REPAIR TO VARIOUS ARTICLES OF STEEL FURNITURE UNDER GE (W) AGRA

Amount

REPAIR TO ALMIRAH LARGE STEEL WITH SHELVES (FD-67(M)/ 351/ 1031) Removal of old existing unserviceable shutter (Single leaf) of almirah large steel and S&F new shutter made of 1mm thick PBI sheet as per existing shape and size including applying a coat of red oxide primer on both sides and preparation of new steel surfaces complete all as specified and directed.

All as per item No. 01 above but top.

All as per item No. 01 above but bottom.

All as per item No. 01 above but shelf.

All as per item No. 01 above but Cover plate of locks

Removing of unserviceable lock of almirah large and S&F new brass lock 6 levers, Godrej pattern, as per existing size with duplicate keys complete all as specified and directed.

Removing of unserviceable lock assembly and S&F new lock assembly of 10mm dia MS rod as per trade pattern including a coat of red oxide primer and preparation of new steel surfaces complete all as specified and directed.

Removing of unserviceable handle of almirah and S&F new chromium plated steel handle of existing shape and size complete all as specified and directed.

Removing of unserviceable key plate and S&F new chromium plated key plate fixed with screw and nuts of almirah large steel complete all as specified and directed.

Removing of old unserviceable leg of almirah large steel and S&F new leg made out of 1mm thick PBI sheet with gas welding as per existing shape and size including preparation of new steel surfaces and applying a coat of red oxide primer on both side complete all as specified and directed.

M&L for preparation of new/old steel surfaces of almirah large and applying two coats of synthetic enamel paint by spray painting complete all as specified and directed.

REPAIR TO ALMIRAH MEDIUM STEEL WITH SHELVES (FD-67 (M) /350 /1032) Removal of old existing unserviceable shutter (Single leaf) of almirah medium steel and S&F new shutter made of 1mm thick PBI sheet as per existing shape and size including preparation of new steel surfaces and applying a coat of red oxide primer on both sides complete all as specified and directed.

All as per item No. 12 above but top of Almirah medium.

All as per item No. 12 above but bottom of Almirah medium.

All as per item No. 12 above but shelf of Almirah medium.

All as per item No. 12 above but Cover plate of lock of Almirah.

Removing of unserviceable lock of almirah medium and S&F new brass lock 6 levers Godrej pattern as per existing size with duplicate keys complete all as specified and directed.

Removing of old unserviceable lock assembly and S&F new lock assembly of 10mm dia MS rod as per trade pattern including preparation of new steel surfaces and applying a coat of red oxide primer complete all as specified and directed.

Removing of unserviceable handle of almirah and S&F new chromium plated steel handle of existing shape and size complete all as specified and directed.

Removing of unserviceable key plate and S&F new chromium plated key plate fixed with screw and nuts of almirah large steel complete all as specified and directed.

Removing of old unserviceable leg of almirah medium steel and S&F new leg made of 1mm thick PBI sheet with gas welding as per existing shape and size including preparation of new steel surfaces and applying a coat of red oxide primer on both side complete all as specified and directed.

M&L for preparation of new/old steel surfaces of almirah medium and applying two coats of synthetic enamel paint by spray painting complete all as specified and directed.

LOCKER STEEL (FD-257/1029) Removal of old existing unserviceable shutter of steel locker and S&F new shutter made of 1mm thick PBI sheet as per existing shape and size including preparation of new steel surfaces and applying a coat of red oxide primer on both sides and complete all as specified and directed.

All as per item No. 23 above but top of locker steel.

All as per item No. 23 above but bottom of locker steel.

All as per item No. 23 above but shelf of locker steel.

S&F in repairs handle 'D' type of existing shape and size for locker steel.

Removing of old unserviceable leg of locker steel and S&F new leg made of 1mm thick PBI sheet with Gas welding as per existing shape and size including preparation of new steel surfaces and applying a coat of red oxide primer on both side complete all as specified and directed.

