REPAIR AND REPLACEMENT OF OLD US FLAME PROOF WIRING, LIGHT FITTING, ROTARY SWITCH, MCB DBs AND CONNECTED WORK AND REPAIR AND REPLACEMENT OF PVC / PUF INSULATED WATER STORAGE TANK, PPR/GI/DI PIPE, FITTINGS AND FIXTURES, GATE VALVE, BALL VALVE OF DI

Amount

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

M&L for point wiring for one light point or one fan point controlled by one switch with cables 1.5 sq. mm size, wiring with copper conductor cables FRLS in stove enamelled Steel Conduit complete all as directed by Engr-in-Charge. (a) For six light point controlled by one switch

All as per serial item No 2 here-in-before, but for one socket outlet 16 Amps with 2.5 Sqmm copper conductor ables FRLS in stove enamelled Steel Conduit complete all as directed by Engr-in-Charge.

S&F in replacement of LED light fitting 2 x 16 watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size. complet all as specified and as directed by Engineer-in-Charge.

S&F in replacement of Flameproof cum Waterproof LED Bulk Head light fitting of 30W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size.complet all as specified and as directed by Engineer-in-Charge.

S&F in replacement of Switch Socket combination flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and as directed by Engr-in-charge.

S&F in replacement of Flame proof rotary type switch combined in cable termination box in LM6, 16A, 250V, single pole On-Off complete all as specified and as directed by Engr-in-charge.

S&F in replacement of Sheet metal enclosure powder coated single phase flame proof 12 way DB, 200 Amps rated bus bar, 240V with flame proof MCB incoming & outgoing , LM6 of size 400x400x125 mm for fixing MCBs all as specified and directed by Engr-in-charge.

M&L for earthing with galvanized steel earth plate electrode of size 600 x 600 x 6 mm buried directly in ground earth pit not less than 2.25 mtr below of normal ground level with top edge of earth plate should not less than 1.5 mtr below normal ground level and connected to galvanized iron earth lead wire of size 4 mm dia by means of bolts, nuts, washers of galvanized iron or steel all as shown in electrical plate No.3 of MES SSR Part I connecting to earthing test point on completion with and including 15 mm bore GI light grade protection pipe (7.5 mtr long) for earth lead GI lead wire 4mm dia (7.5 mtr long), PCC pit with cover in PCC 1:2:4 type B-1 reinforced with 8 mm dia tor bars @ 80mm C/C, 20mm dia medium grade watering pipe with funnel, wire mesh, common salt, charcoal, necessary excavation and earth work, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of GI tubing in trenches and getting out all in hard and dense soil complete all as specified by Engineer - in - charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engineer-in-Charge.

Removing excavated material (soil) to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point.

Taking up or down old unserviceable DI/GI tubing connection including disconnection of fittings from tubing where required and cleaning for refixing or removal from site complete as directed by Engr-in-Charge of following sizes :-

PPR/GI pipe 20 mm dia

PPR/GI pipe 25 mm dia

PPR/GI pipe 32 mm dia

PPR/GI pipe 40 mm dia

GI/PPR pipe 50 mm dia

DI/GI pipe 80 mm dia

DI Pipe of 100 mm bore

DI Pipe of 150 mm bore

Supply & laying of water pipe lines of the following sizes and grade complete with fittings (such as bends, elbows, tees, short pieces, connectors, caps, plugs, unions and screwed socket joints etc) laid in trenches complete as directed by Engr-in-Charge, of following sizes (Note when pipe laid in straight line then the 3rd length is required to be connected by union. :-

GI pipe, Med grade 20 mm dia

3- layer PP-R Polypropylene random copolymer) concealed 20 mm dia pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches.

GI pipe, Med grade 25 mm dia

3- layer PP-R Polypropylene random copolymer) concealed 25 mm dia pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches.

GI pipe, Med grade 32 mm dia

GI pipe, Med grade 40 mm dia

GI pipe, Med grade 50 mm dia

GI pipe, Med grade 80 mm dia

DI pipe of 80 mm bore

DI pipe of 100 mm bore

DI Pipe of 150 mm bore

Supply only GI fittings, medium grade, ISI marked of following sizes:-

Union 15 mm dia

Union 20mm

Union 25mm

Union 40mm

Union 50mm

Socket 15 mm

Socket 20 mm dia

Socket 25 mm dia

Socket 40 mm dia

Socket 50 mm dia

Elbow 15mm

Elbow 20mm

Elbow 25mm

Elbow 40mm

Elbow 50mm

Nipple 15 mm dia 2inch long

Nipple 15 mm dia 4 inch long

Nipple 15 mm dia 6 inch long

Nipple 20 mm dia 2 inch long

Nipple 20 mm dia 4 inch long

Nipple 20 mm dia 6 inch long

Nipple 25 mm dia 2 inch long

Nipple 25 mm dia 4 inch long

Nipple 25 mm dia 6 inch long

Plug 15mm

Plug 20mm

Plug 25 mm

Plug 40 mm

Tee 15 mm

Tee 20 mm

Tee 25 mm

Tee 40 mm

R Socket 40mmX50mm

R Socket 15mmX20mm

R Socket 20mmX25mm

Union 32mm dia

R Elbow 40mmX50mm

R Elbow 20mmX25mm

R Elbow 15mmX20mm

Taking down old unserviceable gate valve / stop valve of any size complete.

Supply and fixing gun metal, globe or gate valve for 50 mm dia pipe with iron wheel head, screwed both ends ISI marked

All as per item ser No. 17 here-in before but 25mm size.

All as per item ser No. 17 here-in before but 20mm size.

