REPAIR/MAINT TO ALL TYPE OF STEEL FURNITURE AND CHARPOY GI PIPE UNDER GE FATEHGARH.

Amount

Almirah Large/ Med Steel /Locker steel ( refer Drg Nos FD-1031, FD-1032,FD-127 &FD-69, FD-1033, FD-1029 & FD-1034) Taking out of unserviceable handle of almirah large/med steel/locker steel of any description & in any position and Supply & Fixing new CP handle 125mm long of cast iron/zinc CP of Godrej pattern with new nut and bolts complete all as shown in drg and directed.

Almirah Large/ Med Steel /Locker steel ( refer Drg Nos FD-1031, FD-1032,FD-127 &FD-69, FD-1033, FD-1029 & FD-103 Taking out old unserviceable locks of almirah large/med steel locker steel of any description & in any position and Supply & Fixing new locks (Make Godrej/Harrison/Link/Classic or as approved by the GE) of 50mm, 6 lever of special type brass with new nut and bolts including two steel keys Godrej pattern complete all as specified and shown in drg and directed .

Almirah Large/ Med Steel /Locker steel ( refer Drg Nos FD-1031, FD-1032,FD-127 &FD-69, FD-1033, FD-1029 & FD-103 Adjustment of the existing shelves by providing new clamps where they are missing to the almirah large/med steel/locker steel all as specified and directed

Almirah Large/ Med Steel /Locker steel ( refer Drg Nos FD-1031, FD-1032,FD-127 &FD-69, FD-1033, FD-1029 & FD-103 Taking out old unserviceable butt hinges of almirah large/med steel/locker steel of any description & in any position and Supply & Fixing new mild steel butt hinges of 65 to 75 mm long all as specified and shown in drawing.

Almirah Large/ Med Steel /Locker steel ( refer Drg Nos FD-1031, FD-1032,FD-127 &FD-69, FD-1033, FD-1029 & FD-103 Taking out old unserviceable /rusted legs of almirah large/med steel of any description & in any position and Supply & Fixing new legs made out of 22 guage MS sheet including welding and painting all as specified and shown in drg.

Almirah Large/ Med Steel /Locker steel ( refer Drg Nos FD-1031, FD-1032,FD-127 &FD-69, FD-1033, FD-1029 & FD-103 -ditto- but for Locker Steel -ditto-

Almirah Large/ Med Steel /Locker steel ( refer Drg Nos FD-1031, FD-1032,FD-127 &FD-69, FD-1033, FD-1029 & FD-103 Taking out old unserviceable/rusted shelves of almirah large steel of any description & in any position and Supply & Fixing new shelves made out of 22 guage MS sheet with two coat of synthetic enamel paint over a coat of primer all as specified and shown in drg.

Almirah Large/ Med Steel /Locker steel ( refer Drg Nos FD-1031, FD-1032,FD-127 &FD-69, FD-1033, FD-1029 & FD-103 ..ditto.. but for Almirah Med Steel ..ditto..

Almirah Large/ Med Steel /Locker steel ( refer Drg Nos FD-1031, FD-1032,FD-127 &FD-69, FD-1033, FD-1029 & FD-103 -ditto- but for Locker Steel -ditto.

Almirah Large/ Med Steel /Locker steel ( refer Drg Nos FD-1031, FD-1032,FD-127 &FD-69, FD-1033, FD-1029 & FD-103 Repair to dent, deshaped portion, Derusting and cleaning of rusted surfaces by sand paper including preparation of patches by applying putty etc of almirah large/Book Case or shelf steel and applying one coat of red oxide primer on patched and where required for smoothing surfaces and applying one coat AD silver gray/OG synthetic enamel paint (Make : 1st quality of Shalimar/Burgur/Dulex /Asian) of required finish by spray painting(by spray Gun) to internal and external surfaces of almirah larger all as specified and directed.

Almirah Large/ Med Steel /Locker steel ( refer Drg Nos FD-1031, FD-1032,FD-127 &FD-69, FD-1033, FD-1029 & FD-103 ..ditto.. but for Almirah Med Steel ..ditto..

