Supply and fabrication of Entrance arch and toilet block at Eco Park Nanmangalam RF in Tambaram Range of Chennai Division

Amount

Supplying, fabricating and erecting the specially designed trunk like structure as per approved design in 3mm MS sheet upto 2m level from ground and fixing over the 6mm MS Plate as base supports.Each element shall be of size 200mmX2m of 5no. each on both sides.The rate to include material and labour charges for welding,fixing and all accessories complete.

Supplying, fabricating and erecting the Inner stem like structure with 50mm MS round pipes mechanically bend to match the approved design. Each stem will have 8No. 50mm MS round pipe upto a maximum height of 4.8m from Ground level. The rate to include material and labour charges for welding,fixing and all accessories complete.

Supplying, fabricating and erecting the branch like structure on top with 50mm MS round pipes mechanically bend to match the approved design. Each stem will have 8No. 50mm MS round pipe supported /welded on top having an average lenghth of about 5m on both sides. The rate to include material and labour charges for welding,fixing and provision for fixing or welding butterfly/insect designs, all accessories complete.

Supplying, Fabricating and fixing the specially designed butterfly/Insect designs in 3mm MS sheets cut to suit approved design. Each butterfly cut design to have a maximum dimension of 1.1X 1.1m

Earthwork excavation for foundation in all soils and sub-soils and to full depth as may be directed by departmental officers

Plain cement concrete 1:5:10 using 40mm Hard broken granite stone jelly including all cost of material and labour charges etc. complete with standard specification

providing formwork for shuttering for all reinforcement works using mildsteel sheets and frames and 10cm to 13cm casuarina props for strutting and 5-X75mm silver Oak scantlings for runners

Reinforced cement concrete in 1:2:4 mix using 20mm HBGS including cost of all materials but excluding cost of steel reinforcement grills and centering, levelling, laying, consolidation and curing,etc. complete as per standard specification.

Supplying and fabricating steel reinforcement works

Supply and Fabrication of Specially designed heavy steel work with welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.For Main Gate and Fixed Side Gates of total size 6m Width X 1.8m Height including all accesories complete.

Supplying, Fabricating and fixing the butterfly designs in 3mm MS sheets cut to suit approved design.Butterfly cut design to have a maximum dimension of 2.35(width)X 2.1m(height)

Supplying, Fabricating and fixing other designs on both sides in 3mm MS sheets for side fixed gates cut to suit approved design. Each fixed will be of size 1.2(width)X 2.4m(height)

Providing and fixing of vertical posts in MS Sq.tubes of size 80X80X 3mm thick of Appollo/equivalent make as internal frame structure vertically at about 60 cm centres from ground level and 3nos of MS rectangular tubes of Size 60X40X2.5mm horizontally for Partitions of 2400mm height.

Supply, fabrication & erection of 3mm thick prefabricated laminated Panels - fixed to the MS framework at desired levels, made with Aluminium box section of size 50mmX25mm X3mm if necessary over MS brackets for 5' Projection on both side, bolt nut arrangement with SS Screw,aluminium L cleats, backets, rod, DOWCORNING multipurpose silicon weather sealant no 789.The panels will be bent in the curved form, and to any profile to the required size and fixed over the framework with necessary L clamps and finished with backer rod and silicon sealants stated above and as the specification etc. all complete. Rate also includes the filling material (if required) inside framework to ease plumbing works.

Providing and fixing Toilet Cubicle Partitions (of following standard dimension which includes 700 mm door size width) made of heat, bacteria, water, chemical, scratch, impact and anti bacterial resistant 12 mm thick solid compact laminate panels which include doors and intermediate panels finished with approved texture/ shade asper the detail drawing and as per IS 2046 (Indian Standard) and as per fire retardant BS-476/97 standard. This also includes providing and fixing in position necessary hardware including Door Knob, Gravity Hinges, Screws &wall Plugs all complete

Prociding and fixing colour coated trapezoidal sheet of approved make in liner profile of 1010mm width cover all as per approved design. The total coated thickness (TCT) of the sheet will be 0.35 mm +/-0.02 mm tolerance Zinc-Alu Alloy coating AZ150 gsm as per ASTM 1397/A755-550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling/self tappingscrews of 25 mm length, to be fixed over the MS framework.

