Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹54.5 LAccepted-AOC | ₹54.5 L | L1 | Accepted-AOC First lowest bidders |
| 2 | L2₹54.5 LRejected-Finance | ₹54.5 L | L2 | Rejected-Finance Disqualified |
| 3 | L2₹54.5 LRejected-Finance AT BHUSLAD PO DEDGAON BLOCK BANGAMUNDA PS SINDHEKELA DIST BOLANGIR PIN 7670354 ODISHA | 7670354 | ₹54.5 L | L2 | Rejected-Finance Disqualified |
| 4 | L2₹54.5 LRejected-Finance AT BHUSLAD PO DEDGAON BLOCK BANGAMUNDA PS SINDHEKELA DIST BOLANGIR PIN 7670354 ODISHA | 7670354 | ₹54.5 L | L2 | Rejected-Finance Disqualified |
| 5 | L2₹54.5 LRejected-Finance | ₹54.5 L | L2 | Rejected-Finance Disqualified |
Updated dates
Tender Value
₹64.1 L
EMD Value
₹64,148
Closing Date
19 Jan 2026, 5:00 pmClosed
Superintending Engineer
O/O Superintending Engineer Kalahandi R and B Division Bhawanipatna
Building
2025_EICCL_123969_2
BC KLD-09/2025-26
Open Tender
Civil Works - Buildings
180 days
Bhawanipatna Kalahandi
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,000
₹64,148
Yes
7 Apr 2026
30 Dec 2025
20 Jan 2026
30 Dec 2025
19 Jan 2026
30 Dec 2025
30 Dec 2025 - 14 Jan 2026
Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lifts with sundries & T&P required for the work complete including cost of all labour,labour cess,T&P,sundries etc. as directed by the Engineer in charge.
Sand filling in F&P with well watered and rammed inculding cost of sand etc complete.
Cement concrete (1:3:6) using 40mm size CBHG metal including cost conveyence etc complete.
Fly ash brick masonry in cement mortar (1:6) using 23 Cm. x 11 Cm. x 8 Cm. size fly ash bricks having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 %.
Fly ash Brick masonary with C.M(1:6) using 23x11x8cm size bricks including all cost conveyance, taxes,watering, curring & royality etc. complete.
Ground Floor
First Floor
RCC work in M20 Using 20mm CB BHG chips including all cost, conveyance, taxes, royalties, watering & curing and labour with T&P as required for the work etc complete.
Ground floor (a) Footing
b) Plinth Beam
c) Lintel
d) Column
e) Chajja
f) Roof Beam
j) Slab
First Floor (a) Lintel
b) Column
c) Chajja
d) Roof Beam
e) slab
f)staicase
Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specifications in.
Ground floor
First Floor
Supplying & fixing of MS door / window Grill with all labour, iron fittings fitted and fixed complete, in all respect including cost of iron etc complete.
Removing old lime or cement plaster from walls including racking out joints 12mm deep and removing the debris within 50m lead
Ground floor
12mm th. Cement plaster [1:6] over brick /stone masonary including watering curring cost conveyance taxes and royality etc. complete.
Ground floor
First Floor
16mm thick Cement Plaster (1:6) over Brick Masonry finished smooth including watering curring cost conveyance taxes and royality etc. complete.
Ground floor
First Floor
Finishing wall putty to plaster surface with any approved shade including cost, conveyance, taxes of all material and labour with T&P etc complete.
Ground floor
First Floor
Wall Painting two coats with approved Plastic Emulsion Paint over a coat of Water Bound Wall cement Primer on Plastered Surfacein Ground Floor
Ground floor
First Floor
Painting two coats with any approved enamel paint over a coat of wall primer including cost, conveyance, taxes of all material and labour with T&P etc complete.
Ground floor
First Floor
Painting two coats with any approved colour of weather seal coat over a coat of Water Bound Wall cement Primer to out side surface of wall.
