REPAIR/CLEANING/LAYING OF MANHOLE, SEWAGE LINE, SEPTIC TANK, FENCING PATH, HARD STANDING ETC IN POCKET 9 AND REPAIR/MAINT OF CERTAIN MISC E/M WORKS AT RTS AND DEPOT SAHARANPUR UNDER GE ROORKEE

Dismantling wrought iron or mild steel work of any description and removal from site complete all as specified and directed.

M&L PCC (1:3:6) type C-2 using 40 mm grade stone aggregate as in foundation, filling and mass concrete all as specified and directed.

Dismantling old GI wire any type complete all as specified and directed.

Excavating in post holes in soft/loose soil each n exc 0.5 cum, getting out, and returning filling in and ramming with concrete around, and removing surplus soil to a distance n exc 50 m complete all as specified and directed.

Fixing only New/Old chain

Supply only chain link MS Galvanised fencing, any size or type complete all as specified & as directed.

link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed.

S&F Mild & steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc. 5 cm and 5 to 10 mm dia complete all as specified & as directed.

S&F in repair Galvanised 2 strand steel barbed wire 2.24 mm barbed with 2 mm dia barbs @ 75 mm spacing straining and fixing including securing or lying at crossing with and provision of galvanised MS staples or steel pins incl dismentling of old barbed wire complete all specified and directed

Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but exluding ashlars facings, dressed stone work and pre-cast concrete articles all as directed.

M&L MS works as in Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets for securing wire mesh etc) including all necessary drilling bolting or riveting etc and similar work confirming to Fe 290 Gde E-165, complete all as specified and directed.

M&L for Broken glass coping in cement mortaar (1:3) on top of walls complete all as specified and directed.

M&L Rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed.

M&L Three coat of white wash on wall including preparation of new plastered surfaces all as specified and directed.

M&L for cleaning of blocked WC, Gully trap, Floor trap and Nahani trap incl cleaning branch piece from trap to connecting bend or junction complete all as directed.

M&L for cleaning of blocked/ chocked pipe line of 100 mm dia from floor or gully trap or from cleaning eyes, up to Ist manhole in any depth by rodding or by mechanical means and well flushing the complete line up to Ist man hole including removing of sludge/ waste to low lying areas within 200 m distance and burring the same properly to the entire satisfaction of Engineer- in- Charge, with and including taking out and re-fixing of manhole covers duly set in cement mortar 1:4 as and where required complete all as specified and directed. Note for item No. 22 to 26 : All blockages/complaints to be cleared within 24 Hrs. If any blockage is not cleared within 24 Hrs, a panelty of Rs 250/- per a/u shall be imposed to the cotractor for every day of delay.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for cesspit, manhole etc,and getting out in soft/loose soil even in foul position complete all as specified and directed.

Returning, filling in incl spreading leveling watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as directed.

S&F in repair PVC flushing cistern of 10 ltr capacity complete with ball valve, float and handle incl bracket complete all as specified.

Removing excavated material (Soil) n exc. 50m and depositing where directed at a level n exc 1.5 m above the starting point

Demolition and breaking up of existing drain pipe (SGSW/ PVC/ RCC etc) set in cement mortar of internal dia of pipe 150 mm complete all as directed.

Taking down cement plaster any description on brick or stone walls/RCC walls surfaces etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified & as directed.

Taking off existing cover of septic tank, cesspool, soak well, soak pit or manhole and Cleaning of septic tank including connecting chamber by pumping out sludge water incl taking out mud sludges from tank to remove a distance exc 50 mtr and not exc 100 mtr, placed in the trenches not less than 01 miter deep from ground level and incl refilling the trenches with excavated earth to cover sledges placed, all as directed by Engineer-in-charge.

S&F in repair 75mm PVC (SWR) multi floor trap with grating including jointing with solvent cement and making the surface good complete all as specified and directed.

S&F deformed or twisted TMT bar 6 mm to 8 mm dia cut to length, bent to shape required, incl cranking bending and binding with MS wire (annealed) not less than 0.9mm or securing with clips complete all as specified & as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, and seat cover complete all as specified.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 meter mean radius with old size bricks built in CM (1:4), complete all as specified & as directed.

M&L Rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed by Engr-in-charge.

