Annual Maintenance Contract of Electric Loco Cab Roof Mounted AC Units of WAP- 4 and Three Phase Loco (WAG-9/ WAP-7) Electric Loco of Electric Loco Shed, Itarsi, including replacements of spares for a period of 02 years.

MINIMUM ELIGIBILITY CRITERIA FOR OPEN TENDERS COSTING ABOVE Rs.50 LAKHS:-As-per Clause-10, of latest General conditions of contract. of April'2022 & Rly. Board Letter No.2019/Elect(G)/165/1, dtd. 22.4.2020. (A)For OEM's or RDSO Approved sources and exception shall be extended to PU's approved sources for tendered work:- No specific minimum eligibility criteria is required. (B)For sources which are not OEM's or sources approved by RDSO and PU's approved sources for tendered work:- Following minimum eligibility criteria will be applied: - (b)Financial Eligibility Criteria:-The tenderer must have minimum average contractual turn-over of V/N crores; where V = Advertised value of the tender in crores of Rupees N = Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Note:- (1) The Eligibility criteria mentioned above (a) & (b) under (B) are dispensed with, in case of bidders who are either OEM's or sources approved by RDSO and PU's approved sources for tendered work.

MINIMUM ELIGIBILITY CRITERIA FOR OPEN TENDERS COSTING ABOVE Rs.50 LAKHS:- As-per Clause-10, of latest General conditions of contract of April'2022 & Rly. Board Letter No.2019/Elect(G)/165/1, dtd. 22.4.2020. (A)For OEM's or RDSO Approved sources and exception shall be extended to PU's approved sources for tendered work:- No specific minimum eligibility criteria is required. (B)For sources which are not OEM's or sources approved by RDSO and PU's approved sources for tendered work:- Following minimum eligibility criteria will be applied: - (a) Technical Eligibility Criteria:- The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (Seven) years, ending last day of month previous to the one in which tender is invited. (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar works costing not less than the amount equal to 60% of advertised value of the tender.

The similar nature work is ""Manufacturing, supply, Erection, Testing and Commissioning of Roof Mounted package unit (RMPUs) along-with its control panel of A.C. coaches/Electric Loco/EMU/Metro Coaches". OR "Annual Maintenance Contract" or "Comprehensive Maintenance Contract" or "Repairing/servicing/Rehabilitation" of RMPUs) along with its control panel of A.C. coaches/Electric Loco/Diesel Loco/EMU/Metro Coaches running over Indian Railways. O R "Manufacture, supply & commissioning of AC Package units or Split type ACs or Centralized air conditioning systems or a combination of any of said three types with at least a capacity of 1.5 TR and above." OR "Repair/Rehabilitation/Overhauling of AC Packages units or split type ACs or centralized Air Conditioning Systems or in combination of any of said three types with at least one unit of 1.5 TR capacity or above, should have been included in each work order."

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

Successful contractor shall submit Valid EPF,GST registration certificate before execution of work as applicable.