Almirah Large/ Med Steel /Locker steel ( refer Drg Nos FD-1031, FD-1032,FD-127 &FD-69, FD-1033, FD-1029 & FD-103 ..ditto.. but for Locker Steel ..ditto..

Almirah Large/ Med Steel /Locker steel ( refer Drg Nos FD-1031, FD-1032,FD-127 &FD-69, FD-1033, FD-1029 & FD-103 Taking out existing old MS handle of bow type from Locker Bed Side Steel of any description & in any position and supply & fixing new MS handles chromium plated suitable for Locker Bed Side Steel. MS handle chromium plated will be fixed with shutter of Locker Bed Side Steel, rest all as per Drg and directed.

Almirah Large/ Med Steel /Locker steel ( refer Drg Nos FD-1031, FD-1032,FD-127 &FD-69, FD-1033, FD-1029 & FD-103 Taking out existing unserviceable lock key cap of Almirah steel large/medium/locker steel. of any description & in any position and supply & fixing for lock cap of almirah steel large/medium. Lock key cap will be fixed by riveted or screws as applicable, rest all as per Drg and directed.

Almirah Large/ Med Steel /Locker steel ( refer Drg Nos FD-1031, FD-1032,FD-127 &FD-69, FD-1033, FD-1029 & FD-103 Taking out unserviceable three way locking device mechnism from Almirah Large/Almirah med/Locker steel/Almirah 1/2H-1/2S Steel of any description & in any position and supply & fixing new three way locking device mecanism duly painted with two coat of synthetic enemal paint over coat of primer comlete all as specified and directed.

Almirah Large/ Med Steel /Locker steel ( refer Drg Nos FD-1031, FD-1032,FD-127 &FD-69, FD-1033, FD-1029 & FD-103 Taking out existing old unserviceable Haspe and Staple of Locker Bed Side Steel. of any description & in any position and supply & fixing new Hasps and Staple suitable for Locker Bed Side Steel,rest all as per Drg and directed.

Almirah Large/ Med Steel /Locker steel ( refer Drg Nos FD-1031, FD-1032,FD-127 &FD-69, FD-1033, FD-1029 & FD-103 Taking out old unserviceable Bush from handle of almirah large/ med/locker steel handle of any description & in any position and supply & fixing new Bush of required size as directed.

Almirah Large/ Med Steel /Locker steel ( refer Drg Nos FD-1031, FD-1032,FD-127 &FD-69, FD-1033, FD-1029 & FD-103 Taking out unserviceable Hanging rod from Locker steel/Almirah 1/2H-1/2S Steel of any description & in any position and supply & fixing new Hanging rod 20mm dia steel crominium plated conduit pipe of wall thickness 1.25 mm comlete all as shown in drg and directed.

Almirah Large/ Med Steel /Locker steel ( refer Drg Nos FD-1031, FD-1032,FD-127 &FD-69, FD-1033, FD-1029 & FD-103 Taking out unserviceable inside lock cover of any description & in any position and supply & fixing new lock cover inside of Almirah Large/Med/Locker steel as shown in drg and directed.

Almirah Large/ Med Steel /Locker steel ( refer Drg Nos FD-1031, FD-1032,FD-127 &FD-69, FD-1033, FD-1029 & FD-103 Taking out unserviceable sockets from Locker steel of any description & in any position and supply & fixing new Sockets all as specified and shown in Drg.

Table Office Officer/ Table Office clerk steel (refer Drg Nos (FD-84,FD-1003,FD-1004,FD-1005,FD-1006 & FD-1002) Taking out of unserviceable locks of drawer/cabinet box of table office officers/clerk steel of any description & in any position and Supply & Fixing new locks of 40mm six lever of special type brass ( Make Godrej/Harrison/Link or as approved by the GE) with new nuts and bolts key complete all as per drawing and directed.