Ditto all as above but of size 75mm

S&F in repair Vitreous China squatting pan Orissa pattern size 580X440mm white with integral foot rest (excl flushing cistern and flush pipe) incl fixing in position using cement concrete (1:5:10) Ty E2 complete all as specified and directed.

M&L PCC (1:2:4) type B-2 using 40 mm graded stone aggregate as in floor etc 100 mm thick finished even and fair laid in alternate bays, with spike rolling to surfaces or making impression of expended metal whilst the concrete is green complete all as specified and directed.

M&L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundations, filling, mass concrete and sub base of floor etc complete all as specified and directed.

2 Conductors with / without GI wire

5 Conductors with / without GI wire

6 Conductors with / without GI wire

Spacer for two wire

Spacer for three wire

Spacer for four wire

3.5 core 120 sq.mm.

3.5 core 95 sq.mm.

3.5 core 70 sq.mm.

3.5 core 50 sq.mm.

4 core 35 Sqmm.

4 core 25 sq.mm

2 core 16 sq.mm.

2 core 10 sq.mm.

Supply and laying brick protection cable cover using sub class ‘B’ bricks laid flat adjacent to each other across the length of cable laid dry complete all as specified & directed by Engr-in-charge.

MCCB rating 250 Amp FP, Breaking capacity 36 kA, including over load and short circuit protection, 415 Volts.

-do- but rating FP 200 Amp, 36 kA

-do- but rating FP 160 Amp, 36 kA

–do- but rating FP 125 Amp, 25 kA

–do- but rating FP 100 Amp, 16 kA

–do- but rating FP 63 Amp, 16 kA

–do- but rating TP 100 Amp , 16kA

MCCB Four pole 400 Amp, 36/35kA, Thermal magnitc adjustable type including over load and short circuit protection, 415 Volts complete all as specified and directed.

Taking down defective 90/120 Watt led fitting mounted on 11 mtr long Semi high mast consisting of LED flood light fittings (Approx 4 to 6 Nos), street light fitting, mounted on 11/13mtr long high mast pole on bracket/round ring, disconnecting, testing all components, dismantling of defective components such as driver of LEDs and cleaning of cover, connection with supply and testing the street light fitting after fixing new components and then mounting to its original position and making the fitting functional all as specified and directed.

M&L earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level and covered surrounded from all sides with mixture of charcoal and common salt in alternate layers upto 15cm above top of plate and electrode connected to galvanized iron strip 32x6 mm size by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 40 mm bore (light grade) c

All as per above but Copper electrode 300mmx300mmx3.00 mm thick and copper strip 25mmx3mm thick complete all as specified and directed.

Ditto all as per item no 72 but LT pole 9 mtr single pole

S&F in replacement of Flood light fittings suitable for LED 150 watt IP 66 with lens complete with all accessories as directed.

Supply only Driver for LED fitting 30 watt as per existing Make & Model

Supply only Driver for LED fitting 45 watt as per existing Make & Model

Supply only Driver for LED fitting 60 watt as per existing Make & Model

Supply only Driver for LED Flood fitting 100 watt as per existing Make & Model

Supply only Driver for LED Flood fitting 120 watt as per existing Make & Model

Supply only street light MCPCP for LED fitting 45 watt as per existing Make & Model

Supply only street light MCPCP for LED fitting 60 watt as per existing Make & Model

Supply only street light MCPCP for LED fitting 70 watt as per existing Make & Model

Supply only street light MCPCP for LED fitting 90 watt as per existing Make & Model

Supply only flood light MCPCP for LED fitting 120 watt as per existing Make & Model

Supply only PVC electric cable with insulated aluminium conductor (stranded) with inner sheathing of PVC tape and overall PVC sheathed 1100 volts grade, heavy duty, 16 sqmm twin core, weather proof flat with accessories, complete all as specified and directed.

All as per above but of size 10 Sqmm two core.

All as per above but of size 06 Sqmm two core.

All as per above but of size 04 Sqmm two core.

Supply of lubricating Oil filter element with seal

Supply of Fuel filter element with seal

Supply of Air filter element

Supply of 'V' belt make Funnder/good year (4PK-1158 EPDM Poly 'V' Belt)

Supply of Hose pipe, including nut, bolts and clamps

Supply of Oil bypass filter element with seal

Supply of lubricating oil, grade 15W40 (K-oil premium)

Supply of inhibitor non corrosive coolant including mixed with distilled water as recommended ratio.