M&L for preparation of new/old steel surfaces of locker steel and applying two coats of synthetic enamel paint by spray painting complete all as specified and directed.

Removing of old unserviceable hap and stapple and S&F of new chromium plated haps & stapple fixed with rivets to locker steel complete all as directed.

REPAIR TO CHAIR CB STEEL WITHOUT ARMS (FD-75(M)) Removal of old unserviceable seat frame and S&F new seat frame of 1st class hard wood (shisham) duly planned, finished smooth duly polished with high class black polish including weaving with 2mm wide plastic cane half round with Godrej pattern and border with 3mm wide plastic cane superior quality & frame shall be fixed with machine screws of required size complete all as specified, as shown on drawing and directed.

All as per item No. 31 here-in-before but back frame.

M&L for preparation of old painted steel surfaces and applying spray painting to chair CB steel without arms with one coat of synthetic enamel paint complete all as specified and directed.

REPAIR TO CHAIR CB STEEL WITH ARM (FD-75M) Removal of old unserviceable seat frame and S&F new seat frame of 1st class hard wood (shisham) duly planned, finished smooth duly polished with high class black polish including weaving with 2mm wide plastic cane half round with Godrej pattern and border with 3mm wide plastic cane superior quality & frame shall be fixed with machine screws of required size complete all as specified, shown on drawing and directed.

All as per item No. 34 here-in-before but back frame.

Removal of old unserviceable arms of chair CB steel and S&F new arms made out of 1st class hard wood (shisham) duly planned, finished smooth with black high class polish and fixed with steel screws of required size complete all as specified and directed.

M&L for preparation of old painted steel surfaces and applying spray painting to chair CB steel with arms with one coat of synthetic enamel paint complete all as specified and directed.

REPAIR TO CHAIR VERANDAH (FD- 256/ 259/ 359/FD MAP-II/05) S & F in repair Legs with arm rest made with 19mm dia MS conduit 1.5mm thick as per existing shape and size as shown on drawings including applying one coat spray painting with synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F in repair seat frame of 19mm dia MS conduit 1.6mm thick as per existing shape and size as shown on drawings including applying one coat spray painting with synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F in repair back frame of 19mm dia MS conduit 1.6mm thick as per existing shape and size as shown on drawings including applying one coat spray painting with synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking out old unserviceable cane from chair verandah and recanning seat and back with new 4 mm wide half round white plastic cane of superior quality incl painting with two coats of white synthetic nenamel paint and preparation of old surface complete all as specified and directed.

Taking out old unserviceable nylone newar from chair verandah and reweaving seat and back with vergin quality of white nylone newar 50 to 55 mm wide including painting with two coats of white synthetic enamel paint and preparing of old steel surface complete all as specified and directed.

REPAIR TO TABLE OFFICE CLK/ TYPIST STEEL (FD-84 (M) / 1004) Taking down old unserviceable top of table Clk/Typist and S&F new top of 18mm thick pre-laminated particle board exterior grade of one side teak face and other side white balancing including 4mm thick teak wood beading fixed with nails duly french polished all round the top all as specified and directed .

Removing of old unserviceable drawer of table office clk/typist steel and S&F of new drawer made out of 22 gauge MS sheet and applying one coat of spray painting over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

Taking down old unserviceable long rail of table office clk/typist and S&F new long rail with 25 x 25 mm Square tube made out of 16 gauge PBI sheet fixed by gas welding including preparation of new steel surfaces and applying a coat of red oxide primer complete all as specified and directed.

All as per item No. 45 above but short rails.

All as per item No. 45 above but above but stiffener.

All as per item No. 45 above but legs.

M&L for spray painting with two coat of synthetic enamel paint over steel surfaces of table office clk/typist including preparation complete all as specified and directed.

Removal of old unserviceable lock and S&F new lock of 06 levers Godrej pattern with two keys complete all as specified and directed .

REPAIR TO TABLE OFFICE OFFICER STEEL (FD-84 (M) / 1003) Taking down old unserviceable top of table office officer and S&F new top of 18mm thick pre-laminated particle board exterior grade of one side teak face and other side white balancing including 4mm thick teak wood beading fixed with nails duly french polished all round the top all as specified and directed .