Table Office Officer/ Table Office clerk steel (refer Drg Nos (FD-84,FD-1003,FD-1004,FD-1005,FD-1006 & FD-1002) Cutting out old unserviceable square conduit pipe of table frame of any description & in any position and Supply & Fixing new square conduit pipe 25mmx25mmx1.50mm thick including welding & painting as shown in drawing and directed by Engineer-in-Charge.

Table Office Officer/ Table Office clerk steel (refer Drg Nos (FD-84,FD-1003,FD-1004,FD-1005,FD-1006 & FD-1002) Taking out old unserviceable top of table office officer steel of any description & in any position and Supply & Fixing new table top of size 1370 x 760 mm made of 18 mm thick prelaminated particle board on both faces (one side teak face and other side white colour) exterior grade, fixed with 4mm teak wood beading around the table top including polish to beading, fixed to table frame by steel screws complete all as specified and shown on Drg and directed.

Table Office Officer/ Table Office clerk steel (refer Drg Nos (FD-84,FD-1003,FD-1004,FD-1005,FD-1006 & FD-1002) …..ditto…. as above but table office clerk steel but size 1200 x 600 mm…ditto…..

Table Office Officer/ Table Office clerk steel (refer Drg Nos (FD-84,FD-1003,FD-1004,FD-1005,FD-1006 & FD-1002) ….ditto….. but table office clerk/typist steel but size 1200 x 900 mm…ditto…

Table Office Officer/ Table Office clerk steel (refer Drg Nos (FD-84,FD-1003,FD-1004,FD-1005,FD-1006 & FD-1002) Derusting/cleaning and applying one coats of silver gray/green hammer tone synthetic enamel paint of required shade/colour by spray painting to internal/extenal surfaces of table office officer, all as specified and directed.

Table Office Officer/ Table Office clerk steel (refer Drg Nos (FD-84,FD-1003,FD-1004,FD-1005,FD-1006 & FD-1002) …ditto…. above but table office clerk/typiest steel….dtto…

Table Office Officer/ Table Office clerk steel (refer Drg Nos (FD-84,FD-1003,FD-1004,FD-1005,FD-1006 & FD-1002) M&L for preparation of dent/dismental/deshaped of steel cabinet of Table Office Officer/Clerk/Typiest steel drawers all as specified and directed

Table Office Officer/ Table Office clerk steel (refer Drg Nos (FD-84,FD-1003,FD-1004,FD-1005,FD-1006 & FD-1002) Taking out unserviceable hard rubber PVC cap from drawer of Table Officer/Clerkof any description & in any position and Supply & Fixing new PVC cap of size 150 x 50 mm and depth not less then 30 mm all as specified and directed

Table Office Officer/ Table Office clerk steel (refer Drg Nos (FD-84,FD-1003,FD-1004,FD-1005,FD-1006 & FD-1002) Taking out unserviceable steel drawer of Table Officer Officer/Clerk steel of any description & in any position and Supply & Fixing new drawer including painting all as specified and shown in drawing and directed by Engr-in-Charge

Form with back/without back( refer Drg Nos ( FD-1027, FD-78 (M) & FD-77 (M) ) Derusting/cleaning of iron part of form with and w/o back and applying one coats of black/green synthetic enamel paint of required shade/colour by spray painting , all as specified and directed.

Form with back/without back( refer Drg Nos ( FD-1027, FD-78 (M) & FD-77 (M) ) Taking out old unserviceable nut and bolt from form with and w/o back any description & in any position and Supply & Fixing nut and bolt of required size all as specified and shown in drg.Rest all as directed.

Form with back/without back( refer Drg Nos ( FD-1027, FD-78 (M) & FD-77 (M) ) Taking out old unserviceable seat and S&F of seat made out 2nd class hard wood teak of size 1800mmx235mmx25mm fixing with round head nut & bolt 75mmx6mm to the MS frame of form wiith and without back including polishing to wooden back seat complet all as specified and directed.