Supply of lubricating Oil filter element with seal

Supply of Fuel filter element with seal

Supply of Air filter element

Supply of poly 'V' belt make Funnder/good year for 3H3025 Model, part No 4H 1493.01.0.00 in user manual of Kirloskar

Supply of 'V' belt make Funner/good year A-55

Supply of Hose pipe, including nut, bolts and clamps

Supply of Oil bypass filter element with seal

Supply of lubricating oil,cgrade 15W40 (K-oil premium)

Supply of inhibitor non corrosive coolant including mixed with distilled water as recommended ratio.

M&L for cleaning away all grass, vegetation, saplings, shrubs, undergrowth, roots and trees up to 50 cm girth from the area surrounding of E/M installations, under HT&LT over head lines, 4/2 pole structures, transforemer, installations, yards, surrounding valve chamers and removing the rubbish upto a distance 50 mtr outside the periphery of the area under clearance and dressing the area etc complete all as specified and directed.

M&L for cutting of tree branches of any sizes and dia, not less than 2 Mtr around the LT/HT OH line which obstructing the power supply/ maintenance of electric supply as well as illumination in area including repair of damage broken ACSR conductor, GI wire and jumpers and disposed exc 50 mtr away clearing area and testing of line, complete all as specified and directed. Note : (i) Span length is aproximate 40 to 50m.

Taking down defective 25/36/40/45/60 Watt LED light fitting/SV/MH fittings, street light fitting mounted on pole/bldg on bracket disconnecting, testing all components, dismantling of defective components such as choke, igniters, holders, capacitors, and providing PVC cable for wiring lamps, including cleaning of cover, connection with supply and testing the street light fitting after fixing new components and including trimming of branch if obstacle for lights to illuminate the area and then mounting to its original position and making the fitting functional all as specified and directed.

Supply only Insulation electric tape roll 20 mm 25 mtr long complete.

Disconnecting carefully old unserviceable Ammeter from panel board and Supply & Fix of new 96 mm size square digital type ammeter of range 0-100 Ampere with set of CTs of suitable rating complete all as specified and directed.

Disconnecting carefully old unserviceable Voltmeter from panel board and Supply & Fix of new 96 mm size square digital type Voltmeter of range 0-500 Volt complete all as specified and directed.

S&F and testing end termination jointing kit suitable for 1100V, 70-120 sqmm x 3.5/4 core XLPE cable heat shrinkable joint complete with jointing material & assessories complete all as specified and directed

M&L for painting to indoor/outdoor type LT panel/FP box of size not more than 1.8 m height internally as well as external surfaces complete with one coats of synthetic enameled paint of approved quality including preparation of old surfaces, writing of bus bars & outgoing/incoming locations with white paint gridth upto 2” (50mm) complete all as specified and directed.

M&L for High tension/Low tension cable fault checking by high tension cable fault testing machine complete all as specified and directed

S&F vertical type air break gang operated triple pole, mechanically operated, outdoor type with all fittings, accessories, mounted on and including HT 11 KV porcelain insulators and steel channel frame GI Operating rod 25 mm dia of suitable length worked from ground including locking arrangements, with 7 livers Naval brass lock, suitable for 200 Amps current rating complete. (set of three)

S&F and testing end termination jointing kit suitable for 1100V, 16-50 sqmm x 3.5/4 core XLPE cable heat shrinkable joint complete with jointing material & assessories complete all as specified and directed

S&F cable jointing kit 11 KV (earthed) grade cable for straight through termination (Heat shrinkable) type joint complete with jointing material and all accessories for 3 core XLPE armoured aluminium conductor cable of size 95 to 120 sqmm complete all as specified and directed.

S&F cable jointing kit 11 KV (earthed) grade cable for end termination (Heat shrinkable) type joint complete with jointing material and all accessories for 3 core XLPE armoured aluminium conductor cable of size 95 to 120 sqmm complete all as specified and directed.

M&L for pin insulator porcelain type vitreous white brown including one galvanized mild steel spindle two galvanize iron washers and one galvanized iron nut 100 mm height, 65mm dia for 1100 V grade, complete all as specified and directed.

M&L for shackle type porcelain vitreous white, brown including one galvanized mild steel straps, washers, bolts and nuts 100 mm height, 115 mm dia, section of strap 31 x 5 mm for 1100 V grade, complete all as specified and directed.

