Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.8 LAccepted-AOC H NO 02 NEAR GOVT BOYS SR SEC SCHOOL 121102 | PALWAL | HARYANA | 121102 | L1 | Accepted-AOC L1 | |
| 2 | L2₹3.5 Cr+₹31,182.17 (0.09%)Rejected-AOC 14 CHAHAR CONSTRUCTION CO ADARSH NAGAR NEAR ROHILLA COMMUNICAION 124103 | JHAJJAR | HARYANA | 124103 | L2 | Rejected-AOC L2 | |
| 3 | L3₹3.6 Cr+₹11.9 L (3.45%)Rejected-AOC H NO 685 NEAR GOVT SR SEC SCHOOL PAKASMA ROHTAK HR 124401 | PAKASMA | ROHTAK | HARYANA | 124401 | L3 | Rejected-AOC L3 | |
| 4 | Not Admitted-Fee/PreQual/Technical H NO 10 WARD NO 3 VIKAS NAGAR BEHAL 127028 BHIWANI | BHIWANI | HARYANA | 127028 | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification | |
| 5 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | Vijay Contractor L3 | Chahar Construction Co L2 | THE TEWATIA CO-OP L & C SOCIETY LTD. L1 |
|---|---|---|---|---|---|---|
| 1.00 | Galvanizes steel chain link both end twisted fence fabric having opening size 7.5x7.5 cm and 3.15 mm dia wire, 2.2 meter height of mesh, with 2.8 meter ht of MS Angle 50x50x5 mm supports fixing at spacing of 3 meter centre to
centre, supports with MS Flat 35x5 mm. Fencing supported with MS Angle 35x35x5 at top and bottom. The M.S Angle supports shall be anchored in cement concrete (1:3:6) blocks 45x45x60 cm additional razor barbed wire fencing shall be provided at the top of mesh, fencing including gate @ Rs 2000/- per meter (N.S.Item) | 801.52 | Mtr. | 1,955 ₹15,66,971.6 | 1,875 ₹15,02,850 | 1,874.41 ₹15,02,377.1 Lowest |
| 2.00 | Supply and jointing of 110 mm 6 Kg/cm2 HDPE pipe (for jointing floater, all filters, PRV etc) | 1,380 | Mtr. | 459 ₹6,33,420 Lowest | 531 ₹7,32,780 | 472.17 ₹6,51,594.6 |
| 3.00 | Providing, lowering, laying, aligning, fixing in position and jointing (with medium bodied cement solvent) at all level/ depths of TypeB, Class-2 (4 Kg/cm2)UPVC pipes for water supplies as per IS code 4985 : 2021 (amended up to date) in trenches in complete including cost of Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per directionof Engineer. Rate includes cost of all specials like bends , tees required during laying of pipe line along required alignment. UPvc Pipe 140 mm dia. | 14,757 | Per Mtr. | 505 ₹74,52,285 | 480 ₹70,83,360 | 479.68 ₹70,78,637.76 Lowest |
| 4.00 | Supplying, erection, testing and commissioning of Solar AC Openwell Submersible Pump Set with three phase
motor having casing of Alloy Steel for the required power capacity, discharge and Head including all PVC insulated polymer sheathed 3 core flat type cablingin conduit, required from solar plant to solar pump through control room (Rates approved minutes of meeting of 6th tender allotment commitee under the chairmanship of Engineer-in-chief cum Administratror MICADA) AC Submersible pump set of power capacity 7.5 HP. | 1 | per | 47,165 ₹47,165 | 63,000 ₹63,000 | 45,060.28 ₹45,060.28 Lowest |
| 5.00 | Supplying, erection, testing and commissioning of Variable Frequency Drive (VFD) complete with all accessories for the required power capacity of solar pump, VFD drive for pump set of power capacity 15 HP. | 6 | Each | 46,325 ₹2,77,950 | 63,000 ₹3,78,000 | 44,258.46 ₹2,65,550.76 Lowest |
| 6.00 | Horizontal directional drilling with micro tunnelling methods, for pipe laying under pucca rasta /road crossing (N.S.Item) | 575 | Mtr. | 765 ₹4,39,875 | 729 ₹4,19,175 Lowest | 729.32 ₹4,19,359 |
| 7.00 | Providing and lowering of HDPE floater to float the submersible open well pump/motor (NS item) | 13 | No. | 2,859 ₹37,167 Lowest | 27,335 ₹3,55,355 | 27,322.68 ₹3,55,194.84 |