Ground floor
First Floor
R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying in Floor
Ground floor
Supplying, fitting & fixing of Vitrified colour printed series tiles in floors of size 600mmx 600mm of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge (for New Work only )
Ground floor
First Floor
Supplying, fitting & fixing of Vitrified colour printed series tiles of size 600mmx 600mm of approved make confirming to IS:13755 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge
Ground floor
First Floor
Supplying, fitting & fixing of Granite Tiles of minimum 16mm thick and above 0.10 sqm of approved make in floors over 25mm thick bed of cement mortar 1:1 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect
Ground floor
Supplying, fitting & fixing of Granite Tiles of minimum 16mm thick and above 0.10 sqm of approved make in dadoes, skirting and risers of nsteps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge
Ground floor
6mm th. Plaster to RCC surface including watering curring cost conveyance taxes and royality etc. complete.
Ground floor
First Floor
Filling foundation and plinth with excavated earth
Providing and fixing factory made UPVC two track sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of
Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 mtrs C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc with coist, conveyance, taxes of all materials, labour and T&P required for the work all complete in all respect
First Floor
Supplying, fitting & fixing of granite tile above 0.40 sqm. in floor (20mm thick) laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge.
Providing and fixing of Aluminium Composite Pannel glazing fixed to wall surface of approved make and quality with ACP 3mm thick to the exterior grade, the sizes of outer Aluminium square frame as 100 x 44mm, inner Aluminium square frame of 50 x 63mm, accessoriessuch as stainless steel screw, VHP tape, 789 grade Silicon, coir etc complete including cost, conveyance, taxesof all materials, labour, transportation charges, centering, shuttering charges etc as per specification and direction of theEngineer-in-charge. The sections are to be cut to length, meter joinedwith corner bracket and frame are fixed to the concrete/masonry walls by means of self expanding screws.
Cost of Iron Square Pipe for Pillar, Truss & Purlins including all cost , taxes etc.
Supplying and fixing G.C.I sheeet on roof drilling hole in wind ties including fixing of ridges valley wind ties etc excluding cost of fittings per 1 sqm.
Providing fitting fixing of false ceiling with Aluminium anodised T section No.3215 with 2'0" center to center, L section No.1705 on 4 walls to be fixed by means of steel screw and P.V.C. plug and the Aluminium grid 2'0"x2'0" with Gypsum board suspended from ceiling including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge
E.I-Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/BEC or equievalant reputed make ISI marked as approved with 6A modular type ( (anti bactorial & falme retradant type)) switch ISI marked Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Europa) or equievalant reputed make ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Europa)or equievalant reputed make ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital. All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
a)Group-A
b) Group-B
Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( (anti bactorial & falme retradant type) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make Schneider(Zencelo)/legrand( Arteor) /Panasonic (Europa), complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 10 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & falme retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Schneider(Zencelo)/legrand( myrius) /Panasonic (Europa) or equievalant reputed make ISI marked as approved, complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
Supplying,fixing of 1x16A+1X 6A Plug on the separate board with complete fitting by 02 no of 16A switch & socket(modular type) ( (anti bactorial & falme retradant type) with suitable size modular box & metallic cover plate (both side) (anti bactorial & falme retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Schneider(Zencelo)/legrand( myrius) /Panasonic (Europa) or equievalant reputed make ISI marked as approved, (For equipement power)complete suitable for IPH standard hospital.(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
Wiring to Circuit/ Sub-main along with earth wire with following size of FR PVC S.C.Cu. Wire (Make of wire Finolex/ Anchor/ Havels/HPL/L&T/ V.Guard.
1x1.5mm2 Sub-Main Wiring for Invertor connectiom.
a) (1.8.1) 2X1.5mm2 + 1x1.5mm2
b) (1.8.2) 2X2.5mm2 + 1x1.5mm2
c) (1.8.3) 2X4mm2 + 1x1.5mm2 f
e) (1.8.4) 2X6mm2 + 1x2.5mm2
e) (1.8.5) 2X10mm2 + 1x4mm2
S/F of step type Antibacterial electronic fan regulator of panasonic/havells/legrand/ L&T equivalent make
Supply and fixing of 1200 MM BLDC(28 watt,ISI mark with Alumunium Blade with 4 years warranty with PCB)ceiling fan with connections wire and all accessories including hanging and connections(MAKE-USHA,TECHNIX CROMPTON Groove ,HAVELLS Efficencia Neo)
S/F of 18wt LED T.L fitting of Phillips/ Bajaj/Havels make
S/F of 10wt LED Bulb of Havels/HPL/Bajaj make.
