvd. Wire netting sheets made of 8G wire of 152 mm (6”) square mesh in sheets of overall size 2.5m x 1.66m (8’-0” x 6’6”) with longitudinal wire at 152mm (6”) center and transverse wire at each wire of all size beyond the net size of 2.42m x 1.5m having knots of 12G wire at every joint of each sheets should not be less than 6.3 kg. (including of GST & L.S)

Dewatering by 5 H.P. water pump including supply of necessary fuel, engine oil and pump operator etc complete.

Construction of whole bamboo single pallasiding with mature bhaluka bamboo stack of 75mm to 100mm dia, 15cm. clear apart driven 1.5m to 1.80m above ground level & 1.00m to 1.20m below ground level with Bhaluka bamboo inclined struts fixed at 1.5m apart tied with three rows of horizontal jati bamboo kamies with G.I. wire of 16G/18G etc. complete as directed.

serviceable empty cement bags

Labour charge laying pitching earth filed cement bags including excavation & borrowing earth, breaking clods filling in bafgs & supplying and stitching the mouth with in jute sutli etc. complete as directed (cement bags will be supplied by the deptt. free of cost) for borrowing earth from a distance beyond 30m and upto 60m.

Local carriage of boulder, metal, gravel etc. from the Approachable site beyond 150m and upto 3km from the work site including loading from stqack and unloading at work site with 10 Ton capacity truck , supplying P.O.:. etc. complete as directed.

Construction of temporary shed with 300mm high plinth and floor, Blaluka Bamboo post driving at least 750mm underground height above plinth 2400mm, wattle wall mud plastered and while wash two coats, 100mm thick thatched roof, double mat doors and windows etc. complete as directed as specified with whole jati bamboo rua frame (to be used as store for keeping cement, rod etc.)

Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material,disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 metres) Prestressed / Reinforced cement concrete grade M-20 & above

M.S. plate 6 mm for shutter and overtop

M.S. channel

M.S. flat (50 x 6 ) mm for fixing rubber seal

'J' type rubber seal 125 mm

Nuts & bolts ( assorted size )

M.S. washer ( assorted size )

M.S. Electrode 8.S WG

Red Oxide Primer

Antisol Red Oxide paint

Turpentine Oil

Steel wire brush

Painting brush 3"

J' type Rubber seal corner 125 mm

H.S. Diesel for Generator & Deptt's Vehicle

Guide channel separator with nut on both end with tube of length 250 mm to 460 mm

Refilled Oxygen Gas

Refilled D A Gas

M.S. Angle 75 x75 x 6 mm

M.S. Shaft ( Best Quality ) 50 mm dia

Thread cutting 2 TPI including fine finishing and making hole in one end as per direction.

C.I. Boss with internal thread cutting 2 TPI making groove for bearing slot for lock plate & 1.5" drill for providing handle as per direction for size : 125 mm x 150 mm

G.I. pipe for Boss handle & distant tube Size 25 mm

M.S. base Plate 300 x 300 x 10 mm

M.S. lock Plate 300 x 300 x 8 mm

H.D. Thrust ball bearing (best quality)ISI specified a)50 mm

Clamp for lock plate

Hire charge of crane with capacity 8 tonne with operator excluding fuel & lubricant.

supply of ordenary labour inclusive of all taxes

Arc welding cable 600 amps

Matured Jati Bamboo 75mm to 100mm dia and 6 m to 7 m long

Coir rope

Lubricating for generators and machineries

W B Grease

Waste cotton

First Aid Kit (comprising of items like Bandaid,detol100ml,iodin solution,antiseptic cream,scissor,cotton,bandage,burnol,spry etc complete)

Gas cutting hose pipe , 12 mm dia ( Red & Black )

Leather hand gloves

Arc welding mask

Gas cutting nozzle

Hacksaw blade 1.5" x 12 " ( double ended)

Nylon rope

Bhaba Kanta Nath