Maintenance of Public Toilet at Kottaiyadi in Tirunelveli Zone, Tirunelveli City Municipal Corporation. Ward No.15

Amount

Dismantling, clearing away the materials from work area as directed by department officer.

Floor finish and dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Plastering with Cement Mortar 1:5 mix. using 12mm thick with all cost and convleyance of materials and all labour charges etc., complete as per standard specification

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats over Iron works with ready mixed enamel paint of approved colour and quality including priming coat etc., complete

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Supplying and fixing of 18” size Oriya type Indian Water Closet with new glazed earthen ware Indian water closet of 20” Thrift pun type of approved quality with P or S trap with sand cushion and forming, flooring all-round the water closet using 40mm size broken with jelly in ration of in Cement Concrete of 1:2:4 (One cement, two sand and four aggregate) of 4” thick and plastering with Cement Mortar 1:3 (one cement and three sand) mix 20mm thick using river sand including fixing the water closet in positing and giving necessary connection to CI Stack etc., complete

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing best approved quality Brass C.P / Al anodised Towel rail 600mm. long and 20mm Diameter with brackets of same material including cost of Teak-Wood plugs and C.P.Screws etc., complete complying with standard specifications

Supplying and fixing best approved quality C.P.Soap Tray of size 150mm X 100mm including cost of Teak Woodplugs, brass screws complete complying with standard specifications.

Suppling and fixing in position 15mm diameter brass / C.P screw down tap / pillar tap / swan neck tap (heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.

Manufacturing supplying and fixing of MILD STEEL DOOR made out of 50 x 50 x 6 mm M.S angle for outer frame,35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets (18 G) with 5Nos, of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers.

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15A 3 pin non inter locking wall socket with 15A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) for open PVC plug point PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box in flush with wall with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire (SD 37)

Wiring with 2 x 1.5 sq.mm. (22/0.3) for open PVC light point /fan point PVC insulated unsheathed SC copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch in flush with wall covered with hylem sheet of 3mm thick with painting of suitable color (for electronic regulator) (SD 02)

Supply and fixing of 300mm SL bracket with fancy glass shade and 40W bulb

Supply and fixing of 30W LED Street Light Fitting with LED light complete and condensor with 19mm dia GI pipe (Class 'B') with 1 No. 19mm GI bend complete on the existing post / wall with 16A aerial fuse unit on MS plate with PVC unsheathed copper leads with MS clarnps

Supply and run of 2 of 6 sqmm (84/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100v grade in 25mm dia GI pipe (class B) suitably bend at both end with necessary angle iron upright and end support for mains

Supplying and following pipes and specials

25mm PVC Pipe

25mm PVC Union

25mm PVC FTA

25mm PVC MTA

25mm PVC Elbow

25mm PVC Bend

25mm PVC Coupler

25mm PVC Tee

25mm PVC Shoe

25mm Tank Fitting

25mm Ball Valve

25mm 3way Ball Valve

20mm PVC Pipe

20mm PVC Coupling

20mm PVC Tee

20mm PVC Ellbow

20mm PVC Bend

20mm PVC End

20mm Ball Valve Bronze

20mm Tank Fitting

20mm x 20mm Threaded Elbow

20mm x 100mm GI Pipe Nipple

15mm GI Elbow

15mm GI Hex Nipple

15mm x 300mm Pipe Nipple

15mm x 600mm Connection Hose

15mm x 100mm GI Pipe Nipple

32mm PVC Pipe

32mm PVC Coupling

32mm PVC Elbow

32mm PVC Bend

32mm GI Union

PVC Adhesive (Solution)

Shellac

Thread Ball

Wooden Plug, Clamp and Screws

110mm PVC Pipe

110mm PVC TEE

110mm PVC bend

110mm PVC Elbow

110mm PVC Shoe

PVC Tank

Labour (Plumber: 1-Skilled, 1-Semi Skilled)

Writing name of the toilet using paint in toilet building as specified by department officers and the rate includes labour & material.

Cleaning the toilet area all around and removing debrises complete as directed by department officers