S/F of Modular Angle Holder.
S/F of 32Amp/25AC starter switch Havells/legrand /or equivalent make.
S/F of 230mm Exhaust Fan of model Usha Aero clean plus / Equivalent make of approved brand as per direction of engineer in charge
S/F. of 12 Way double door D.Box with 1x 32Amp DP of 'C' series + 10 x(16 -10)A.SP MCB'B' as per direction of engineer in charge( DB & MCB of make Schnider/Hager/Legrand/L&T) for different section wiring
S/F of (4+12) way double door TPN distribution Box for single phase out going incoming- 63Amp TPN MCB of havells make, outgoing- 12 x (6-32)A SP MCB as per direction of engineer in charge( DB & MCB of make Schnider/Hager/Legrand/L&T) for light load.
S/F 4 x 16 mm2 PVC Al Armoured Cable Of ISI Marked (Polycab/Nicco/Havels)For Light DB
S/F 3 1/2 x 25 mm2 PVC Al Armoured Cable Of ISI Marked (Polycab/Nicco/Havels) For Power DB & AC DB
S/F 3 1/2 core x 70 mm2 PVC Al Armoured Cable Of ISI Marked (Polycab/Nicco/Havels) From inter panel connection
Laying of cable on wall surface by clamping.
Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH/LSZH PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed make ISI marked as approved with 20 mm dia PVC flexible non metallic conduit FRLS type ISI marked Make-AKG/Anchor/BEC or equievalant reputed make ISI marked as approved with 6A modular type ( (anti bactorial & falme retradant type)) switch ISI marked Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Europa) or equievalant reputed make ISI marked as approved, and ceiling rose ISI marked Make- Anchor/Havells of modular type G.I box with metallic cover plate (both side) (anti bactorial & falme retradant type) Make-Schneider(Zencelo)/legrand( myrius) /Panasonic (Europa)or equievalant reputed make ISI marked as approved of suitable size, modular box with 1.5 sq. Mm FRLSH PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. CATAGORY AS FOLLOWS ,complete suitable for IPH standard hospital. All the switches & sockets should be warrantied for a replacement period of 10 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
a)Group-A
b) Group-B
c) Group-C
S/F of 230mm Exhaust Fan of model Usha Aero clean plus / Equivalent make of approved brand as per direction of engineer in charge
S/F of step type electronic fan regulator of panasonic/havells/legrand/ L&T equivalent make
Supply and fixing of 1200 MM BLDC(28 watt,ISI mark with Alumunium Blade with 4 years warranty with PCB)ceiling fan with connections wire and all accessories including hanging and connections(MAKE-USHA,TECHNIX CROMPTON Groove ,HAVELLS Efficencia Neo)
S/F of 18wt LED T.L fitting of Phillips/ Bajaj/Havels make
15 wt ceiling light
S/F 3 1/2 x 25 mm2 PVC Al Armoured Cable Of ISI Marked (Polycab/Nicco/Havels) For Main control room to Floor DG DB
S/F 3 1/2 core x 50 mm2 PVC Al Armoured Cable Of ISI Marked (Polycab/Nicco/Havels) From main control floor power DB ( each having 3 set x 2 run)
S/F 3 1/2 core x 70 mm2 PVC Al Armoured Cable Of ISI Marked (Polycab/Nicco/Havels) From main control floor power DB ( each having 3 set x 2 run)
Laying of cable on wall surface by clamping.