| 8.00 | Supply Installation testing commissioning of Solar Photovoltaic Stand alone Plant conforming to MNRE specifications as amended, consisting of Mono Crystalline silicon solar cells, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength, anti-theft screws. Including lightning and surge voltage protection, Fixing of Array junction box and Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required, built in metering system to monitor plant performance (Amp-meter, Volt-meter, Frequency meter, Energy meter, Wattmeter, and other instrument/equipment as required) Note:- PV modules used must qualify to the latest edition of IEC PVmodule qualification test or equivalent BIS standards Mono Crystalline Silicon Solar Cell Modules IEC 61215/IS14286. In addition, the modules must conform to IEC 61730 Part-1- requirements for construction and Part 2 – requirements for testing, for safety qualification or equivalent IS and be mounted on fixed Aluminium/GI structure of adequate strength and design as per IEC/IS specification. Including field-based electroluminescence (EL) study be performed after receiving the modules at site and after installation. Module mounting structure (MMS) including suitable foundation, design and drawing shall be duly vetted from government institute Including third party inspection. | 187.25 | kwp | 35,515 ₹66,50,183.75 | 34,172 ₹63,98,707 | 34,155.98 ₹63,95,707.26 Lowest |
| 9.00 | Providing and fixing 12 Watt LED Street Lighting of 75 watt solar panel, 12.8 volt 30 Ah Lithium Ferro Phosphate battery, 12 Watt White LED Luminaire and Pole of 5 Meter above ground level with dusk to dawn operation {first 4 hours full light Systemding, fixing and testing of Solar light including battery: min. 24 lux) , rest of the time at lower light (50% Min. 12 lux) level} and 3 days or minimum 36 operating hours autonomy or as per direction of engineer-in-charge | 53 | No. | 13,735 ₹7,27,955 | 13,127 ₹6,95,731 | 13,120.85 ₹6,95,405.05 Lowest |
| 10.00 | Providing, fixing, testing and commissioning of pressure gauge 2” dial with Glycerin filled (NS Item) | 32 | No. | 1,015 ₹32,480 | 968 ₹30,976 | 967.64 ₹30,964.48 Lowest |
Tender Value
₹3.3 Cr
EMD Value
₹6.6 L
Closing Date
23 Jul 2025, 5:00 pmClosed
KULJEET
MICAD Divsion Faridabad
Pond is overflow and water will be used to irrigate the fields throungh sprinkler irrigation Pond is overflow and water will be used to irrigate the fields. Pond is overflow and water will be used to irrigate the fields. Village pond is overflow a
2025_HBC_458751_1
2025111E78DA 34FB 4DBA 8C2D 3B3E1FD6ABC31959CAD
Open Tender
Civil Works
Works
240 days
UTTAWAR LALPUR QUADIM MARROLI Nainangla RAJOUL
2 documents required · 2 mandatory
₹15,000
₹6.6 L
Yes
MICADA Division, Faridabad
6 Sept 2025
16 Jul 2025
24 Jul 2025
16 Jul 2025
23 Jul 2025
16 Jul 2025
21 Jul 2025
Amount
Galvanizes steel chain link both end twisted fence fabric having opening size 7.5x7.5 cm and 3.15 mm dia wire, 2.2 meter height of mesh, with 2.8 meter ht of MS Angle 50x50x5 mm supports fixing at spacing of 3 meter centre to centre, supports with MS Flat 35x5 mm. Fencing supported with MS Angle 35x35x5 at top and bottom. The M.S Angle supports shall be anchored in cement concrete (1:3:6) blocks 45x45x60 cm additional razor barbed wire fencing shall be provided at the top of mesh, fencing including gate @ Rs 2000/- per meter (N.S.Item)
Supply and jointing of 110 mm 6 Kg/cm2 HDPE pipe (for jointing floater, all filters, PRV etc)
Providing, lowering, laying, aligning, fixing in position and jointing (with medium bodied cement solvent) at all level/ depths of TypeB, Class-2 (4 Kg/cm2)UPVC pipes for water supplies as per IS code 4985 : 2021 (amended up to date) in trenches in complete including cost of Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per directionof Engineer. Rate includes cost of all specials like bends , tees required during laying of pipe line along required alignment. UPvc Pipe 140 mm dia.