Removing of old unserviceable drawer of table office officer steel and S&F of new drawer made out of 22 gauge MS sheet including preparation of new steel surfaces and applying a coat of red oxide primer complete all as specified and directed.

Taking down old u/s long rail of table office officer steel and S&F new long rail with 25 x 25 mm Square tube made out of 16 gauge PBI sheet fixed by gas welding including preparation of new steel surfaces and applying a coat of red oxide primer complete all as specified and directed.

All as per item No. 53 above but short rails.

All as per item No. 53 above but above but stiffener.

All as per item No. 53 above but legs.

M&L for preparation of old/new steel surfaces of table office officer steel and applying spray painting with two coat of synthetic enamel paint complete all as specified and directed.

Removal of old unserviceable lock and S&F new lock of 06 levers Godrej pattern with two keys complete all as specified and directed .

REPAIR TO CHAIR SCHOOL WITH HAND BOARD (FD/E6/MAP/05) Removing of old PVC trough seat & back single piece and S&F new single piece PVC trough seat and back of 4mm thick with 4X10mm ribs running in logitinal and transversal direction moulded integrally with seat of blow plast or equivalent complete all as specified and directed.

Removing of old top openable hand board and S&F top openable hand board of 18mm thick prelaminated particle board of exterier grade confirming to IS-12823 of required shape & size duly fitted to slide on the right frame. The edgs of top shall be finished with 1.5mm thick PVC beeding all around complete all as specified and directed.

Removing of old PVC shoe and S&F hard PVC shoe complete all as specified and directed

M&L preparation of surface of all MS portion of chair school as shown on drawing and applying one coat of approved synthetic enamel paint with approved shade complete all as specified and directed.

BED HARD JCOs (FD/E6/MAP/08) M&L for removing of old/broken ply wood frame existing beds and supply and fix new commercial ply wood 12mm thick BWR type confirming to IS-303 as per existing shape and size as shown on drawing complete all as specified and directed

M&L preparation of surface of all MS portion of bed as shown on drawing and removing dent where required, filling the small holes with putty and applying painting with one coat of approved synthetic enamel paint with approved shade complete all as specified and directed.

Chair Writing (MAP) (FD/E6/MAP/12) Removing of old unserviceable cushion seat from Chair Writing (MAP) and supply & fix new cushion seat as per existing size and shape alongwith approved coloured fabric complete all as specified and as directed.

Taking out old unserviceable cushion back from Chair Writing (MAP) and supply & fixing new cushion back as per existing size and shape alongwith approved coloured fabric complete all as specified and as directed.

Taking out old unsv arms from Chair Writing (MAP) and supply & fixing new arms as per existing size and shape complete all as specified and as directed.

M&L preparation of surface of all MS portion of bed as shown on drawing and removing dent where required filling the small holes with putty and applying painting with one coat of approved synthetic enamel paint with approved shade complete all as specified and directed.

TABLE 3 X 2 WITH DRAWER STEEL (FD-1008) Removing of old broken table top and supply & fixing new table top of suitable size made out of 18mm thick pre-laminated partice board bounded with phenal for Meldihyde synthetic resin exterior grade confirming to IS-12823 and including all around teak wood beading of 4mm X18mm size fixed with fevicol and panel pins and duly given a coat of high glossy french polish and applying one coat of OG synthetic enamel paint on steel frame complete and rest all as per drawing complete all as specified and directed.

Removing old broken drawer from existing tabe 3X2 and providing new steel drawer made out of 1mm thick PBI sheet duly painted with two coates of OG synthetic eneme paint over a cat of red oxide primer as shown on drawing complete and all as specified and directed.

Removing of existing unserviceable lock from the drawer of table and supply & fixing new brass lock with duplicate keys complete all as specified and directed.

GIRENDRA SINGH AND CO

R K SINGH AND CO

M/S J J ENTERPRISES