S/F. of 12 Way double door D.Box with 1x 32Amp DP of 'C' series + 10 x(16 -10)A.SP MCB'B' as per direction of engineer in charge( DB & MCB of make Schnider/Hager/Legrand/L&T) for different section wiring
S/F of (4+12) way double door TPN distribution Box for single phase out going incoming- 63Amp TPN MCB of havells make, outgoing- 12 x (6-32)A SP MCB as per direction of engineer in charge( DB & MCB of make Schnider/Hager/Legrand/L&T) for light load.
4K UHD Smart LED TV 43inch with wall mounting system for Waiting hall, Conference hall Make: LG / Samsung / Sony
PT Camera with 10x Optical & 16x Digital Zoom / FHD@30fps / Connectors - USB2.0/ 1xRS232 In: 8pin Min DIN, Max Distance: 30mtr
Cutting-edge conferencing system boasting a 360 degree 4-mic array, 92dB speaker, noise reduction, versatile connectivity, and extended battery life.
Extension microphone for Quadro / QuadroP
Cost for Cables and Links for commissioning of system
Cost for Installation Commissioning Fixing of All above complete with all connection with technician charges.
Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc with charcoal and salt as required.
Supplying and laying 25 mm x 5 mm G.I earth strip ISI marked on surface or in recess for connection etc as required as per the direction of Engineer in Charge.
Supplying and laying 25 mm x 6 mm G.I earth strip ISI marked at 0.5 meter below ground level as strip earth electrode including soldering etc. as required as per the direction of Engineer in Charge.
Providing and fixing 8 SWG CU wire on surface or in recess for loop earthing as required.
Fabrication of 100A panel board of size 990mmx 1100mm x 320mm with powder coat made out of 18 SWG CR sheet with Incoming: 100Amp MCCB four pole 25KA breaking capacity -1No,150A, 25mm x 4.5mm copper Busbar-1no, Outgoing: 63Amp MCCB four pole 16KA breaking capacity -3No, 40Amp DP MCB -2No,Volt meter,Ammeter CT coil,RYB indicator,Transporation and fixing charges etc. (Main Incomer Panel Board) Protecective device(MCCB,Changeover switch) should have make of (L&T/Hager/Schnider/legrand) for Office Building
S/F of Copper 5 Star Rated 1.5 Ton Split type AC.Machine make of Voltas /LG/BlueStar/Carrier etc of ISI make.
Installation charges of 1.5 ton AC.machine.
S/F of 4KVA Voltage stabiliser having digital display ,intial time delay system i.e certified with ISO 9001:2008 with working range of (90-300)V of make V.guard/Autotake
S/F of Extra long copper pipe for indoor unit to out door unit.( As per Outdoor Unit Location)
S/F of M.S. bracket & stand for fixing of indoor & outdoor Unit of 1.5Ton Split type A.C. Machine.
Supply and installation of Rubber Mats 12mm thick of size 2000mm x 1000mm x 12 mm thick Electrical tested with test certificate.
Supply and fixing of fire buckets with angular fabricated stand to fix 4 buckets in each stand for Electrical fire protection as per standards of Electrical Inspectorate.
Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room.
S/F of 90wt LED Street light of Havels/HPL/Bajaj make Including GI Bend pipe.
