CONSTRUCTION OF TOILET DRINKING WATER FACILITIES RAIN WATER HARVESTING IN 06 NUMBERS OF ANGANWADI CENTRE 15 NUMBERS OF RAIN WATER HARVESTING IN DIFFERENT ANGANWADI CENTRES UNDER BASANTRAI BLOCK OF GODDA DISTRICT.

Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item - A) and disposal of excavated earth as obtained to a distance up to 50M all complete as perbuilding specification and direction of E/I.

Earth work in back filling the trench after laying different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of E/I. (For Classification of Soil Item - A & B)

Supplying tools and making connection of new G.I. distribution branch 15mm to 50mm dia with existing G.I. main by providing and fixing G.I. tee including cutting of pipe at two places and threading their ends, providing long screw and one G.I. nipple all complete as per specification and direction of E/I.

Earth work in excavation in foundation trenches in hard soil (vide classification of soil item - A+B) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.

Earth filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and finally dressed with earth obtained from excavation of foundation trenches with a lead of 50m and lift of 1.5m all complete as per building specification and direction of E/l. (Mode of measurement compacted volume)

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume)

Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing designation 75A brick work in C.M (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth, curring, taxes and royalty all complete as per builiding specification and direction of E/I.

Providing designation 75B brick work in C.M (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth, curring, taxes and royalty all complete as per builiding specification and direction of E/I.

Providiag designation 75A brick work in Cement Mortar (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Providing TMT steel reinforcement as per approved design and drawing excluding carriage of M.S bar to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. 8mm dia bar

Providing TMT steel reinforcement as per approved design and drawing excluding carriage of M.S bar to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I. 10mm dia bar

Supplying, fitting and fixing 20 guage G.C.I. sheet gate fitted on M.S. angle frame of size 60x60x6mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.

Providing 50mm thick Cement Concrete flooring (1:2:4) with 20mm to 6mm size graded stone chips finished with flooring coat of neat cement in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I.

Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l.

Providing 6mm cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.

Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I.

White washing three coats over new surface with approved quality of lime including cost of cleaning surface thoroughly and removing the scales of smoke and mosh marks with jhama rubbing, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/I.

Supplying and filling of brick bats in soak pit all complete job.

Providing and fixing male ended 15mm dia brass bib cock of approved quality (wt. not less than 350 grams) with extra socket all complete as per specification and direction of E/I.

Providing and fixing 15mm dia male ended C.I. push cock (wt. not less than 400 grams) of approved quality with extra socket all complete as per specification and direction of E/I.

Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I. Union Socket, Nipple & Jam Nut : 15mm dia

Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I. Socket : 15mm dia

Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I. Elbow : 15mm dia

Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I. Elbow : 65mm dia

Providing and fixing white vitreous china water closet squatting pan (Indian type) Odisha pattern W.C. pan of size 580mm.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) 75mm dia Single socketed pipes.

Supplying and fitting Polythene water storage tank of mark with cover and suitable locking system in double layer confirming to IS:12701-1996 with latest revision.

Supplying and laying G.I. pipe in excavated area and fitting & fixing in wall from storage tank and rising main and delivering main. 15mm dia

Maufacture, supply and delivery of following nominal dia UPVC column pipes including PVC socket (coupler) 65mm dia - Density of pipe 1.38 to 1.43 GM per CM3, OD 74.5 to 75.2 mm wall thickness. End : 9mm to 10.7mm, Barrel - 9mm to 10.7mm, Length - 3 M Rising main (MJP)

Lowering, laying and jointing H.D.P.E./M.D.P.E. pipes in proper position including all specials by cmression fitting/electro fusion ad butt fusion jointing. 65mm HDPE Pipe

Ready made pre cast ACC Septic Tank of 0.45 M dia, 3 M deep all complete as per specification & direction of E/I.

Carriage of materials by diesel truck including loading at source, unloading at work site and stacking properly, labour etc. all complete as per direction of E/I. Cement

Stone Chips

Steel

Bricks

Goods & Services Tax (G.S.T.) - 18%

Labour Cess - 1%