Supplying, erection, testing and commissioning of Solar AC Openwell Submersible Pump Set with three phase motor having casing of Alloy Steel for the required power capacity, discharge and Head including all PVC insulated polymer sheathed 3 core flat type cablingin conduit, required from solar plant to solar pump through control room (Rates approved minutes of meeting of 6th tender allotment commitee under the chairmanship of Engineer-in-chief cum Administratror MICADA) AC Submersible pump set of power capacity 7.5 HP.
Supplying, erection, testing and commissioning of Variable Frequency Drive (VFD) complete with all accessories for the required power capacity of solar pump, VFD drive for pump set of power capacity 15 HP.
Horizontal directional drilling with micro tunnelling methods, for pipe laying under pucca rasta /road crossing (N.S.Item)
Providing and lowering of HDPE floater to float the submersible open well pump/motor (NS item)
Supply Installation testing commissioning of Solar Photovoltaic Stand alone Plant conforming to MNRE specifications as amended, consisting of Mono Crystalline silicon solar cells, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength, anti-theft screws. Including lightning and surge voltage protection, Fixing of Array junction box and Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other accessories etc. as required, built in metering system to monitor plant performance (Amp-meter, Volt-meter, Frequency meter, Energy meter, Wattmeter, and other instrument/equipment as required) Note:- PV modules used must qualify to the latest edition of IEC PVmodule qualification test or equivalent BIS standards Mono Crystalline Silicon Solar Cell Modules IEC 61215/IS14286. In addition, the modules must conform to IEC 61730 Part-1- requirements for construction and Part 2 – requirements for testing, for safety qualification or equivalent IS and be mounted on fixed Aluminium/GI structure of adequate strength and design as per IEC/IS specification. Including field-based electroluminescence (EL) study be performed after receiving the modules at site and after installation. Module mounting structure (MMS) including suitable foundation, design and drawing shall be duly vetted from government institute Including third party inspection.
Providing and fixing 12 Watt LED Street Lighting of 75 watt solar panel, 12.8 volt 30 Ah Lithium Ferro Phosphate battery, 12 Watt White LED Luminaire and Pole of 5 Meter above ground level with dusk to dawn operation {first 4 hours full light Systemding, fixing and testing of Solar light including battery: min. 24 lux) , rest of the time at lower light (50% Min. 12 lux) level} and 3 days or minimum 36 operating hours autonomy or as per direction of engineer-in-charge
Providing, fixing, testing and commissioning of pressure gauge 2” dial with Glycerin filled (NS Item)
Complete operation and Maintenance and watch and ward of the project for one year including operation of pump, pipe line, accessories, electromechanical, solar plants complet in all respect of pump house, pipe line and accessories, electromechanical, solar plant etc complete in all respect for one year
Construction of 6`x6` regulation hut constructed with 9` thick brick masonary inner side covered with 1.25 mm thick class-1 GI corrugated sheets (with 750 gm Zinc coating per sqm on its both sides) provided with proper door and windows as per approved design and drawing inner size 6`x6` Av. Height 8` covered with Precoated G.I. Corrugated sheet ( Non Scheduled item )
Providing and fixing Tank Type (Make of Metal) Fertilizer and Chemical Injector System confirming to IS 14483 (Part 3) of 2018 for demonstration and guiding the farmers regarding fertilization and chemicalisation of system. (rates include ventury with manifold 1.0`=1300 and 60 liter fertilizer tank= 4400 ) rate approved by worthy Administrator, MICADA, Haryana
Hydrant assembly for nakka in field, rates including Tee, Riser Pipe, butterfly valve, flange and labour for fixing butter fly valve should be as per IS 13095-2020
Providing fixing of Header Assembly/Manifold 3` to connenct the filtration unit (loose) (Rate app. By worthy Administrator)
Providing fixing of Header Assembly/Manifold 3` to connenct the filtration unit (loose)
Supplying, laying, aligning and fixing in position and jointing (with medium bodied cement solvent) of type B, class-3 (6 kg/cm2) UPVC Pipes for water supplies as per as per IS code 4985 : 2021 (amended up to date) in trenches in complete including cost of Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Rate includes cost of all specials like bends , tees required during laying of pipe line along required alignment. i) 140mm uPVC Pipes = 777.35
Supply, installation, Testing and Commissioning of VFD Drive for Pumps (7.5 HP )
Supply, installation, Testing and Commissioning of VFD Drive for Pumps (10 HP)
Supply, installation, Testing and Commissioning of VFD Drive for Pumps (15 HP)
Supply, installation, Testing and Commissioning of VFD Drive for Pumps (20 hp)
Complete operation and Maintenance and watch and ward of the project for one year including operation of pump, pipe line, accessories, electromechanical, solar plants complet in all respect of pump house, pipe line and accessories, electromechanical, solar plant etc complete in all respect for per month upto one year
Supplying, erection, testing and commissioning of Solar AC Openwell Submersible Pump Set with three phase motor having casing of Alloy Steel for the required power capacity, discharge and Head including all PVC insulated polymer sheathed 3 core flat type cablingin conduit, required from solar plant to solar pump through control room (Rates approved minutes of meeting of 6th tender allotment commitee under the chairmanship of Engineer-in-chief cum Administratror MICADA) AC Submersible pump set of power capacity 12.5 HP.