Supply and Fixing of GI bend pipe for street light including all accessories i.e clamp or jam lock etc
Supply of Elegant look 100 W AIO LED Solar Street lights having extruded alluminium housing, 200Wp or more Mono Crystalline Panel/Laminates fixed on the top of the luminaire housing, maintenance free 12.8 volts 96 Ah or more LiFePO4 battery(BIS certified) , BMS, MPPT charge controller having efficiency >92% as per EN50530 , PIR sensor to provide 2 days (24 hrs ) back up . The luminaire is having IP 65 protection for critical components, IK 07 and having lumen output of > 15000 lumen as LM 79 report of third party NABL lab . Lenses should be provided on the LED chip for better lighting dstribution to avoid glare on human eyes. Both the luminaire and Mono Crystalline Panel must be manufactured in India. The Solar lighting company must submit the third party NABL lab reports to justify the lumen efficacy,luminaire output , IK 08 and IP 65 protection ( In house NABL lab reports will not be acceptable). The Luminaire should be supplied along with adjustable type mounting bracket with it's additional support to fix the light strongly to withstand wind speed of 180 KM/HR or more.The AIO solar lights must be designed to withstand 180 KM /Hr Wind speed and wind speed report of any wattage AIO solar light with 180 WP or more Solar panel should justify the same. The Solar lighting companies must be having inhouse NABL lab and having registered office in Odisha & Toll free base After sales service set up within 100 -150 KM from the project site .The Solar lighting manufacturer must submit the declaration letter by mentioning that complete solar light and the solar panel are manufactured in India ( Made in China product are not acceptable) and warranty certificate on their company's letterhead by mentioning warranty period as 5 years & Tollfree Number & whatsapp number for registering the complaint to get the after sales service within warranty period The following test reports of third party NABL lab shall be submitted for the technical evaluation of product 1. LM 79 REPORT (Third party NABL lab only) , 2. IK 08 ( Report of Third party NABL lab ) ,3. IP 65 (Report of Third party NABL lab), 4. Wind speed report of AIO solar light with 200 Wp Module suitable for 180 Km/Hr wind speed The AIO Solar Street light must complies to the following standards and necessary test reports of any wattage of solar lights must be submitted prior to start of the work/TDS approval 1. EN50530 – MPPT Efficiency , 2.. IEC61547 , 3. IEC61000-3-2 – EMC , 4. IEC 60598-2-3 ,5. IEC 62109-1 Make : Philips/Panasonic/Wipro only
Supply of 9 mtr long hot dip galvanized Octagonal pole having base dia of 155 mm and top dia of 70 mm and plate thick ness of 4 mm or more complete with base plate and 4 nos. Jtype En 8 grade foundation bolts to withstand wind speed considering the weight & dimension of Solar light fixed on the top of the pole . Make : Bajaj/ Valmount/ Vakrangi/ Utkarsh only
Construction of RCC foundation by using M20 grade RCC and Fe 415 grade reinforcement in the foundation by considering the SBC as 10 T per sq mtr and fixing the 4 nos. fdn bolts in that foundation for installation of pole with Solar light on that foundation. The work shall be excuted as per the direction of EIC.
Installation of 9 mtr pole on the foundation/Adopter bracket by using suitable machinery and fixing the 100 W AIO solar street lights on that pole by taking all safety precautions as per the direction of EIC.
Recessed wiring to Light/ Fan/ Call bell and Exhaust fan point with 1.5 mm2 F.R.L.S PVC insulated single core multi strand copper conductor of ISI marked with 50mm dia Non metallic with 20mm dia non metalic PVC flexible conduit with 5/6 250volt Modular type switch,ceilling rose mounted on MS box having front bakelite cover of suitable size M.S box with 1.5mm2 F.R.L.S pvc insuleted S/C multistand copper conductor as earth wire Including all accessories and connection.as per direction of ingineer-in-charge. (Make of wire Finolex/Anchore/ Havels/HPL/L&T/ V.Guard.
a)Group-A
b) Group-B
c) Group-C
Recessed wiring to 5/6A socket outlet with 2x1mm2 PVC Insulatted S.C F.R.L.S multistand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit pipe with Modular type switch.
a) Group-A
b) on existing board
Recessed wiring to power plug point with 2x4mm2 PVC Insulatted S.C F.R.L.S multistand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit along with 1x2.5mm2 F.R.L.S PVC insulated S.C C.U. wire for loop earthing as required.(Make of wire finolex/Anchore/Havels /HPL/V.Guard )
Wiring to Circuit/ Sub-main along with earth wire with following size of F.R.L.S PVC S.C.Cu. Wire (Make of wire Finolex/ Anchor/ Havels/HPL/L&T/ V.Guard.
