Certain repairs to boundary wall including connected work of installation buildings under AOR of AGE E/S-I under AGE (I) (U) B/R Delhi Cantt-10.

Amount

Taking down cement plaster, any description from brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work on concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for applying two coats of cement base paint over a coat of primer (chalk whiting ) over new surface complete all as specified and as directed.

Dismantling of brick masonary work built in Cement mortar or cement lime mortar complete all as specified and directed by Engr-in-Chrage.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in 15 mm thick cement mortar 1:6 complete all as specified and directed.

- ditto - all as per above item No. 5 but except old bricks obtained from dismantaling.

Removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish from site.

M & L for washed stone grit plaster on exterior walls in two layers,under layer 12mm cement plaster 1:4 (1 cement :4 coarse sand) furrowing the under layer with scratching tool,applying cement slurry on the under layer @ 3 Kg of cement per square metre,top layer 15mm cement plaster using white cement in the top layer of the item of washed Marbal stone chipping grit plaster 1:1/2:2(1 White Cement:1/2 coarse sand:2 Marbal stone chipping 10mm nominal size) including pigment(colour) to be added as per approved by Engr-in-Chrage in panels with groove all around as per approved pattern including scrubbing and washing,the top layer with brushes and water to expose the stone chippings complete all as specified and directed by Engr-in Chrage (Payment for providing grooves shall be made separately).

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens,nailed to the under layer including removalof wooden battens,repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-Chrage.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

M&L for framed work such as gate(any size), grills,gratings,etc with ends of bars shouldered and/or riveted,or forged into spikes framed guard bars barred iron doors ladders framed balusters,walk ways,railing,framework of water tank and similar work con-forming to Fe.290.Gde-E-165.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position complete all as specified and as directed.

Excavation in trenches , n.exc 1.5 m wide and n.exc 1.50 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed

M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregates), as in foundation filling and mass concrete complete all as specified and as directed.

M&L for TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

- ditto - all as per above item No. 15 but 6 to 8 mm dia bar.

M&L for formwork to sides of flat concrete foundations, footings, bases of coullmns, raft and raft beams, sides and soffits of foundations and plinth beams and similar work complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and sanchions complete all as specified and directed.

M&L for RCC (nominal mix) concrete type B1 1:2:4, using 20 mm graded stone aggregate as in foundation including rafts footings , foundations beams, plinth beams, bases for coulmns etc basement slab, undereamed piles and mass concerte all as specified and dirceted.

M&L for reinforced cement concrete (nominal mix) of 1:2:4 type B-1 (20mm graded aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed.

Returning , filling in incl spreading levelling and well ramming and watering in layers n exc 25 cm complete all as specified and directed.

Removing excavated material n.exc 50 m and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed.

M&L for 20 mm thick grenite ( of any type ) work (table rounded and polished) in coloumn, jambs, brick pillars, over 15mm thick rendering in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixer of pigment to match with shade of granite complete all as specified and directed.

S&F of concentrina coil fencing wirth punched tape concertina coil 600 mm dia 10 mtr openable length having 50 Nos rounds per 6 mtr length , spring core wire ( 2.5mm thick) of high tensile strength of 165 Kg/Sqmm with tape (0.52 mm thick and weight 43.478 gm/metre and fixing the same with existing Y shape Angle iron with 6 horizontal R.B.T ( Reinforced Barbed Tape) wire, stud tied with GI Staple sand GI clips to retain horizontal including dismatling all complete as per direction of Engineer-in-Charge.

M&L for PCC (1:2:4) type B-1 (20mm graded aggregate) as in kerbs/coping and the like including weathering, slightly rounded or chamfered angles and throating, including formwork complete all as specified and directed.

HANUMAN BUILDERS

SURESH KUMAR SHARMA & CO

UNIQUE BUILDERS

SAGAR ENTERPRISES

ergon enterprises

Som Nath Kakkar

M/S GEETANJALI ENTERPRISES

M/s SAAR ENGINEERS