Form with back/without back( refer Drg Nos ( FD-1027, FD-78 (M) & FD-77 (M) ) Taking out old unserviceable back rest and S&F of back rest made out 2nd class hard wood teak of size 1800mmx150mmx18mm fixing with round head nut & bolt 75mmx6mm to the MS frame of form wiith and without back including polishing to wooden back seat complet all as specified and directed.

Form with back/without back( refer Drg Nos ( FD-1027, FD-78 (M) & FD-77 (M) ) Cutting of worn out/broken leg of form with and without back and S&F new new square round MS Pipe 1.6mmthick of required size and fixing with gas welding complet all as specified and directed.

Form with back/without back( refer Drg Nos ( FD-1027, FD-78 (M) & FD-77 (M) ) M&L welding to broken joint of form with and without back

Tuck welding M&L for jointing of broken part of steel furniture by tuck welding including painting all as directed.

Table Dining OR refer Drg Nos ( FD-165M & FD-1007 ) Derusting/cleaning and applying one coat of synthetic enamel black paint of required shade/colour by spray painting all as specified and directed.

Table Dining OR refer Drg Nos ( FD-165M & FD-1007 ) Taking down old unserviceable top of table dining OR. of any description & in any position and Supply & Fixing new top size 1830 x 590 mm made out of 19mm thick block board with 22 guage aluminum sheet of same size on top, fixed with screws on top of 25 x 25mm square pipe frame as shown in drg complete all as specified and directed.

Table Dining OR refer Drg Nos ( FD-165M & FD-1007 ) Cutting out old unserviceable square conduit pipe of table frame new square conduit pipe 25mmx25mmx1.50mm thick including two coat of synthetic eamel paint as shown in drawing and directed by Engineer-in-Charge.

Chair Varandah ( refer ( FD-256/259/359/FD-19 (M)/MAP-II/15) Recaning of chair varandah with plastic cane 4 mm wide (white) including taking out all unsv cane from the chair and apply one coat of synthatic enamal paint in white colour complete all as per shown on drawing and directed.

Chair Varandah ( refer ( FD-256/259/359/FD-19 (M)/MAP-II/15) Taking out of old unserviceable PVC toes of chair Verandah and of any description & in any position and Supply & Fixing new PVC toes of chair Verandah. PVC toes should be of best quality all as shown in drawing and directed.

Chair Varandah ( refer ( FD-256/259/359/FD-19 (M)/MAP-II/15) Repairs to broken mild steel components of chair verandah with gas welding all as specified and directed all as specified and directed.

Chair Varandah ( refer ( FD-256/259/359/FD-19 (M)/MAP-II/15) Removing old broken leg of chair verandah and providing new 20mm dia ms pipe 1.6mm thick cimplete with welding all as specified and directed .

Chair Varandah ( refer ( FD-256/259/359/FD-19 (M)/MAP-II/15) Removing old broken PVC seat & Back of each verandah and S&F new PVC Seat and back 4mm thick as specified and directed

Table with drawer /without drawer refer Drg No ( FD-1005/1008/1009/1007) M&L for preparing old painted steel surfaces of Table 900x600x760mm with and without drawer with one coat of synthetic enamel green paint on surfaces complete all as specified and directed.

Table with drawer /without drawer refer Drg No ( FD-1005/1008/1009/1007) M&L for preparing old painted steel surfaces of Table 900x900x760mm with and without drawer with one coat of synthetic enamel green paint on surfaces complete all as specified and directed.

Table with drawer /without drawer refer Drg No ( FD-1005/1008/1009/1007) Cutting out old unserviceable square conduit pipe of table frame and S&F new square conduit pipe 25mmx25mmx1.50mm thick inclusing two coats synthetic enamel paint as shown in drawing and directed by Engineer-in-Charge.

Table with drawer /without drawer refer Drg No ( FD-1005/1008/1009/1007) Taking out old unserviceable top of table 900X600X760 mm with and without drawer of any description & in any position and Supply & Fixing new table top of size 900X600x760mm made of 18 mm thick prelaminated particle board on both faces (one side teak face and other side white colour) exterior grade, with 4mm thick teak wood beading around the table top including polish to beading and fine finish, fixed to table frame by steel screws complete all as shown on Drg and directed.