1x1.5mm2 Sub-Main Wiring for Invertor onnectiom.
a) (1.8.1) 2X1.5mm2 + 1x1.5mm2
b) (1.8.2) 2X2.5mm2 + 1x1.5mm2
c) (1.8.3) 2X4mm2 + 1x1.5mm2
S/F of 15watt LED COB down light complete with lamp of Havels/HPL/Bajaj make.
S/F of 20watt LED Flood light complete of Havells/Bajaj/HPL make.
S/F of Modular type electronic fan regulator of havells/legrand/equivalent make
Supply and fixing of 1200 MM BLDC(28 watt,ISI mark with Alumunium Blade with 4 years warranty with PCB)ceiling fan with connections wire and all accessories including hanging and connections(MAKE-USHA,TECHNIX CROMPTON Groove ,HAVELLS Efficencia Neo)
S/F of 300mm Exhaust Fan of model usha turbo /equivalent make
S/F of 10wt LED Bulb of Havels/HPL/Bajaj make.
S/F of Modular Angle Holder.
S/F of 18wt LED T.L fitting of Phillips/ Bajaj/Havels make
S/F of 63 Amp. 240V. ICDP main switch of seimens/HPL/Havels/Anchor/LT/C&S make
S/F. of 12 Way double door D.Box with 1x 32Amp DP of 'C' series + 10 x(16 -10)A.SP MCB'B' as per direction of engineer in charge( DB & MCB of make Schnider/Hager/Legrand/L&T)
S/F 2 x 10 mm2 PVC Al Armoured Cable Of ISI Marked (Polycab/Nicco/Havels)
Cost for Glow sign Board with ACP background, Electrical connecting accessories as per direction of engineer in charge.
Provision of high class P6 outdoor SMD RGB Module(192 x192) MM Driving Ic-5M/ICN Brand:quangli/Unilumin as per direction of engineer in charge
Provision of Sending card/Processor model A4Brand Huidu as per direction of engineer in charge
Provision of power supply SmPS 60A 5V Brand Rong Elecric as per direction of engineer in charge
Provision of power supply SmPS40A 5V Brand Rong Elecric as per direction of engineer in charge
Provision of QMS backend server software with database as per direction of engineer in charge
Provision of Outdoor MS iron cabinet size 960 x 960 MM make as per direction of engineer in charge
Provision of Monopole as per direction of engineer in charge
Provision of Outdoor Iron structure per direction of engineer in charge
Provision of ACP Board only shed as per direction of engineer in charge
Provision of charges for transportation & wiring as per direction of engineer in charge
Provision of Installation,testing ,power supply with cable,& commissioning charges as per direction of engineer in charge
Provision of Receiving Card Modl No R-512/R508 Brand Huidu as per direction of engineer in charge
P.H-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including foxing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge
20mm dia C-PVC pipe
25mm dia PVC pipe
32mm dia C-PVC pipe
Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal core with supply of all joiniting materials 2 including cost & conveyance of all materials to worksite payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
15mm dia CP angle stop cock (Jaquar CON-CHP-059KN
15mm dia CP two way bib cock (Jaquar CON-041KN
15mm dia CP short body bib cock (Jaquar)CON-CHR-047KN
15mm dia CP long body bib cock (Jaquar Make) CON-107KN
25mm dia brass full way valve (Shakti make)
32mm dia brass full way valve (Shakti make
25mm dia CP Health Faucet (Jaquar Make) ALD-CHR-565
15mm CP Extension piece
125mm CP grating
15mm size C. P. flange
Supplying all materials labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr lengthx0.25 mtr width KB brickwork in cement mortar (1.6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank 12mm thick cement plaster in cement mortar (1.6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1.2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcer ent including centering and shuttering watering curing cost of all materials conveyance of all materials to worksite payment of royalty, all taxes etc all complete as per approved drawing, P.H. specification and direction of Engineer-in-charge
1000 liters capacity pvc water storage tank
supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G1 Pipes and fittings/ PVC pipes and fittings including watering. curing cost & conveyance of all matenals to worksite, payment of royality, taxes etc all complete as per direction of Engineer-in-charge
Supplying all materials labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing PVC pipes and G1 fittings etc, and 5 repairing the holes after insertion of pips etc with cement concrete (1:24) including finishing complete so as to make it
Supplying all materials, labour, TSP and cutting grooves in pucca floors and walls for taking G1/PVC pipes and making good the damages 6 including watering curing cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge
Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches incl ding jointing with supply of approved rubber lubricant by non-heas application method/as per manufacturar's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches, cost & conveyance of all materials to worksite, payment of taxes etc all complete as per P.H specification and direction of the Engineer-in-charge