Supplying, erection, testing and commissioning of Solar AC Openwell Submersible Pump Set with three phase motor having casing of Alloy Steel for the required power capacity, discharge and Head including all PVC insulated polymer sheathed 3 core flat type cablingin conduit, required from solar plant to solar pump through control room (Rates approved minutes of meeting of 6th tender allotment commitee under the chairmanship of Engineer-in-chief cum Administratror MICADA) AC Submersible pump set of power capacity 15 HP.
Supplying, erection, testing and commissioning of Solar AC Openwell Submersible Pump Set with three phase motor having casing of Alloy Steel for the required power capacity, discharge and Head including all PVC insulated polymer sheathed 3 core flat type cablingin conduit, required from solar plant to solar pump through control room (Rates approved minutes of meeting of 6th tender allotment commitee under the chairmanship of Engineer-in-chief cum Administratror MICADA) AC Submersible pump set of power capacity 20 HP.
Providing, lowering, laying, aligning, fixing in position and jointing (with medium bodied cement solvent) at all level/ depths of TypeB, Class-2 (4 Kg/cm2)UPVC pipes for water supplies as per IS code 4985 : 2021 (amended up to date) in trenches in complete including cost of Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per directionof Engineer. Rate includes cost of all specials like bends , tees required during laying of pipe line along required alignment. UPvc Pipe 110 mm dia.
Providing, lowering, laying, aligning, fixing in position and jointing (with medium bodied cement solvent) at all level/ depths of TypeB, Class-2 (4 Kg/cm2)UPVC pipes for water supplies as per IS code 4985 : 2021 (amended up to date) in trenches in complete including cost of Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per directionof Engineer. Rate includes cost of all specials like bends , tees required during laying of pipe line along required alignment. UPvc Pipe 160 mm dia.
Supplying, erection, testing and commissioning of Solar AC Openwell Submersible Pump Set with three phase motor having casing of Alloy Steel for the required power capacity, discharge and Head including all PVC insulated polymer sheathed 3 core flat type cabling in conduit, required from solar plant to solar pump through control room( Rates approved minutes of meeting of 6th tender allotment committee under the chairmanship of Engineer-in-chief cum Administrator MICADA) AC Submersible pump set of power capacity 10 HP.
Supplying, erection, testing and commissioning of Variable Frequency Drive (VFD) complete with all accessories for the required power capacity of solar pump, VFD drive for pump set of power capacity 10 HP.
Supply, Laying, Aligning, Fixing in position and Jointing (with medium bodied cement solvent) of Type-B, Class-3 (6 Kg/cm2)UPVC pipes 160 mm for water supplies as per IS code 4985 : 2021 (amended up to date) in trenches in complete including cost of Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Rate includes cost of all specials like bends , tees required during laying of pipe line along required alignment.
Bidder Name
Amount
Vijay Contractor (GSTN-06ALQPK4034L1ZQ) BID ID -1302548
Chahar Construction Co (GSTN-06AAMFC2979A1ZI) BID ID -1302533
THE TEWATIA CO-OP L & C SOCIETY LTD. (GSTN-NA) BID ID -1302516
Chahar Construction Co (BID ID -1302533)
Vijay Contractor (BID ID -1302548)
Chahar Construction Co (BID ID -1302533)
Vijay Contractor (BID ID -1302548)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
BOQ.xls
BOQ • 0.37 MB
Tenderdocument.pdf
Tender Documents • 0.92 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .