CIVIL WORKS FOR PROVIDING PAVER TILES, NAME BOARD AND CANOPY FOR ICCC BUILDING IN HAL

Earth work excavation for laying pipes in trenches,retaining walls,columns,etc., depth not exceeding 1.50 m in hard dense soil other than rock including dewatering if required, getting out and stacking the earth including cost of tools, labour, transportation etc,with a lead of upto 1000mts including cost of tools, labour, transportation etc., all as directed by EIC.

Providing and laying plain cement concrete (PCC) 1:3:6 using 20mm down graded hard granite with recycled aggregate for foundation, floor etc., wherever required, at all depths including mixing, placing in position, proper compacting,formwork, curing, cost of all materials, labour, tools, transportation and all other incidental charges, etc., complete all as approved directed and specified by EIC

Providing and constructing brick work with best locally available frogged flyash bricks in CM 1:4 for walls at all levels and for all thickness in standard bonds including raking out joints 10mm deep to receive plaster, chipping of existing brick walls / concrete surfaces where ever new walls are meeting in order to arrest cracks, applying cement slurry before constructing wall to have proper bond, necessary scaffolding, curing etc., complete with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC.

Plastering external/internal brickwalls / concrete surfaces with C.M 1:4, 20 mm thick trowelled to even and smooth finish including cost of all materials, labour, curing, scaffolding, at all heights,etc. at heights mentioned below including material,scafolding etc as directed by EIC.

Providing and laying factory made chamfered edge Cement Concrete paver blocks of Classic or approved make,shape (Triarc /Dumbell / Square / Rectangular) and size , in foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer in- Charge : 60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern.

Supplying and Fixing 18-20mm thick polished/semipolished Granite slabs for flooring and cladding of required size of approved quality, colour( Sadarali grey,Jet black,Lavender blue / Shimoga Red/Cheery Red/Ruby red for flooring and black galaxy for borders), texture and finish, jointed with cement slurry and pointed with cement mixed with pigment to match the colour, laid over a screed of Cement Mortar 1:4 (One cement : four coarse sand), 25mm average thickness including wastages,curing complete with rates including including rubbing, curing, finishing, providing holes of required diameter, providing opening to fix counter basins, cost of all material,labour,tools,transportation etc., complete all as approved, specified and directed by Engineer In Charge.

Supplying and Fixing 18-20mm thick Marbel cladding -Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble or approved colour for marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade.

Providing half round nosing of edges of marbel/granite slab of 18-20 mm thick including polishing etc, complete as specified and directed by Engineer In Charge.

Supplying and providing structural tensile roof sheeting, works for entrance of building with cantilever/column supporting structure includes the fabrication of structural steel of Tata/Apollo/equivalent for main and distribution members with hardware and accessories with installation and tensioning of membrane roof and fine cutting and finishing,painted with approved shade-The tensile fabric of -FERRARI/SIOEN-T2103 Tensile Membrane Fabric structure in desired profile as per HAL approved drawing , with Flexlight perform approved Make with 950 GSM havingminimum Tensile strength Warp/Weft) 420/420 daN/5 cm & minimum tearstrength (Warp/Weft) of 50 / 50 da N, Multi composed PVDF-lacquer system on both sides, UV-protected should be weldable without grinding having a minimum weight of 950 gm/sqm with a minimum 15 years warranty etc. over steel structure frames with all fittings and fixtures such as Galvanized MS End Plate ,Shackles, Rigging Screws , Turnbuckles, swedge, fork , keder rods & galvanized MS strands with stainless steel end terminals complete as per Drawing / Detail & as per particular/ technical specifications and manufacturer guarantee-15 years including cost of tensile fabric,structural steel,powder coating charges,welding,bending of members, material,labour,installation,fixing to pedestle/columns/concrete surface with HILTI bolts or equivalent with suitable chemical resin where wever required, with base plates for columns etc all complete as directed by EIC.Note-The structure should be designed and approved by reputed structural engineer and charges borne by contractor and drawings to be submitted to EIC.Surface area of canopy shall only be measured for payment.The height of the canopy should be minimum of 3.5mts high at centre portion or as agreeded by EIC for avoiding any obstruction to movement of vehicle .The design/model of the structure after approval of EIC shall be used for construction. 3 options/ models with plan and elevation shall be provided by the contractor and the option as finalised by HAL shall be executed as per specification.Defect liability amount will be held for period of 05 years @10% of value of tensile fabic works.

Supplying and fixing of fountain of 5feet height 2-3 stages made in polished marble/ rough granite of approved design , fixed to plumb including cost and conveyance of material, labour charges etc. as approved and directed by EIC.

Providing 304 Grade Stainless Steel pipes (preferably round pipes) of any size,thickness,shape etc of Jindal or equivalent make including SS holdfasts, SS flanges,etc of approved size and make including bending of pipes to required angle,polishing / buffing,etc and fixing the same in . The rate shall include cost of all materials,bending,fixing,welding,charges,transportation,taxes, wastage,etc all as specified and directed by EIC.

Providing 304 Grade Stainless Steel chain of 5mm thickness of any size,thickness,shape etc of Jindal or equivalent make including SS flanges,etc of approved size and make including bending of pipes to required angle,polishing / buffing,etc and fixing the same in . The rate shall include cost of all materials,bending,fixing,welding,charges,transportation,taxes, wastage,etc all as specified and directed by EIC.

Painting with synthetic enamel paint with two coats of Synthetic Enamel of ASIAN paints, ICI, BERGER or equivalent make of required colour to give an even shade preferably in alternate black and white colour all as specified and directed by EIC

Supplying, fabricating by welding and erecting M.S rolled structural members like I-Beams,channels , angles,M.S pipes, MS square pipes,pipes, chequered plate,plain flats etc in position as per the drawing by mechanical means of TATA, SAIL, RINL or equivalent make conforming to IS specification including lifting,hoisting,fixing in position by welding at site,bolting and providing a coat of Zinc Chromate primer of ASIAN paints, ICI, BERGER or equivalent make all as specified and directed by EIC.The relevant code of procedure for rolled steel section dimensions, welding ,erection and hoisting and tolerances allowed shall be complied.

Supply and installation at a height of 8.5mts, 60mm/40mm aluminum raised embossed letters as per design with 2mm acrylic female and 10mm WPC male letters, fitted with LED strip lighting and wiring, fixed on 3mm ACP sheet pf Alumaze/Citybond/equivalent make with suitable MS frame with MS structural steel supports as per requirment along with covering back with GI sheet to avoid bird/rodent menace complete with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC. .(The design of board to be approved by EIC before commencement of work,LED to have a guarantee of 3 yrs,SMPS a warranty of 02yrs)

Providing and laying screed bed of cement concrete 1:2:4 with 6mm to 12.50mm hard granite stone aggregate terrace screed bed for grading with approved water proofing chemical ,pathways etc including mechanical vibration, watering, curing,with smooth finish at all heights etc. complete with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC. .(The cost of watreproofing compund will be paid seperately.)

Providing and mixing water proofing liquid of Dr.Fixit/Sika/Fosroc in cement concrete/plaster for each 50kg work in doses by weight of cement as per manufacturer's specification including cost of tools, labour, tranasportation etc., at all heights complete all as approved /specified and directed by EIC.(Providing and mixing of waterproofing liquid for each 50kg of cement bag as per specification will be measured as 'EACH').

Supply & laying of healthy carpet Korean grass of approved make including cost of tools, labour, tranasportation etc., at all heights complete all as approved /specified and directed by EIC.

Supply & laying of good quality red earth of approved make including cost of tools, labour, tranasportation etc., at all heights complete all as approved /specified and directed by EIC.

Supply & laying of good quality fox tail palm of min. 4 feet height approved make including cost of tools, labour, tranasportation etc., at all heights complete all as approved /specified and directed by EIC.

Supply & fixing of good quality terminalia mantaly of min. 4 feet height approved make including cost of tools, labour, tranasportation etc., at all heights complete all as approved /specified and directed by EIC.

Supply,fabricating & fixing of 10mm acrylic sheet box to cover vip platform upto a height of approx.5ft with UV resistant acrylic sheet and fixing on floor to avoid toppling including cost of tools, labour, tranasportation etc., at all heights complete all as approved /specified and directed by EIC.

Providing and laying cement concrete (RCC) 1:1.5:3 using 20mm down graded hard granite i.e. stone aggregate for foundation, floor etc., wherever required, at all depths including mixing, placing in position, proper compacting,surface preparation curing, cost of all materials, labour, tools, transportation and all other incidental charges, etc., complete all as approved directed and specified by EIC

Supplying and Fabricating TMT (Fe 500 grade) reinforcement bars of all diameter, conforming to IS, for reinforcement in RCC works as per drawings, including cutting, bending, lapping, hooking, welding wherever required and placing in position with binding wires at all levels and position. Binding wire shall be of approved quality and of 16 SWG, complete with rates including cost of all material, labour, wastages, transportation charges etc., all as directed and approved by EIC.

Shifting and refixing of 9ft*8ft LED screen mounted on a single pole with necessary concrete base complete with rates including cost of all material, cost for casting rcc base, with necessary anchor rods and bolts,base plate, labour, wastages, transportation charges etc., all as directed and approved by EIC.

No Rupees Only

Sucessful offer that is L-1 (Lowest offer) will be determined including GST.

The payment terms shall be governed as per the terms indicated in General conditions of contract.

Amount towards GST will be paid along with RAR payment against invoice.

The tenderers are requested to abide by the rules of prevailing GST act.

This BOQ specification has to be read in conjunction with technical specifications and tender drawings if any. Any ambiguty in these have to be brought to the knowledge of contract section before submission of tender to avoid future claims/dispute.

HAL/HD/CE/T/26-27/4

HAL/HD/CE/T/26-27/4

Civil works for providing paver tiles, name board and canopy for ICCC building in HAL.

Description

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

GST NO.:

PAN No.:

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Average annual financial turn over during the last 3 years, ending financial year 2023 [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.

TURN OVER IN Rupees

Pls Enter Turn over in Rs. for all the 3 years

ESI & PF Nos with proof (If any)

Related Document to be Uploaded to e-Procurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

80% (One Work)

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

Pls Accept The Delarication

DECLARATION II

Pls Accept the Delaration II