110mm U-PVC SWR Pipe (Oni Plast/Finolex/Supreme Make Type-B)
110mm U-PVC P Trap(On Plast/Finolex/Supreme Make)
110mm U-PVC door bend(On Plast/Finolex Supreme Make)
110mm U-PVC Plain bend(On Plast/Finolex/Supreme Make)
110mm U-PVC offset without ear(On Plast/Finolex/Supreme Make
110mm U-PVC Cowl (On Plast/Finolex/Supreme Make)
110mm U-PVC S/Jn door(Orn Plast/Finolex/Supreme Make)
110mm U-PVC Plain tee(On Plast/Finolex/Supreme Make)
110mm U-PVC Socket(On Plast/Finolex/Supreme Make)
Supplying all materials, labour, T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply wooden plugs, screws and cement etc all complete as
Supplying all materials, labour T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5 10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge
Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or MS brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia 10 CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the intet pipe with suupply main cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per PH specification and direction of the Engineer-in-charge
10 tr Capacity pvc LL cistern with 32m 1 Dia CP long flush bend Slimline-white-Parryware make)
Supplying all materiais labour, T&P and fixing the following vitreous china Wash Down Water Closet European type WC pan with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing cost & conveyance of all materials to worksite, payment of royality taves etc all complete as per PH specification and direction of the Engineer-in-charge
European water closet with 'p' trap plain (Hindware/Parryware/Neycer make
EWC(Matrox set No: 70002(P-18)
Supplying all materials labour T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedustal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered "Hot and Cold with 'ong screws shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin fixing 32mm dia CP brass waste cost & conveyance of all materials to worksite, payment of taxes etc all complete as perP H specification and direction of the Engineer-in-charge
Under Counter basin(560x450) Hindware-No 10095
Supplying all materials, labour T&P and fixing standard sized CP towel 13 rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.
25mmx600mm long CP towel rail
towel ring
Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge
600mmx125mm plate glass shelf
Supplying all materials, labour. T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or ply wood sheet and fixed to 15 wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge
600mmx450mm size BE mirror
Supplying all materials, labour, TSP and fixing CP soap holder complete 16 with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chaige
CP soap holder
Supplying all matenais labour T&P and constructing Inspection Chamber of inside size 750mmx760mmx460mm with cement concrete (1:36) using 40mm size crusher broken hard black granite metal on bed KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete 112.4) using 12mm size crusher broken ward black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush 17 pointing (1.3) to outside, RCC cover slab (1:24) using 12mm size crusher broken hard black granite chips with R.C.C. man hole cover earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering.curing cost of all materiais, conveyance of all materials to worksite, payment of royalty all taxes etc all complete as per
Inside size 75cmx76cmx46cm with 18 gia RCC MH cover
Supplying all materials, labour, T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precatit cover slab in cement concrete (1:24) mix using 12mm size crusher broken HG chips. foundation concrete (1.4:6) using 40mm size crusher broken HG metal on bed and around trap. KB brick word. in cement mortar (16) In foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap. 150mmX150mm size Cl grating etc all complete as per drawing, specification and direction of Engineer-
Supplying all materials, labour, T&P and providing cement concrele ( 1:2:4) with 12mm size crusher broken hard black granite chips including 19 watering, curing cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
Groung floor
Supplying all materials, labour, T&P and providing and fixing vitrified tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) (1 cement 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering. curing.cost of all materials, conveyance of all materials to work site payment of royalty, all taxes etc all complete as per PWD specification and direction of Engineer-in-charge (ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-
First Floor
Supplying all materials, labour, T&P and providing 12mm thick cement plaster(1:4) on brick work including watering.curing cost of all materials. 21 conveyance of all materials to worksite payment of royalty all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge
First Floor
Supplying all materials, labour, T&P and, roviding and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing cost of all materials, conveyance of all 22 materials to work site, payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge
First Floor
Providing fitting, fixing of Aluminium door with anodized Al door section of 9202 as vertical member, 9201 as top and 9200 as middle bottom 23 member with frame section No. 9221 and tapered clip no. 4880 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour T&P hire charges of drilling machine, labour charges etc complete. Ref OBI10
Supplying all materials, labour. T&P and laying in trenches (to level or slope) unplasticized PVC pipe conforming to IS 4985/2000 of the following out side dia for class 3 (0.6Chipa) including jointing with supply of approved solvent cement by non-heat application method/as 24 per manufacture's specification, provoding and laying in trench cement concrete (1:4.8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge
150mm dia PVC pipe
Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:18) with black granite chips size 46mm brick work with KB. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(16)12mm C.P(18) inside MH chamber over benching with cement slush pointing (1.3)outside the MH chamber providing painting MS or Cl step iron RCC(roof of slab with CC(1:2.4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per
MH size 0.91m x 0.91 m with 0.45 m (18° dia RCC Cover
Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1.6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside in de fill with dry brick khoa size 28 38mm CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling o bed and breaking the clods and the excavated materials with in 50m initial read as per direction of Engineer in charge
Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1" extra lift of 1.50 m over initial laft
Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. Il complete as per direction
Supplying all materials labour. T&P and providing cement concrete ( 1:24) with 12mm size crusher broken har black granite chips including watering, curing, cost of all materials, conv yance of all materials to work site with payment of royalty, all taxes etc all complete as per PW.D specification and direction of Engineer-in-charge
Supplying all materials, labour. T&P and providing cement concrete (1 :1.5:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying watering, curing cost of al materials conveyance of all materials to worksite, payment of royalty, all taxes etc. all complete as per PWD specification and direction of the Engineer in charge
Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting bending binding and tying the grils and placing in position including cost of binding wine 18 to 20 gauge cost of steel, conveyance of all maternals to worksite payment of royalty all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge
Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer-in-charge
RCC floor roof slab chhaja up to 4.430 m height
Supplying all materials labour T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqom with dimensional tolerance+ 8%, in cement mortar (13) including watering, curing cost of all me erials, conveyance of all materiais to worksite payment of royalty all taxes etc all complete as per PWD specification and direction of the Engineer in charge
Supplying all materials labour. T&P and providing 12mm thick cement plaster(1:3) on brick work including wate ing curing cost of all materials conveyance of all materials to worksite payment of royalty all taxes etc all complete as per PWD specificatic and direction of the Engineer-in-charge
Supplying all matenals, labour T&P and providing cement punning including watering, curing cost of all materials, conveyance of all materials to worksite, payment of royalty, el axes etc. all complete as per specification and direction of the Engineer-in-charge
Supplying all materials labour T&P and fiting and fixing 12mm dia MS/CI stap iron including supply of necessary CC(1:24) for fixing etc. complete as per PH specification
Supplying all materials,labour T&P for providing fitting & fixng 100mm X 100mm SW Tea in wall including filling the recess withcement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge.
Supplying all materials Isbor 76P filling sand in foundation and plinth with well watered and rammed clo all complete as per direction of Engineer-in-charga
Please Enable Macros to View BoQ information
stage.html
html • 0.06 MB
techsummary_573717.pdf
BOQ Comparative Chart
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.56 MB
Tendernotice_2.pdf
PDF • 0.83 MB
2AMOhospital.pdf
Tender Documents • 1.54 MB
BOQ_573717.xls
BOQ • 0.44 MB
Download all tender documents and submit your bid