Providing and installing of pre painted Galvalume iron Trapezoidal profiled sheet of approved make 1060 mm width (1000mm cover width) all as per approved design, 28-30 mm crest height with crest distance of 200 mm c/c with 2 ribs at the centre for stiffening. The total coated thickness (TCT) of the sheet will be 0.47 mm +/-0.02 mm tolerance Zinc-Alu Alloy coating AZ150 gsm as per ASTM 1397/A755-550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling/self tappingscrews of 25 mm length, to be fixed over the MS framework with purlins, rafters. channels and trusses, etc all complete as per approved design

Providing and fixing Galvanised openable steel doors of 40mm thickness of size 750X2100mm. The door and frame should have adequate reinforcement including fitments and all accessories complete.

Providing and fixing Galvanised sliding steel doors of 40 mm thickness of size 900X2100mm. The door and frame should have adequate reinforcement including fitments and all the accessories complete.

Supply and fixing of MS Chequered Plate by Gas cutting method and high quality appropriate welding as per BIS of new Chequered Plate pieces in position to fabricate Chequered Plate over civil base with necessary supports including supplying of all labours, and charges for welding machine, Gas Cutting set necessary with adequate saftety and protection as per requirement.

Supplying and fixing UPVC louvered ventilators of sizes as per drawing with outer frame 60mmX58mm and shutter profile size of 60mmX78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multichambered sections with wall thick of 2mm. The EPDM rubber(black color) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin head glass 4mm thick should be provided in the louvers. The ventilators should be fixed to the wall with 100% packing with screws and silicone packing all around the frames.

Supply and fixing tree like structure in MS sheet cut to design as per approved drawing.

Providing and fixing PVC laminated false ceiling as per approved design suspended with the frame work and accessories completed from the truss work etc. by means of aluminum angles, J bolts, Tee runners and edge trim etc., cuting the openings for fixing light fittings, including cost of materails, labours, lead and lift finishing etc. complete as per specification.

Paving the floor with best quality vitrified tiles of size 600X600X8mm of approved color, shade and quality laid in CM 1:3(1cement, 3 crushed stone sand) 20mm thick in floors and top pointed with white cement mixed same color pigments etc., complete complying with standard specification

Supplying and fixing in position white colour European water closet with 'P' or 'S' trap with double flapped seat and seat cover with brass hinges and 12.5 litres capacity porcelain low level flushing tank connecting with CI pipe of 100mm dia/PVC pipe of 110mm dia, double flapped rigid PVC seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spunyarn, teak wood plugs, brass screws, etc.,

Supplying and fixing in Lipped Mouth Porcelain Flat Back Urinal with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple etc

Supplying and fixing in position white colour hand wash basin of 550mm X400mm with all accessories such as cast iron brackets, 32mm dia CP waste coupling, Rubber plug and chain, 32mm dia 'B' Class GI waste pipe, 15mm dia GM wheel valve, 15mm dia Nylon connection, 15mm dia brass nipples, 15mm CP pillar tap, etc.

Supply and fixing of PVC sintex water tank 1000 liter

supply and fixing of 110mm - 6kg PVC pipe

supply and fixing of 75mm - 6kg PVC pipe

supply and fixing of 25mm - 10kg PVC pipe

Supply, Installation and Commissioning for Biodigester tank along with inoculum of size 1.5mX1.5mX1.0. Rate to include excavation and all accessories and necessary connections complete.

Fine art painting for specially designed butterfly/Insect cut elements as per approved design with two coats (with matching shade) with super gloss (hi-gloss) of approved quality on steel and other metal surface over a coat of anticorrosive paint after thoroughly scrapping the erected surface.

Painting two coats of synthetic enamel paint for iron works of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt etc., complete complying with standard specification.

New electrical point including wiring, 18W LED round type recessed indoor light fitting,etc

PPK CONSTRUCTION (BID ID -1547415)