Table with drawer /without drawer refer Drg No ( FD-1005/1008/1009/1007) Taking out old unserviceable top of table 900X900X760 mm of any description & in any position and Supply & Fixing new table top of size 900X900x760mm made of 18 mm thick prelaminated particle board on both faces (one side teak face and other side white colour) exterior grade, with 4mm thick teak wood beading around the table top including polish and fine finish, fixed to table frame by steel screws complete all as shown on Drg and directed .

Desk steel (FD 1021,FD-48) M&L for preparing old painted steel surfaces of Desk steel with one coat of synthetic enamel paint on surfaces complete all as specified and directed.

Desk steel (FD 1021,FD-48) Taking out unserviceable Top/Bottom from box of Desk steel of any description & in any position and Supply & Fixing of new Top / bottom of Size 1210 x 530 mm made out of pre laminated particle board 18 mm thick as specified and shown in drawing.

Desk steel (FD 1021,FD-48) Taking out unserviceable side from box of Desk steel of any description & in any position and Supply & Fixing of new side of Size 530 x 195 made out of pre laminated particle board 18 mm thick as specified and shown in drawing.

Desk steel (FD 1021,FD-48) Taking out unserviceable Back from box of Desk steel and S&F of new Back of Size 1210 x 195 made out of pre laminated particle board 12 mm thick as specified and shown in drawing.

PVC Hard rubber shoe /Toe Taking out unserviceable rubber shoe from table steel of any description & in any position and Supply & Fixing of rubber shoe to the bottom of legs of table steel in shape as specified and directed.

Chair steel tubular with and without arm (FD- 75M) Opening out old unsv seat of any description & in any position and Supply & Fixing new seat suitable for steel tubular chair size as reqd made of seasoned teak/shesham wood duly caned with half round 2mm plastic cane of best quality (Make Shah/premier/Garware) and duly painted with black synthetic enamel paint two coat to achieve good finish after preparing well smooth surface of frame over a coats of primer all as specified and directed.

Chair steel tubular with and without arm (FD- 75M) …..ditto….as above but back of chair steel tubular….ditto…

Chair steel tubular with and without arm (FD- 75M) M&L for S&F of broken MS leaf making one hole reqd shape and size rest of seat and back of chair steel tubular/chair spl size 50 x 25 x 3mm all as specified and directed

Chair steel tubular with and without arm (FD- 75M) Opening out unsv wooden handle of chair steel tubular of any description & in any position and Supply & Fixing new handle made out of seasoned teak/shisham wood and painted with two coats of black synthetic enamel paint over a coat of primer to achieve good finish after preparing well smooth surface all as specified and directed.

Chair CBA Spl with handrest steel FD-120(M) FD-260 Taking out old u/s PVC moulded Seat of Chair CB speical with hand rest and S&F new PVC moulded seat as per sample (Make:- Nilkamal CHR-10) complete all as shown on drawing as specified & directed by Engr-in-Charge.

Chair CBA Spl with handrest steel FD-120(M) FD-260 Opening out old unsv hand rest of chair spl steel with hand rest and S&F new hand rest made out of prelaminated particle board 12mm thick of required shape and size around the 1mm thick plastic beading to achieve good finish after preparing well smooth surface all as specified and directed.

Chair CBA Spl with handrest steel FD-120(M) FD-260 Cleaning, derusting at stain/dirt with sand paper, making the surface smooth, filling the holes with putty wherewhere required to chair steel with arm and apply two coats of synthetic enamel paint green before fixing of seat and back of chair complete all as specified and directed.

Chair CBA Spl with handrest steel FD-120(M) FD-260 …...ditto….. As above but for chair sheet withot arm….ditto…

Chair CBA Spl with handrest steel FD-120(M) FD-260 Removing old u/s PVC inside circular cap from chair steel of any description & in any position and Supply & Fixing new circular cap all specified and directed.