Supply only Insulator pin type porcelain vitreous, white brown or green 150mm height and 150mm dia including one galvanized mild steel spindle, two galvanized washers and one galvanized iron nut for conductor working pressure 11000 volt grade, complete all as specified and directed.

Supply only Insulator disc type porcelain vitreous, white, brown or green 145 mm height and 255 mm dia ball and socket type single disk assembly for tension with tension clamp for conductor working pressure 11000 volt grade, complete all as specified and directed.

M&L in repair of Air termination single poined aluminium rod 12mm dia and 300 mm long complete all as specified and as directed

Taking down defective 250/400 Watt LED light fitting/SV/MH light fittings, High mast light fitting through motorised/manual system, mounted on 21 mtr long high mast pole on bracket/round ring, disconnecting, testing all components, dismantling of defective components such as choke, igniters, holders, capacitors, and providing new PVC cable for wiring lamps, including cleaning of cover, connection with supply and testing the street light fitting after fixing new components and then mounting to its original position and making the fitting functional all as specified and directed.

S&F in repair of Earth continuity conductor aluminium strip 25x3mm with saddles and fixing screws etc in wall all complete as specified and directed

S&F in repair of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required GI strip 32x6 mm complete all as specified and directed

Dismentling of ACSR conductor, service feeder or distribution spans complete all as specified and directed

Servicing by means taking out old unserviceable engine oil from oil sump by openeing the drain plug and well cleaning the oil sump, taking out oil filter, bypass filter and diesel filter (primary and secondary) and replacement the same with new as follows for 63 KVA DG Set (Make:Kirloskar) Engine No.4H3445/120542, Machine No.JC/WC/6205/SIL/867K, Alternator No. ES3AO13B165088 at Pump House No. 4 at RTS & Depot Saharanpur including testing and commissioning. Note : (a) Spare parts shall be measured and paid separately under mentioned item of Sch 'A'.

M&L for stringing in replacement of steel wire 4 mm dia 8 SwG as continuous earth wire and grading incl cradal hexagonal binding properly with channel/Angles etc complete all as specified

Servicing by means taking out old unserviceable engine oil from oil sump by openeing the drain plug and well cleaning the oil sump, taking out oil filter,bypass filter and diesel filter (primary and secondary) and replacement the same with new as follows for 30 KVA DG Set (Make:Kirloskar) Engine No.3H3025/1320572, Machine No.JKWL/30/SIL/8363K, Alternator No. 653C013B2506H at Pump House No.2 and at Cl-I hospitalat RTS & Depot Saharanpur including testing and commissioning. Note : Spare parts shall be measured and paid separately under mentioned item of Sch 'A'.

Supply only for Filling/top up of insulation oil confirming IS-335, complete all as specified and directed.

M&L in repair of test terminal block made of gun metal or phosphorus bronze size 75x75x25mm incl 3 nos, 8 mm ida 25mm long hex Head screw complete all as specified and as directed

Supplying, Stringing, Tightening, Fixing & connecting any type of ACSR conductor of any size for over Head LT/HT Line including aluminium binding wire or aluminium tape of suitable type clamps/ connector or other jointing material complete all as specified and directed.

M&L in replacement of unserviceable can type resin filled (Alpx3) capacitors with built-in terminal connectors on top and mounting stud on the bottom heavy duty 440 V Un all as per existing type suitable for APFC panels, 3 phase, 415 V, 50 Hz sysytem of any capacity. :- 25 KVAr

M&L in replacement of unserviceable digital power factor controller 4/6 step type with provision of manual and automatic mode operation conforms to IEC 61010-1, high accuracy, IP 41 terminals with manual and automatic mode ooperation all as per existing type suitable for APFC panels, 3 phase, 415 V, 50 Hz sysytem of any capapcity.

M&L in replacement of unserviceable capacitor switching unit capcitor duty contactor consisting of mounting block and contactors, for switching capacitors, suitable to be installed directly on 3 pole, 9 to 40 A contactors all as per existing type suitable for APFC panels, 3 phase, 415 V, 50 Hz sysytem of any capapcity.

M&L in replacement of unserviceable capacitor switching unit capcitor duty contactor consisting of mounting block and contactors, for switching capacitors, suitable to be installed directly on 3 pole, 50 to 65 A contactors all as per existing type suitable for APFC panels, 3 phase, 415 V, 50 Hz sysytem of any capapcity.