M&L for run lead joint for 100 bore CI/DI pipe all as specified and directed.

S&F 20 mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete.

All as per item No. 21 here-in- before but 25 mm bore all as specified and direceted.

Taking down old unserviceable CI sluice valve for 80/100 mm dia pipe complete.

Supply & fixing cast iron sluice valve for water supply purposes with CI drilled flanged end internally cast for 150 mm nominal bore class PN 1.6 horizontal type conforming to IS 760, ISI marked with stainless steel spindle & iron wheel non using type including jointing material complete such as rubber assertion packing rings with requisite no of nuts & bolts , washers of requisite size etc all as specified and directed by the Engr-in-Charge.

All as per item No 24 here in before but here sluice valve internally cast for 100 mm nominal bore.

All as per item No 24 here in before but here sluice valve internally cast for 80 mm nominal bore. (Make : Kirloskar or equivalent approved make)

Taking down old unserviceable CI butterfly valve for 50 mm dia pipe complete.

Supply & fixing cast iron butterfly valve for water supply purposes with CI drilled flanged end internally cast for 50 mm nominal bore class PN 1.6 horizontal type conforming to IS 760, ISI marked including jointing material complete such as rubber assertion packing rings with requisite no of nuts & bolts , washers of requisite size etc all as specified and directed by the Engr-in-Charge.

S&F in replacement gunmetal foot valve 80mm dia complete all as specified and directed by Engineer-in-Charge.

S&F in replacement gunmetal foot valve 40mm dia complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Rotational moulded polyethylene 1000 Ltr capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specifiedand directed by Engineer-in-Charge.

S&F in replacement Rotational moulded polyethylene 500 Ltr capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specifiedand directed by Engineer-in-Charge.

S&F in replacement Puff tank of 1000 Ltr capacity, insulated cylinderical vertical type double layer duly filled with glass wool with closed top hoisted and to resist in temperature between -30 degree to +35 degree celcius fixed in position with all fittings complete all as specified and directed by Engineer-in-Charge.

Material and labour for valve chamber on existing chamber foundation with 230mm thick brick wall in CM 1:6, 75mm thick coping in PCC 1:4:8 (Type B1), 15mm thick plaster in CM 1:4 over all internal and external wall surface,50x50x5mm thick MS Angle iron frame and 3.0 mm thick MS chequd plate cover with hinges and necessary locking arrangements painting with two coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed including dismantling and removal of existing damaged chamber except PCC foundation of internal size 900mm x 900mm x 900mm. complete all as directed by the Engr-in-Charge.

M&L for servicing of centrifugal pump electric driven AC 3 Phase 415 volt 15 to 30 HP capacity by replacing of unserviceable terminal blocks and 2 Nos bass bearing, bushes and bolts and nuts and re-assembling same incl varnishing with super enamelled varnish to motor winding at site including testing complete all as specified by Engineer-in-Charge

Dismantling/ Disconnecting Monoblock cetrifugal pump 1 HP from the site S&F the same complete all as specified and dierected by Engr-in-charge.

Supply , Installation, testing & commissioning of Horizontal Multistage Centrifugal Pumping Set suction & discharge 50/80 mm, electric motor driven with the following technical specifications:- (i) Discharge : 4 LPS (ii) Head : Suction Head 30 mtr and discharge head 130 mtr (iii) RPM : 2900 (iv) Material of construction of impellers : Bronze (v) Motor rating : 20HP (vi) Stage : 5 (vii) Motor Eficiency : IE2

Supply , Installation, testing & commissioning of Horizontal Multistage Centrifugal Pumping Set suction & discharge 50/80 mm, electric motor driven with the following technical specifications:- (i) Discharge : 4 LPS (ii) Head : Suction Head 30 mtr and discharge head 180 mtr (iii) RPM : 2900 (iv) Material of construction of impellers : Bronze (v) Motor rating : 30HP (vi) Stage : 5 (vii) Motor Eficiency : IE2

Supply, installation, testing and commissioning, in replacement, of Feeder Pillar box , cubical type, factory made, outdoor type, dust and vermin proof, fabricated out of mild steel sheet not less than 3.15 mm thick, and mild steel angle iron frame complete with openable shutters in front and rear having proper locking arrangement including 04 Nos legs made out of angle iron of suitable size and height of each leg shall be grouted in PCC. Feeder Pillar box shall be spray painted internally and externally with two coats of synthetic enamel paint over a priming coat of red oxide primer and connecting all incomming and outgoing cables with suitable size of Aluminium lugs complete all as specified and as directed by Engineer-in-Charge and comprising of following accessories/fittings.

Supply, installation, testing and commissioning, in replacement, of Feeder Pillar box , cubical type, factory made, outdoor type, dust and vermin proof, fabricated out of mild steel sheet not less than 3.15 mm thick, and mild steel angle iron frame complete with openable shutters in front and rear having proper locking arrangement including 04 Nos legs made out of angle iron of suitable size and height of each leg shall be grouted in PCC. Feeder Pillar box shall be spray painted internally and externally with two coats of synthetic enamel paint over a priming coat of red oxide primer and connecting all incomming and outgoing cables with suitable size of Aluminium lugs complete all as specified and as directed by Engineer-in-Charge and comprising of following accessories/fittings :-

S&F in replacement star delta stater 3 phase 415 V suitable for 30 HP monoblock/centrifugal pump set and making all necessary connection, complete all as specified and dierected by Engr-in-charge.

M&L for Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc capacity upto 1000 ltrs.

VIMAL TRADERS AND SUPPLIERS

M/S VISION ENGINEERS