Charpoy GI Pipe / Charpoy GI pipe with ply top / Charpoy Tubular (FD-220) Removing of unserviceable each long rail having both threaded ends broken of any description & in any position and Supply & Fixing new long rail of GI tubing 32mm bore medium grade (Make : Jindal/TATA/Prakash) duly threaded both ends complete all as per drg and as directed.

Charpoy GI Pipe / Charpoy GI pipe with ply top / Charpoy Tubular (FD-220) Removing of old unserviceable short rail having both threaded ends broken and fixing of two Nos short rails made from cutting of long rail obtained from above threading the both ends of short rails and fixing in position complete all as specified and directed.

Charpoy GI Pipe / Charpoy GI pipe with ply top / Charpoy Tubular (FD-220) Removing of unserviceable legs, threading and fixing legs made from cutting of short rails obtained from above and fixing in position complete all as specified and directed.

Charpoy GI Pipe / Charpoy GI pipe with ply top / Charpoy Tubular (FD-220) Removing of existing cracked deshaped or unserviceable elbow of any description & in any position and Supply & Fixing new 32mm bore GI elbow (ISI mark) three way complete all as specified and directed

Charpoy GI Pipe / Charpoy GI pipe with ply top / Charpoy Tubular (FD-220) Removing of existing cracked deshaped or unserviceable check nut of any description & in any position and Supply & Fixing new 32mm bore GI check nut (thickness of check nut shall not be less than 6mm) ISI marked all as specified and directed.

Charpoy GI Pipe / Charpoy GI pipe with ply top / Charpoy Tubular (FD-220) Removing of old unserviceable ply top from Charpoy GI Pipe, tightening of loose all components (ie complete charpoy), of any description & in any position and Supply & Fixing ply wood of size 1980 x 900 x 12mm thick BWP grade ISI marked with mild steel galvanised iron nuts and bolts of 6mm dia and suitable size long including fixing of PVC beading all round to plywood complete all as specified and directed.

Charpoy GI Pipe / Charpoy GI pipe with ply top / Charpoy Tubular (FD-220) Removing old broken/damaged welded supports MS Flate from charpoy GI Pipe 32mm. S&F new stiffeners made of MS flat size 40 mm x 06mm x 850mm long and welded to long rail horizontally at equal distance including hole where ever required suitable for fixing ply wood and painting steel surfaces with two coat of black enamel paint complete all as specified and as directed by Engr-in-charge

Charpoy GI Pipe / Charpoy GI pipe with ply top / Charpoy Tubular (FD-220) Taking out old unserviceable cotton/nylone newar from Charpoy GI pipe and supply and fixing new 12 mm thick commercial ply wood of size 1980 x 900mm BWP grade ISI marked with 6mm x 35mm nut & bolt of flat iron stiffeners 03 Nos of size 40 mm x 06mm x 850mm long and welded to long rail horizontally at equal distance including hole where ever required suitable for fixing ply wood and painting steel surfaces with two coat of black enamel paint complete all as specified and as directed by Engr-in-charge

Charpoy GI Pipe / Charpoy GI pipe with ply top / Charpoy Tubular (FD-220) Removing of existing broken, deshaped/dismental/missing or unserviceable iron clamp and S&F new iron clamp both side open 3mm thick with two coat of synthetic enamel paint over a coat of primer complete all as specified and shown in drg./

Charpoy GI Pipe / Charpoy GI pipe with ply top / Charpoy Tubular (FD-220) ….ditto….. As above but one side closed…ditto…

Charpoy GI Pipe / Charpoy GI pipe with ply top / Charpoy Tubular (FD-220) Removing of existing cracked and unserviceable bottom wooden toe from leg of charpoy and S&F new bottom wooden toe of 32 dia at leg of charpoy making hole as and where required tightening of wooden ring with two Nos of screw complete all as specifed and directed.

