Janpad Siddharthnagar ke NH-730 se mini audyogik Kendra-Parsa marg ke chaudikaran and sudhrikaran ka karya

Clearing and Grubbing Road land including uprooting rank vegetation, grass, bushes, shrubs, shaplings and trees girth upto 300 mm, removal of stumps of trees cut earlier and disposal of unservicable material and stacking of servicable material to be used as per Clause No.-201 excluding GST but including all taxes, labour cess, royalty, labour, material and T&P in all aspects or as per direction of E/I

Scraping of Old Painted Surface including disposal of all scrapped material for a distance of 30m as direction by Engineer in Charge.as per MORTH specification clause No.3.15 -305.4.3 excluding GST but including all taxes, labour cess, royalty, labour, material and T&P in all aspects or as per direction of E/I

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m as per MORTH specification clause No.-301 excluding GST but including all taxes, labour cess, royalty, labour, material and T&P in all aspects or as per direction of E/I

Construction of embankment (5 km cartage) with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting density not less than 97% of desireved density (of JMF) to meet requirement of table 300-2. as per MORTH specification clause No.3.16 -305 excluding GST but including all taxes, labour cess, royalty, labour, material and T&P in all aspects or as per direction of E/I

Construction of granular sub-base (Grade-I) by providing close graded material, spreading in uniform layers with 3.5 meter motor grader on prepared surface, mixing by mix in place method with 1 cum capacity front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MORTH clause No.-401 with design job mix approved by compentent authority excluding GST but including all taxes, labour cess, royalty, labour, material and T&P in all aspects or as per direction of E/I.

Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical 100 tonne mix plant carriage of mixed Material by 10 cum capacity tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.complete as per MoRTH clause 406 With Design Job Mix Approved By Competent Authority excluding GST but including all taxes, labour cess, royalty, labour, material and T&P in all aspects or as per direction of E/I.

Providing and applying Primer Coat with SS2 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 Kg/sqm using mechanical means. as per MoRTH specification clause No. 502 excluding GST but including all taxes, labour cess, royalty, labour, material and T&P in all aspects or as per direction of E/I.

Providing and laying Dense Graded Bituminous Macadam(Gr.II) thickness 60 mm with higher capacity batch type 120 HMP using crushed aggregates of specified grading, premixed with bituminous VG-30 binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic 174 HP paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. With Design Job Mix Approved By Competent Authority excluding GST but including all taxes, labour cess, royalty, labour, material and T&P in all aspects or as per direction of E/I.

Providing and applying tack coat with bitumen VG-10 usung bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. as per MoRTH specification clause No. 503 excluding GST but including all taxes, labour cess, royalty, labour, material and T&P in all aspects or as per direction of E/I.

Providing and laying bituminous concrete (Gr-2) thickness 30 mm with higher capacity batch type hot mix plant capacity 120 HMP using crushed aggregates of specified grading, premixed with bituminous VG-30 binder @ 5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling smooth wheeled, vibratory with and tandem rollers to achieve the desired compaction as per MORT&H specification clause No. 507 complete in all respects With Design Job Mix Approved By Competent Authority excluding GST but including all taxes, labour cess, royalty, labour, material and T&P in all aspects or as per direction of E/I.

Earth work in cutting or filling in pattri in ordinary soil (Loam, Clay or Sand) excavation to be in the form of pit not exceeding 50cm in depth and embankment to be 20cm layers including the spreading grading to required levels slopes and compacted to not less then 97% standared proctor density at omc meet requirement of table 300.2 and also including 1.50 m lift and 30.0m lead. The earth from cutting to be used in making embankment or to be deposited as spoil bank within 30.0 mtr distance as per MORT&H specification clause No. 305 excluding GST but including all taxes, labour cess, royalty, labour, material and T&P in all aspects or as per direction of E/I.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom , backfilling the excavation earth to the extent required and utilising the remaining earth locally for road road with approved material. As per MoRT&H Spec. Sr. No. 3.13 clause 304 As Per SOR-251excluding GST but including all taxes, labour cess, royalty, labour, material and T&P in all aspects or as per direction of E/I.

Cement Concrete with 40 mm gauge Stone ballast, sand of 1.25 FM & Cement in the proportion of 6:3:1 including supply of all materials labour T&P etc. complete required for proper completion of the work With Proper Curing as per S.I. No. 280 excluding GST but including all taxes, labour cess, royalty, labour, material and T&P in all aspects or as per direction of E/I.

Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade (M-20) as per MoRTH 13.05 (A) 1500,1700 & 2200 with curing complete in all respects excluding GST but including all taxes, labour cess, royalty, labour, material and T&P in all aspects or as per direction of E/I.

Supplying, fitting and placing with govt. Approved HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications with approved test report as per MoRTH 13.06 1600 & 2200 with curing complete in all respects excluding GST but including all taxes, labour cess, royalty, labour, material and T&P in all aspects or as per direction of E/I.

05 Year Maintenance- 1st Year maintenance charge @ 0.00% including all Taxes, labour cess, but exculuding.GST.

2nd Year maintenance charge @ 0.25% including all Taxes, labour cess, but exculuding.GST.

3rd Year maintenance charge @ 0.50% including all Taxes, labour cess, but exculuding.GST.

4rth Year maintenance charge @ 0.75% including all Taxes, labour cess, but exculuding.GST.

5th Year maintenance charge @ 1.00% including all Taxes, labour cess, but exculuding.GST.

Please Enable Macros to View BoQ information