Bed Hare Steel FD/E6/MAP/8 (R ) M&l removal of unserviceable ply wood of bed and S&F new ply wood 12mm thick BWER grade, ISI marked including fixing with suitable size screw & cup washer complete all as shown on drg and specified.

Bed Hare Steel FD/E6/MAP/8 (R ) M&L for retightning of loose cimponents of bed including welding where ever required on joints, replacement of old nuts & bolts where ever required and touching up on welded points with synthetic enamel paint of same colour/shade all as shown on Drg & Specified .

Bed Hare Steel FD/E6/MAP/8 (R ) M&L for removal of prelamainted particle boared headrest of bed and S&F new 18mm thick prelamainted particle boare exterior grade minume faced veneered both side decorated (ISI Marked) with 4mm thick teak wood beading of sutable size including fixing in position with screws & washer cimplete all as specified and shown in drg.

Bed Hare Steel FD/E6/MAP/8 (R ) M&L for removal of prelamainted particle boared foot rest of bed and S&F new 18mm thick prelamainted particle boare exterior grade minume faced veneered both side decorated (ISI Marked) with 4mm thick teak wood beading of sutable size including fixing in position with screws & washer complete all as specified and shown in drg.

Charpoy IP folding FD-388 ( R) Rovmoving of old unserviceable charpoy top and S&F new top of 8-9mm thick plywood BWR grade (ISI Marked)with appropriate size nut bolts & washer including thightng the losse cimponents complete all as specified and shown in drg.

Charpoy IP folding FD-388 ( R) Removing of old unserviceable members of charpoy folding and S&F new members of 25mm dia 2mm thick MS Conduct fixed with gas welding specified and shown in drg.

Charpoy IP folding FD-388 ( R) M&L for preparation of old painted steel surfaces by scraping/rubbing with sand paper and filling depressions with putty where ever required and applying one coat of synthetic enamel paint of approved shade complete all as specified in drg and directed .

Charpoy IP Hard FD/MAP-II/01 TopRemoving of old unserviceable ply wood from charpoy and S&F new 12mm thick plywood BWR grade(ISI Marked) to the top of charpoy IP of appropriate size including fixing to charpoy using nuts, bolts and washer as shown on drg complete all as specified in drg and directed.

Charpoy IP Hard FD/MAP-II/01 M&L for preparation of old painted steel surfaces by scraping/rubbing with sand paper and filling depressions with putty where ever required and applying one coat of synthetic enamel paint of approved shade complete all as specified in drg and directed

Stool Steel 305x305x510 FD-81M Preparation of od painted surface and applying one coat of Olive Green synthetic enamel paint cimplete all as specified and directed.

Stool Steel 305x305x510 FD-81M Removing of old unserviceable stool top and S&F new top of stool of 1.6mm thick MS sheet ( Top size 305x305) complete all asspecified and shown on drawing

Chair Push Back/Tip up TP Model /Jupiter Make Godrej Take out old unsv bottom seat and S&F new bottom seat with 19mm thick ply wood commercial shall be fixed including 75mm thick foam cushion of 32 density with upholstered with cloth velvet as approved of approved shape and texture to match with existing and as directed by Engr-in-charge.

Chair Push Back/Tip up TP Model /Jupiter Make Godrej Take out old unsv back rest frame and S&F new seat of back support with velvet as approved of approved shape and quality including necessary welding, M.S. bolts etc as per exiting pattern and directed by Engr-in-charge.

Chair Push Back/Tip up TP Model /Jupiter Make Godrej Take out old unsv fiber hand rest of chair push back and S&F new hand rest of same specification all as specified and directed.

Chair Push Back/Tip up TP Model /Jupiter Make Godrej Tightening of loose all componets (ie complete) chair push back with mild steel galvanised iron nuts and bolts of 6mm dia and suitable size long complete all as specified and directed.

GUJRAL BUILDERS

HINDUSTAN ENGINEERING WORKS

ANAND FURNITURE

M.R. ENTERPRISES

M/S SRI JAGDAMBE TRADERS